The DOI matches its Crossref record; 266 of the 266 references it cites were found in a registry or an index.
Freeze Casting: From Low‐Dimensional Building Blocks to Aligned Porous Structures—A Review of Novel Materials, Methods, and Applications
Open accessAbstract
Freeze casting, also known as ice templating, is a particularly versatile technique that has been applied extensively for the fabrication of well‐controlled biomimetic porous materials based on ceramics, metals, polymers, biomacromolecules, and carbon nanomaterials, endowing them with novel properties and broadening their applicability. The principles of different directional freeze‐casting processes are described and the relationships between processing and structure are examined. Recent progress in freeze‐casting assisted assembly of low dimensional building blocks, including graphene and carbon nanotubes, into tailored micro‐ and macrostructures is then summarized. Emerging trends relating to novel materials as building blocks and novel freeze‐cast geometries—beads, fibers, films, complex macrostructures, and nacre‐mimetic composites—are presented. Thereafter, the means by which aligned porous structures and nacre mimetic materials obtainable through recently developed freeze‐casting techniques and low‐dimensional building blocks can facilitate material functionality across multiple fields of application, including energy storage and conversion, environmental remediation, thermal management, and smart materials, are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Biomimetic superelastic graphene-based cellular monoliths
Qiu, L., Liu, J. Z., Chang, S. L. Y., Wu, Y., & Li, D. (2012) · Nature Communications · doi:10.1038/ncomms2251 · Cited by 1,250
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Graphene chiral liquid crystals and macroscopic assembled fibres
Xu, Z., & Gao, C. (2011) · Nature Communications · doi:10.1038/ncomms1583 · Cited by 1,112
Zhang, P., Li, J., Lv, L., Zhao, Y., & Qu, L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01965 · Cited by 1,081
Synthetic nacre by predesigned matrix-directed mineralization
Mao, L.-B., Gao, H.-L., Yao, H.-B., Liu, L., Cölfen, H., Liu, G., Chen, S.-M., Li, S.-K., Yan, Y.-X., Liu, Y.-Y., et al. (2016) · Science · doi:10.1126/science.aaf8991 · Cited by 983
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Zhao, S., Zhang, H.-B., Luo, J.-Q., Wang, Q.-W., Xu, B., Hong, S., & Yu, Z.-Z. (2018) · ACS Nano · doi:10.1021/acsnano.8b05739 · Cited by 893
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
Graphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
Zeng, Z., Jin, H., Chen, M., Li, W., Zhou, L., & Zhang, Z. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503579 · Cited by 849
Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles
Zhang, H., Hussain, I., Brust, M., Butler, M. F., Rannard, S. P., & Cooper, A. I. (2005) · Nature Materials · doi:10.1038/nmat1487 · Cited by 813
Double-negative-index ceramic aerogels for thermal superinsulation
Xu, X., Zhang, Q., Hao, M., Hu, Y., Lin, Z., Peng, L., Wang, T., Ren, X., Wang, C., Zhao, Z., et al. (2019) · Science · doi:10.1126/science.aav7304 · Cited by 793
Strong, Conductive, Lightweight, Neat Graphene Aerogel Fibers with Aligned Pores
Xu, Z., Zhang, Y., Li, P., & Gao, C. (2012) · ACS Nano · doi:10.1021/nn3021772 · Cited by 681
Si, Y., Wang, X., Dou, L., Yu, J., & Ding, B. (2018) · Science Advances · doi:10.1126/sciadv.aas8925 · Cited by 673
A Thermally Insulating Textile Inspired by Polar Bear Hair
Cui, Y., Gong, H., Wang, Y., Li, D., & Bai, H. (2018) · Advanced Materials · doi:10.1002/adma.201706807 · Cited by 648
Han, J., Du, G., Gao, W., & Bai, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900412 · Cited by 620
Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C. (2015) · Small · doi:10.1002/smll.201502173 · Cited by 618
Fabrication of Graphene–Polymer Nanocomposites With Higher‐Order Three‐Dimensional Architectures
Vickery, J. L., Patil, A. J., & Mann, S. (2009) · Advanced Materials · doi:10.1002/adma.200803606 · Cited by 606
Superstructured Assembly of Nanocarbons: Fullerenes, Nanotubes, and Graphene
Li, Z., Liu, Z., Sun, H., & Gao, C. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00102 · Cited by 554
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Cheng, C., Li, S., Thomas, A., Kotov, N. A., & Haag, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00520 · Cited by 527
Preparation of graphene oxide aerogel and its adsorption for Cu2+ ions
Mi, X., Huang, G., Xie, W., Wang, W., Liu, Y., & Gao, J. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.013 · Cited by 507
Si, Y., Wang, X., Yan, C., Yang, L., Yu, J., & Ding, B. (2016) · Advanced Materials · doi:10.1002/adma.201603143 · Cited by 503
Recent advances in three-dimensional graphene based materials for catalysis applications
Qiu, B., Xing, M., & Zhang, J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00904f · Cited by 502
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Ultralight, Recoverable, and High-Temperature-Resistant SiC Nanowire Aerogel
Su, L., Wang, H., Niu, M., Fan, X., Ma, M., Shi, Z., & Guo, S.-W. (2018) · ACS Nano · doi:10.1021/acsnano.7b08577 · Cited by 496
Zhai, H., Xu, P., Ning, M., Cheng, Q., Mandal, J., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00715 · Cited by 490
Bioinspired large-scale aligned porous materials assembled with dual temperature gradients
Bai, H., Chen, Y., Delattre, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Science Advances · doi:10.1126/sciadv.1500849 · Cited by 483
Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method
Wu, X., Liu, Y., Li, X., Wen, P., Zhang, Y., Long, Y., Wang, X., Guo, Y., Xing, F., & Gao, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.041 · Cited by 457
Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure
Gao, H.-L., Zhu, Y.-B., Mao, L.-B., Wang, F.-C., Luo, X.-S., Liu, Y.-Y., Lu, Y., Pan, Z., Ge, J., Shen, W., et al. (2016) · Nature Communications · doi:10.1038/ncomms12920 · Cited by 455
Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2008) · Chemistry of Materials · doi:10.1021/cm702028z · Cited by 450
3D Freeze‐Casting of Cellular Graphene Films for Ultrahigh‐Power‐Density Supercapacitors
Shao, Y., El‐Kady, M. F., Lin, C., Zhu, G., Marsh, K. L., Hwang, J. Y., Zhang, Q., Li, Y., Wang, H., & Kaner, R. B. (2016) · Advanced Materials · doi:10.1002/adma.201506157 · Cited by 447
Multiwall carbon nanotube scaffolds for tissue engineering purposes
Abarrategi, A., Gutiérrez, M. C., Moreno-Vicente, C., Hortigüela, M. J., Ramos, V., López-Lacomba, J. L., Ferrer, M. L., & del Monte, F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.021 · Cited by 435
Zhang, Q., Yi, G., Fu, Z., Yu, H., Chen, S., & Quan, X. (2019) · ACS Nano · doi:10.1021/acsnano.9b06180 · Cited by 420
Li, J., Li, J., Meng, H., Xie, S., Zhang, B., Li, L., Ma, H., Zhang, J., & Yu, M. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14725h · Cited by 415
Bai, H., Walsh, F., Gludovatz, B., Delattre, B., Huang, C., Chen, Y., Tomsia, A. P., & Ritchie, R. O. (2016) · Advanced Materials · doi:10.1002/adma.201504313 · Cited by 410
Freeze-Casting Produces a Graphene Oxide Aerogel with a Radial and Centrosymmetric Structure
Wang, C., Chen, X., Wang, B., Huang, M., Wang, B., Jiang, Y., & Ruoff, R. S. (2018) · ACS Nano · doi:10.1021/acsnano.8b01747 · Cited by 392
Biomimetic Architectured Graphene Aerogel with Exceptional Strength and Resilience
Yang, M., Zhao, N., Cui, Y., Gao, W., Zhao, Q., Gao, C., Bai, H., & Xie, T. (2017) · ACS Nano · doi:10.1021/acsnano.7b01815 · Cited by 389
Construction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389
Lian, G., Tuan, C.-C., Li, L., Jiao, S., Wang, Q., Moon, K.-S., Cui, D., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01595 · Cited by 382
Aligned Porous Structures by Directional Freezing
Zhang, H., & Cooper, A. I. (2007) · Advanced Materials · doi:10.1002/adma.200700154 · Cited by 379
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Biomaterials by freeze casting
Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0014 · Cited by 375
Graphene fiber: a new trend in carbon fibers
Xu, Z., & Gao, C. (2015) · Materials Today · doi:10.1016/j.mattod.2015.06.009 · Cited by 375
Min, P., Liu, J., Li, X., An, F., Liu, P., Shen, Y., Koratkar, N., & Yu, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805365 · Cited by 375
Freeze casting of porous materials: review of critical factors in microstructure evolution
Li, W. L., Lu, K., & Walz, J. Y. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000011 · Cited by 372
Environmental performance of graphene-based 3D macrostructures
Yousefi, N., Lu, X., Elimelech, M., & Tufenkji, N. (2019) · Nature Nanotechnology · doi:10.1038/s41565-018-0325-6 · Cited by 371
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
Wang, X., Zhai, H., Qie, B., Cheng, Q., Li, A., Borovilas, J., Xu, B., Shi, C., Jin, T., Liao, X., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.051 · Cited by 364
Mi, H.-Y., Jing, X., Politowicz, A. L., Chen, E., Huang, H.-X., & Turng, L.-S. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.033 · Cited by 362
Sambyal, P., Iqbal, A., Hong, J., Kim, H., Kim, M.-K., Hong, S. M., Han, M., Gogotsi, Y., & Koo, C. M. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12550 · Cited by 361
Xu, W., Xing, Y., Liu, J., Wu, H., Cui, Y., Li, D., Guo, D., Li, C., Liu, A., & Bai, H. (2019) · ACS Nano · doi:10.1021/acsnano.9b02331 · Cited by 355
Han, M., Yin, X., Hantanasirisakul, K., Li, X., Iqbal, A., Hatter, C. B., Anasori, B., Koo, C. M., Torita, T., Soda, Y., et al. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900267 · Cited by 342
Highly Porous Fibers by Electrospinning into a Cryogenic Liquid
McCann, J. T., Marquez, M., & Xia, Y. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056810y · Cited by 337
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705651 · Cited by 332
Yu, R., Shi, Y., Yang, D., Liu, Y., Qu, J., & Yu, Z.-Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04655 · Cited by 325
Highly stretchable carbon aerogels
Guo, F., Jiang, Y., Xu, Z., Xiao, Y., Fang, B., Liu, Y., Gao, W., Zhao, P., Wang, H., & Gao, C. (2018) · Nature Communications · doi:10.1038/s41467-018-03268-y · Cited by 313
Yu, Z.-L., Yang, N., Zhou, L.-C., Ma, Z.-Y., Zhu, Y.-B., Lu, Y.-Y., Qin, B., Xing, W.-Y., Ma, T., Li, S.-C., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat7223 · Cited by 310
Li, X.-H., Li, X., Liao, K.-N., Min, P., Liu, T., Dasari, A., & Yu, Z.-Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12295 · Cited by 307
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Jiang, Y., Chen, Y., Liu, Y.-J., & Sui, G.-X. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.131 · Cited by 302
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Tang, X., Zhou, H., Cai, Z., Cheng, D., He, P., Xie, P., Zhang, D., & Fan, T. (2018) · ACS Nano · doi:10.1021/acsnano.8b00304 · Cited by 290
Liu, T., Huang, M., Li, X., Wang, C., Gui, C.-X., & Yu, Z.-Z. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.038 · Cited by 288
Huang, W., Dai, K., Zhai, Y., Liu, H., Zhan, P., Gao, J., Zheng, G., Liu, C., & Shen, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16975 · Cited by 287
Mesoscale assembly of chemically modified graphene into complex cellular networks
Barg, S., Perez, F. M., Ni, N., do Vale Pereira, P., Maher, R. C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C., & Saiz, E. (2014) · Nature Communications · doi:10.1038/ncomms5328 · Cited by 285
Graphene Oxide Restricts Growth and Recrystallization of Ice Crystals
Geng, H., Liu, X., Shi, G., Bai, G., Ma, J., Chen, J., Wu, Z., Song, Y., Fang, H., & Wang, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201609230 · Cited by 278
Si, Y., Wang, L., Wang, X., Tang, N., Yu, J., & Ding, B. (2017) · Advanced Materials · doi:10.1002/adma.201700339 · Cited by 277
Biological Nanofibrous Generator for Electricity Harvest from Moist Air Flow
Li, M., Zong, L., Yang, W., Li, X., You, J., Wu, X., Li, Z., & Li, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901798 · Cited by 276
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Nanoengineering Super Heat-Resistant, Strong Alumina Aerogels
Zu, G., Shen, J., Zou, L., Wang, W., Lian, Y., Zhang, Z., & Du, A. (2013) · Chemistry of Materials · doi:10.1021/cm402900y · Cited by 264
Ultralight MXene-based aerogels with high electromagnetic interference shielding performance
Bian, R., He, G., Zhi, W., Xiang, S., Wang, T., & Cai, D. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc04795b · Cited by 260
Gorgolis, G., & Galiotis, C. (2017) · 2D Materials · doi:10.1088/2053-1583/aa7883 · Cited by 259
Tang, Y., Gong, S., Chen, Y., Yap, L. W., & Cheng, W. (2014) · ACS Nano · doi:10.1021/nn502702a · Cited by 258
Self-healing and superstretchable conductors from hierarchical nanowire assemblies
Song, P., Qin, H., Gao, H.-L., Cong, H.-P., & Yu, S.-H. (2018) · Nature Communications · doi:10.1038/s41467-018-05238-w · Cited by 258
Xue, P., Liu, S., Shi, X., Sun, C., Lai, C., Zhou, Y., Sui, D., Chen, Y., & Liang, J. (2018) · Advanced Materials · doi:10.1002/adma.201804165 · Cited by 257
Yang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08454k · Cited by 255
Composite Hydrogels with Tunable Anisotropic Morphologies and Mechanical Properties
Chau, M., De France, K. J., Kopera, B., Machado, V. R., Rosenfeldt, S., Reyes, L., Chan, K. J. W., Förster, S., Cranston, E. D., Hoare, T., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00792 · Cited by 251
Freeze Casting for Assembling Bioinspired Structural Materials
Cheng, Q., Huang, C., & Tomsia, A. P. (2017) · Advanced Materials · doi:10.1002/adma.201703155 · Cited by 249
Bioinspired Materials for Controlling Ice Nucleation, Growth, and Recrystallization
He, Z., Liu, K., & Wang, J. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00528 · Cited by 247
Jiang, Y., Xie, X., Chen, Y., Liu, Y., Yang, R., & Sui, G. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc02900h · Cited by 247
An, F., Li, X., Min, P., Li, H., Dai, Z., & Yu, Z.-Z. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.011 · Cited by 236
Xiao, J., Lv, W., Song, Y., & Zheng, Q. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.156 · Cited by 234
Yao, Y., Zhu, X., Zeng, X., Sun, R., Xu, J.-B., & Wong, C.-P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00328 · Cited by 234
Li, X., Yin, X., Xu, H., Han, M., Li, M., Liang, S., Cheng, L., & Zhang, L. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13658 · Cited by 225
Yao, B., Chen, J., Huang, L., Zhou, Q., & Shi, G. (2016) · Advanced Materials · doi:10.1002/adma.201504594 · Cited by 224
Multifunctional Graphene/Platinum/Nafion Hybrids via Ice Templating
Estevez, L., Kelarakis, A., Gong, Q., Da’as, E. H., & Giannelis, E. P. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200244s · Cited by 215
Three-Dimensional Printed Graphene Foams
Sha, J., Li, Y., Villegas Salvatierra, R., Wang, T., Dong, P., Ji, Y., Lee, S.-K., Zhang, C., Zhang, J., Smith, R. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01987 · Cited by 214
Gao, H., Xu, L., Long, F., Pan, Z., Du, Y., Lu, Y., Ge, J., & Yu, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400457 · Cited by 213
High‐Performance Solid Polymer Electrolytes Filled with Vertically Aligned 2D Materials
Tang, W., Tang, S., Guan, X., Zhang, X., Xiang, Q., & Luo, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900648 · Cited by 208
Ultralight Conductive Silver Nanowire Aerogels
Qian, F., Lan, P. C., Freyman, M. C., Chen, W., Kou, T., Olson, T. Y., Zhu, C., Worsley, M. A., Duoss, E. B., Spadaccini, C. M., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02790 · Cited by 207
Nacre-mimetic composite with intrinsic self-healing and shape-programming capability
Du, G., Mao, A., Yu, J., Hou, J., Zhao, N., Han, J., Zhao, Q., Gao, W., Xie, T., & Bai, H. (2019) · Nature Communications · doi:10.1038/s41467-019-08643-x · Cited by 204
He, Z., Liu, J., Qiao, Y., Li, C. M., & Tan, T. T. Y. (2012) · Nano Letters · doi:10.1021/nl302175j · Cited by 203
Effects of nanocellulose on the structure and properties of poly(vinyl alcohol)-borax hybrid foams
Han, J., Yue, Y., Wu, Q., Huang, C., Pan, H., Zhan, X., Mei, C., & Xu, X. (2017) · Cellulose · doi:10.1007/s10570-017-1409-4 · Cited by 202
Peng, M., Wen, Z., Xie, L., Cheng, J., Jia, Z., Shi, D., Zeng, H., Zhao, B., Liang, Z., Li, T., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902930 · Cited by 199
Qiu, L., Liu, D., Wang, Y., Cheng, C., Zhou, K., Ding, J., Truong, V., & Li, D. (2014) · Advanced Materials · doi:10.1002/adma.201305359 · Cited by 198
Zeng, Z., Wang, C., Zhang, Y., Wang, P., Seyed Shahabadi, S. I., Pei, Y., Chen, M., & Lu, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19427 · Cited by 198
Robust Vacuum‐/Air‐Dried Graphene Aerogels and Fast Recoverable Shape‐Memory Hybrid Foams
Li, C., Qiu, L., Zhang, B., Li, D., & Liu, C. (2016) · Advanced Materials · doi:10.1002/adma.201504317 · Cited by 195
Li, X.-H., Liu, P., Li, X., An, F., Min, P., Liao, K.-N., & Yu, Z.-Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.09.016 · Cited by 194
Structurally Controlled Cellular Architectures for High‐Performance Ultra‐Lightweight Materials
Yeo, S. J., Oh, M. J., & Yoo, P. J. (2019) · Advanced Materials · doi:10.1002/adma.201803670 · Cited by 194
Zhao, N., Yang, M., Zhao, Q., Gao, W., Xie, T., & Bai, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b01089 · Cited by 193
Additive manufacturing of complex micro-architected graphene aerogels
Hensleigh, R. M., Cui, H., Oakdale, J. S., Ye, J. C., Campbell, P. G., Duoss, E. B., Spadaccini, C. M., Zheng, X., & Worsley, M. A. (2018) · Materials Horizons · doi:10.1039/c8mh00668g · Cited by 192
Large-range Control of the Microstructures and Properties of Three-dimensional Porous Graphene
Xie, X., Zhou, Y., Bi, H., Yin, K., Wan, S., & Sun, L. (2013) · Scientific Reports · doi:10.1038/srep02117 · Cited by 190
Munier, P., Gordeyeva, K., Bergström, L., & Fall, A. B. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00304 · Cited by 186
A hierarchically structured graphene foam and its potential as a large-scale strain-gauge sensor
Kuang, J., Liu, L., Gao, Y., Zhou, D., Chen, Z., Han, B., & Zhang, Z. (2013) · Nanoscale · doi:10.1039/c3nr03379a · Cited by 185
Nieto-Suárez, M., López-Quintela, M. A., & Lazzari, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.064 · Cited by 185
Zeng, Z., Chen, M., Pei, Y., Seyed Shahabadi, S. I., Che, B., Wang, P., & Lu, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07643 · Cited by 183
Lai, K. C., Lee, L. Y., Hiew, B. Y. Z., Thangalazhy-Gopakumar, S., & Gan, S. (2019) · Journal of Environmental Sciences · doi:10.1016/j.jes.2018.11.023 · Cited by 182
From Monomers to a Lasagna-like Aerogel Monolith: An Assembling Strategy for Aramid Nanofibers
Xie, C., He, L., Shi, Y., Guo, Z.-X., Qiu, T., & Tuo, X. (2019) · ACS Nano · doi:10.1021/acsnano.9b01955 · Cited by 180
Du, A., Wang, H., Zhou, B., Zhang, C., Wu, X., Ge, Y., Niu, T., Ji, X., Zhang, T., Zhang, Z., et al. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02926 · Cited by 175
Maleki, H., Shahbazi, M.-A., Montes, S., Hosseini, S. H., Eskandari, M. R., Zaunschirm, S., Verwanger, T., Mathur, S., Milow, B., Krammer, B., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04283 · Cited by 175
Temperature‐Invariant Superelastic and Fatigue Resistant Carbon Nanofiber Aerogels
Li, C., Ding, Y., Hu, B., Wu, Z., Gao, H., Liang, H., Chen, J., & Yu, S. (2020) · Advanced Materials · doi:10.1002/adma.201904331 · Cited by 173
Self‐Healing Graphene‐Based Composites with Sensing Capabilities
D'Elia, E., Barg, S., Ni, N., Rocha, V. G., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201501653 · Cited by 168
Yang, J., Xia, Y., Xu, P., & Chen, B. (2018) · Cellulose · doi:10.1007/s10570-018-1801-8 · Cited by 165
A mechanically strong and sensitive CNT/rGO–CNF carbon aerogel for piezoresistive sensors
Peng, X., Wu, K., Hu, Y., Zhuo, H., Chen, Z., Jing, S., Liu, Q., Liu, C., & Zhong, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta09322a · Cited by 164
Donius, A. E., Liu, A., Berglund, L. A., & Wegst, U. G. K. (2014) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.05.012 · Cited by 162
Ultralow Electrical Percolation in Graphene Aerogel/Epoxy Composites
Wang, Z., Shen, X., Han, N. M., Liu, X., Wu, Y., Ye, W., & Kim, J.-K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03206 · Cited by 161
Self-citationWaschkies, T., Oberacker, R., & Hoffmann, M. J. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.04.046 · Cited by 159
Highly Aligned Porous Silicon Carbide Ceramics by Freezing Polycarbosilane/Camphene Solution
Yoon, B., Lee, E., Kim, H., & Koh, Y. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01703.x · Cited by 159
Zeng, X., Ye, L., Yu, S., Sun, R., Xu, J., & Wong, C. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00505 · Cited by 158
Zhao, H., Yue, Y., Guo, L., Wu, J., Zhang, Y., Li, X., Mao, S., & Han, X. (2016) · Advanced Materials · doi:10.1002/adma.201600839 · Cited by 155
Zhang, X., Wang, H., Cai, Z., Yan, N., Liu, M., & Yu, Y. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03554 · Cited by 155
Wu, X., Shao, G., Cui, S., Wang, L., & Shen, X. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.09.012 · Cited by 154
Self-citationUltralow-density copper nanowire aerogel monoliths with tunable mechanical and electrical properties
Tang, Y., Yeo, K. L., Chen, Y., Yap, L. W., Xiong, W., & Cheng, W. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10969k · Cited by 153
Peng, J., Huang, C., Cao, C., Saiz, E., Du, Y., Dou, S. X., Tomsia, A. P., Wagner, H. D., Jiang, L., & Cheng, Q. (2019) · Matter · doi:10.1016/j.matt.2019.08.013 · Cited by 152
Ferraro, C., García‐Tuñón, E., Rocha, V. G., Barg, S., Fariñas, L., Álvarez-Arenas, T. E. G., Sernicola, G., Giuliani, F., & Saiz, E. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504051 · Cited by 151
Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
Wat, A., Lee, J. I., Ryu, C. W., Gludovatz, B., Kim, J., Tomsia, A. P., Ishikawa, T., Schmitz, J., Meyer, A., Alfreider, M., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08753-6 · Cited by 151
Pristine Graphene Aerogels by Room‐Temperature Freeze Gelation
Lin, Y., Liu, F., Casano, G., Bhavsar, R. S., Kinloch, I. A., & Derby, B. (2016) · Advanced Materials · doi:10.1002/adma.201602393 · Cited by 148
Pan, Z., Nishihara, H., Iwamura, S., Sekiguchi, T., Sato, A., Isogai, A., Kang, F., Kyotani, T., & Yang, Q. (2016) · ACS Nano · doi:10.1021/acsnano.6b05808 · Cited by 148
Using graphene networks to build bioinspired self-monitoring ceramics
Picot, O. T., Rocha, V. G., Ferraro, C., Ni, N., D’Elia, E., Meille, S., Chevalier, J., Saunders, T., Peijs, T., Reece, M. J., et al. (2017) · Nature Communications · doi:10.1038/ncomms14425 · Cited by 147
Wang, L., Qiu, Y., Lv, H., Si, Y., Liu, L., Zhang, Q., Cao, J., Yu, J., Li, X., & Ding, B. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901407 · Cited by 147
Magnetic freeze casting inspired by nature
Porter, M. M., Yeh, M., Strawson, J., Goehring, T., Lujan, S., Siripasopsotorn, P., Meyers, M. A., & McKittrick, J. M. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.058 · Cited by 146
Intrinsic and extrinsic control of freeze casting
Nelson, I. B., & Naleway, S. E. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2018.11.011 · Cited by 146
Cellulose nanowhisker foams by freeze casting
Dash, R., Yang, L., & Ragauskas, A. J. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.12.035 · Cited by 145
Freezing Colloids: Observations, Principles, Control, and Use
Deville, S. (2017) · Engineering materials and processes · doi:10.1007/978-3-319-50515-2 · Cited by 138
Lee, J., & Deng, Y. (2011) · Soft Matter · doi:10.1039/c1sm05388d · Cited by 137
Wu, S., Zhu, C., He, Z., Han, X. M., Fan, Q., Song, Y., Francisco, J. S., Zeng, X. C., & Wang, J. (2017) · Nature Communications · doi:10.1038/ncomms15154 · Cited by 137
Promoting Transport Kinetics in Li-Ion Battery with Aligned Porous Electrode Architectures
Zhang, X., Ju, Z., Housel, L. M., Wang, L., Zhu, Y., Singh, G., Sadique, N., Takeuchi, K. J., Takeuchi, E. S., Marschilok, A. C., et al. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03824 · Cited by 136
Gutiérrez, M. C., Hortigüela, M. J., Amarilla, J. M., Jiménez, R., Ferrer, M. L., & del Monte, F. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0714365 · Cited by 134
Porous Cu Nanowire Aerosponges from One‐Step Assembly and their Applications in Heat Dissipation
Jung, S. M., Preston, D. J., Jung, H. Y., Deng, Z., Wang, E. N., & Kong, J. (2015) · Advanced Materials · doi:10.1002/adma.201504774 · Cited by 134
Katuri, K. P., Ferrer, M. L., Gutiérrez, M. C., Jiménez, R., del Monte, F., & Leech, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01477c · Cited by 131
Aliramaji, S., Zamanian, A., & Mozafari, M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.039 · Cited by 131
Wang, Z., Han, N. M., Wu, Y., Liu, X., Shen, X., Zheng, Q., & Kim, J. (2017) · Carbon · doi:10.1016/j.carbon.2017.07.079 · Cited by 131
Self-citationAn ice‐templated, linearly aligned chitosan‐alginate scaffold for neural tissue engineering
Francis, N. L., Hunger, P. M., Donius, A. E., Riblett, B. W., Zavaliangos, A., Wegst, U. G. K., & Wheatley, M. A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34668 · Cited by 125
Sandwich, Vertical‐Channeled Thick Electrodes with High Rate and Cycle Performance
Zhao, Z., Sun, M., Chen, W., Liu, Y., Zhang, L., Dongfang, N., Ruan, Y., Zhang, J., Wang, P., Dong, L., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809196 · Cited by 123
Directionally aligned macroporous SiOC via freeze casting of preceramic polymers
Naviroj, M., Miller, S. M., Colombo, P., & Faber, K. T. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.02.013 · Cited by 119
Zhai, T., Zheng, Q., Cai, Z., Turng, L., Xia, H., & Gong, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01679 · Cited by 118
A Bubble‐Derived Strategy to Prepare Multiple Graphene‐Based Porous Materials
Zhang, R., Hu, R., Li, X., Zhen, Z., Xu, Z., Li, N., He, L., & Zhu, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705879 · Cited by 117
Wang, C., Pan, Z., Lv, W. Z., Liu, B., Wei, J., Lv, X., Luo, Y., Nishihara, H., & Yang, Q. (2019) · Small · doi:10.1002/smll.201805363 · Cited by 116
Ultralight Multifunctional Carbon‐Based Aerogels by Combining Graphene Oxide and Bacterial Cellulose
Li, C., Wu, Z., Liang, H., Chen, J., & Yu, S. (2017) · Small · doi:10.1002/smll.201700453 · Cited by 114
3D free-standing porous scaffolds made of graphene oxide as substrates for neural cell growth
Serrano, M. C., Patino, J. M. R., García‐Rama, C., Ferrer, M. L., Fierro, J. L. G., Tamayo, A., Collazos-Castro, J. E., del Monte, F., & Gutiérrez, M. C. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00652f · Cited by 113
Wang, X., & Wu, P. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b09398 · Cited by 109
Zhang, X., Liu, M., Wang, H., Yan, N., Cai, Z., & Yu, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.073 · Cited by 108
Fan, L., Li, J., Cai, Z., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b01648 · Cited by 107
Highly flexible silica/chitosan hybrid scaffolds with oriented pores for tissue regeneration
Wang, D., Romer, F., Connell, L. S., Walter, C., Saiz, E., Yue, S., Lee, P. D., McPhail, D. S., Hanna, J. V., & Jones, J. R. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00767d · Cited by 106
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Yan, P., Brown, E., Su, Q., Li, J., Wang, J., Xu, C., Zhou, C., & Lin, D. L. (2017) · Small · doi:10.1002/smll.201701756 · Cited by 105
Hu, Y.-J., Zhuo, H., Luo, Q., Wu, Y.-X., Wen, R., Chen, Z.-H., Liu, L., Zhong, L.-X., Peng, X., & Sun, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta01448a · Cited by 100
Exploration of Ultralight Nanofiber Aerogels as Particle Filters: Capacity and Efficiency
Deuber, F., Mousavi, S., Federer, L., Hofer, M., & Adlhart, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00455 · Cited by 99
Porous and strong bioactive glass (13–93) scaffolds fabricated by freeze extrusion technique
Huang, T., Rahaman, M. N., Doiphode, N. D., Leu, M.-C., Bal, B. S., Day, D. E., & Liu, X. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.06.004 · Cited by 97
Long, S., Feng, Y., He, F., He, S., Hong, H., Yang, X., Zheng, L., Liu, J., Gan, L., & Long, M. (2019) · Carbon · doi:10.1016/j.carbon.2019.11.065 · Cited by 95
Highly adsorptive graphene aerogel microspheres with center-diverging microchannel structures
Liao, S., Zhai, T., & Xia, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09540a · Cited by 93
Zeng, Z., Shahabadi, S. I. S., Che, B., Zhang, Y., Zhao, C., & Lu, X. (2017) · Nanoscale · doi:10.1039/c7nr05106a · Cited by 93
Dynamic freeze casting for the production of porous titanium (Ti) scaffolds
Jung, H., Yook, S.-W., Jang, T., Li, Y., Kim, H., & Koh, Y. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.08.004 · Cited by 92
Qi, Z., Ye, J., Chen, W., Biener, J., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Zhu, C. Y. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800053 · Cited by 92
Song, X., Tetik, H., Jirakittsonthon, T., Parandoush, P., Yang, G., Lee, D.-H., Ryu, S., Lei, S., Weiss, M. L., & Lin, D. L. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800678 · Cited by 91
Zhang, Q., Zhang, F., Xu, X. Q., Zhou, C., & Lin, D. L. (2018) · ACS Nano · doi:10.1021/acsnano.7b06095 · Cited by 90
Lee, Y.-H., Lee, J.-B., Maeng, W., Koh, Y., & Kim, H. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.05.069 · Cited by 86
Freeze-form extrusion fabrication of ceramic parts
Huang, T., Mason, M. S., Hilmas, G. E., et al. (2006) · Virtual and Physical Prototyping · doi:10.1080/17452750600649609 · Cited by 85
Anisotropic silk fibroin/gelatin scaffolds from unidirectional freezing
Asuncion, M. C. T., Goh, J. C., & Toh, S. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.087 · Cited by 85
Sahoo, P. K., Kumar, N., Thiyagarajan, S., Thakur, D., & Panda, H. S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00158 · Cited by 85
Zeng, Z., Ma, X. Y. D., Zhang, Y., Wang, Z., Ng, B. F., Wan, M. P., & Lu, X. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06567 · Cited by 85
Freeze–Thaw Gelation of Cellulose Nanocrystals
Lewis, L., Hatzikiriakos, S. G., Hamad, W. Y., & MacLachlan, M. J. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00140 · Cited by 84
Kong, Y., Shen, X., Cui, S., & Fan, M. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.01.025 · Cited by 83
Self-citationBiocompatible MWCNT scaffolds for immobilization and proliferation of E. coli
Gutiérrez, M. C., García-Carvajal, Z. Y., Hortigüela, M. J., Yuste, L., Rojo, F., Ferrer, M. L., & del Monte, F. (2007) · Journal of Materials Chemistry · doi:10.1039/b707504a · Cited by 83
Wu, X., Shao, G., Shen, X., Cui, S., & Chen, X. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.08.052 · Cited by 83
Self-citationEco-fabrication of hierarchical porous silica monoliths by ice-templating of rice husk ash
Bahrami, A., Simon, U., Soltani, N., Zavareh, S., Schmidt, J., Pech-Canul, M. I., & Gurlo, A. (2016) · Green Chemistry · doi:10.1039/c6gc02153k · Cited by 81
Self-citationAmphiphilic Nanofiber‐Based Aerogels for Selective Liquid Absorption from Electrospun Biopolymers
Deuber, F., Mousavi, S., Federer, L., & Adlhart, C. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700065 · Cited by 80
Nanoreinforced xylan–cellulose composite foams by freeze-casting
Köhnke, T., Lin, A., Elder, T., Theliander, H., & Ragauskas, A. J. (2012) · Green Chemistry · doi:10.1039/c2gc35413f · Cited by 78
Ouyang, A., Gong, Q., & Liang, J. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400250 · Cited by 78
Polymer-Coated Graphene Aerogel Beads and Supercapacitor Application
Ouyang, A., Cao, A., Hu, S., Li, D., Xu, R., Wei, J., Zhu, H., & Wu, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01965 · Cited by 78
Barrow, M., Eltmimi, A., Ahmed, A., Myers, P., & Zhang, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31425h · Cited by 77
Chen, Y., Fan, D., Lyu, S., Li, G., Jiang, F., & Wang, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05085 · Cited by 77
Multiscale Nanoparticle Assembly: From Particulate Precise Manufacturing to Colloidal Processing
Niederberger, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703647 · Cited by 76
Peng, Q.-Y., Qin, Y.-Y., Zhao, X., Sun, X.-X., Chen, Q., Xu, F., Lin, Z.-S., Yuan, Y., Li, Y., Li, J., et al. (2017) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.7b14604 · Cited by 76
Understanding Mechanical Response of Elastomeric Graphene Networks
Ni, N., Barg, S., García‐Tuñón, E., Perez, F. M., Miranda, M., Lu, C., Mattevi, C., & Saiz, E. (2015) · Scientific Reports · doi:10.1038/srep13712 · Cited by 75
Kim, J., Han, N. M., Kim, J., Lee, J., Kim, J., & Jeon, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13415 · Cited by 74
Effect of flake size on the mechanical properties of graphene aerogels prepared by freeze casting
Gao, W., Zhao, N., Yao, W., Xu, Z. Y., Bai, H., & Gao, C. (2017) · RSC Advances · doi:10.1039/c7ra05557a · Cited by 73
Electrochemical Characterization of High Energy Density Graphite Electrodes Made by Freeze-Casting
Amin, R., Delattre, B., Tomsia, A. P., & Chiang, Y. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00962 · Cited by 73
Topotactic Fibrillogenesis of Freeze-Cast Microridged Collagen Scaffolds for 3D Cell Culture
Rieu, C., Parisi, C., Mosser, G., Haye, B., Coradin, T., Fernandes, F. M., & Trichet, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03219 · Cited by 72
Ice-Templated and Cross-Linked Amyloid Fibril Aerogel Scaffolds for Cell Growth
Nyström, G., Fong, W., & Mezzenga, R. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00792 · Cited by 70
Kang, S., Kang, T., Kim, B. S., Oh, J., Park, S., Choi, I. S., Lee, J., & Son, J. G. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.004 · Cited by 70
Drilling by light: ice-templated photo-patterning enabled by a dynamically crosslinked hydrogel
Chen, D., Zhang, Y., Ni, C., Ma, C., Yin, J., Bai, H., Luo, Y., Huang, F., Xie, T., & Zhao, Q. (2019) · Materials Horizons · doi:10.1039/c9mh00090a · Cited by 69
Ogden, T. A., Prisbrey, M., Nelson, I. B., Raeymaekers, B., & Naleway, S. E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.107561 · Cited by 68
Zhang, H., Nunes, P. D., Wilhelm, M., & Rezwan, K. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.09.018 · Cited by 66
Suspension- and solution-based freeze casting for porous ceramics
Naviroj, M., Voorhees, P. W., & Faber, K. T. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.133 · Cited by 66
Cited by
Xia, Y., Gao, W., & Gao, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204591 · Cited by 734
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Xu, J., Li, T., Yan, T., Wu, S., Wu, M., Chao, J., Huo, X., Wang, P., & Wang, R. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01723c · Cited by 419
Huang, X., Wei, J., Zhang, Y., Qian, B., Jia, Q., Liu, J., Zhao, X., & Shao, G. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00851-3 · Cited by 362
Self-citationA review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Metadata
- Authors
- Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-03-12
- Volume
- 32
- Issue
- 17
- Pages
- e1907176-e1907176
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3011724868
- Cited by
- 871
- References
- 266
- FWCI
- 47.06
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.