The DOI matches its Crossref record; 267 of the 267 references it cites were found in a registry or an index.
Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications
Abstract
Printed electronics is attracting a great deal of attention in both research and commercialization as it enables fabrication of large‐scale, low‐cost electronic devices on a variety of substrates. Printed electronics plays a critical role in facilitating widespread flexible electronics and more recently stretchable electronics. Conductive nanomaterials, such as metal nanoparticles and nanowires, carbon nanotubes, and graphene, are promising building blocks for printed electronics. Nanomaterial‐based printing technologies, formulation of printable inks, post‐printing treatment, and integration of functional devices have progressed substantially in the recent years. This review summarizes basic principles and recent development of common printing technologies, formulations of printable inks based on conductive nanomaterials, deposition of conductive inks via different printing techniques, and performance enhancement by using various sintering methods. While this review places emphasis on conductive nanomaterials, the printing techniques and ink formulations can be applied to other materials such as semiconducting and insulating nanomaterials. Moreover, some applications of printed flexible and stretchable electronic devices are reviewed to illustrate their potential. Finally, the future challenges and prospects for printing conductive nanomaterials are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-yield production of graphene by liquid-phase exfoliation of graphite
Hernandez, Y., Nicolosi, V., Lotya, M., Blighe, F. M., Sun, Z., De, S., McGovern, I. T., Holland, B., Byrne, M., Gun'Ko, Y. K., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.215 · Cited by 6,285
Carbon Nanotubes: Present and Future Commercial Applications
De Volder, M. F. L., Tawfick, S. H., Baughman, R. H., & Hart, A. J. (2013) · Science · doi:10.1126/science.1222453 · Cited by 5,587
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
A review of wearable sensors and systems with application in rehabilitation
Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-9-21 · Cited by 2,396
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Contact line deposits in an evaporating drop
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (2000) · Physical Review E · doi:10.1103/physreve.62.756 · Cited by 2,300
Hecht, D. S., Hu, L., & Irvin, G. (2011) · Advanced Materials · doi:10.1002/adma.201003188 · Cited by 2,229
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Past achievements and future challenges in the development of optically transparent electrodes
Ellmer, K. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.282 · Cited by 2,090
Scalable Coating and Properties of Transparent, Flexible, Silver Nanowire Electrodes
Hu, L., Kim, H. S., Lee, J.-Y., Peumans, P., & Cui, Y. (2010) · ACS Nano · doi:10.1021/nn1005232 · Cited by 2,075
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
Zeng, W., Shu, L., Li, Q., Chen, S., Wang, F., & Tao, X. (2014) · Advanced Materials · doi:10.1002/adma.201400633 · Cited by 2,019
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
The rise of plastic bioelectronics
Someya, T., Bao, Z., & Malliaras, G. G. (2016) · Nature · doi:10.1038/nature21004 · Cited by 1,884
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Inkjet printing of single-crystal films
Minemawari, H., Yamada, T., Matsui, H., Tsutsumi, J., Haas, S., Chiba, R., Kumai, R., & Hasegawa, T. (2011) · Nature · doi:10.1038/nature10313 · Cited by 1,707
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Highly Conductive and Stretchable Silver Nanowire Conductors
Xu, F., & Zhu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201886 · Cited by 1,314
Self-citationTechnologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic
Cho, J. H., Lee, J., Xia, Y., Kim, B., He, Y., Renn, M. J., Lodge, T. P., & Daniel Frisbie, C. (2008) · Nature Materials · doi:10.1038/nmat2291 · Cited by 1,178
Self-limited plasmonic welding of silver nanowire junctions
Garnett, E. C., Cai, W., Cha, J. J., Mahmood, F., Connor, S. T., Greyson Christoforo, M., Cui, Y., McGehee, M. D., & Brongersma, M. L. (2012) · Nature Materials · doi:10.1038/nmat3238 · Cited by 1,147
Recent Advances in Flexible and Stretchable Bio‐Electronic Devices Integrated with Nanomaterials
Choi, S., Lee, H., Ghaffari, R., Hyeon, T., & Kim, D. (2016) · Advanced Materials · doi:10.1002/adma.201504150 · Cited by 1,104
Lee, P., Lee, J., Lee, H., Yeo, J., Hong, S., Nam, K. H., Lee, D., Lee, S. S., & Ko, S. H. (2012) · Advanced Materials · doi:10.1002/adma.201200359 · Cited by 1,064
Wearable multifunctional sensors using printed stretchable conductors made of silver nanowires
Yao, S., & Zhu, Y. (2014) · Nanoscale · doi:10.1039/c3nr05496a · Cited by 1,028
Self-citationInkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 994
Xu, S., Yan, Z., Jang, K.-I., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M., McCracken, J., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 931
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Printable elastic conductors with a high conductivity for electronic textile applications
Matsuhisa, N., Kaltenbrunner, M., Yokota, T., Jinno, H., Kuribara, K., Sekitani, T., & Someya, T. (2015) · Nature Communications · doi:10.1038/ncomms8461 · Cited by 869
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Nature-Inspired Structural Materials for Flexible Electronic Devices
Liu, Y., He, K., Chen, G., Leow, W. R., & Chen, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00291 · Cited by 798
Metal Nanowire Networks: The Next Generation of Transparent Conductors
Ye, S., Rathmell, A. R., Chen, Z., Stewart, I. E., & Wiley, B. J. (2014) · Advanced Materials · doi:10.1002/adma.201402710 · Cited by 796
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
Krebs, F. C., Espinosa, N., Hösel, M., Søndergaard, R. R., & Jørgensen, M. (2014) · Advanced Materials · doi:10.1002/adma.201302031 · Cited by 793
Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications
Hong, S., Lee, H., Lee, J., Kwon, J., Han, S., Suh, Y. D., Cho, H., Shin, J., Yeo, J., & Ko, S. H. (2015) · Advanced Materials · doi:10.1002/adma.201500917 · Cited by 788
Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes
Matsuhisa, N., Inoue, D., Zalar, P., Jin, H., Matsuba, Y., Itoh, A., Yokota, T., Hashizume, D., & Someya, T. (2017) · Nature Materials · doi:10.1038/nmat4904 · Cited by 750
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Lee, J., Lee, P., Lee, H., Lee, D., Lee, S. S., & Ko, S. H. (2012) · Nanoscale · doi:10.1039/c2nr31254a · Cited by 741
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Printable Transparent Conductive Films for Flexible Electronics
Li, D., Lai, W., Zhang, Y., & Huang, W. (2018) · Advanced Materials · doi:10.1002/adma.201704738 · Cited by 714
Flexible transparent conductive materials based on silver nanowire networks: a review
Langley, D., Giusti, G., Mayousse, C., Celle, C., Bellet, D., & Simonato, J.-P. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/45/452001 · Cited by 709
Rathmell, A. R., Bergin, S. M., Hua, Y., Li, Z., & Wiley, B. J. (2010) · Advanced Materials · doi:10.1002/adma.201000775 · Cited by 700
Nanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices
Yao, S., & Zhu, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404446 · Cited by 695
Self-citationInkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Liang, J., Li, L., Tong, K., Ren, Z., Hu, W., Niu, X., Chen, Y., & Pei, Q. (2014) · ACS Nano · doi:10.1021/nn405887k · Cited by 673
Preparation of 2D material dispersions and their applications
Cai, X., Luo, Y., Liu, B., & Cheng, H.-M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00254a · Cited by 665
Organic materials for printed electronics
Berggren, M., Nilsson, D., & Robinson, N. D. (2007) · Nature Materials · doi:10.1038/nmat1817 · Cited by 663
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Krebs, F. C. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.03.009 · Cited by 608
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Fabrication of silver nanowire transparent electrodes at room temperature
Tokuno, T., Nogi, M., Karakawa, M., Jiu, J., Nge, T. T., Aso, Y., & Suganuma, K. (2011) · Nano Research · doi:10.1007/s12274-011-0172-3 · Cited by 577
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
McManus, D., Vranic, S., Withers, F., Sanchez-Romaguera, V., Macucci, M., Yang, H., Sorrentino, R., Parvez, K., Son, S.-K., Iannaccone, G., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.281 · Cited by 577
Nanomaterial-Enabled Wearable Sensors for Healthcare
Yao, S., Swetha, P., & Zhu, Y. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700889 · Cited by 576
Self-citationRapid synthesis of silver nanowires through a CuCl- or CuCl2-mediated polyol process
Korte, K. E., Skrabalak, S. E., & Xia, Y. (2008) · J. Mater. Chem. · doi:10.1039/b714072j · Cited by 549
High-Performance Plastic Transistors Fabricated by Printing Techniques
Bao, Z., Feng, Y., Dodabalapur, A., Raju, V. R., & Lovinger, A. J. (1997) · Chemistry of Materials · doi:10.1021/cm9701163 · Cited by 537
Liang, J., Tong, K., & Pei, Q. (2016) · Advanced Materials · doi:10.1002/adma.201600772 · Cited by 535
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Li, Y., Wu, Y., & Ong, B. S. (2005) · Journal of the American Chemical Society · doi:10.1021/ja043425k · Cited by 512
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
All-printed thin-film transistors from networks of liquid-exfoliated nanosheets
Kelly, A. G., Hallam, T., Backes, C., Harvey, A., Esmaeily, A. S., Godwin, I., Coelho, J., Nicolosi, V., Lauth, J., Kulkarni, A., et al. (2017) · Science · doi:10.1126/science.aal4062 · Cited by 501
Synthesis of highly stable dispersions of nanosized copper particles using l-ascorbic acid
Xiong, J., Wang, Y., Xue, Q., & Wu, X. (2011) · Green Chemistry · doi:10.1039/c0gc00772b · Cited by 499
Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components
Trung, T. Q., & Lee, N. (2017) · Advanced Materials · doi:10.1002/adma.201603167 · Cited by 497
Uniformly Interconnected Silver‐Nanowire Networks for Transparent Film Heaters
Kim, T., Kim, Y. W., Lee, H. S., Kim, H., Yang, W. S., & Suh, K. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202013 · Cited by 495
Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells
Fang, Z., Zhu, H., Yuan, Y., Ha, D., Zhu, S., Preston, C., Chen, Q., Li, Y., Han, X., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl404101p · Cited by 489
Cao, R., Pu, X., Du, X., Yang, W., Wang, J., Guo, H., Zhao, S., Yuan, Z., Zhang, C., Li, C., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b02477 · Cited by 486
Large-Scale Synthesis of High-Quality Ultralong Copper Nanowires
Chang, Y., Lye, M. L., & Zeng, H. C. (2005) · Langmuir · doi:10.1021/la050220w · Cited by 479
Low-Cost Inorganic Solar Cells: From Ink To Printed Device
Habas, S. E., Platt, H. A. S., van Hest, M. F. A. M., & Ginley, D. S. (2010) · Chemical Reviews · doi:10.1021/cr100191d · Cited by 459
All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
Jung, M., Kim, J., Noh, J., Lim, N., Lim, C., Lee, G., Kim, J., Kang, H., Jung, K., Leonard, A. D., et al. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2039541 · Cited by 452
All-inkjet-printed, solid-state flexible supercapacitors on paper
Choi, K.-H., Yoo, J., Lee, C. K., & Lee, S.-Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00966b · Cited by 449
Mechanically Sintered Gallium–Indium Nanoparticles
Boley, J. W., White, E. L., & Kramer, R. K. (2015) · Advanced Materials · doi:10.1002/adma.201404790 · Cited by 439
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Magdassi, S., Grouchko, M., & Kamyshny, A. (2010) · Materials · doi:10.3390/ma3094626 · Cited by 429
Graphene-based counter electrode for dye-sensitized solar cells
Zhang, D. W., Li, X. D., Li, H. B., Chen, S., Sun, Z., Yin, X. J., & Huang, S. M. (2011) · Carbon · doi:10.1016/j.carbon.2011.08.005 · Cited by 427
Hong, S., Yeo, J., Kim, G., Kim, D., Lee, H., Kwon, J., Lee, H., Lee, P., & Ko, S. H. (2013) · ACS Nano · doi:10.1021/nn400432z · Cited by 427
Printed Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
Roll-to-Roll Gravure Printed Electrochemical Sensors for Wearable and Medical Devices
Bariya, M., Shahpar, Z., Park, H., Sun, J., Jung, Y., Gao, W., Nyein, H. Y. Y., Liaw, T. S., Tai, L.-C., Ngo, Q. P., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b02505 · Cited by 417
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Lau, P. H., Takei, K., Wang, C., Ju, Y., Kim, J., Yu, Z., Takahashi, T., Cho, G., & Javey, A. (2013) · Nano Letters · doi:10.1021/nl401934a · Cited by 410
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
Synthesis of Ultralong Copper Nanowires for High-Performance Transparent Electrodes
Zhang, D., Wang, R., Wen, M., Weng, D., Cui, X., Sun, J., Li, H., & Lu, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3050184 · Cited by 404
Mutiso, R. M., Sherrott, M. C., Rathmell, A. R., Wiley, B. J., & Winey, K. I. (2013) · ACS Nano · doi:10.1021/nn403324t · Cited by 400
Additive Manufacturing of Metal Structures at the Micrometer Scale
Hirt, L., Reiser, A., Spolenak, R., & Zambelli, T. (2017) · Advanced Materials · doi:10.1002/adma.201604211 · Cited by 400
Nanoscale Joule Heating and Electromigration Enhanced Ripening of Silver Nanowire Contacts
Song, T.-B., Chen, Y., Chung, C.-H., Yang, Y. (., Bob, B., Duan, H.-S., Li, G., Tu, K.-N., Huang, Y., & Yang, Y. (2014) · ACS Nano · doi:10.1021/nn4065567 · Cited by 399
Printed, Sub-3V Digital Circuits on Plastic from Aqueous Carbon Nanotube Inks
Ha, M., Xia, Y., Green, A. A., Zhang, W., Renn, M. J., Kim, C. H., Hersam, M. C., & Frisbie, C. D. (2010) · ACS Nano · doi:10.1021/nn100966s · Cited by 391
Synthesis and Purification of Silver Nanowires To Make Conducting Films with a Transmittance of 99%
Li, B., Ye, S., Stewart, I. E., Alvarez, S., & Wiley, B. J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02582 · Cited by 384
One-Dimensional Nanostructures of Metals: Large-Scale Synthesis and Some Potential Applications
Chen, J., Wiley, B. J., & Xia, Y. (2007) · Langmuir · doi:10.1021/la063193y · Cited by 365
One‐Dimensional Nanomaterials for Soft Electronics
Gong, S., & Cheng, W. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600314 · Cited by 361
Gravure Printing of Graphene for Large‐area Flexible Electronics
Secor, E. B., Lim, S., Zhang, H., Frisbie, C. D., Francis, L. F., & Hersam, M. C. (2014) · Advanced Materials · doi:10.1002/adma.201401052 · Cited by 358
Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks
Karagiannidis, P. G., Hodge, S. A., Lombardi, L., Tomarchio, F., Decorde, N., Milana, S., Goykhman, I., Su, Y., Mesite, S. V., Johnstone, D. N., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b07735 · Cited by 348
Silver Nanowires: From Scalable Synthesis to Recyclable Foldable Electronics
Yang, C., Gu, H., Lin, W., Yuen, M. M., Wong, C. P., Xiong, M., & Gao, B. (2011) · Advanced Materials · doi:10.1002/adma.201100530 · Cited by 346
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Conductive Inks with a “Built-In” Mechanism That Enables Sintering at Room Temperature
Grouchko, M., Kamyshny, A., Mihailescu, C. F., Anghel, D. F., & Magdassi, S. (2011) · ACS Nano · doi:10.1021/nn2005848 · Cited by 331
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Inkjet printing for flexible electronics: Materials, processes and equipments
Yin, Z., Huang, Y., Bu, N., Wang, X., & Xiong, Y. (2010) · Chinese Science Bulletin · doi:10.1007/s11434-010-3251-y · Cited by 321
Fukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Tavakoli, M., Malakooti, M. H., Paisana, H., Ohm, Y., Green Marques, D., Alhais Lopes, P., Piedade, A. P., de Almeida, A. T., & Majidi, C. (2018) · Advanced Materials · doi:10.1002/adma.201801852 · Cited by 310
An, B. W., Kim, K., Lee, H., Kim, S., Shim, Y., Lee, D., Song, J. Y., & Park, J. (2015) · Advanced Materials · doi:10.1002/adma.201502092 · Cited by 306
Xu, B., Akhtar, A., Liu, Y., Chen, H., Yeo, W., Park, S. I., Boyce, B., Kim, H., Yu, J., Lai, H., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504155 · Cited by 304
Stretchable electronics based on Ag-PDMS composites
Larmagnac, A., Eggenberger, S., Janossy, H., & Vörös, J. (2014) · Scientific Reports · doi:10.1038/srep07254 · Cited by 296
Facile synthesis of very-long silver nanowires for transparent electrodes
Jiu, J., Araki, T., Wang, J., Nogi, M., Sugahara, T., Nagao, S., Koga, H., Suganuma, K., Nakazawa, E., Hara, M., et al. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00502c · Cited by 294
Recent Advances in Stretchable and Transparent Electronic Materials
McCoul, D., Hu, W., Gao, M., Mehta, V., & Pei, Q. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201500407 · Cited by 293
Stretchable and Reversibly Deformable Radio Frequency Antennas Based on Silver Nanowires
Song, L., Myers, A. C., Adams, J. J., & Zhu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405972e · Cited by 292
Self-citationHighly Stretchable and Self‐Deformable Alternating Current Electroluminescent Devices
Wang, J., Yan, C., Chee, K. J., & Lee, P. S. (2015) · Advanced Materials · doi:10.1002/adma.201405486 · Cited by 289
Hu, M., Gao, J., Dong, Y., Li, K., Shan, G., Yang, S., & Li, R. K.-Y. (2012) · Langmuir · doi:10.1021/la300720y · Cited by 289
Shen, W., Zhang, X., Huang, Q., Xu, Q., & Song, W. (2014) · Nanoscale · doi:10.1039/c3nr05479a · Cited by 288
Self-citationFacile Synthesis of Sub-20 nm Silver Nanowires through a Bromide-Mediated Polyol Method
da Silva, R. R., Yang, M., Choi, S., Chi, M., Luo, M., Zhang, C., Li, Z., Camargo, P. H. C., Ribeiro, S. J. L., & Younan Xia, A. (2016) · ACS Nano · doi:10.1021/acsnano.6b03806 · Cited by 286
Capillary-Force-Induced Cold Welding in Silver-Nanowire-Based Flexible Transparent Electrodes
Liu, Y., Zhang, J., Gao, H., Wang, Y., Liu, Q., Huang, S., Guo, C. F., & Ren, Z. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04613 · Cited by 284
Large-scale organic nanowire lithography and electronics
Min, S.-Y., Kim, T.-S., Kim, B. J., Cho, H., Noh, Y.-Y., Yang, H., Cho, J. H., & Lee, T.-W. (2013) · Nature Communications · doi:10.1038/ncomms2785 · Cited by 282
Transparent Conductive Coatings by Printing Coffee Ring Arrays Obtained at Room Temperature
Layani, M., Gruchko, M., Milo, O., Balberg, I., Azulay, D., & Magdassi, S. (2009) · ACS Nano · doi:10.1021/nn901239z · Cited by 282
All inkjet-printed graphene-based conductive patterns for wearable e-textile applications
Karim, N., Afroj, S., Malandraki, A., Butterworth, S., Beach, C., Rigout, M., Novoselov, K. S., Casson, A. J., & Yeates, S. G. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03669h · Cited by 282
Song, J., Li, J., Xu, J., & Zeng, H. (2014) · Nano Letters · doi:10.1021/nl502647k · Cited by 279
Inkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics
Cui, Z., Han, Y., Huang, Q., Dong, J., & Zhu, Y. (2018) · Nanoscale · doi:10.1039/c7nr09570h · Cited by 277
Self-citationHigh efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen, T. M., Galagan, Y., Biezemans, A. F. K. V., Slaats, T. M. W. L., Voorthuijzen, W. P., Kommeren, S., Shanmugam, S., Teunissen, J. P., Hadipour, A., Verhees, W. J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00540j · Cited by 275
Health impact and safety of engineered nanomaterials
Teow, Y., Asharani, P. V., Hande, M. P., & Valiyaveettil, S. (2011) · Chemical Communications · doi:10.1039/c0cc05271j · Cited by 269
3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells
Vak, D., Hwang, K., Faulks, A., Jung, Y., Clark, N., Kim, D., Wilson, G. J., & Watkins, S. E. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401539 · Cited by 265
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Park, J. H., Hwang, G., Kim, S., Seo, J., Park, H., Yu, K., Kim, T., & Lee, K. J. (2017) · Advanced Materials · doi:10.1002/adma.201603473 · Cited by 256
Lagrange, M., Langley, D. P., Giusti, G., Jiménez, C., Bréchet, Y., & Bellet, D. (2015) · Nanoscale · doi:10.1039/c5nr04084a · Cited by 252
Screen‐Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks
Xu, Y., Schwab, M. G., Strudwick, A. J., Hennig, I., Feng, X., Wu, Z., & Müllen, K. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300184 · Cited by 250
Recent Advances in Controlling the Depositing Morphologies of Inkjet Droplets
Sun, J., Bao, B., He, M., Zhou, H., & Song, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07006 · Cited by 249
Di Giacomo, F., Shanmugam, S., Fledderus, H., Bruijnaers, B. J., Verhees, W. J. H., Dorenkamper, M. S., Veenstra, S. C., Qiu, W., Gehlhaar, R., Merckx, T., et al. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.11.010 · Cited by 249
Introduction to Printed Electronics
Suganuma, K. (2014) · SpringerBriefs in Electrical and Computer Engineering · doi:10.1007/978-1-4614-9625-0 · Cited by 247
Wavy Ribbons of Carbon Nanotubes for Stretchable Conductors
Xu, F., Wang, X., Zhu, Y., & Zhu, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102032 · Cited by 246
Self-citationEfficient Welding of Silver Nanowire Networks without Post‐Processing
Lee, J., Lee, I., Kim, T., & Lee, J. (2013) · Small · doi:10.1002/smll.201203142 · Cited by 234
Moon, I. K., Kim, J. I., Lee, H., Hur, K., Kim, W. C., & Lee, H. (2013) · Scientific Reports · doi:10.1038/srep01112 · Cited by 233
Wearable silver nanowire dry electrodes for electrophysiological sensing
Myers, A. C., Huang, H., & Zhu, Y. (2015) · RSC Advances · doi:10.1039/c4ra15101a · Cited by 231
Self-citationCao, X., Lau, C., Liu, Y., Wu, F., Gui, H., Liu, Q., Ma, Y., Wan, H., Amer, M. R., & Zhou, C. (2016) · ACS Nano · doi:10.1021/acsnano.6b05368 · Cited by 228
Transparent flexible heater based on hybrid of carbon nanotubes and silver nanowires
Kim, D., Zhu, L., Jeong, D.-J., Chun, K., Bang, Y.-Y., Kim, S.-R., Kim, J.-H., & Oh, S.-K. (2013) · Carbon · doi:10.1016/j.carbon.2013.07.030 · Cited by 224
Ha, M., Seo, J.-W. T., Prabhumirashi, P. L., Zhang, W., Geier, M. L., Renn, M. J., Kim, C. H., Hersam, M. C., & Frisbie, C. D. (2013) · Nano Letters · doi:10.1021/nl3038773 · Cited by 222
Ink-jet printing of graphene for flexible electronics: An environmentally-friendly approach
Capasso, A., Del Rio Castillo, A. E., Sun, H., Ansaldo, A., Pellegrini, V., & Bonaccorso, F. (2015) · Solid State Communications · doi:10.1016/j.ssc.2015.08.011 · Cited by 221
Jiu, J., Nogi, M., Sugahara, T., Tokuno, T., Araki, T., Komoda, N., Suganuma, K., Uchida, H., & Shinozaki, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35545k · Cited by 220
Lee, J. H., Lee, P., Lee, D., Lee, S. S., & Ko, S. H. (2012) · Crystal Growth & Design · doi:10.1021/cg301119d · Cited by 219
A Wearable Hydration Sensor with Conformal Nanowire Electrodes
Yao, S., Myers, A., Malhotra, A., Lin, F., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601159 · Cited by 213
Self-citationFabrication of Transparent Multilayer Circuits by Inkjet Printing
Jiang, J., Bao, B., Li, M., Sun, J., Zhang, C., Li, Y., Li, F., Yao, X., & Song, Y. (2016) · Advanced Materials · doi:10.1002/adma.201503682 · Cited by 211
Jiang, Z. H., Cui, Z., Yue, T., Zhu, Y., & Werner, D. H. (2017) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2017.2671841 · Cited by 210
Self-citationSaleh, M. S., Hu, C., & Panat, R. (2017) · Science Advances · doi:10.1126/sciadv.1601986 · Cited by 203
Foldable nanopaper antennas for origami electronics
Nogi, M., Komoda, N., Otsuka, K., & Suganuma, K. (2013) · Nanoscale · doi:10.1039/c3nr00231d · Cited by 202
Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices
Garlapati, S. K., Divya, M., Breitung, B., Kruk, R., Hahn, H., & Dasgupta, S. (2018) · Advanced Materials · doi:10.1002/adma.201707600 · Cited by 202
Screen-Printing Fabrication and Characterization of Stretchable Electronics
Suikkola, J., Björninen, T., Mosallaei, M., Kankkunen, T., Iso-Ketola, P., Ukkonen, L., Vanhala, J., & Mäntysalo, M. (2016) · Scientific Reports · doi:10.1038/srep25784 · Cited by 201
Ge, Y., Duan, X., Zhang, M., Mei, L., Hu, J., Hu, W., & Duan, X. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07851 · Cited by 201
Kwon, J., Cho, H., Eom, H., Lee, H., Suh, Y. D., Moon, H., Shin, J., Hong, S., & Ko, S. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12714 · Cited by 199
Materials for stretchable electronics in bioinspired and biointegrated devices
Kim, D.-H., Lu, N., Huang, Y., & Rogers, J. A. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.36 · Cited by 198
Invisible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing
Jang, Y., Kim, J., & Byun, D. (2013) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/46/15/155103 · Cited by 197
Chen, D., Liang, J., Liu, C., Saldanha, G., Zhao, F., Tong, K., Liu, J., & Pei, Q. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503236 · Cited by 194
Cheng, T., Zhang, Y.-Z., Yi, J.-P., Yang, L., Zhang, J.-D., Lai, W.-Y., & Huang, W. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05319j · Cited by 186
Mechanically Adaptive Organic Transistors for Implantable Electronics
Reeder, J., Kaltenbrunner, M., Ware, T., Arreaga‐Salas, D., Avendano‐Bolivar, A., Yokota, T., Inoue, Y., Sekino, M., Voit, W., Sekitani, T., et al. (2014) · Advanced Materials · doi:10.1002/adma.201400420 · Cited by 185
Conductive Screen Printing Inks by Gelation of Graphene Dispersions
Arapov, K., Rubingh, E., Abbel, R., Laven, J., de With, G., & Friedrich, H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504030 · Cited by 183
Inkjet Printed Large‐Area Flexible Few‐Layer Graphene Thermoelectrics
Juntunen, T., Jussila, H., Ruoho, M., Liu, S., Hu, G., Albrow‐Owen, T., Ng, L. W. T., Howe, R. C. T., Hasan, T., Sun, Z., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800480 · Cited by 182
Flexible Interconnects for Electronic Textiles
Agcayazi, T., Chatterjee, K., Bozkurt, A., & Ghosh, T. K. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700277 · Cited by 180
Rong, Y., Ming, Y., Ji, W., Li, D., Mei, A., Hu, Y., & Han, H. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00912 · Cited by 180
Cao, C., Andrews, J. B., & Franklin, A. D. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700057 · Cited by 179
Secor, E. B., Gao, T. Z., Islam, A. E., Rao, R., Wallace, S. G., Zhu, J., Putz, K. W., Maruyama, B., & Hersam, M. C. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00029 · Cited by 178
Soft electrothermal actuators using silver nanowire heaters
Yao, S., Cui, J., Cui, Z., & Zhu, Y. (2017) · Nanoscale · doi:10.1039/c6nr09270e · Cited by 174
Self-citationAbdelkader, A. M., Karim, N., Vallés, C., Afroj, S., Novoselov, K. S., & Yeates, S. G. (2017) · 2D Materials · doi:10.1088/2053-1583/aa7d71 · Cited by 174
Roll‐to‐Roll Fabrication of Solution Processed Electronics
Abbel, R., Galagan, Y., & Groen, P. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201701190 · Cited by 173
Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
Zhang, B., He, J., Li, X., Xu, F., & Li, D. (2016) · Nanoscale · doi:10.1039/c6nr04106j · Cited by 172
He, W., & Ye, C. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.11.020 · Cited by 171
Ding, S., Jiu, J., Gao, Y., Tian, Y., Araki, T., Sugahara, T., Nagao, S., Nogi, M., Koga, H., Suganuma, K., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10802 · Cited by 171
Inkjet-printed optoelectronics
Zhan, Z., An, J., Wei, Y., Tran, V. T., & Du, H. (2017) · Nanoscale · doi:10.1039/c6nr08220c · Cited by 167
Nanomaterial-Enabled Dry Electrodes for Electrophysiological Sensing: A Review
Yao, S., & Zhu, Y. (2016) · JOM · doi:10.1007/s11837-016-1818-0 · Cited by 166
Self-citationPaper: A promising material for human-friendly functional wearable electronics
Liu, H., Qing, H., Li, Z., Han, Y. L., Lin, M., Yang, H., Li, A., Lu, T. J., Li, F., & Xu, F. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.01.001 · Cited by 166
Ultrathin Epitaxial Cu@Au Core–Shell Nanowires for Stable Transparent Conductors
Niu, Z., Cui, F., Yu, Y., Becknell, N., Sun, Y., Khanarian, G., Kim, D., Dou, L., Dehestani, A., Schierle-Arndt, K., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02884 · Cited by 162
Graphene and the related conductive inks for flexible electronics
Yang, W., & Wang, C. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc01625a · Cited by 161
Yeo, J., Kim, G., Hong, S., Kim, M. S., Kim, D., Lee, J., Lee, H., Kwon, J., Suh, Y. D., Kang, H. W., et al. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.012 · Cited by 155
Highly transparent paper with tunable haze for green electronics
Fang, Z., Zhu, H., Bao, W., Preston, C., Liu, Z., Dai, J., Li, Y., & Hu, L. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02236j · Cited by 153
Silver Chloride as a Heterogeneous Nucleant for the Growth of Silver Nanowires
Schuette, W. M., & Buhro, W. E. (2013) · ACS Nano · doi:10.1021/nn400414h · Cited by 153
Lu, H., Lin, J., Wu, N., Nie, S., Luo, Q., Ma, C., & Cui, Z. (2015) · Applied Physics Letters · doi:10.1063/1.4913697 · Cited by 144
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Secor, E. B., & Hersam, M. C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502431r · Cited by 142
Scaling and Optimization of Gravure-Printed Silver Nanoparticle Lines for Printed Electronics
Sung, D., Vornbrock, A. D. L. F., & Subramanian, V. (2009) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2009.2021464 · Cited by 141
Patterning of micro-scale conductive networks using reel-to-reel flexographic printing
Deganello, D., Cherry, J. A., Gethin, D. T., & Claypole, T. C. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2010.05.125 · Cited by 140
An Ag-grid/graphene hybrid structure for large-scale, transparent, flexible heaters
Kang, J., Jang, Y., Kim, Y., Cho, S.-H., Suhr, J., Hong, B. H., Choi, J., & Byun, D. (2015) · Nanoscale · doi:10.1039/c4nr06984f · Cited by 139
Voigt, M. M., Guite, A., Chung, D., Khan, R. U. A., Campbell, A. J., Bradley, D. D. C., Meng, F., Steinke, J. H. G., Tierney, S., McCulloch, I. A., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901597 · Cited by 136
Recent developments and directions in printed nanomaterials
Choi, H. W., Zhou, T., Singh, M., & Jabbour, G. E. (2014) · Nanoscale · doi:10.1039/c4nr03915g · Cited by 134
Ultrathin high-resolution flexographic printing using nanoporous stamps
Kim, S., Sojoudi, H., Zhao, H., Mariappan, D. D., McKinley, G. H., Gleason, K. K., & Hart, A. J. (2016) · Science Advances · doi:10.1126/sciadv.1601660 · Cited by 132
A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
Lee, W., Koo, H., Sun, J., Noh, J., Kwon, K.-S., Yeom, C., Choi, Y., Chen, K., Javey, A., & Cho, G. (2015) · Scientific Reports · doi:10.1038/srep17707 · Cited by 130
Lu, H., Zhang, D., Ren, X., Liu, J., & Choy, W. C. H. (2014) · ACS Nano · doi:10.1021/nn504969z · Cited by 129
Transferable self-welding silver nanowire network as high performance transparent flexible electrode
Zhu, S., Gao, Y., Hu, B., Li, J., Su, J., Fan, Z., & Zhou, J. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/33/335202 · Cited by 128
Highly Sensitive and Very Stretchable Strain Sensor Based on a Rubbery Semiconductor
Kim, H., Thukral, A., & Yu, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17709 · Cited by 128
Rolling Silver Nanowire Electrodes: Simultaneously Addressing Adhesion, Roughness, and Conductivity
Hauger, T. C., Al-Rafia, S. M. I., & Buriak, J. M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403986f · Cited by 123
Halide Welding for Silver Nanowire Network Electrode
Kang, H., Kim, Y., Cheon, S., Yi, G., & Cho, J. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09839 · Cited by 121
Inkjet Printing of Silver Nanowires for Stretchable Heaters
Huang, Q., Al‐Milaji, K. N., & Zhao, H. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00830 · Cited by 118
Self-citationAngmo, D., Andersen, T. R., Bentzen, J. J., Helgesen, M., Søndergaard, R. R., Jørgensen, M., Carlé, J. E., Bundgaard, E., & Krebs, F. C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501887 · Cited by 114
Maisch, P., Tam, K. C., Lucera, L., Egelhaaf, H., Scheiber, H., Maier, E., & Brabec, C. J. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.08.006 · Cited by 113
Highly flexible and transparent film heaters based on polyimide films embedded with silver nanowires
Huang, Q., Shen, W., Fang, X., Chen, G., Guo, J., Xu, W., Tan, R., & Song, W. (2015) · RSC Advances · doi:10.1039/c5ra06529a · Cited by 109
Self-citationHernandez‐Sosa, G., Bornemann, N., Ringle, I., Agari, M., Dörsam, E., Mechau, N., & Lemmer, U. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202862 · Cited by 106
Inkjet-printed stretchable silver electrode on wave structured elastomeric substrate
Chung, S., Lee, J., Song, H., Kim, S., Jeong, J., & Hong, Y. (2011) · Applied Physics Letters · doi:10.1063/1.3578398 · Cited by 106
Larsen‐Olsen, T. T., Andreasen, B., Andersen, T. R., Böttiger, A. P. L., Bundgaard, E., Norrman, K., Andreasen, J. W., Jørgensen, M., & Krebs, F. C. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.026 · Cited by 105
Benatto, G. A. D. R., Roth, B., Corazza, M., Søndergaard, R. R., Gevorgyan, S. A., Jørgensen, M., & Krebs, F. C. (2015) · Nanoscale · doi:10.1039/c5nr07426f · Cited by 104
Rheological Control of the Coffee Stain Effect for Inkjet Printing of Ceramics
Friederich, A., Binder, J. R., & Bauer, W. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12385 · Cited by 103
An, B. W., Kim, K., Kim, M., Kim, S.-Y., Hur, S. H., & Park, J. (2015) · Small · doi:10.1002/smll.201403131 · Cited by 103
Sears, K., Fievez, M., Gao, M., Weerasinghe, H. C., Easton, C. D., & Vak, D. (2017) · Solar RRL · doi:10.1002/solr.201700059 · Cited by 99
Cited by
Natural Biopolymer-Based Biocompatible Conductors for Stretchable Bioelectronics
Wang, C., Yokota, T., & Someya, T. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00897 · Cited by 412
Wu, H., Yang, G., Zhu, K., Liu, S., Guo, W., Jiang, Z., & Li, Z. (2021) · Advanced Science · doi:10.1002/advs.202001938 · Cited by 395
Enzymatic upgrading of nanochitin using an ancient lytic polysaccharide monooxygenase
(2022) · doi:10.1038/s43246-022-00277-9 · Cited by 16
Metadata
- Authors
- Huang, Q., & Zhu, Y.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2019-01-25
- Volume
- 4
- Issue
- 5
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2911679930
- Cited by
- 482
- References
- 267
- FWCI
- 23.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.