The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Abstract
Ni‐rich layered oxides and Li‐rich layered oxides are topics of much research interest as cathodes for Li‐ion batteries due to their low cost and higher discharge capacities compared to those of LiCoO 2 and LiMn 2 O 4. However, Ni‐rich layered oxides have several pitfalls, including difficulty in synthesizing a well‐ordered material with all Ni 3+ ions, poor cyclability, moisture sensitivity, a thermal runaway reaction, and formation of a harmful surface layer caused by side reactions with the electrolyte. Recent efforts towards Ni‐rich layered oxides have centered on optimizing the composition and processing conditions to obtain controlled bulk and surface compositions to overcome the capacity fade. Li‐rich layered oxides also have negative aspects, including oxygen loss from the lattice during first charge, a large first cycle irreversible capacity loss, poor rate capability, side reactions with the electrolyte, low tap density, and voltage decay during extended cycling. Recent work on Li‐rich layered oxides has focused on understanding the surface and bulk structures and eliminating the undesirable properties. Followed by a brief introduction, an account of recent developments on the understanding and performance gains of Ni‐rich and Li‐rich layered oxide cathodes is provided, along with future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Self-citationArmstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationLayered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries
Ohzuku, T., & Makimura, Y. (2001) · Chemistry Letters · doi:10.1246/cl.2001.642 · Cited by 1,388
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Yabuuchi, N., Yoshii, K., Myung, S.-T., Nakai, I., & Komaba, S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108588y · Cited by 1,188
Self-citationXiao, J., Wan, L., Yang, S., Xiao, F., & Wang, S. (2014) · Nano Letters · doi:10.1021/nl404199v · Cited by 1,110
Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries
Thackeray, M. M., Johnson, C. S., Vaughey, J. T., Ha N. LiCurrent address eVionyx Inc., & Hackney, S. A. (2005) · Journal of Materials Chemistry · doi:10.1039/b417616m · Cited by 1,109
Nanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
Self-citation
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Self-citationHigh‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Enabling High-Voltage Lithium-Metal Batteries under Practical Conditions
Ren, X., Zou, L., Cao, X., Engelhard, M. H., Liu, W., Burton, S. D., Lee, H., Niu, C., Matthews, B. E., Zhu, Z., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.006 · Cited by 1,092
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Self-citationHigh-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Li, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
Building Safe Lithium-Ion Batteries for Electric Vehicles: A Review
Duan, J., Tang, X., Dai, H., Yang, Y., Wu, W., Wei, X., & Huang, Y. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00060-4 · Cited by 893
Yan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Expanded hydrated vanadate for high-performance aqueous zinc-ion batteries
Liu, C., Neale, Z., Zheng, J., Jia, X., Huang, J., Yan, M., Tian, M., Wang, M., Yang, J., & Cao, G. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00956f · Cited by 804
Problems and their origins of Ni-rich layered oxide cathode materials
Zhang, S. S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.013 · Cited by 746
Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries
Li, T., Zhang, X.-Q., Shi, P., & Zhang, Q. (2019) · Joule · doi:10.1016/j.joule.2019.09.022 · Cited by 714
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Yang, H., Wu, H., Ge, M., Li, L., Yuan, Y., Yao, Q., Chen, J., Xia, L., Zheng, J., Chen, Z., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808825 · Cited by 630
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries
Manthiram, A., Song, B., & Li, W. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.007 · Cited by 628
Self-citationReviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Eum, D., Kim, B., Kim, S. J., Park, H., Wu, J., Cho, S.-P., Yoon, G., Lee, M. H., Jung, S.-K., Yang, W., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0572-4 · Cited by 590
Thermally modulated lithium iron phosphate batteries for mass-market electric vehicles
Yang, X.-G., Liu, T., & Wang, C.-Y. (2021) · Nature Energy · doi:10.1038/s41560-020-00757-7 · Cited by 579
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Self-citationRecent Advances in Silicon‐Based Electrodes: From Fundamental Research toward Practical Applications
Ge, M., Cao, C., Biesold, G. M., Sewell, C. D., Hao, S., Huang, J., Zhang, W., Lai, Y., & Lin, Z. (2021) · Advanced Materials · doi:10.1002/adma.202004577 · Cited by 524
Injection of oxygen vacancies in the bulk lattice of layered cathodes
Yan, P., Zheng, J., Tang, Z.-K., Devaraj, A., Chen, G., Amine, K., Zhang, J.-G., Liu, L.-M., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0428-8 · Cited by 520
Li‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization
Zheng, J., Myeong, S., Cho, W., Yan, P., Xiao, J., Wang, C., Cho, J., & Zhang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601284 · Cited by 513
Eshetu, G. G., Zhang, H., Judez, X., Adenusi, H., Armand, M., Passerini, S., & Figgemeier, E. (2021) · Nature Communications · doi:10.1038/s41467-021-25334-8 · Cited by 485
Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?
Liu, Q., Hu, Z., Li, W., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S.-X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02997a · Cited by 468
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Self-citationTwo‐Dimensional Metal Oxide Nanomaterials for Next‐Generation Rechargeable Batteries
Mei, J., Liao, T., Kou, L., & Sun, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700176 · Cited by 459
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Ni‐Rich/Co‐Poor Layered Cathode for Automotive Li‐Ion Batteries: Promises and Challenges
Wang, X., Ding, Y., Deng, Y., & Chen, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903864 · Cited by 427
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Maleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M., Edström, K., Ayerbe, E., Berecibar, M., Bhowmik, A., Castelli, I. E., Clark, S., Dominko, R., Erakca, M., Franco, A. A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102904 · Cited by 376
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Yang, Z., Huang, H., & Lin, F. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200383 · Cited by 366
Kwak, H., Wang, S., Park, J., Liu, Y., Kim, K. T., Choi, Y., Mo, Y., & Jung, Y. S. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00438 · Cited by 341
Ren, X., Gao, P., Zou, L., Jiao, S., Cao, X., Zhang, X., Jia, H., Engelhard, M. H., Matthews, B. E., Wu, H., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2010852117 · Cited by 340
The Recycling of Spent Lithium-Ion Batteries: a Review of Current Processes and Technologies
Li, L., Zhang, X., Li, M., Chen, R., Wu, F., Amine, K., & Lu, J. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0012-1 · Cited by 337
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
Kim, K., Ma, H., Park, S., & Choi, N.-S. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00468 · Cited by 314
Xu, G., Liu, X., Daali, A., Amine, R., Chen, Z., & Amine, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004748 · Cited by 313
Yan, P., Zheng, J., Chen, T., Luo, L., Jiang, Y., Wang, K., Sui, M., Zhang, J.-G., Zhang, S., & Wang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-04862-w · Cited by 310
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material
Lim, J.-M., Hwang, T., Kim, D., Park, M.-S., Cho, K., & Cho, M. (2017) · Scientific Reports · doi:10.1038/srep39669 · Cited by 305
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Ruess, R., Schweidler, S., Hemmelmann, H., Conforto, G., Bielefeld, A., Weber, D. A., Sann, J., Elm, M. T., & Janek, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9a2c · Cited by 271
A review on the stability and surface modification of layered transition-metal oxide cathodes
Kim, J.-M., Zhang, X., Zhang, J.-G., Manthiram, A., Meng, Y. S., & Xu, W. (2021) · Materials Today · doi:10.1016/j.mattod.2020.12.017 · Cited by 270
Self-citationDeng, T., Fan, X., Cao, L., Chen, J., Hou, S., Ji, X., Chen, L., Li, S., Zhou, X., Hu, E., et al. (2019) · Joule · doi:10.1016/j.joule.2019.08.004 · Cited by 266
Song, B., Li, W., Oh, S.-M., & Manthiram, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00070 · Cited by 257
Self-citationZou, Y., Cao, Z., Zhang, J., Wahyudi, W., Wu, Y., Liu, G., Li, Q., Cheng, H., Zhang, D., Park, G., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102964 · Cited by 256
Self-citationThe significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
Zhao, J., Feng, X., Wang, J., Lian, Y., Ouyang, M., & Burke, A. F. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121949 · Cited by 152
Kim, T., Ono, L. K., & Qi, Y. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta07565b · Cited by 119
Wu, Z., Li, S., Zheng, Y., Zhang, Z., Umesh, E., Zheng, B., Zheng, X., & Yang, Y. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0331811jes · Cited by 56
Metadata
- Authors
- Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-10-07
- Volume
- 6
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2127194196
- Cited by
- 1,202
- References
- 108
- FWCI
- 38.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.