The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Toward a Low‐Cost Artificial Leaf: Driving Carbon‐Based and Bifunctional Catalyst Electrodes with Solution‐Processed Perovskite Photovoltaics
Open accessAbstract
Molecular hydrogen can be generated renewably by water splitting with an “artificial‐leaf device”, which essentially comprises two electrocatalyst electrodes immersed in water and powered by photovoltaics. Ideally, this device should operate efficiently and be fabricated with cost‐efficient means using earth‐abundant materials. Here, a lightweight electrocatalyst electrode, comprising large surface‐area NiCo 2 O 4 nanorods that are firmly anchored onto a carbon–paper current collector via a dense network of nitrogen‐doped carbon nanotubes is presented. This electrocatalyst electrode is bifunctional in that it can efficiently operate as both anode and cathode in the same alkaline solution, as quantified by a delivered current density of 10 mA cm−2 at an overpotential of 400 mV for each of the oxygen and hydrogen evolution reactions. By driving two such identical electrodes with a solution‐processed thin‐film perovskite photovoltaic assembly, a wired artificial‐leaf device is obtained that features a Faradaic H 2 evolution efficiency of 100%, and a solar‐to‐hydrogen conversion efficiency of 6.2%. A detailed cost analysis is presented, which implies that the material‐payback time of this device is of the order of 100 days.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Walter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Powering the planet: Chemical challenges in solar energy utilization
Lewis, N. S., & Nocera, D. G. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0603395103 · Cited by 8,310
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Subbaraman, R., Tripkovic, D., Chang, K.-C., Strmcnik, D., Paulikas, A. P., Hirunsit, P., Chan, M., Greeley, J., Stamenkovic, V., & Markovic, N. M. (2012) · Nature Materials · doi:10.1038/nmat3313 · Cited by 3,053
Compilation of Henry's law constants (version 4.0) for water as solvent
Sander, R. (2015) · Atmospheric Chemistry and Physics · doi:10.5194/acp-15-4399-2015 · Cited by 2,873
Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
Luo, J., Im, J.-H., Mayer, M. T., Schreier, M., Nazeeruddin, M. K., Park, N.-G., Tilley, S. D., Fan, H. J., & Grätzel, M. (2014) · Science · doi:10.1126/science.1258307 · Cited by 2,509
Solar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
Cited by
Advances and challenges in understanding the electrocatalytic conversion of carbon dioxide to fuels
Birdja, Y. Y., Pérez-Gallent, E., Figueiredo, M. C., Göttle, A. J., Calle-Vallejo, F., & Koper, M. T. M. (2019) · Nature Energy · doi:10.1038/s41560-019-0450-y · Cited by 2,747
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
Quantifying inactive lithium in lithium metal batteries
Fang, C., Li, J., Zhang, M., Zhang, Y., Yang, F., Lee, J. Z., Lee, M.-H., Alvarado, J., Schroeder, M. A., Yang, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1481-z · Cited by 1,413
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Hard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry
Dou, X., Hasa, I., Saurel, D., Vaalma, C., Wu, L., Buchholz, D., Bresser, D., Komaba, S., & Passerini, S. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.040 · Cited by 1,062
All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors
Jiang, Q., Kurra, N., Alhabeb, M., Gogotsi, Y., & Alshareef, H. N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703043 · Cited by 1,033
Zheng, Y., Yao, Y., Ou, J., Li, M., Luo, D., Dou, H., Li, Z., Amine, K., Yu, A., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00305k · Cited by 1,030
Wadsworth, A., Moser, M., Marks, A., Little, M. S., Gasparini, N., Brabec, C. J., Baran, D., & McCulloch, I. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00892a · Cited by 986
Laser‐Induced Graphene: From Discovery to Translation
Ye, R., James, D. K., & Tour, J. M. (2019) · Advanced Materials · doi:10.1002/adma.201803621 · Cited by 942
Sodium‐Ion Battery Materials and Electrochemical Properties Reviewed
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800079 · Cited by 733
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Polyaniline (PANi) based electrode materials for energy storage and conversion
Wang, H., Lin, J., & Shen, Z. X. (2016) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2016.08.001 · Cited by 631
Flexible Zn– and Li–air batteries: recent advances, challenges, and future perspectives
Tan, P., Chen, B., Xu, H., Zhang, H., Cai, W., Ni, M., Liu, M., & Shao, Z. (2017) · Energy Environ. Sci. · doi:10.1039/c7ee01913k · Cited by 583
Strategies for stable water splitting via protected photoelectrodes
Bae, D., Seger, B., Vesborg, P. C. K., Hansen, O., & Chorkendorff, I. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00918b · Cited by 572
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Roadmap and roadblocks for the band gap tunability of metal halide perovskites
Unger, E. L., Kegelmann, L., Suchan, K., Sörell, D., Korte, L., & Albrecht, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00404d · Cited by 452
Cyclic stability of supercapacitors: materials, energy storage mechanism, test methods, and device
Wu, Q., He, T., Zhang, Y., Zhang, J., Wang, Z., Liu, Y., Zhao, L., Wu, Y., & Ran, F. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta06815f · Cited by 449
Bhatta, T., Maharjan, P., Cho, H., Park, C., Yoon, S. H., Sharma, S., Salauddin, M., Rahman, M. T., Rana, S. S., & Park, J. Y. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105670 · Cited by 437
Wang, H., Li, C., Fang, P., Zhang, Z., & Zhang, J. Z. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00314a · Cited by 430
Karmakar, A., Karthick, K., Sankar, S. S., Kumaravel, S., Madhu, R., & Kundu, S. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09788h · Cited by 414
Point defect engineering in thin-film solar cells
Park, J. S., Kim, S., Xie, Z., & Walsh, A. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0026-7 · Cited by 411
Computation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
Is direct seawater splitting economically meaningful?
Hausmann, J. N., Schlögl, R., Menezes, P. W., & Driess, M. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03659e · Cited by 388
Progress in TENG technology—A journey from energy harvesting to nanoenergy and nanosystem
Zhu, J., Zhu, M., Shi, Q., Wen, F., Liu, L., Dong, B., Haroun, A., Yang, Y., Vachon, P., Guo, X., et al. (2020) · EcoMat · doi:10.1002/eom2.12058 · Cited by 370
Hierarchical Nanostructures: Design for Sustainable Water Splitting
Fang, M., Dong, G., Wei, R., & Ho, J. C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700559 · Cited by 357
2D boron nitride nanosheets for polymer composite materials
Rasul, M. G., Kiziltas, A., Arfaei, B., & Shahbazian-Yassar, R. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00231-2 · Cited by 332
Liu, S., Lee, S. C., Patil, U., Shackery, I., Kang, S., Zhang, K., Park, J. H., Chung, K. Y., & Chan Jun, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07842g · Cited by 329
Shallow Iodine Defects Accelerate the Degradation of α-Phase Formamidinium Perovskite
Tan, S., Yavuz, I., Weber, M. H., Huang, T., Chen, C.-H., Wang, R., Wang, H.-C., Ko, J. H., Nuryyeva, S., Xue, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.08.016 · Cited by 324
Review: Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications
Ganesamoorthy, R., Sathiyan, G., & Sakthivel, P. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.11.024 · Cited by 323
Hard carbons for sodium-ion batteries and beyond
Xie, F., Xu, Z., Guo, Z., & Titirici, M.-M. (2020) · Progress in Energy · doi:10.1088/2516-1083/aba5f5 · Cited by 319
High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture
Hitz, G. T., McOwen, D. W., Zhang, L., Ma, Z., Fu, Z., Wen, Y., Gong, Y., Dai, J., Hamann, T. R., Hu, L., et al. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.004 · Cited by 318
Paolella, A., Faure, C., Timoshevskii, V., Marras, S., Bertoni, G., Guerfi, A., Vijh, A., Armand, M., & Zaghib, K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05121b · Cited by 306
CuCo Hybrid Oxides as Bifunctional Electrocatalyst for Efficient Water Splitting
Kuang, M., Han, P., Wang, Q., Li, J., & Zheng, G. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604804 · Cited by 303
Recent advances in high performance donor-acceptor polymers for organic photovoltaics
Holliday, S., Li, Y., & Luscombe, C. K. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.003 · Cited by 288
Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries
Wang, C., Xie, H., Zhang, L., Gong, Y., Pastel, G., Dai, J., Liu, B., Wachsman, E. D., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701963 · Cited by 278
Paolella, A., Faure, C., Bertoni, G., Marras, S., Guerfi, A., Darwiche, A., Hovington, P., Commarieu, B., Wang, Z., Prato, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms14643 · Cited by 272
Ganesan, P., Sivanantham, A., & Shanmugam, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04499a · Cited by 265
Effect of water activity on rates of serpentinization of olivine
Lamadrid, H. M., Rimstidt, J. D., Schwarzenbach, E. M., Klein, F., Ulrich, S., Dolocan, A., & Bodnar, R. J. (2017) · Nature Communications · doi:10.1038/ncomms16107 · Cited by 150
Herbol, H. C., Hu, W., Frazier, P., Clancy, P., & Poloczek, M. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0106-7 · Cited by 121
2D Titanium Carbide/Reduced Graphene Oxide Heterostructures for Supercapacitor Applications
Navarro‐Suárez, A. M., Maleski, K., Makaryan, T., Yan, J., Anasori, B., & Gogotsi, Y. (2018) · Batteries & Supercaps · doi:10.1002/batt.201800014 · Cited by 108
Riyajuddin, S., Pahuja, M., Sachdeva, P. K., Azmi, K., Kumar, S., Afshan, M., Ali, F., Sultana, J., Maruyama, T., Bera, C., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c00466 · Cited by 95
A Low-Cost and High-Efficiency Integrated Device toward Solar-Driven Water Splitting
Liang, J., Han, X., Qiu, Y., Fang, Q., Zhang, B., Wang, W., Zhang, J., Ajayan, P. M., & Lou, J. (2020) · ACS Nano · doi:10.1021/acsnano.9b09053 · Cited by 68
From cellulose to graphene-like porous carbon nanosheets
Perondi, D., Bassanesi, G. R., Manera, C., Lazzari, L. K., Godinho, M., Zattera, A. J., & Dotto, G. L. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111217 · Cited by 42
Degradation of inverted architecture CH3NH3PbI3‐xC lx perovskite solar cells due to trapped moisture
Bracher, C., Freestone, B. G., Mohamad, D. K., Smith, J. A., & Lidzey, D. G. (2018) · Energy Science & Engineering · doi:10.1002/ese3.180 · Cited by 27
Metadata
- Authors
- Sharifi, T., Larsen, C., Wang, J., Kwong, W. L., Gracia‐Espino, E., Mercier, G., Messinger, J., Wågberg, T., & Edman, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-07-19
- Volume
- 6
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2503287062
- Cited by
- 639
- References
- 66
- FWCI
- 27.00
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.