The DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
Na‐Ion Batteries for Large Scale Applications: A Review on Anode Materials and Solid Electrolyte Interphase Formation
Abstract
The urgent need for optimizing the available energy through smart grids and efficient large‐scale energy storage systems is pushing the construction and deployment of Li‐ion batteries in the MW range which, in the long term, are expected to hit the GW dimension while demanding over 1000 ton of positive active material per system. This amount of Li‐based material is equivalent to almost 1% of current Li consumption and can strongly influence the evolution of the lithium supply and cost. Given this uncertainty, it becomes mandatory to develop an energy storage technology that depends on almost infinite and widespread resources: Na‐ion batteries are the best technology for large‐scale applications. With small working cells in the market that cannot compete in cost ($/W h) with commercial Li‐ion batteries, the consolidation of Na‐ion batteries mainly depends on increasing their energy density and stability, the negative electrodes being at the heart of these two requirements. Promising Na‐based negative electrodes for large‐scale battery applications are reviewed, along with the study of the solid electrolyte interphase formed in the anode surface, which is at the origin of most of the stability problems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Self-citationRoom-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Electrochemically Active Polymers for Rechargeable Batteries
Novák, P., Müller, K., Santhanam, K. S. V., & Haas, O. (1997) · Chemical Reviews · doi:10.1021/cr941181o · Cited by 1,618
Two-dimensional transition metal dichalcogenide nanosheet-based composites
Tan, C., & Zhang, H. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00182f · Cited by 1,605
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries
Sun, J., Lee, H.-W., Pasta, M., Yuan, H., Zheng, G., Sun, Y., Li, Y., & Cui, Y. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.194 · Cited by 1,480
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Han, M. H., Gonzalo, E., Singh, G., & Rojo, T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03192j · Cited by 1,380
Self-citationMoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
David, L., Bhandavat, R., & Singh, G. (2014) · ACS Nano · doi:10.1021/nn406156b · Cited by 1,212
Tanuma, S., Powell, C. J., & Penn, D. R. (1991) · Surface and Interface Analysis · doi:10.1002/sia.740171304 · Cited by 1,205
Crystallite growth in graphitizing and non-graphitizing carbons
Franklin, R. E. (1951) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1951.0197 · Cited by 1,153
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Conjugated dicarboxylate anodes for Li-ion batteries
Armand, M., Grugeon, S., Vezin, H., Laruelle, S., Ribière, P., Poizot, P., & Tarascon, J.-M. (2009) · Nature Materials · doi:10.1038/nmat2372 · Cited by 1,021
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
Self-citationRecent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
Jache, B., & Adelhelm, P. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403734 · Cited by 963
Calculations of electron inelastic mean free paths for 31 materials
Tanuma, S., Powell, C. J., & Penn, D. R. (1988) · Surface and Interface Analysis · doi:10.1002/sia.740111107 · Cited by 959
Electrochemical intercalation of sodium in NaxCoO2 bronzes
DELMAS, C., BRACONNIER, J., FOUASSIER, C., & HAGENMULLER, P. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90076-x · Cited by 903
Challenges for Na-ion Negative Electrodes
Chevrier, V. L., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3607983 · Cited by 862
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Xu, Y., Zhu, Y., Liu, Y., & Wang, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200346 · Cited by 847
Na2Ti3O7: Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries
Senguttuvan, P., Rousse, G., Seznec, V., Tarascon, J.-M., & Palacín, M. R. (2011) · Chemistry of Materials · doi:10.1021/cm202076g · Cited by 807
Review—Practical Issues and Future Perspective for Na-Ion Batteries
Kubota, K., & Komaba, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151514jes · Cited by 775
The structure of graphitic carbons
Franklin, R. E. (1951) · Acta Crystallographica · doi:10.1107/s0365110x51000842 · Cited by 754
Lithium market research – global supply, future demand and price development
Martin, G., Rentsch, L., Höck, M., & Bertau, M. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.11.004 · Cited by 740
Non-aqueous electrolytes for sodium-ion batteries
Ponrouch, A., Monti, D., Boschin, A., Steen, B., Johansson, P., & Palacín, M. R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04428b · Cited by 731
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
High Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries
Xiong, H., Slater, M. D., Balasubramanian, M., Johnson, C. S., & Rajh, T. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2012066 · Cited by 673
Review—Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries
Irisarri, E., Ponrouch, A., & Palacin, M. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091514jes · Cited by 629
Negative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
The Application of Metal Sulfides in Sodium Ion Batteries
Xiao, Y., Lee, S. H., & Sun, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601329 · Cited by 616
Zhu, H., Jia, Z., Chen, Y., Weadock, N., Wan, J., Vaaland, O., Han, X., Li, T., & Hu, L. (2013) · Nano Letters · doi:10.1021/nl400998t · Cited by 612
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
High‐Capacity Anode Materials for Sodium‐Ion Batteries
Kim, Y., Ha, K., Oh, S. M., & Lee, K. T. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402511 · Cited by 595
Microstructural Evolution of Tin Nanoparticles during In Situ Sodium Insertion and Extraction
Wang, J., Liu, X. H., Mao, S. X., & Huang, J. Y. (2012) · Nano Letters · doi:10.1021/nl303305c · Cited by 583
Ultrasmall Sn Nanoparticles Embedded in Carbon as High‐Performance Anode for Sodium‐Ion Batteries
Liu, Y., Zhang, N., Jiao, L., Tao, Z., & Chen, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402943 · Cited by 581
Zhao, L., Zhao, J., Hu, Y., Li, H., Zhou, Z., Armand, M., & Chen, L. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200166 · Cited by 568
Advanced Organic Electrode Materials for Rechargeable Sodium‐Ion Batteries
Zhao, Q., Lu, Y., & Chen, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601792 · Cited by 551
Li, Y., Xu, S., Wu, X., Yu, J., Wang, Y., Hu, Y.-S., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05451b · Cited by 533
Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries
Park, Y., Shin, D., Woo, S. H., Choi, N. S., Shin, K. H., Oh, S. M., Lee, K. T., & Hong, S. Y. (2012) · Advanced Materials · doi:10.1002/adma.201201205 · Cited by 517
Electrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Chemically Bonded Phosphorus/Graphene Hybrid as a High Performance Anode for Sodium-Ion Batteries
Song, J., Yu, Z., Gordin, M. L., Hu, S., Yi, R., Tang, D., Walter, T., Regula, M., Choi, D., Li, X., et al. (2014) · Nano Letters · doi:10.1021/nl502759z · Cited by 490
Controlling SEI Formation on SnSb‐Porous Carbon Nanofibers for Improved Na Ion Storage
Ji, L., Gu, M., Shao, Y., Li, X., Engelhard, M. H., Arey, B. W., Wang, W., Nie, Z., Xiao, J., Wang, C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201304962 · Cited by 489
Effective Liquid-Phase Exfoliation and Sodium Ion Battery Application of MoS2 Nanosheets
Bang, G. S., Nam, K. W., Kim, J. Y., Shin, J., Choi, J. W., & Choi, S.-Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4060222 · Cited by 484
High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte
Ponrouch, A., Goñi, A. R., & Palacín, M. R. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.10.038 · Cited by 475
Update on anode materials for Na-ion batteries
Kang, H., Liu, Y., Cao, K., Zhao, Y., Jiao, L., Wang, Y., & Yuan, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03181h · Cited by 468
Recent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
Anatase Titania Nanorods as an Intercalation Anode Material for Rechargeable Sodium Batteries
Kim, K.-T., Ali, G., Chung, K. Y., Yoon, C. S., Yashiro, H., Sun, Y., Lu, J. B., Amine, K., & Myung, S. (2014) · Nano Letters · doi:10.1021/nl402747x · Cited by 452
Lithium-Ion Batteries: Solid-Electrolyte Interphase
Balbuena, P. B., & Wang, Y. (2004) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/p291 · Cited by 441
Liu, J., Kopold, P., Wu, C., van Aken, P. A., Maier, J., & Yu, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02074c · Cited by 439
Extended π-Conjugated System for Fast-Charge and -Discharge Sodium-Ion Batteries
Wang, C., Xu, Y., Fang, Y., Zhou, M., Liang, L., Singh, S., Zhao, H., Schober, A., & Lei, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00336 · Cited by 438
Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell
Komaba, S., Matsuura, Y., Ishikawa, T., Yabuuchi, N., Murata, W., & Kuze, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.017 · Cited by 418
Advances and challenges of sodium ion batteries as post lithium ion batteries
Sawicki, M., & Shaw, L. L. (2015) · RSC Advances · doi:10.1039/c5ra08321d · Cited by 401
Tin Phosphide as a Promising Anode Material for Na‐Ion Batteries
Kim, Y., Kim, Y., Choi, A., Woo, S., Mok, D., Choi, N., Jung, Y. S., Ryu, J. H., Oh, S. M., & Lee, K. T. (2014) · Advanced Materials · doi:10.1002/adma.201305638 · Cited by 393
MnFe2O4@C Nanofibers as High-Performance Anode for Sodium-Ion Batteries
Liu, Y., Zhang, N., Yu, C., Jiao, L., & Chen, J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00942 · Cited by 392
The auger parameter, its utility and advantages: a review
Wagner, C. D., & Joshi, A. (1988) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(88)85018-7 · Cited by 384
Electrochemical Properties of NaTi2(PO4)3 Anode for Rechargeable Aqueous Sodium-Ion Batteries
Park, S. I., Gocheva, I., Okada, S., & Yamaki, J.-I. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3611434 · Cited by 377
Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
Bommier, C., Luo, W., Gao, W.-Y., Greaney, A., Ma, S., & Ji, X. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.064 · Cited by 372
Biomass derived carbon nanoparticle as anodes for high performance sodium and lithium ion batteries
Gaddam, R. R., Yang, D., Narayan, R., Raju, K., Kumar, N. A., & Zhao, X. S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.047 · Cited by 363
Mechanistic insights into sodium storage in hard carbon anodes using local structure probes
Stratford, J. M., Allan, P. K., Pecher, O., Chater, P. A., & Grey, C. P. (2016) · Chemical Communications · doi:10.1039/c6cc06990h · Cited by 359
Shen, F., Luo, W., Dai, J., Yao, Y., Zhu, M., Hitz, E., Tang, Y., Chen, Y., Sprenkle, V. L., Li, X., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600377 · Cited by 318
Li, W., Chou, S., Wang, J., Kim, J. H., Liu, H., & Dou, S. (2014) · Advanced Materials · doi:10.1002/adma.201400794 · Cited by 317
Anatase TiO2 nanoparticles for high power sodium-ion anodes
Wu, L., Buchholz, D., Bresser, D., Chagas, L. G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.083 · Cited by 312
Lithium Insertion in High Capacity Carbonaceous Materials
Zheng, T., Liu, Y., FULLER, E., et al. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2050057 · Cited by 308
Biologically inspired pteridine redox centres for rechargeable batteries
Hong, J., Lee, M., Lee, B., Seo, D.-H., Park, C. B., & Kang, K. (2014) · Nature Communications · doi:10.1038/ncomms6335 · Cited by 307
High-Capacity, High-Rate Bi–Sb Alloy Anodes for Lithium-Ion and Sodium-Ion Batteries
Zhao, Y., & Manthiram, A. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00616 · Cited by 297
Simone, V., Boulineau, A., de Geyer, A., Rouchon, D., Simonin, L., & Martinet, S. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.04.016 · Cited by 294
Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Luo, W., Bommier, C., Jian, Z., Li, X., Carter, R., Vail, S., Lu, Y., Lee, J.-J., & Ji, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507679x · Cited by 293
Fabrication of transition metal selenides and their applications in energy storage
Lu, T., Dong, S., Zhang, C., Zhang, L., & Cui, G. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2016.11.005 · Cited by 292
Prussian blue analogues: a new class of anode materials for lithium ion batteries
Nie, P., Shen, L., Luo, H., Ding, B., Xu, G., Wang, J., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00062e · Cited by 280
Bhide, A., Hofmann, J., Katharina Dürr, A., Janek, J., & Adelhelm, P. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53077a · Cited by 275
Sodium insertion in carboxylate based materials and their application in 3.6 V full sodium cells
Abouimrane, A., Weng, W., Eltayeb, H., Cui, Y., Niklas, J., Poluektov, O., & Amine, K. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22864e · Cited by 273
Liu, J., Wen, Y., van Aken, P. A., Maier, J., & Yu, Y. M. (2014) · Nano Letters · doi:10.1021/nl5028606 · Cited by 273
Highly Stable Sodium Batteries Enabled by Functional Ionic Polymer Membranes
Wei, S., Choudhury, S., Xu, J., Nath, P., Tu, Z., & Archer, L. A. (2017) · Advanced Materials · doi:10.1002/adma.201605512 · Cited by 267
Electrochemical insertion of sodium into hard carbons
Thomas, P., & Billaud, D. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00250-5 · Cited by 257
Low-Potential Sodium Insertion in a NASICON-Type Structure through the Ti(III)/Ti(II) Redox Couple
Senguttuvan, P., Rousse, G., Arroyo y de Dompablo, M. E., Vezin, H., Tarascon, J.-M., & Palacín, M. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311044t · Cited by 252
NaxVO2 as possible electrode for Na-ion batteries
Hamani, D., Ati, M., Tarascon, J.-M., & Rozier, P. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.06.005 · Cited by 247
Park, J., Kim, J.-S., Park, J.-W., Nam, T.-H., Kim, K.-W., Ahn, J.-H., Wang, G., & Ahn, H.-J. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.01.057 · Cited by 241
Carbon dots supported upon N-doped TiO 2 nanorods applied into sodium and lithium ion batteries
Yang, Y., Ji, X., Jing, M., Hou, H., Zhu, Y., Fang, L., Yang, X., Chen, Q., & Banks, C. E. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05611f · Cited by 235
Dahbi, M., Nakano, T., Yabuuchi, N., Ishikawa, T., Kubota, K., Fukunishi, M., Shibahara, S., Son, J.-Y., Cui, Y.-T., Oji, H., et al. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.04.014 · Cited by 228
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
High Capacity of Hard Carbon Anode in Na-Ion Batteries Unlocked by PO x Doping
Li, Z., Ma, L., Surta, T. W., Bommier, C., Jian, Z., Xing, Z., Stickle, W. F., Dolgos, M., Amine, K., Lu, J. B., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00172 · Cited by 221
Muñoz‐Márquez, M. Á., Zarrabeitia, M., Castillo‐Martínez, E., Eguía-Barrio, A., Rojo, T., & Casas‐Cabanas, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01375 · Cited by 218
Self-citationDahbi, M., Nakano, T., Yabuuchi, N., Fujimura, S., Chihara, K., Kubota, K., Son, J., Cui, Y., Oji, H., & Komaba, S. (2016) · ChemElectroChem · doi:10.1002/celc.201600365 · Cited by 218
Shirpour, M., Cabana, J., & Doeff, M. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41037d · Cited by 217
Investigation of the Electrochemical Windows of Aprotic Alkali Metal (Li, Na, K) Salt Solutions
Moshkovich, M., Gofer, Y., & Aurbach, D. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1357316 · Cited by 213
Li, D., Zhou, J., Chen, X., & Song, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09444 · Cited by 203
Recent Development on Anodes for Na‐Ion Batteries
Bommier, C., & Ji, X. (2015) · Israel Journal of Chemistry · doi:10.1002/ijch.201400118 · Cited by 202
Electrochemical and thermal properties of hard carbon-type anodes for Na-ion batteries
Zhao, J., Zhao, L., Chihara, K., Okada, S., Yamaki, J.-I., Matsumoto, S., Kuze, S., & Nakane, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.109 · Cited by 182
Electrochemical sodium storage of TiO2(B) nanotubes for sodium ion batteries
Huang, J. P., Yuan, D. D., Zhang, H. Z., Cao, Y. L., Li, G. R., Yang, H. X., & Gao, X. P. (2013) · RSC Advances · doi:10.1039/c3ra42413h · Cited by 181
David, L., & Singh, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5080847 · Cited by 178
Cobalt phosphide as a new anode material for sodium storage
Li, W., Yang, Q., Chou, S., Wang, J., & Liu, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.097 · Cited by 173
All Organic Sodium‐Ion Batteries with Na4C8H2O6
Wang, S., Wang, L., Zhu, Z., Hu, Z., Zhao, Q., & Chen, J. (2014) · Angewandte Chemie · doi:10.1002/ange.201400032 · Cited by 164
A new low-voltage plateau of Na3V2(PO4)3as an anode for Na-ion batteries
Jian, Z., Sun, Y., & Ji, X. (2015) · Chemical Communications · doi:10.1039/c5cc00944h · Cited by 161
Liu, J., Yang, Z., Wang, J., Gu, L., Maier, J., & Yu, Y. M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.020 · Cited by 158
Yolk–Shell Sn@C Eggette-like Nanostructure: Application in Lithium-Ion and Sodium-Ion Batteries
Li, S., Wang, Z., Liu, J., Yang, L., Guo, Y., Cheng, L., Lei, M., & Wang, W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04736 · Cited by 146
Self-wrapped Sb/C nanocomposite as anode material for High-performance sodium-ion batteries
Duan, J., Zhang, W., Wu, C. J., Fan, Q., Zhang, W., Xianluo, H., & Huang, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.021 · Cited by 145
Cha, H. A., Jeong, H. M., & Kang, J. K. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00041b · Cited by 125
Liu, S., Zhang, H., Xu, L., Ma, L., & Chen, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.056 · Cited by 124
Shale-like Co 3 O 4 for high performance lithium/sodium ion batteries
Li, H., Li, Z.-Y., Wu, X., Zhang, L.-L., Fan, C., Wang, H., Li, X., Wang, K., Sun, H., & Zhang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02417c · Cited by 117
Studies on electrochemical sodium storage into hard carbons with binder-free monolithic electrodes
Hasegawa, G., Kanamori, K., Kannari, N., Ozaki, J., Nakanishi, K., & Abe, T. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.013 · Cited by 113
Amorphous TiO2 inverse opal anode for high-rate sodium ion batteries
Zhou, M., Xu, Y., Wang, C., Li, Q., Xiang, J., Liang, L., Wu, M., Zhao, H., & Lei, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.12.005 · Cited by 112
Mao, J., Fan, X., Luo, C. W., & Wang, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00641 · Cited by 105
Zhou, D., Li, X., Fan, L., & Deng, Y. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.016 · Cited by 105
Hollandite-type TiO 2 : a new negative electrode material for sodium-ion batteries
Pérez‐Flores, J. C., Baehtz, C., Kuhn, A., & García‐Alvarado, F. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13394j · Cited by 98
Walter, M., Doswald, S., & Kovalenko, M. V. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10568d · Cited by 98
Bommier, C., Leonard, D. P., Jian, Z., Stickle, W. F., Greaney, P. A., & Ji, X. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600449 · Cited by 98
Oh, S.-M., Myung, S., Jang, M.-W., Scrosati, B., Hassoun, J., & Sun, Y. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp00070b · Cited by 97
Sangster, J. M. (2007) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-007-9194-7 · Cited by 95
Comparison of the Reactivity of NaxC6 and LixC6 with Non-Aqueous Solvents and Electrolytes
Xia, X., Obrovac, M. N., & Dahn, J. R. (2011) · Electrochemical and Solid-State Letters · doi:10.1149/1.3606364 · Cited by 95
Ultrafast and Highly Reversible Sodium Storage in Zinc‐Antimony Intermetallic Nanomaterials
Nie, A., Gan, L., Cheng, Y., Tao, X., Yuan, Y., Sharifi‐Asl, S., He, K., Asayesh‐Ardakani, H., Vasiraju, V., Lu, J. B., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201504461 · Cited by 93
Embedding tin nanoparticles in micron-sized disordered carbon for lithium- and sodium-ion anodes
Bresser, D., Mueller, F., Buchholz, D., Paillard, E. E., & Passerini, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.09.007 · Cited by 89
Chen, C., Fu, K. K., Lu, Y., Zhu, J., Xue, L., Hu, Y., & Zhang, X. (2015) · RSC Advances · doi:10.1039/c5ra01729g · Cited by 84
Shirpour, M., Cabana, J., & Doeff, M. M. (2014) · Chemistry of Materials · doi:10.1021/cm500342m · Cited by 82
Sreedhara, M. B., Santhosha, A. L., Bhattacharyya, A. J., & Rao, C. N. R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02561g · Cited by 81
Walter, M., Erni, R., & Kovalenko, M. V. (2015) · Scientific Reports · doi:10.1038/srep08418 · Cited by 74
Sustainable Materials for Sustainable Energy Storage: Organic Na Electrodes
Oltean, V. A., Renault, S., Valvo, M., & Brandell, D. (2016) · Materials · doi:10.3390/ma9030142 · Cited by 74
Size and Composition Effects in Sb-Carbon Nanocomposites for Sodium-Ion Batteries
Ramireddy, T., Sharma, N., Xing, T., Chen, Y. I., Leforestier, J., & Glushenkov, A. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09619 · Cited by 72
Xu, F., Li, Z., Wu, L., Meng, Q., Xin, H. L., Sun, J., Ge, B., Sun, L., & Zhu, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.020 · Cited by 68
Xia, W., Xu, F., Zhu, C., Xin, H. L., Xu, Q., Sun, P., & Sun, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.017 · Cited by 66
Bendi, R., Li, C.-H., Prakash, S., & Chen, C. (2015) · Chemical Communications · doi:10.1039/c5cc07621h · Cited by 65
Ball-milled FeP/graphite as a low-cost anode material for the sodium-ion battery
Yang, Q., Li, W., Chou, S., Wang, J., & Liu, H. (2015) · RSC Advances · doi:10.1039/c5ra18314f · Cited by 61
Understanding the Orderliness of Atomic Arrangement toward Enhanced Sodium Storage
Zhou, M., Xu, Y., Xiang, J., Wang, C., Liang, L., Wen, L., Fang, Y., Mi, Y., & Lei, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600448 · Cited by 61
Exploring the Low Voltage Behavior of V2O5Aerogel as Intercalation Host for Sodium Ion Battery
Moretti, A., Secchiaroli, M., Buchholz, D., Giuli, G., Marassi, R., & Passerini, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0711514jes · Cited by 59
Ultrafine potassium titanate nanowires: a new Ti-based anode for sodium ion batteries
Zhang, Q., Guo, Y., Guo, K., Zhai, T., & Li, H. (2016) · Chemical Communications · doi:10.1039/c6cc01057a · Cited by 55
Lee, J., Lee, J. K., Chung, K. Y., Jung, H., Kim, H., Mun, J., & Choi, W. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.110 · Cited by 54
Hard Carbon Fibers Pyrolyzed from Wool as High-Performance Anode for Sodium-Ion Batteries
Zhu, X., Li, Q., Shen, Q., Liu, X., Xiao, L., Ai, X., Yang, H., & Cao, Y. (2016) · JOM · doi:10.1007/s11837-016-2064-1 · Cited by 45
Nickel-titanium oxide as a novel anode material for rechargeable sodium-ion batteries
Kalubarme, R. S., Inamdar, A. I., Bhange, D. S., Im, H., Gosavi, S., & Park, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07306a · Cited by 44
Titanium(III) Sulfate as New Negative Electrode for Sodium-Ion Batteries
Senguttuvan, P., Rousse, G., Vezin, H., Tarascon, J., & Palacín, M. R. (2013) · Chemistry of Materials · doi:10.1021/cm401181b · Cited by 43
A high capacity NiFe2O4/RGO nanocomposites as superior anode materials for sodium-ion batteries
Wu, F., Wang, X., Li, M., & Xu, H. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.099 · Cited by 40
Smith, A. J., MacDonald, M. J., Ellis, L. D., Obrovac, M. N., & Dahn, J. R. (2012) · Carbon · doi:10.1016/j.carbon.2012.03.045 · Cited by 37
Dirican, M., & Zhang, X. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.069 · Cited by 29
Lee, J., Chen, Y.-M., Zhu, Y., et al. (2015) · RSC Advances · doi:10.1039/c5ra14907j · Cited by 21
Liao, S., Yang, G., & Wang, C. (2016) · RSC Advances · doi:10.1039/c6ra24455f · Cited by 16
Cited by
Opportunities and Challenges for Organic Electrodes in Electrochemical Energy Storage
Poizot, P., Gaubicher, J., Renault, S., Dubois, L., Liang, Y., & Yao, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00482 · Cited by 963
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
Saurel, D., Orayech, B., Xiao, B., Carriazo, D., Li, X., & Rojo, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703268 · Cited by 668
Self-citationAdvanced Carbon‐Based Anodes for Potassium‐Ion Batteries
Wu, X., Chen, Y., Xing, Z., Lam, C. W. K., Pang, S., Zhang, W., & Ju, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900343 · Cited by 600
Challenges and Strategies for High‐Energy Aqueous Electrolyte Rechargeable Batteries
Zhang, H., Liu, X., Li, H., Hasa, I., & Passerini, S. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202004433 · Cited by 592
Metadata
- Authors
- Muñoz‐Márquez, M. Á., Saurel, D., Gómez‐Cámer, J. L., Casas‐Cabanas, M., Castillo‐Martínez, E., & Rojo, T.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-07-10
- Volume
- 7
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2734708294
- Cited by
- 338
- References
- 147
- FWCI
- 14.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.