The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Lithium‐Metal Anode Instability of the Superionic Halide Solid Electrolytes and the Implications for Solid‐State Batteries
Open accessAbstract
Owing to high ionic conductivity and good oxidation stability, halide‐based solid electrolytes regain interest for application in solid‐state batteries. While stability at the cathode interface seems to be given, the stability against the lithium metal anode has not been explored yet. Herein, the formation of a reaction layer between Li 3 InCl 6 (Li 3 YCl 6) and lithium is studied by sputter deposition of lithium metal and subsequent in situ X‐ray photoelectron spectroscopy as well as by impedance spectroscopy. The interface is thermodynamically unstable and results in a continuously growing interphase resistance. Additionally, the interface between Li 3 InCl 6 and Li 6 PS 5 Cl is characterized by impedance spectroscopy to discern whether a combined use as cathode electrolyte and separator electrolyte, respectively, might enable long‐term stable and low impedance operation. In fact, oxidation stable halide‐based lithium superionic conductors cannot be used against Li, but may be promising candidates as cathode electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationThe analysis of electrode impedances complicated by the presence of a constant phase element
Brug, G. J., van den Eeden, A. L. G., Sluyters-Rehbach, M., & Sluyters, J. H. (1984) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(84)80324-1 · Cited by 3,718
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D.-S., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,708
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Asano, T., Sakai, A., Ouchi, S., Sakaida, M., Miyazaki, A., & Hasegawa, S. (2018) · Advanced Materials · doi:10.1002/adma.201803075 · Cited by 1,275
Benchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219
Self-citationA facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationWenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Self-citationProgress and perspectives on halide lithium conductors for all-solid-state lithium batteries
Li, X., Liang, J., Yang, X., Adair, K. R., Wang, C., Zhao, F., & Sun, X. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03828k · Cited by 755
Air-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries
Li, X., Liang, J., Luo, J., Norouzi Banis, M., Wang, C., Li, W., Deng, S., Yu, C., Zhao, F., Hu, Y., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02311a · Cited by 753
Wang, S., Bai, Q., Nolan, A. M., Liu, Y., Gong, S., Sun, Q., & Mo, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201901938 · Cited by 654
Auvergniot, J., Cassel, A., Ledeuil, J.-B., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04990 · Cited by 644
Wenzel, S., Sedlmaier, S. J., Dietrich, C., Zeier, W. G., & Janek, J. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2017.07.005 · Cited by 609
Self-citationWenzel, S., Leichtweiss, T., Krüger, D., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.001 · Cited by 607
Self-citationSite-Occupation-Tuned Superionic LixScCl3+xHalide Solid Electrolytes for All-Solid-State Batteries
Liang, J., Li, X., Wang, S., Adair, K. R., Li, W., Zhao, Y., Wang, C., Hu, Y., Zhang, L., Zhao, S., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c00134 · Cited by 567
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Self-citationHartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Self-citationHigh-Voltage Superionic Halide Solid Electrolytes for All-Solid-State Li-Ion Batteries
Park, K.-H., Kaup, K., Assoud, A., Zhang, Q., Wu, X., & Nazar, L. F. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02599 · Cited by 506
Wenzel, S., Weber, D. A., Leichtweiß, T., Busche, M. R., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.11.034 · Cited by 505
Self-citationWalther, F., Koerver, R., Fuchs, T., Ohno, S., Sann, J., Rohnke, M., Zeier, W. G., & Janek, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00770 · Cited by 433
Self-citationBetz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Schlem, R., Muy, S., Prinz, N., Banik, A., Shao‐Horn, Y., Zobel, M., & Zeier, W. G. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903719 · Cited by 362
Self-citationSanthosha, A. L., Medenbach, L., Buchheim, J. R., & Adelhelm, P. (2019) · Batteries & Supercaps · doi:10.1002/batt.201800149 · Cited by 346
Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900626 · Cited by 342
Self-citationRedox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Self-citationWenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Self-citationHigh-Throughput Screening of Solid-State Li-Ion Conductors Using Lattice-Dynamics Descriptors
Muy, S., Voss, J., Schlem, R., Koerver, R., Sedlmaier, S. J., Maglia, F., Lamp, P., Zeier, W. G., & Shao-Horn, Y. (2019) · iScience · doi:10.1016/j.isci.2019.05.036 · Cited by 262
Self-citationFrom Liquid- to Solid-State Batteries: Ion Transfer Kinetics of Heteroionic Interfaces
Weiss, M., Simon, F. J., Busche, M. R., Nakamura, T., Schröder, D., Richter, F. H., & Janek, J. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00062-7 · Cited by 172
Self-citationCulver, S. P., Koerver, R., Krauskopf, T., & Zeier, W. G. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01293 · Cited by 171
Self-citationWang, C., Liang, J., Jiang, M. Z., Li, X., Mukherjee, S., Adair, K. R., Zheng, M. L., Zhao, Y., Zhao, F., Zhang, S., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105015 · Cited by 147
Lattice Dynamical Approach for Finding the Lithium Superionic Conductor Li 3 ErI 6
Schlem, R., Bernges, T., Li, C., Kraft, M. A., Minafra, N., & Zeier, W. G. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00147 · Cited by 123
Self-citationYu, C., Li, Y., Adair, K. R., Li, W., Goubitz, K., Zhao, Y., Willans, M. J., Thijs, M., Wang, C., Zhao, F., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105097 · Cited by 81
Wang, S., Bai, Q., Nolan, A. M., Liu, Y., Gong, S., Sun, Q., & Mo, Y. (2019) · Angewandte Chemie · doi:10.1002/ange.201901938 · Cited by 60
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Self-citationYang, H., & Wu, N. (2022) · Energy Science & Engineering · doi:10.1002/ese3.1163 · Cited by 586
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
A cost-effective and humidity-tolerant chloride solid electrolyte for lithium batteries
Wang, K., Ren, Q., Gu, Z., Duan, C., Wang, J., Zhu, F., Fu, Y., Hao, J., Zhu, J., He, L., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-24697-2 · Cited by 483
A LaCl3-based lithium superionic conductor compatible with lithium metal
Yin, Y.-C., Yang, J.-T., Luo, J.-D., Lu, G.-X., Huang, Z., Wang, J.-P., Li, P., Li, F., Wu, Y.-C., Tian, T., et al. (2023) · Nature · doi:10.1038/s41586-023-05899-8 · Cited by 458
Metadata
- Authors
- Riegger, L. M., Schlem, R., Sann, J., Zeier, W. G., & Janek, J.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2021-02
- Volume
- 60
- Issue
- 12
- Pages
- 6718-6723
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W3112909335
- Cited by
- 344
- References
- 34
- FWCI
- 10.89
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.