The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Granular Bamboo‐Derived Activated Carbon for High CO2 Adsorption: The Dominant Role of Narrow Micropores
Abstract
Cost‐effective biomass‐derived activated carbons with a high CO 2 adsorption capacity are attractive for carbon capture. Bamboo was found to be a suitable precursor for activated carbon preparation through KOH activation. The bamboo size in the range of 10–200 mesh had little effect on CO 2 adsorption, whereas the KOH/C mass ratio and activation temperature had a significant impact on CO 2 adsorption. The bamboo‐derived activated carbon had a high adsorption capacity and excellent selectivity for CO 2, and also the adsorption process was highly reversible. The adsorbed amount of CO 2 on the granular activated carbon was up to 7.0 mmol g−1 at 273 K and 1 bar, which was higher than almost all carbon materials. The pore characteristics of activated carbons responsible for high CO 2 adsorption were fully investigated. Based on the analysis of narrow micropore size distribution of several activated carbons prepared under different conditions, a more accurate micropore range contributing to CO 2 adsorption was proposed. The volume of micropores in the range of 0.33–0.82 nm had a good linear relationship with CO 2 adsorption at 273 K and 1 bar, and the narrow micropores of about 0.55 nm produced the major contribution, which could be used to evaluate CO 2 adsorption on activated carbons.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Palomino, M., Corma, A., Rey, F., & Valencia, S. (2010) · Langmuir · doi:10.1021/la9026656 · Cited by 289
CO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Cited by
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Li, X., Zhang, L., Yang, Z., Wang, P., Yan, Y., & Ran, J. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116213 · Cited by 1,048
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Biomass derived porous carbon for CO2 capture
Singh, G., Lakhi, K. S., Sil, S., Bhosale, S. V., Kim, I., Albahily, K., & Vinu, A. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.050 · Cited by 555
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Singh, G., Kim, I. Y., Lakhi, K. S., Srivastava, P., Naidu, R., & Vinu, A. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.015 · Cited by 379
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Thomas, P., Lai, C. W., & Bin Johan, M. R. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.03.021 · Cited by 207
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
Self-citationAdeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
A high adsorption capacity bamboo biochar for CO2 capture for low temperature heat utilization
Ji, Y., Zhang, C., Zhang, X. J., Xie, P. F., Wu, C., & Jiang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121131 · Cited by 140
Shi, S., & Liu, Y. (2021) · Fuel · doi:10.1016/j.fuel.2021.121762 · Cited by 136
Gupta, S., Kua, H. W., & Tan Cynthia, S. Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.012 · Cited by 126
Potential of biochar use in building materials
Legan, M., Gotvajn, A. Ž., & Zupan, K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.114704 · Cited by 123
Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon
Rashidi, N. A., Yusup, S., & Hameed, B. H. (2013) · Energy · doi:10.1016/j.energy.2013.08.050 · Cited by 122
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Functional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review
Zhang, Y., Wang, S., Feng, D., Gao, J., Dong, L., Zhao, Y., Sun, S., Huang, Y., & Qin, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c04372 · Cited by 91
Li, D., Tian, Y., Li, L., Li, J., & Zhang, H. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0041-7 · Cited by 67
Nitrogen enriched biochar used as CO2 adsorbents: a brief review
Qiao, Y., & Wu, C. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2021.100018 · Cited by 70
Kamran, U., Rhee, K. Y., Lee, S.-Y., & Park, S.-J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133367 · Cited by 67
Shen, F., Wang, Y., Li, L., Zhang, K., Smith, R. L., & Qi, X. (2018) · Chemical Engineering Communications · doi:10.1080/00986445.2017.1367671 · Cited by 65
Solid‐waste‐Derived carbon dioxide‐capturing materials
Wang, J., Yang, Y., Jia, Q., Shi, Y., Guan, Q., Yang, N., Ning, P., & Wang, Q. (2019) · ChemSusChem · doi:10.1002/cssc.201802655 · Cited by 60
Polyvinyl Chloride‐Derived Carbon Spheres for CO2 Adsorption
Wang, J., Wang, F., Duan, H., Li, Y., Xu, J., Huang, Y., Liu, B., & Zhang, T. (2020) · ChemSusChem · doi:10.1002/cssc.202002230 · Cited by 58
Guo, T., Tian, W., & Wang, Y. (2022) · Atmosphere · doi:10.3390/atmos13071110 · Cited by 32
Zhang, Y., Zhang, P., Yu, W., Wang, J., Deng, Q., Yang, J., Zeng, Z., Xu, M., & Deng, S. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02139 · Cited by 30
Self-citationPark, S., Lee, H.-M., Lee, Y.-S., An, S., Yang, J., & Kim, J. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c02943 · Cited by 11
Metadata
- Authors
- Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2012-11-06
- Volume
- 5
- Issue
- 12
- Pages
- 2354-2360
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2006876915
- Cited by
- 421
- References
- 6
- FWCI
- 26.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
