The DOI matches its Crossref record; 97 of the 97 references it cites were found in a registry or an index.
Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review
Abstract
Three‐dimensional (3D) printing, also called additive manufacturing (AM) or rapid prototyping (RP), is a layer by layer manufacturing method and now has been widely used in many areas such as organ printing, aerospace and industrial design. Now 3D printed microfluidics attract more and more interests for its rapid printing in the lab. In this review, we focused on the advances of 3D printed microfluidic chips especially the use in the chemistry and biology (vascularization and organs on chips). Based on the brief review of different 3D printing methods, we discussed how to choose the suitable 3D printing methods to print the desired microfluidics. We predict that microfluidics will be evolved from 2D chips to 3D cubes, printed hydrogel‐based microfluidics will be reported and widely used, sensors & actuators could be integrated in the microfluidics during printing, and rapid assembling chips with printed microfluidic modules will be popular in the near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The present and future role of microfluidics in biomedical research
Sackmann, E. K., Fulton, A. L., & Beebe, D. J. (2014) · Nature · doi:10.1038/nature13118 · Cited by 2,995
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
From 3D cell culture to organs-on-chips
Huh, D., Hamilton, G. A., & Ingber, D. E. (2011) · Trends in Cell Biology · doi:10.1016/j.tcb.2011.09.005 · Cited by 1,834
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Commercialization of microfluidic point-of-care diagnostic devices
Chin, C. D., Linder, V., & Sia, S. K. (2012) · Lab on a Chip · doi:10.1039/c2lc21204h · Cited by 1,124
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
3D printed microfluidics for biological applications
Ho, C. M. B., Ng, S. H., Li, K. H. H., & Yoon, Y.-J. (2015) · Lab on a Chip · doi:10.1039/c5lc00685f · Cited by 704
Microengineered physiological biomimicry: Organs-on-Chips
Huh, D., Torisawa, Y.-S., Hamilton, G. A., Kim, H. J., & Ingber, D. E. (2012) · Lab on a Chip · doi:10.1039/c2lc40089h · Cited by 667
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Self-citationSood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.04.030 · Cited by 626
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
A review of rapid prototyping technologies and systems
Yan, X., & Gu, P. (1996) · Computer-Aided Design · doi:10.1016/0010-4485(95)00035-6 · Cited by 565
Designable 3D nanofabrication by femtosecond laser direct writing
Zhang, Y.-L., Chen, Q.-D., Xia, H., & Sun, H.-B. (2010) · Nano Today · doi:10.1016/j.nantod.2010.08.007 · Cited by 543
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Cost-Effective Three-Dimensional Printing of Visibly Transparent Microchips within Minutes
Shallan, A. I., Smejkal, P., Corban, M., Guijt, R. M., & Breadmore, M. C. (2014) · Analytical Chemistry · doi:10.1021/ac4041857 · Cited by 501
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Revisiting lab-on-a-chip technology for drug discovery
Neužil, P., Giselbrecht, S., Länge, K., Huang, T. J., & Manz, A. (2012) · Nature Reviews Drug Discovery · doi:10.1038/nrd3799 · Cited by 487
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
Micro-injection moulding of polymer microfluidic devices
Attia, U. M., Marson, S., & Alcock, J. R. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-009-0421-x · Cited by 474
Kasza, K. E., Rowat, A. C., Liu, J., Angelini, T. E., Brangwynne, C. P., Koenderink, G. H., & Weitz, D. A. (2007) · Current Opinion in Cell Biology · doi:10.1016/j.ceb.2006.12.002 · Cited by 445
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
3D printing: the dawn of a new era in manufacturing?
Bogue, R. (2013) · Assembly Automation · doi:10.1108/aa-06-2013-055 · Cited by 371
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri-Fink, A., & Rothen-Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 345
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
3D-printed microfluidic automation
Au, A. K., Bhattacharjee, N., Horowitz, L. F., Chang, T. C., & Folch, A. (2015) · Lab on a Chip · doi:10.1039/c5lc00126a · Cited by 311
Lee, W., Kwon, D., Choi, W., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S. (2015) · Scientific Reports · doi:10.1038/srep07717 · Cited by 300
Hnatovsky, C., Taylor, R. S., Simova, E., Bhardwaj, V. R., Rayner, D. M., & Corkum, P. B. (2005) · Optics Letters · doi:10.1364/ol.30.001867 · Cited by 299
Discrete elements for 3D microfluidics
Bhargava, K. C., Thompson, B., & Malmstadt, N. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414764111 · Cited by 298
3D printed microfluidic devices with integrated valves
Rogers, C. I., Qaderi, K., Woolley, A. T., & Nordin, G. P. (2015) · Biomicrofluidics · doi:10.1063/1.4905840 · Cited by 297
Lee, W., Lee, V., Polio, S., Keegan, P., Lee, J., Fischer, K., Park, J., & Yoo, S. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22613 · Cited by 289
3D printed microfluidic devices with integrated versatile and reusable electrodes
Erkal, J. L., Selimovic, A., Gross, B. C., Lockwood, S. Y., Walton, E. L., McNamara, S., Martin, R. S., & Spence, D. M. (2014) · Lab Chip · doi:10.1039/c4lc00171k · Cited by 287
PDMS lab-on-a-chip fabrication using 3D printed templates
Comina, G., Suska, A., & Filippini, D. (2014) · Lab Chip · doi:10.1039/c3lc50956g · Cited by 278
Prototyping of Microfluidic Devices in Poly(dimethylsiloxane) Using Solid-Object Printing
McDonald, J. C., Chabinyc, M. L., Metallo, S. J., Anderson, J. R., Stroock, A. D., & Whitesides, G. M. (2002) · Analytical Chemistry · doi:10.1021/ac010938q · Cited by 266
Micro lens fabrication by means of femtosecond two photon photopolymerization
Guo, R., Xiao, S., Zhai, X., Li, J., Xia, A., & Huang, W. (2006) · Optics Express · doi:10.1364/opex.14.000810 · Cited by 262
Sugioka, K., Xu, J., Wu, D., Hanada, Y., Wang, Z., Cheng, Y., & Midorikawa, K. (2014) · Lab Chip · doi:10.1039/c4lc00548a · Cited by 259
Chemical regulators have overreached
Hartung, T., & Rovida, C. (2009) · Nature · doi:10.1038/4601080a · Cited by 255
Characterization of printable cellular micro-fluidic channels for tissue engineering
Zhang, Y., Yu, Y., Chen, H., & Ozbolat, I. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025004 · Cited by 246
Chan, H. N., Chen, Y., Shu, Y., Chen, Y., Tian, Q., & Wu, H. (2015) · Microfluidics and Nanofluidics · doi:10.1007/s10404-014-1542-4 · Cited by 244
Fabrication of low cost soft tissue prostheses with the desktop 3D printer
He, Y., Xue, G.-H., & Fu, J.-Z. (2014) · Scientific Reports · doi:10.1038/srep06973 · Cited by 243
Self-citationMicrofluidic single cell analysis: from promise to practice
Lecault, V., White, A. K., Singhal, A., & Hansen, C. L. (2012) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2012.03.022 · Cited by 229
A 3D Printed Fluidic Device that Enables Integrated Features
Anderson, K. B., Lockwood, S. Y., Martin, R. S., & Spence, D. M. (2013) · Analytical Chemistry · doi:10.1021/ac4009594 · Cited by 229
Liao, Y., Song, J., Li, E., Luo, Y., Shen, Y., Chen, D., Cheng, Y., Xu, Z., Sugioka, K., & Midorikawa, K. (2012) · Lab on a Chip · doi:10.1039/c2lc21015k · Cited by 221
Kovarik, M. L., Ornoff, D. M., Melvin, A. T., Dobes, N. C., Wang, Y., Dickinson, A. J., Gach, P. C., Shah, P. K., & Allbritton, N. L. (2013) · Analytical Chemistry · doi:10.1021/ac3031543 · Cited by 218
Organ printing: the future of bone regeneration?
Fedorovich, N. E., Alblas, J., Hennink, W. E., Öner, F. C., & Dhert, W. J. A. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2011.07.001 · Cited by 206
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Kamei, K.-I., Mashimo, Y., Koyama, Y., Fockenberg, C., Nakashima, M., Nakajima, M., Li, J., & Chen, Y. (2015) · Biomedical Microdevices · doi:10.1007/s10544-015-9928-y · Cited by 196
Gowers, S. A. N., Curto, V. F., Seneci, C. A., Wang, C., Anastasova, S., Vadgama, P., Yang, G.-Z., & Boutelle, M. G. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01353 · Cited by 193
Ferguson, B. S., Buchsbaum, S. F., Wu, T.-T., Hsieh, K., Xiao, Y., Sun, R., & Soh, H. T. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203981w · Cited by 192
3D printed molds for non-planar PDMS microfluidic channels
Hwang, Y., Paydar, O. H., & Candler, R. N. (2015) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2015.02.028 · Cited by 187
Kitson, P. J., Symes, M. D., Dragone, V., & Cronin, L. (2013) · Chem. Sci. · doi:10.1039/c3sc51253c · Cited by 180
Design and additive manufacture for flow chemistry
Capel, A. J., Edmondson, S., Christie, S. D. R., Goodridge, R. D., Bibb, R. J., & Thurstans, M. (2013) · Lab on a Chip · doi:10.1039/c3lc50844g · Cited by 176
Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications
O’Neill, P., Azouz, A. B., Vázquez, M., Liu, J., Marczak, S. P., Slouka, Z., Chang, H., Diamond, D., & Brabazon, D. (2014) · Biomicrofluidics · doi:10.1063/1.4898632 · Cited by 174
3D-printed devices for continuous-flow organic chemistry
Dragone, V., Sans, V., Rosnes, M. H., Kitson, P. J., & Cronin, L. (2013) · Beilstein Journal of Organic Chemistry · doi:10.3762/bjoc.9.109 · Cited by 174
Wu, D., Chen, Q.-D., Niu, L.-G., Wang, J.-N., Wang, J., Wang, R., Xia, H., & Sun, H.-B. (2009) · Lab on a Chip · doi:10.1039/b902159k · Cited by 170
Assessment of biocompatibility of 3D printed photopolymers using zebrafish embryo toxicity assays
Macdonald, N. P., Zhu, F., Hall, C. J., Reboud, J., Crosier, P. S., Patton, E. E., Wlodkowic, D., & Cooper, J. M. (2016) · Lab on a Chip · doi:10.1039/c5lc01374g · Cited by 164
3D printed modules for integrated microfluidic devices
Lee, K. G., Park, K. J., Seok, S., Shin, S., Kim, D. H., Park, J. Y., Heo, Y. S., Lee, S. J., & Lee, T. J. (2014) · RSC Adv. · doi:10.1039/c4ra05072j · Cited by 163
Zhao, L., Lee, V. K., Yoo, S.-S., Dai, G., & Intes, X. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.004 · Cited by 161
Collagen-based brain microvasculature modelin vitrousing three-dimensional printed template
Kim, J., Kim, H. N., Im, S.-K., Chung, S. H., Kang, J. Y., & Choi, N. (2015) · Biomicrofluidics · doi:10.1063/1.4917508 · Cited by 155
Combinatorial mixing of microfluidic streams
NEILS, C. M., Tyree, Z., Finlayson, B. A., & Folch, A. (2004) · Lab on a Chip · doi:10.1039/b314962e · Cited by 154
A novel system for fused deposition of advanced multiple ceramics
Jafari, M. A., Han, W., Mohammadi, F., Safari, A., Danforth, S. C., & Langrana, N. A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337047 · Cited by 154
Bishop, G. W., Satterwhite-Warden, J. E., Bhakta, S., Kadimisetty, K., Gillette, K. M., Chen, E., & Rusling, J. F. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b00903 · Cited by 147
Solid freeform fabrication of metal components using fused deposition of metals
Wu, G., Langrana, N. A., Sadanji, R., & Danforth, S. C. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00079-6 · Cited by 144
3D Printed High‐Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale‐Up
Kitson, P. J., Marshall, R. J., Long, D., Forgan, R. S., & Cronin, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402654 · Cited by 137
Asano, H., & Shiraishi, Y. (2015) · Analytica Chimica Acta · doi:10.1016/j.aca.2015.04.014 · Cited by 137
Low cost lab-on-a-chip prototyping with a consumer grade 3D printer
Cómina, G., Suska, A., & Filippini, D. (2014) · Lab on a Chip · doi:10.1039/c4lc00394b · Cited by 136
Liu, A., Xue, G.-H., Sun, M., Shao, H., Ma, C., Gao, Q., Gou, Z., Yan, S., Liu, Y., & He, Y. (2016) · Scientific Reports · doi:10.1038/srep21704 · Cited by 135
Self-citationHanada, Y., Sugioka, K., Shihira‐Ishikawa, I., Kawano, H., Miyawaki, A., & Midorikawa, K. (2011) · Lab on a Chip · doi:10.1039/c1lc20101h · Cited by 123
Ultrarapid Detection of Pathogenic Bacteria Using a 3D Immunomagnetic Flow Assay
Lee, W., Kwon, D., Chung, B., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S. (2014) · Analytical Chemistry · doi:10.1021/ac501436d · Cited by 117
Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering
Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110
Walczak, R., & Adamski, K. (2015) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/25/8/085013 · Cited by 99
3D printed metal columns for capillary liquid chromatography
Sandron, S., Heery, B., Gupta, V., Collins, D. A., Nesterenko, E. P., Nesterenko, P. N., Talebi, M., Beirne, S., Thompson, F., Wallace, G. G., et al. (2014) · The Analyst · doi:10.1039/c4an01476f · Cited by 98
Layered Manufacturing: Current Status and Future Trends
Dutta, D., Prinz, F. B., Rosen, D. W., & Weiss, L. E. (2000) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.1355029 · Cited by 97
Printing 3D microfluidic chips with a 3D sugar printer
He, Y., Qiu, J., Fu, J., Zhang, J., Ren, Y., & Liu, A. (2015) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1571-7 · Cited by 94
Self-citationMonolithic multilayer microfluidics via sacrificial molding of 3D-printed isomalt
Gelber, M. K., & Bhargava, R. (2015) · Lab on a Chip · doi:10.1039/c4lc01392a · Cited by 91
3D-Printed Paper Spray Ionization Cartridge with Fast Wetting and Continuous Solvent Supply Features
Salentijn, G. I., Permentier, H. P., & Verpoorte, E. M. J. (2014) · Analytical Chemistry · doi:10.1021/ac502785j · Cited by 88
Computer aided decision support for fused deposition modeling
Ziemian, C. W., & Crawn, P. M. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395538 · Cited by 83
Characterization of 3D-printed microfluidic chip interconnects with integrated O-rings
Paydar, O. H., Paredes, C. N., Hwang, Y., et al. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.11.005 · Cited by 78
Takenaga, S., Schneider, B., Erbay, E., Biselli, M., Schnitzler, T., Schöning, M. J., & Wagner, T. (2015) · physica status solidi (a) · doi:10.1002/pssa.201532053 · Cited by 72
Fluid and cell behaviors along a 3D printed alginate/gelatin/fibrin channel
Xu, Y., & Wang, X. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25579 · Cited by 66
Donvito, L., Galluccio, L., Lombardo, A., Morabito, G., Nicolosi, A., & Reno, M. (2015) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/25/3/035013 · Cited by 59
3D Printed Unibody Lab-on-a-Chip: Features Survey and Check-Valves Integration
Cómina, G., Suska, A., & Filippini, D. (2015) · Micromachines · doi:10.3390/mi6040437 · Cited by 53
Su, C., Hsia, S.-C., & Sun, Y. (2014) · Analytica Chimica Acta · doi:10.1016/j.aca.2014.06.037 · Cited by 50
A 3D-Printed Oxygen Control Insert for a 24-Well Plate
Brennan, M., Rexius‐Hall, M. L., & Eddington, D. (2015) · PLoS ONE · doi:10.1371/journal.pone.0137631 · Cited by 45
Bártolo, P. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_1 · Cited by 45
A 3D-printed microcapillary assembly for facile double emulsion generation
Martino, C., Berger, S., Wootton, R. C. R., & deMello, A. J. (2014) · Lab on a Chip · doi:10.1039/c4lc00992d · Cited by 41
Su, C., Sun, Y., Tzeng, S., Yang, C., Wang, C., & Yang, M.-H. (2009) · Mass Spectrometry Reviews · doi:10.1002/mas.20240 · Cited by 25
Thompson, D. F. (2014) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c4ja00291a · Cited by 22
Cited by
Fabrication and Applications of Microfluidic Devices: A Review
Niculescu, A.-G., Chircov, C., Bîrcă, A. C., & Grumezescu, A. M. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22042011 · Cited by 678
A Review of Stereolithography: Processes and Systems
Huang, J., Qin, Q., & Wang, J. (2020) · Processes · doi:10.3390/pr8091138 · Cited by 597
Gale, B. K., Jafek, A. R., Lambert, C. J., Goenner, B. L., Moghimifam, H., Nze, U. C., & Kamarapu, S. K. (2018) · Inventions · doi:10.3390/inventions3030060 · Cited by 511
Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels
Gong, H., Bickham, B. P., Woolley, A. T., & Nordin, G. P. (2017) · Lab on a Chip · doi:10.1039/c7lc00644f · Cited by 443
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
Metadata
- Authors
- He, Y., Wu, Y., Fu, J., Gao, Q., & Qiu, J.
- Venue
- Electroanalysis
- Publisher
- Wiley
- Published
- 2016-04-28
- Volume
- 28
- Issue
- 8
- Pages
- 1658-1678
- ISSN
- 1040-0397 (ISSN-L)
- 1521-4109
- OpenAlex
- W2342973494
- Cited by
- 313
- References
- 97
- FWCI
- 13.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.