The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
3D Printing of Polymer Nanocomposites via Stereolithography
Abstract
Additive manufacturing (AM) is still underutilized as an industrial process, but is quickly gaining momentum with the development of innovative techniques and materials for various applications. In particular, stereolithography (SLA) is now shifting from rapid prototyping to rapid manufacturing, but is facing challenges in parts performance and printing speed, among others. This review discusses the application of SLA for polymer nanocomposites fabrication to show the technology's potential in increasing the applicability of current SLA‐printed parts. Photopolymerization chemistry, nanocomposite preparation, and applications in various industries are also explained to provide a comprehensive picture of the current and future capabilities of the technique and materials involved. image
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease
Cappello, V., Marchetti, L., Parlanti, P., Landi, S., Tonazzini, I., Cecchini, M., Piazza, V., & Gemmi, M. (2016) · Scientific Reports · doi:10.1038/s41598-016-0001-8 · Cited by 13,097
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Nanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Jun, Y.-W., Huh, Y.-M., Choi, J.-S., Lee, J.-H., Song, H.-T., Kim, S., Yoon, S., Kim, K.-S., Shin, J.-S., Suh, J.-S., et al. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0422155 · Cited by 1,193
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Photopolymerization kinetics of multifunctional monomers
Andrzejewska, E. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00004-1 · Cited by 944
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Self-citationWickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Self-citationReview of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 496
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
3D Printing in Dentistry—State of the Art
Kessler, A., Hickel, R., & Reymus, M. (2020) · Operative Dentistry · doi:10.2341/18-229-l · Cited by 432
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
Self-citationJaisingh Sheoran, A., & Kumar, H. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2019.11.296 · Cited by 342
Siddique, S. H., Hazell, P. J., Wang, H., Escobedo, J. P., & Ameri, A. A. H. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.103051 · Cited by 339
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
Machine learning for composite materials
Chen, C.-T., & Gu, G. X. (2019) · MRS Communications · doi:10.1557/mrc.2019.32 · Cited by 311
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
Photopolymerization-based additive manufacturing of ceramics: A systematic review
Rasaki, S. A., Xiong, D., Xiong, S., Su, F., Idrees, M., & Chen, Z. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0468-z · Cited by 297
Chaudhary, R. P., Parameswaran, C., Idrees, M., Rasaki, A. S., Liu, C., Chen, Z., & Colombo, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100969 · Cited by 295
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
4D printing materials for vat photopolymerization
Andreu, A., Su, P.-C., Kim, J.-H., Ng, C. S., Kim, S., Kim, I., Lee, J., Noh, J., Subramanian, A. S., & Yoon, Y.-J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102024 · Cited by 181
Karamikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
Soft three-dimensional robots with hard two-dimensional materials
Xu, W., & Gracias, D. H. (2019) · ACS Nano · doi:10.1021/acsnano.9b03051 · Cited by 62
Metadata
- Authors
- Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2017-05-22
- Volume
- 302
- Issue
- 9
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W2618596241
- Cited by
- 565
- References
- 49
- FWCI
- 17.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.