The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Biomedical titanium alloys and their additive manufacturing
Abstract
Titanium and its alloys have been widely used for biomedical applications due to their better biomechanical and biochemical compatibility than other metallic materials such as stainless steels and Co‐based alloys. A brief review on the development of the β‐type titanium alloys with high strength and low elastic modulus is given, and the use of additive manufacturing technologies to produce porous titanium alloy parts, using Ti–6Al–4V as a reference, and its potential in fabricating biomedical replacements are discussed in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Animal models for implant biomaterial research in bone: A review
AO Research Institute, A. F., Pearce, A., Richards, R., Milz, S., Schneider, E., & Pearce, S. (2007) · European Cells and Materials · doi:10.22203/ecm.v013a01 · Cited by 1,289
HUISKES, R., WEINANS, H., & RIETBERGEN, B. V. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00014 · Cited by 1,213
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Berglundh, T., Persson, L., & Klinge, B. (2002) · Journal of Clinical Periodontology · doi:10.1034/j.1600-051x.29.s3.12.x · Cited by 1,086
A systematic review of the 5‐year survival and complication rates of implant‐supported single crowns
Jung, R. E., Pjetursson, B. E., Glauser, R., Zembic, A., Zwahlen, M., & Lang, N. P. (2008) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2007.01453.x · Cited by 1,063
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Comparison of metal release from various metallic biomaterials in vitro
Okazaki, Y., & Gotoh, E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.005 · Cited by 862
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Self-citationLi, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Parametric analysis of the selective laser melting process
Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.02.088 · Cited by 650
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Bacterial Adhesion on Commercially Pure Titanium and Zirconium Oxide Disks: An In Vivo Human Study
Scarano, A., Piattelli, M., Caputi, S., Favero, G. A., & Piattelli, A. (2004) · Journal of Periodontology · doi:10.1902/jop.2004.75.2.292 · Cited by 622
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationDirect laser sintering of metal powders: Mechanism, kinetics and microstructural features
Simchi, A. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.04.117 · Cited by 590
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Titanium and titanium alloys as dental materials.
Lautenschlager, E. P., & Monaghan, P. (1993) · PubMed · Cited by 474
Van Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., & Kruth, J. P. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.045 · Cited by 452
Amin Yavari, S., Ahmadi, S. M., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.12.015 · Cited by 431
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Titanium for prosthodontic applications: a review of the literature.
Wang, R. R., & Fenton, A. H. (1996) · PubMed · Cited by 374
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Self-citationDefect generation and propagation mechanism during additive manufacturing by selective beam melting
Bauereiß, A., Scharowsky, T., & Körner, C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.002 · Cited by 351
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Hrabe, N. W., & Quinn, T. P. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.02.065 · Cited by 349
Helsen, J. A., & Breme, H. (1998) · Medical Entomology and Zoology · Cited by 347
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Rafi, H. K., Starr, T. L., & Stucker, B. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5106-7 · Cited by 335
Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
Li, S. J., Murr, L. E., Cheng, X., Zhang, Z., Hao, Y., Yang, R., Medina, F. R., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.10.051 · Cited by 305
Self-citationWarnke, P. H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S. T., Springer, I. N., Wiltfang, J., & Sivananthan, S. (2009) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2008.0288 · Cited by 305
Facchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Chua, C. K., & Leong, K. F. (2014) · WORLD SCIENTIFIC eBooks · doi:10.1142/9008 · Cited by 261
Karlsson, J., Snis, A., Engqvist, H., & Lausmaa, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.010 · Cited by 254
Cellular Titanium by Selective Electron Beam Melting
Heinl, P., Rottmair, A., Körner, C., & Singer, R. F. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700025 · Cited by 251
3D printing and additive manufacturing : principles and applications
Chua, C. K., & Leong, K. F. (2015) · Cited by 246
Filiaggi, M. J., Coombs, N. A., & Pilliar, R. M. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820251004 · Cited by 245
On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
Panwisawas, C., Qiu, C. L., Sovani, Y., Brooks, J. W., Attallah, M. M., & Basoalto, H. C. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.04.016 · Cited by 228
Zhang, S., Wei, Q., Cheng, L., Li, S., & Shi, Y. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.05.021 · Cited by 219
Self-citationRamirez, D. A., Murr, L. E., Martinez, E., Hernandez, D. H., Martinez, J. L., Machado, B. I., Medina, F., Frigola, P., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.03.033 · Cited by 217
Wu, S., Li, Y., Zhang, Y., Li, X., Yuan, C., Hao, Y., Zhang, Z., & Guo, Z. (2013) · Artificial Organs · doi:10.1111/aor.12153 · Cited by 181
Self-citationIn vivo performance of selective electron beam‐melted Ti‐6Al‐4V structures
Ponader, S., von Wilmowsky, C., Widenmayer, M., Lutz, R., Heinl, P., Körner, C., Singer, R. F., Nkenke, E., Neukam, F. W., & Schlegel, K. A. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32337 · Cited by 179
Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting
Sun, J., Yang, Y., & Wang, D. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.01.038 · Cited by 163
Kanayama, M., Cunningham, B. W., Haggerty, C. J., Abumi, K., Kaneda, K., & McAfee, P. C. (2000) · Journal of Neurosurgery Spine · doi:10.3171/spi.2000.93.2.0259 · Cited by 152
Karpat, Y. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.008 · Cited by 150
Sun, S.-H., Koizumi, Y., Kurosu, S., Li, Y., & Chiba, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.012 · Cited by 145
Crystal structure analysis of M2 high speed steel parts produced by selective laser melting
Liu, Z., Zhang, D. Q., Chua, C. K., & Leong, K. F. (2013) · Materials Characterization · doi:10.1016/j.matchar.2013.07.010 · Cited by 129
Mazzoli, A., Germani, M., & Raffaeli, R. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.11.013 · Cited by 86
Biemond, J., Hannink, G., Verdonschot, N. J. J., & Buma, P. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4836-7 · Cited by 83
Laser additive manufacture of titanium alloys
Wang, M., Lin, X., & Huang, W. (2015) · Materials Technology · doi:10.1179/1753555715y.0000000079 · Cited by 49
Speirs, M., Humbeeck, J. V., Schrooten, J., Luyten, J., & Kruth, J. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.016 · Cited by 44
Cited by
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Nguyen, H. D., Pramanik, A., Basak, A. K., Dong, Y., Prakash, C., Debnath, S., Shankar, S., Jawahir, I. S., Dixit, S., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.04.055 · Cited by 634
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Self-citationSelective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Singla, A. K., Banerjee, M., Sharma, A., Singh, J., Bansal, A., Gupta, M. K., Khanna, N., Shahi, A. S., & Goyal, D. K. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.01.009 · Cited by 383
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Metadata
- Authors
- Hao, Y., Li, S., & Yang, R.
- Venue
- Rare Metals
- Publisher
- Wiley
- Published
- 2016-07-15
- Volume
- 35
- Issue
- 9
- Pages
- 661-671
- ISSN
- 1001-0521 (ISSN-L)
- 1867-7185
- OpenAlex
- W2461581163
- Cited by
- 267
- References
- 74
- FWCI
- 6.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.