The DOI matches its Crossref record; 165 of the 165 references it cites were found in a registry or an index.
Mechanical performance of additively manufactured meta-biomaterials
Abstract
Additive manufacturing (AM) (=3D printing) and rational design techniques have enabled development of meta-biomaterials with unprecedented combinations of mechanical, mass transport, and biological properties. Such meta-biomaterials are usually topologically ordered and are designed by repeating a number of regular unit cells in different directions to create a lattice structure. Establishing accurate topology-property relationships is of critical importance for these materials. In this paper, we specifically focus on AM metallic meta-biomaterials aimed for application as bone substitutes and orthopaedic implants and review the currently available evidence regarding their mechanical performance under quasi-static and cyclic loading conditions. The topology-property relationships are reviewed for regular beam-based lattice structures, sheet-based lattice structures including those based on triply periodic minimal surface, and graded designs. The predictive models used for establishing the topology-property relationships including analytical and computational models are covered as well. Moreover, we present an overview of the effects of the AM processes, material type, tissue regeneration, biodegradation, surface bio-functionalization, post-manufacturing (heat) treatments, and loading profiles on the quasi-static mechanical properties and fatigue behavior of AM meta-biomaterials. AM meta-biomaterials exhibiting unusual mechanical properties such as negative Poisson's ratios (auxetic meta-biomaterials), shape memory behavior, and superelasitcity as well as the potential applications of such unusual behaviors (e.g. deployable implants) are presented too. The paper concludes with some suggestions for future research. STATEMENT OF SIGNIFICANCE: Additive manufacturing enables fabrication of meta-biomaterials with rare combinations of topological, mechanical, and mass transport properties. Given that the micro-scale topological design determines the macro-scale properties of meta-biomaterials, establishing topology-property relationships is the central research question when rationally designing meta-biomaterials. The interest in understanding the relationship between the topological design and material type on the one hand and the mechanical properties and fatigue behavior of meta-biomaterials on the other hand is currently booming. This paper presents and critically evaluates the most important trends and findings in this area with a special focus on the metallic biomaterials used for skeletal applications to enable researchers better understand the current state-of-the-art and to guide the design of future research projects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Controlling sound with acoustic metamaterials
Cummer, S. A., Christensen, J., & Alù, A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.1 · Cited by 2,170
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Auxetic Materials: Functional Materials and Structures from Lateral Thinking!
Evans, K. E., & Alderson, A. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200005)12:9<617::aid-adma617>3.0.co;2-3 · Cited by 1,381
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo
Lloyd, D. G., & Besier, T. F. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00010-1 · Cited by 1,199
Effects of mechanical forces on maintenance and adaptation of form in trabecular bone
Huiskes, R., Ruimerman, R., van Lenthe, G. H., & Janssen, J. D. (2000) · Nature · doi:10.1038/35015116 · Cited by 1,180
Dark acoustic metamaterials as super absorbers for low-frequency sound
Mei, J., Ma, G., Yang, M., Yang, Z., Wen, W., & Sheng, P. (2012) · Nature Communications · doi:10.1038/ncomms1758 · Cited by 1,149
Acoustic cloaking in three dimensions using acoustic metamaterials
Chen, H., & Chan, C. T. (2007) · Applied Physics Letters · doi:10.1063/1.2803315 · Cited by 1,021
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Self-citation3D Soft Metamaterials with Negative Poisson's Ratio
Babaee, S., Shim, J., Weaver, J. C., Chen, E. R., Patel, N., & Bertoldi, K. (2013) · Advanced Materials · doi:10.1002/adma.201301986 · Cited by 856
Auxetic mechanical metamaterials
Kolken, H. M. A., & Zadpoor, A. A. (2017) · RSC Advances · doi:10.1039/c6ra27333e · Cited by 788
Self-citationVan Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
Aseptic loosening, not only a question of wear: A review of different theories
Sundfeldt, M., V Carlsson, L., B Johansson, C., Thomsen, P., & Gretzer, C. (2006) · Acta Orthopaedica · doi:10.1080/17453670610045902 · Cited by 622
Three-dimensional broadband omnidirectional acoustic ground cloak
Zigoneanu, L., Popa, B.-I., & Cummer, S. A. (2014) · Nature Materials · doi:10.1038/nmat3901 · Cited by 617
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572
Micro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
The effect of geometry on three-dimensional tissue growth
Rumpler, M., Woesz, A., Dunlop, J. W. C., van Dongen, J. T., & Fratzl, P. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0064 · Cited by 531
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
Mechanical metamaterials with negative compressibility transitions
Nicolaou, Z. G., & Motter, A. E. (2012) · Nature Materials · doi:10.1038/nmat3331 · Cited by 522
Bone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518
Self-citationLiu, L., Kamm, P., García-Moreno, F., Banhart, J., & Pasini, D. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.07.003 · Cited by 513
Zadpoor, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00065g · Cited by 492
Self-citationLightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Self-citationAn overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Mechanical signals as anabolic agents in bone
Ozcivici, E., Luu, Y. K., Adler, B., Qin, Y.-X., Rubin, J., Judex, S., & Rubin, C. T. (2010) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2009.239 · Cited by 441
Amin Yavari, S., Ahmadi, S. M., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.12.015 · Cited by 431
Self-citationAdditively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
Self-citationScaffold Design and Manufacturing: From Concept to Clinic
Hollister, S. J. (2009) · Advanced Materials · doi:10.1002/adma.200802977 · Cited by 408
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Self-citationAhmadi, S., Yavari, S., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. (2015) · Materials · doi:10.3390/ma8041871 · Cited by 399
Self-citationAdditively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Self-citationEvaluation of topology-optimized lattice structures manufactured via selective laser melting
Xiao, Z., Yang, Y., Xiao, R., Bai, Y., Song, C., & Wang, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.023 · Cited by 380
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 376
Self-citationRationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
Kolken, H. M. A., Janbaz, S., Leeflang, S. M. A., Lietaert, K., Weinans, H. H., & Zadpoor, A. A. (2018) · Materials Horizons · doi:10.1039/c7mh00699c · Cited by 374
Self-citationLiu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Rational design of reconfigurable prismatic architected materials
Overvelde, J. T. B., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2017) · Nature · doi:10.1038/nature20824 · Cited by 362
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Mechanical and textural properties of pelvic trabecular bone
Dalstra, M., Huiskes, R., Odgaard, A., & van Erning, L. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90014-6 · Cited by 358
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Self-citationGeometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Bidan, C. M., Kommareddy, K. P., Rumpler, M., Kollmannsberger, P., Fratzl, P., & Dunlop, J. W. C. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200159 · Cited by 341
Wear particles, periprosthetic osteolysis and the immune system
Goodman, S. B. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.035 · Cited by 340
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Dong, G., Tang, Y., & Zhao, Y. F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037305 · Cited by 337
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Self-citationVan Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
Li, S. J., Murr, L. E., Cheng, X., Zhang, Z., Hao, Y., Yang, R., Medina, F. R., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.10.051 · Cited by 305
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Self-citationVibrant times for mechanical metamaterials
Christensen, J., Kadic, M., Wegener, M., Kraft, O., & Wegener, M. (2015) · MRS Communications · doi:10.1557/mrc.2015.51 · Cited by 298
Porous scaffold design using the distance field and triply periodic minimal surface models
Yoo, D. J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.019 · Cited by 298
Bone regeneration performance of surface-treated porous titanium
Amin Yavari, S., van der Stok, J., Chai, Y. C., Wauthle, R., Tahmasebi Birgani, Z., Habibovic, P., Mulier, M., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.054 · Cited by 297
Self-citationBenedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Bobbert, F. S. L., & Zadpoor, A. A. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00741h · Cited by 296
Self-citationWu, S., Lu, Y., Gan, Y. L., Huang, T., Zhao, C. Q., Lin, J., Guo, S., & Lin, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.02.183 · Cited by 292
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Karamooz Ravari, M. R., Kadkhodaei, M., Badrossamay, M., & Rezaei, R. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2014.08.009 · Cited by 281
Design of graded lattice structure with optimized mesostructures for additive manufacturing
Wang, Y., Zhang, L., Daynes, S., Zhang, H., Feih, S., & Wang, M. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.011 · Cited by 276
Zhang, X.-Y., Fang, G., Leeflang, S., Böttger, A. J., A. Zadpoor, A., & Zhou, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.263 · Cited by 274
Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces
Yoo, D.-J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0008-9 · Cited by 271
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Designable dual-material auxetic metamaterials using three-dimensional printing
Wang, K., Chang, Y.-H., Chen, Y., Zhang, C., & Wang, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.033 · Cited by 268
Tang, Y., & Yin, J. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.07.005 · Cited by 267
Speirs, M., Van Hooreweder, B., Van Humbeeck, J., & Kruth, J.-P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.016 · Cited by 267
Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., & Misra, R. D. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.01.034 · Cited by 262
Isotropic Negative Thermal Expansion Metamaterials
Wu, L., Li, B., & Zhou, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05717 · Cited by 256
Programming the shape-shifting of flat soft matter
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.08.026 · Cited by 252
Self-citationYánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Cellular Titanium by Selective Electron Beam Melting
Heinl, P., Rottmair, A., Körner, C., & Singer, R. F. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700025 · Cited by 251
Multiscale isogeometric topology optimization for lattice materials
Wang, Y., Xu, H., & Pasini, D. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.08.015 · Cited by 250
Benedetti, M., Torresani, E., Leoni, M., Fontanari, V., Bandini, M., Pederzolli, C., & Potrich, C. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.03.024 · Cited by 248
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Truscello, S., Kerckhofs, G., Bael, S. V., Pyka, G., Schrooten, J., & Oosterwyck, H. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.021 · Cited by 229
Limmahakhun, S., Oloyede, A., Sitthiseripratip, K., Xiao, Y., & Yan, C. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.11.090 · Cited by 229
How Linear Tension Converts to Curvature: Geometric Control of Bone Tissue Growth
Bidan, C. M., Kommareddy, K. P., Rumpler, M., Kollmannsberger, P., Bréchet, Y. J. M., Fratzl, P., & Dunlop, J. W. C. (2012) · PLoS ONE · doi:10.1371/journal.pone.0036336 · Cited by 221
Average patient walking activity approaches 2 million cycles per year
Silva, M., Shepherd, E. F., Jackson, W. O., Dorey, F. J., & Schmalzried, T. P. (2002) · The Journal of Arthroplasty · doi:10.1054/arth.2002.32699 · Cited by 220
van Hengel, I. A. J., Riool, M., Fratila-Apachitei, L. E., Witte-Bouma, J., Farrell, E., Zadpoor, A. A., Zaat, S. A. J., & Apachitei, I. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.030 · Cited by 216
Self-citationAhmadi, S. M., Hedayati, R., Li, Y., Lietaert, K., Tümer, N., Fatemi, A., Rans, C. D., Pouran, B., Weinans, H., & Zadpoor, A. A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.014 · Cited by 210
Self-citationThe biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting
Habijan, T., Haberland, C., Meier, H., Frenzel, J., Wittsiepe, J., Wuwer, C., Greulich, C., Schildhauer, T. A., & Köller, M. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.09.008 · Cited by 206
Compression‐compression fatigue of selective electron beam melted cellular titanium (Ti‐6Al‐4V)
Hrabe, N. W., Heinl, P., Flinn, B., Körner, C., & Bordia, R. K. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31901 · Cited by 203
Lin, C., Wirtz, T., LaMarca, F., & Hollister, S. J. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31231 · Cited by 198
Estimation of Muscle Forces and Joint Moments Using a Forward-Inverse Dynamics Model
BUCHANAN, T. S., LLOYD, D. G., MANAL, K., & BESIER, T. F. (2005) · Medicine & Science in Sports & Exercise · doi:10.1249/01.mss.0000176684.24008.6f · Cited by 197
Revell, P. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0142 · Cited by 197
Arabnejad Khanoki, S., & Pasini, D. (2012) · Journal of Biomechanical Engineering · doi:10.1115/1.4006115 · Cited by 192
Negative Poisson’s ratios in tendons: An unexpected mechanical response
Gatt, R., Vella Wood, M., Gatt, A., Zarb, F., Formosa, C., Azzopardi, K. M., Casha, A., Agius, T. P., Schembri-Wismayer, P., Attard, L., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.018 · Cited by 184
Dallago, M., Fontanari, V., Torresani, E., Leoni, M., Pederzolli, C., Potrich, C., & Benedetti, M. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.11.044 · Cited by 182
Zadpoor, A. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18081607 · Cited by 172
Self-citationOnal, E., Frith, J., Jurg, M., Wu, X., & Molotnikov, A. (2018) · Metals · doi:10.3390/met8040200 · Cited by 172
Weißmann, V., Bader, R., Hansmann, H., & Laufer, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.095 · Cited by 170
Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
Wauthle, R., Ahmadi, S. M., Amin Yavari, S., Mulier, M., Zadpoor, A. A., Weinans, H., Van Humbeeck, J., Kruth, J.-P., & Schrooten, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.05.001 · Cited by 163
Self-citationYavari, S. A., Loozen, L. D., Paganelli, F. L., Bakhshandeh, S., Lietaert, K., Groot, J. A., Fluit, A. C., Boel, C. H. E., Alblas, J., Vogely, H. C., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03152 · Cited by 158
Self-citationAdditively manufactured metallic pentamode meta-materials
Hedayati, R., Leeflang, A. M., & ZADPOOR, A. A. (2017) · Applied Physics Letters · doi:10.1063/1.4977561 · Cited by 145
Self-citationFatigue behavior and cyclic deformation of additive manufactured NiTi
Bagheri, A., Mahtabi, M. J., & Shamsaei, N. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.10.006 · Cited by 145
Murr, L. E. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.02.019 · Cited by 138
Zargarian, A., Esfahanian, M., Kadkhodapour, J., & Ziaei‐Rad, S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.054 · Cited by 136
Hedayati, R., Hosseini‐Toudeshky, H., Sadighi, M., Aghdam, M. M., & ZADPOOR, A. A. (2015) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.11.017 · Cited by 135
Self-citationZADPOOR, A. A., & Hedayati, R. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35855 · Cited by 133
Self-citationHedayati, R., Sadighi, M., Aghdam, M. M., et al. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.001 · Cited by 132
Ahmadi, S. M., Kumar, R., Borisov, E. V., Petrov, R., Leeflang, M. A., Li, Y., Tümer, N., Huizenga, R. M., Ayas, C., ZADPOOR, A. A., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.043 · Cited by 132
Self-citationShape-matching soft mechanical metamaterials
Mirzaali, M. J., Janbaz, S., Strano, M., Vergani, L. M., & ZADPOOR, A. A. (2018) · Scientific Reports · doi:10.1038/s41598-018-19381-3 · Cited by 130
Self-citationLietaert, K., Cutolo, A., Boey, D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-23414-2 · Cited by 126
Negative linear compressibility of hexagonal honeycombs and related systems
Grima, J. N., Attard, D., Caruana‐Gauci, R., & Gatt, R. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.06.011 · Cited by 121
Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
Brandl, E., & Greitemeier, D. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.04.116 · Cited by 121
Surface curvatures of trabecular bone microarchitecture
Jinnai, H., Watashiba, H., Kajihara, T., Nishikawa, Y., Takahashi, M., & Ito, M. (2002) · Bone · doi:10.1016/s8756-3282(01)00672-x · Cited by 118
Jiayun, X., Chen, X., Zhang, C., Liu, Y., Wang, J., & Deng, F. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.096 · Cited by 111
Hedayati, R., Ahmadi, S. M., Lietaert, K., et al. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.12.029 · Cited by 109
van der Stok, J., Wang, H., Yavari, S. A., Siebelt, M., Sandker, M., Waarsing, J. H., Verhaar, J. A. N., Jahr, H., ZADPOOR, A. A., Leeuwenburgh, S. C. G., et al. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0181 · Cited by 101
Self-citationNeural network prediction of load from the morphology of trabecular bone
ZADPOOR, A. A., Campoli, G., & Weinans, H. (2012) · Applied Mathematical Modelling · doi:10.1016/j.apm.2012.10.049 · Cited by 99
Self-citationAdditively Manufactured and Surface Biofunctionalized Porous Nitinol
Karaji, Z. G., Speirs, M., Dadbakhsh, S., Kruth, J., Weinans, H., ZADPOOR, A. A., & Yavari, S. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14026 · Cited by 99
Self-citationBakhshandeh, S., Karaji, Z. G., Lietaert, K., Fluit, A. C., Boel, C. H. E., Vogely, H. C., Vermonden, T., Hennink, W. E., Weinans, H., ZADPOOR, A. A., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04950 · Cited by 98
Self-citationMechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell
Hedayati, R., Sadighi, M., Aghdam, M. M., et al. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.07.013 · Cited by 94
Mechanics of additively manufactured biomaterials
ZADPOOR, A. A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.03.018 · Cited by 94
Self-citationKaramooz-Ravari, M. R., Esfahani, S. N., Andani, M. T., Kadkhodaei, M., Ghaei, A., Karaca, H. E., & Elahinia, M. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/2/025008 · Cited by 92
Hedayati, R., Sadighi, M., Aghdam, M. M., et al. (2015) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2015.11.033 · Cited by 90
Additive Manufacturing of Shape Memory Alloys
Humbeeck, J. V. (2018) · Shape Memory and Superelasticity · doi:10.1007/s40830-018-0174-z · Cited by 89
A three-dimensional model for tissue deposition on complex surfaces
Bidan, C. M., Wang, F. M., & Dunlop, J. (2013) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2013.774384 · Cited by 87
Room Ee1614, P. B. 2., van der Stok, J., Koolen, M. K. E., de Maat, M. P. M., Yavari, S. A., Alblas, J., Patka, P., Verhaar, J. A. N., van Lieshout, E., ZADPOOR, A. A., et al. (2015) · European Cells and Materials · doi:10.22203/ecm.v029a11 · Cited by 86
Self-citationHedayati, R., Janbaz, S., Sadighi, M., Aghdam, M. M., & ZADPOOR, A. A. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.10.003 · Cited by 86
Self-citationHooreweder, B. V., Lietaert, K., Neirinck, B., Lippiatt, N. R., & Wevers, M. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.03.017 · Cited by 86
Yavari, S. A., Wauthle, R., Böttger, A., Schrooten, J., Weinans, H., & ZADPOOR, A. A. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.11.069 · Cited by 79
Self-citationYan, Y., Li, Y., Song, L., Zeng, C., & Li, Y. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.11.025 · Cited by 79
Computational load estimation of the femur
Campoli, G., Weinans, H., & ZADPOOR, A. A. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.02.011 · Cited by 75
Self-citationTowards deployable meta-implants
Bobbert, F. S. L., Janbaz, S., & ZADPOOR, A. A. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00576a · Cited by 75
Self-citationde Krijger, J., Rans, C. D., Hooreweder, B. V., Lietaert, K., Pouran, B., & ZADPOOR, A. A. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.11.022 · Cited by 74
Self-citationCutolo, A., Neirinck, B., Lietaert, K., de Formanoir, C., & Hooreweder, B. V. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.008 · Cited by 72
Lipiński, P., Barbas, A., & Bonnet, A.-S. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.08.011 · Cited by 68
Rahimizadeh, A., Nourmohammadi, Z., Arabnejad, S., Tänzer, M., & Pasini, D. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.11.041 · Cited by 64
GÖRGÜLÜARSLAN, R. M., Choi, S.-K., & Saldaña, C. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.04.011 · Cited by 60
Li, Z., Liu, C., Wang, B., Wang, C., Wang, Z., Yang, F., Gao, C., Liu, H., Qin, Y., & Wang, J. (2018) · RSC Advances · doi:10.1039/c7ra13313h · Cited by 59
Open forward and inverse problems in theoretical modeling of bone tissue adaptation
ZADPOOR, A. A. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.05.017 · Cited by 58
Self-citationTopological Similarity of Sponge-like Bicontinuous Morphologies Differing in Length Scale
Jinnai, H., Nishikawa, Y., Ito, M., Smith, S. D., Agard, D. A., & Spontak, R. J. (2002) · Advanced Materials · Cited by 58
Surface and mechanical properties of modified porous titanium scaffold
Khodaei, M., Valanezhad, A., Watanabe, I., & Yousefi, R. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.02.032 · Cited by 55
Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials
Hedayati, R., Hosseini‐Toudeshky, H., Sadighi, M., Aghdam, M. M., & ZADPOOR, A. A. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.05.006 · Cited by 54
Self-citationGeng, H., Poologasundarampillai, G., Todd, N. M., Devlin‐Mullin, A., Moore, K. L., Golrokhi, Z., Gilchrist, J. B., Jones, E., Potter, R. J., Sutcliffe, C. J., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05150 · Cited by 52
Xiao, D., Yang, Y., Su, X., Wang, D., & Sun, J. (2013) · Bio-Medical Materials and Engineering · doi:10.3233/bme-130765 · Cited by 51
Yuan, W., Hou, W., Li, S., Hao, Y., Yang, R., Zhang, L., & Zhu, Y. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.12.003 · Cited by 46
Genovese, K., Leeflang, M. A., & ZADPOOR, A. A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.010 · Cited by 42
Self-citationYavari, S. A., van der Stok, J., Ahmadi, S. M., Wauthle, R., Schrooten, J., Weinans, H., & ZADPOOR, A. A. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.05.006 · Cited by 38
Self-citationMohammed, M. I., & Gibson, I. (2018) · Journal of Mechanical Design · doi:10.1115/1.4040164 · Cited by 38
van der Stok, J., Lozano, D., Chai, Y. C., Yavari, S. A., Bastidas‐Coral, A. P., Verhaar, J. A. N., Gómez‐Barrena, E., Schrooten, J., Jahr, H., ZADPOOR, A. A., et al. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0476 · Cited by 36
Self-citationCho, H., Cho, Y., & Han, H. N. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.003 · Cited by 31
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Metadata
- Authors
- Zadpoor, A. A.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 85
- Pages
- 41-59
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2906013146
- Cited by
- 429
- References
- 165
- FWCI
- 17.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.