The DOI matches its Crossref record; 183 of the 183 references it cites were found in a registry or an index.
Additive manufacturing of metamaterials: A review
Abstract
Abstract Metamaterials exhibit properties beyond those exhibited by conventional materials in conventional scenarios. These have been investigated both theoretically and experimentally at length. In many cases the underpinning physical understanding of metamaterials has greatly preceded our ability to manufacture constituent structures. However, the development of additive manufacturing techniques gives new possibilities for the fabrication of complex metamaterial structures, many of which cannot be realised through conventional fabrication methods. The literature to date contains contributions from a diverse group of researchers from the physical sciences, mathematics, and manufacturing technology in the creation of metamaterials for electromagnetic, acoustic and mechanical applications. It is proposed that additive manufacturing holds the key to realise the capabilities of this vibrant research community and permit the creation of new paradigms in fundamental structures but also exploitation through application. For this purpose, a literature review is presented which identifies key advances in metamaterials alongside additive manufacturing and proposes new opportunities for researchers to work together through intra/inter disciplinary research to realise structures which exhibit extraordinary behaviour(s). This review represents a comprehensive account of the state-of-the-art in the production of such metamaterials using additive manufacturing methods and highlights areas, which, based on trends observed in the literature, are worthy of further research and require a coordinated effort on behalf of the afore mentioned disciplines in order to advance the state-of-the-art.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Negative Refraction Makes a Perfect Lens
Pendry, J. B. (2000) · Physical Review Letters · doi:10.1103/physrevlett.85.3966 · Cited by 12,159
THE ELECTRODYNAMICS OF SUBSTANCES WITH SIMULTANEOUSLY NEGATIVE VALUES OF $\epsilon$ AND μ
Veselago, V. G. (1968) · Soviet Physics Uspekhi · doi:10.1070/pu1968v010n04abeh003699 · Cited by 11,152
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Composite Medium with Simultaneously Negative Permeability and Permittivity
Smith, D. R., Padilla, W. J., Vier, D. C., Nemat-Nasser, S. C., & Schultz, S. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.4184 · Cited by 8,831
Photonic crystals: putting a new twist on light
Joannopoulos, J. D., Villeneuve, P. R., & Fan, S. (1997) · Nature · doi:10.1038/386143a0 · Cited by 3,137
Smith, D. R., Schultz, S., Markoš, P., & Soukoulis, C. M. (2002) · Physical Review B · doi:10.1103/physrevb.65.195104 · Cited by 2,963
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Gansel, J. K., Thiel, M., Rill, M. S., Decker, M., Bade, K., Saile, V., von Freymann, G., Linden, S., & Wegener, M. (2009) · Science · doi:10.1126/science.1177031 · Cited by 2,694
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Poisson's ratio and modern materials
Greaves, G. N., Greer, A. L., Lakes, R. S., & Rouxel, T. (2011) · Nature Materials · doi:10.1038/nmat3134 · Cited by 2,362
Three-dimensional optical metamaterial with a negative refractive index
Valentine, J., Zhang, S., Zentgraf, T., Ulin-Avila, E., Genov, D. A., Bartal, G., & Zhang, X. (2008) · Nature · doi:10.1038/nature07247 · Cited by 2,309
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
Cumpston, B. H., Ananthavel, S. P., Barlow, S., Dyer, D. L., Ehrlich, J. E., Erskine, L. L., Heikal, A. A., Kuebler, S. M., Lee, I.-Y. S., McCord-Maughon, D., et al. (1999) · Nature · doi:10.1038/17989 · Cited by 2,232
Robust method to retrieve the constitutive effective parameters of metamaterials
Chen, X., Grzegorczyk, T. M., Wu, B.-I., Pacheco, J., & Kong, J. A. (2004) · Physical Review E · doi:10.1103/physreve.70.016608 · Cited by 2,214
Controlling sound with acoustic metamaterials
Cummer, S. A., Christensen, J., & Alù, A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.1 · Cited by 2,170
Jahani, S., & Jacob, Z. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.304 · Cited by 1,965
Flexible mechanical metamaterials
Bertoldi, K., Vitelli, V., Christensen, J., & van Hecke, M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.66 · Cited by 1,867
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Negative index of refraction in optical metamaterials
Shalaev, V. M., Cai, W., Chettiar, U. K., Yuan, H.-K., Sarychev, A. K., Drachev, V. P., & Kildishev, A. V. (2005) · Optics Letters · doi:10.1364/ol.30.003356 · Cited by 1,659
Acoustic metamaterials: From local resonances to broad horizons
Ma, G., & Sheng, P. (2016) · Science Advances · doi:10.1126/sciadv.1501595 · Cited by 1,595
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Photonic band structure: The face-centered-cubic case employing nonspherical atoms
Yablonovitch, E., Gmitter, T., & Leung, K. (1991) · Physical Review Letters · doi:10.1103/physrevlett.67.2295 · Cited by 1,476
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Metamaterials: Physics and Engineering Explorations
Engheta, N., & Ziolkowski, R. W. (2006) · SDÜ Bilgi Merkezi · Cited by 1,255
VII. Colours in metal glasses, in metallic films, and in metallic solutions.—II
Garnett, J. C. M. (1906) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1906.0007 · Cited by 1,246
Full Three-Dimensional Photonic Bandgap Crystals at Near-Infrared Wavelengths
Noda, S., Tomoda, K., Yamamoto, N., & Chutinan, A. (2000) · Science · doi:10.1126/science.289.5479.604 · Cited by 1,116
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Three-dimensional mechanical metamaterials with a twist
Frenzel, T., Kadic, M., & Wegener, M. (2017) · Science · doi:10.1126/science.aao4640 · Cited by 1,103
Metamaterials: a new frontier of science and technology
Liu, Y., & Zhang, X. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00184h · Cited by 1,086
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Self-citationWave propagation in media having negative permittivity and permeability
Ziolkowski, R. W., & Heyman, E. (2001) · Physical Review E · doi:10.1103/physreve.64.056625 · Cited by 1,027
Extreme Acoustic Metamaterial by Coiling Up Space
Liang, Z., & Li, J. (2012) · Physical Review Letters · doi:10.1103/physrevlett.108.114301 · Cited by 930
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Auxetic mechanical metamaterials
Kolken, H. M. A., & Zadpoor, A. A. (2017) · RSC Advances · doi:10.1039/c6ra27333e · Cited by 788
Optical Metamaterials: Fundamentals and Applications
Cai, W., & Shalaev, V. (2010) · doi:10.1007/978-1-4419-1151-3 · Cited by 758
Resilient 3D hierarchical architected metamaterials
Meza, L. R., Zelhofer, A. J., Clarke, N., Mateos, A. J., Kochmann, D. M., & Greer, J. R. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509120112 · Cited by 706
Approaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., & Kraft, O. (2016) · Nature Materials · doi:10.1038/nmat4561 · Cited by 689
Experimental Demonstration of Guiding and Bending of Electromagnetic Waves in a Photonic Crystal
Lin, S.-Y., Chow, E., Hietala, V., Villeneuve, P. R., & Joannopoulos, J. D. (1998) · Science · doi:10.1126/science.282.5387.274 · Cited by 686
Phononic crystals and acoustic metamaterials
Lu, M.-H., Feng, L., & Chen, Y.-F. (2009) · Materials Today · doi:10.1016/s1369-7021(09)70315-3 · Cited by 673
A holey-structured metamaterial for acoustic deep-subwavelength imaging
Zhu, J., Christensen, J., Jung, J., Martin-Moreno, L., Yin, X., Fok, L., Zhang, X., & Garcia-Vidal, F. J. (2011) · Nature Physics · doi:10.1038/nphys1804 · Cited by 668
Tailored 3D Mechanical Metamaterials Made by Dip‐in Direct‐Laser‐Writing Optical Lithography
Bückmann, T., Stenger, N., Kadic, M., Kaschke, J., Frölich, A., Kennerknecht, T., Eberl, C., Thiel, M., & Wegener, M. (2012) · Advanced Materials · doi:10.1002/adma.201200584 · Cited by 665
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Focusing of Sound in a 3D Phononic Crystal
Yang, S., Page, J. H., Liu, Z., Cowan, M. L., Chan, C. T., & Sheng, P. (2004) · Physical Review Letters · doi:10.1103/physrevlett.93.024301 · Cited by 653
Three Decades of Auxetics Research − Materials with Negative Poisson's Ratio: A Review
Saxena, K. K., Das, R. K., & Calius, E. P. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600053 · Cited by 639
An elasto-mechanical unfeelability cloak made of pentamode metamaterials
Bückmann, T., Thiel, M., Kadic, M., Schittny, R., & Wegener, M. (2014) · Nature Communications · doi:10.1038/ncomms5130 · Cited by 623
Sound Absorption Structures: From Porous Media to Acoustic Metamaterials
Yang, M., & Sheng, P. (2017) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070616-124032 · Cited by 616
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
LaFratta, C. N., Fourkas, J. T., Baldacchini, T., & Farrer, R. A. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603995 · Cited by 589
High-strength cellular ceramic composites with 3D microarchitecture
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1315147111 · Cited by 563
Micro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
Iterative Training of Dynamic Skills Inspired by Human Coaching Techniques
Ha, S., & Liu, C. K. (2014) · ACM Transactions on Graphics · doi:10.1145/2682626 · Cited by 535
Method for retrieving effective properties of locally resonant acoustic metamaterials
Fokin, V., Ambati, M., Sun, C., & Zhang, X. (2007) · Physical Review B · doi:10.1103/physrevb.76.144302 · Cited by 510
Zadpoor, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00065g · Cited by 492
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Composite 3D-printed metastructures for low-frequency and broadband vibration absorption
Matlack, K. H., Bauhofer, A. A., Krödel, S., Palermo, A., & Daraio, C. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600171113 · Cited by 480
Negative refraction of acoustic waves in two-dimensional phononic crystals
Zhang, X., & Liu, Z. (2004) · Applied Physics Letters · doi:10.1063/1.1772854 · Cited by 479
Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs
Rafsanjani, A., & Pasini, D. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.001 · Cited by 476
Advances in 3D nano/microfabrication using two-photon initiated polymerization
Lee, K.-S., Kim, R. H., Yang, D.-Y., & Park, S. H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.01.001 · Cited by 475
Snapping Mechanical Metamaterials under Tension
Rafsanjani, A., Akbarzadeh, A., & Pasini, D. (2015) · Advanced Materials · doi:10.1002/adma.201502809 · Cited by 459
Amin Yavari, S., Ahmadi, S. M., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.12.015 · Cited by 431
Cui, Y., Liu, Z., Li, Y., Zhou, F., Chen, H., & Lin, Y. (2018) · Scientific Reports · doi:10.1038/srep46937 · Cited by 418
Forests as a natural seismic metamaterial: Rayleigh wave bandgaps induced by local resonances
Colombi, A., Roux, P., Guenneau, S., Gueguen, P., & Craster, R. V. (2016) · Scientific Reports · doi:10.1038/srep19238 · Cited by 416
Recent progress in multiphoton microfabrication
Maruo, S., & Fourkas, J. T. (2008) · Laser & Photonics Reviews · doi:10.1002/lpor.200710039 · Cited by 390
High refractive index organic–inorganic nanocomposites: design, synthesis and application
Lü, C., & Yang, B. (2009) · Journal of Materials Chemistry · doi:10.1039/b816254a · Cited by 383
Photonic metamaterials by direct laser writing and silver chemical vapour deposition
Rill, M. S., Plet, C., Thiel, M., Staude, I., von Freymann, G., Linden, S., & Wegener, M. (2008) · Nature Materials · doi:10.1038/nmat2197 · Cited by 372
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
Photonic Crystals: Semiconductors of Light
Yablonovitch, E. (2001) · Scientific American · doi:10.1038/scientificamerican1201-46 · Cited by 362
Anomalous refraction of airborne sound through ultrathin metasurfaces
Tang, K., Qiu, C., Ke, M., Lu, J., Ye, Y., & Liu, Z. (2014) · Scientific Reports · doi:10.1038/srep06517 · Cited by 360
Design of manufacturable 3D extremal elastic microstructure
Andreassen, E., Lazarov, B. S., & Sigmund, O. (2014) · Mechanics of Materials · doi:10.1016/j.mechmat.2013.09.018 · Cited by 340
Two‐Component Polymer Scaffolds for Controlled Three‐Dimensional Cell Culture
Klein, F., Richter, B., Striebel, T., Franz, C. M., Freymann, G. V., Wegener, M., & Bastmeyer, M. (2011) · Advanced Materials · doi:10.1002/adma.201004060 · Cited by 334
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Pure and doped boron nitride nanotubes
Terrones, M., Romo-Herrera, J. M., Cruz-Silva, E., López-Urías, F., Muñoz-Sandoval, E., Velázquez-Salazar, J. J., Terrones, H., Bando, Y., & Golberg, D. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70077-9 · Cited by 313
Zhu, X., Li, K., Zhang, P., Zhu, J., Zhang, J., Tian, C., & Liu, S. (2016) · Nature Communications · doi:10.1038/ncomms11731 · Cited by 310
Serbin, J., Ovsianikov, A., & Chichkov, B. (2004) · Optics Express · doi:10.1364/opex.12.005221 · Cited by 305
Fabrication of optical negative-index metamaterials: Recent advances and outlook
Boltasseva, A., & Shalaev, V. M. (2008) · Metamaterials · doi:10.1016/j.metmat.2008.03.004 · Cited by 297
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
3D printing of multiple metallic materials via modified selective laser melting
Wei, C., Li, L., Zhang, X., & Chueh, Y.-H. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.096 · Cited by 286
Toward an enhanced understanding and implementation of photopolymerization reactions
Bowman, C. N., & Kloxin, C. J. (2008) · AIChE Journal · doi:10.1002/aic.11678 · Cited by 280
Vogiatzis, P., Chen, S., Wang, X., Li, T., & Wang, L. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.09.009 · Cited by 275
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Designable dual-material auxetic metamaterials using three-dimensional printing
Wang, K., Chang, Y.-H., Chen, Y., Zhang, C., & Wang, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.033 · Cited by 268
Tanaka, T., Ishikawa, A., & Kawata, S. (2006) · Applied Physics Letters · doi:10.1063/1.2177636 · Cited by 263
Myint, K., Biswas, R., Li, Y., Jong, N., Jamieson, S., Liu, J., Han, C., Squire, C., Merien, F., Lu, J., et al. (2019) · Scientific Reports · doi:10.1038/s41598-019-38667-8 · Cited by 262
Metamaterial bricks and quantization of meta-surfaces
Memoli, G., Caleap, M., Asakawa, M., Sahoo, D. R., Drinkwater, B. W., & Subramanian, S. (2017) · Nature Communications · doi:10.1038/ncomms14608 · Cited by 256
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Nagarajan, B., Hu, Z., Song, X., Zhai, W., & Wei, J. (2019) · Engineering · doi:10.1016/j.eng.2019.07.002 · Cited by 254
Laser Rapid Prototyping of Photonic Band-Gap Microstructures
Wanke, M. C., Lehmann, O., Müller, K., Wen, Q., & Stuke, M. (1997) · Science · doi:10.1126/science.275.5304.1284 · Cited by 251
Wong, S., Deubel, M., Pérez‐Willard, F., John, S., Ozin, G. A., Wegener, M., & von Freymann, G. (2006) · Advanced Materials · doi:10.1002/adma.200501973 · Cited by 243
Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications
Lee, K., Yang, D., Park, S. H., & Kim, R. H. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.664 · Cited by 242
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Camposeo, A., Persano, L., Farsari, M., & Pisignano, D. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800419 · Cited by 227
Che, K., Yuan, C., Wu, J., Jerry Qi, H., & Meaud, J. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4034706 · Cited by 225
Two-photon polymerisation for three-dimensional micro-fabrication
Wu, S., Serbin, J., & Gu, M. (2006) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2006.03.004 · Cited by 222
Chen, D., & Zheng, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26980-7 · Cited by 222
New developments in fused deposition modeling of ceramics
Bellini, A., Shor, L., & Guceri, S. I. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612901 · Cited by 216
Highly-stretchable 3D-architected Mechanical Metamaterials
Jiang, Y., & Wang, Q. (2016) · Scientific Reports · doi:10.1038/srep34147 · Cited by 216
Terahertz plasmonic high pass filter
Wu, D., Fang, N., Sun, C., Zhang, X., Padilla, W. J., Basov, D. N., Smith, D. R., & Schultz, S. (2003) · Applied Physics Letters · doi:10.1063/1.1591083 · Cited by 214
Torrents, A., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., & Valdevit, L. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.03.007 · Cited by 212
Origami-based cellular metamaterial with auxetic, bistable, and self-locking properties
Kamrava, S., Mousanezhad, D., Ebrahimi, H., Ghosh, R., & Vaziri, A. (2017) · Scientific Reports · doi:10.1038/srep46046 · Cited by 212
Straub, M., & Gu, M. (2002) · Optics Letters · doi:10.1364/ol.27.001824 · Cited by 206
Laser and Electron-Beam Induced Growth of Nanoparticles for 2D and 3D Metal Patterning
Stellacci, F., Bauer, C. A., Meyer-Friedrichsen, T., Wenseleers, W., Alain, V., Kuebler, S. M., Pond, S. J. K., Zhang, Y., Marder, S. R., & Perry, J. W. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020205)14:3<194::aid-adma194>3.0.co;2-w · Cited by 204
Design of Auxetic Structures via Mathematical Optimization
Schwerdtfeger, J., Wein, F., Leugering, G. R., et al. (2011) · Advanced Materials · doi:10.1002/adma.201004090 · Cited by 190
Additive Manufacturing Technology: Potential Implications for U.S. Manufacturing CompetitivenessPreprint
Ford, S. L. N. (2014) · SSRN Electronic Journal · Cited by 190
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., Kadic, M., Milton, G. W., & Wegener, M. (2014) · New Journal of Physics · doi:10.1088/1367-2630/16/3/033032 · Cited by 182
Fabrication of Conductive 3D Gold‐Containing Microstructures via Direct Laser Writing
Blasco, E., Müller, J., Müller, P., Trouillet, V., Schön, M., Scherer, T., Barner‐Kowollik, C., & Wegener, M. (2016) · Advanced Materials · doi:10.1002/adma.201506126 · Cited by 182
Laser chemical vapor deposition: A technique for selective area deposition
Allen, S. D. (1981) · Journal of Applied Physics · doi:10.1063/1.328600 · Cited by 179
Li, L., & Fourkas, J. T. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70130-x · Cited by 179
Thermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., & Moritz, T. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 177
Multidimensional Architectures for Functional Optical Devices
Arpin, K. A., Mihi, A., Johnson, H. T., Baca, A. J., Rogers, J. A., Lewis, J. A., & Braun, P. V. (2010) · Advanced Materials · doi:10.1002/adma.200904096 · Cited by 176
Space-coiling metamaterials with double negativity and conical dispersion
Liang, Z., Feng, T., Lok, S., Liu, F., Ng, K. B., Chan, C. H., Wang, J., Han, S., Lee, S., & Li, J. (2013) · Scientific Reports · doi:10.1038/srep01614 · Cited by 175
Horn-like space-coiling metamaterials toward simultaneous phase and amplitude modulation
Ghaffarivardavagh, R., Nikolajczyk, J., Holt, R. G., Anderson, S. W., & Zhang, X. (2018) · Nature Communications · doi:10.1038/s41467-018-03839-z · Cited by 170
Bistable Auxetic Mechanical Metamaterials Inspired by Ancient Geometric MotifsPreprint
Rafsanjani, A., & Pasini, D. (n.d.) · RePEc: Research Papers in Economics · Cited by 169
3D printed anisotropic dielectric composite with meta-material features
Isakov, D. V., Lei, Q., Castles, F., Stevens, C. J., Grovenor, C. R. M., & Grant, P. S. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.176 · Cited by 167
Structured Metal Film as a Perfect Absorber
Xiong, X., Jiang, S., Hu, Y., Peng, R., & Wang, M. (2013) · Advanced Materials · doi:10.1002/adma.201300223 · Cited by 164
Materials Selection in Mechanical Design
Mazínová, I., & Florian, P. (2014) · Lecture Notes in Mechanical Engineering · doi:10.1007/978-3-319-05203-8_21 · Cited by 163
Haberman, M. R., & Guild, M. D. (2016) · Physics Today · doi:10.1063/pt.3.3198 · Cited by 162
Multiphoton polymerization of hybrid materials
Farsari, M., Vamvakaki, M., & Chichkov, B. N. (2010) · Journal of Optics · doi:10.1088/2040-8978/12/12/124001 · Cited by 161
Pentamode Metamaterials with Independently Tailored Bulk Modulus and Mass Density
Kadic, M., Bückmann, T., Schittny, R., Gumbsch, P., & Wegener, M. (2014) · Physical Review Applied · doi:10.1103/physrevapplied.2.054007 · Cited by 160
Dynamics of a bistable Miura-origami structure
Fang, H., Li, S., Ji, H., & Wang, K. W. (2017) · Physical review. E · doi:10.1103/physreve.95.052211 · Cited by 156
Formanek, F., Takeyasu, N., Tanaka, T., Chiyoda, K., Ishikawa, A., & Kawata, S. (2006) · Optics Express · doi:10.1364/opex.14.000800 · Cited by 154
A COMPACT MONOPOLE MIMO ARRAY FOR THE 5–6-GHz BAND
Mathew, K. T., Anil, L., Paul, B., et al. (2007) · Hispana · doi:10.1002/mop · Cited by 148
Additively manufactured metallic pentamode meta-materials
Hedayati, R., Leeflang, A. M., & ZADPOOR, A. A. (2017) · Applied Physics Letters · doi:10.1063/1.4977561 · Cited by 145
3D PRINTING OF ANISOTROPIC METAMATERIALS
Garcia, C. R., Correa, J. I. C., Espalin, D., Barton, J. H., Rumpf, R. C., Wicker, R. B., & González, V. (2012) · Progress In Electromagnetics Research Letters · doi:10.2528/pierl12070311 · Cited by 143
Super-fine ink-jet printing: toward the minimal manufacturing system
Murata, K., MATSUMOTO, J., Tezuka, A., Matsuba, Y., & Yokoyama, H. (2005) · Microsystem Technologies · doi:10.1007/s00542-005-0023-9 · Cited by 137
Elastic measurements on macroscopic three-dimensional pentamode metamaterials
Schittny, R., Bückmann, T., Kadic, M., & Wegener, M. (2013) · Applied Physics Letters · doi:10.1063/1.4838663 · Cited by 128
Three‐Dimensional Bi‐Chiral Photonic Crystals
Thiel, M., Rill, M. S., von Freymann, G., & Wegener, M. (2009) · Advanced Materials · doi:10.1002/adma.200901601 · Cited by 126
Large deformations of soft metamaterials fabricated by 3D printing
Bodaghi, M., Damanpack, A. R., Hu, G., & Liao, W. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.002 · Cited by 124
Mieszala, M., Hasegawa, M., Guillonneau, G., Bauer, J., Raghavan, R., Frantz, C., Kraft, O., Mischler, S., Michler, J., & Philippe, L. (2016) · Small · doi:10.1002/smll.201602514 · Cited by 122
Improvement in the reduction of silver ions in aqueous solution using two-photon sensitive dye
Ishikawa, A., Tanaka, T., & Kawata, S. (2006) · Applied Physics Letters · doi:10.1063/1.2345601 · Cited by 120
Li, T., Hu, X., Chen, Y., & Wang, L. (2017) · Scientific Reports · doi:10.1038/s41598-017-09218-w · Cited by 120
On three-dimensional dilational elastic metamaterials
Bückmann, T., Schittny, R., Thiel, M., et al. (2014) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000042057 · Cited by 117
Valdevit, L., Godfrey, S. W., Schaedler, T. A., Jacobsen, A. J., & Carter, W. B. (2013) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2013.160 · Cited by 110
Terahertz metamaterials fabricated by inkjet printing
Walther, M., Ortner, A., Meier, H., Löffelmann, U., Smith, P. J., & Korvink, J. G. (2009) · Applied Physics Letters · doi:10.1063/1.3276544 · Cited by 109
Development of a binder formulation for fused deposition of ceramics
McNulty, T. F., Mohammadi, F., Bandyopadhyay, A. K., Shanefield, D. J., Danforth, S. C., & Safari, A. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810239012 · Cited by 109
Duan, X., Sun, H., Kaneko, K., & Kawata, S. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.126 · Cited by 103
Non-stochastic Ti–6Al–4V foam structures with negative Poisson's ratio
Yang, L., Cormier, D., West, H., Harrysson, O. L. A., & Knowlson, K. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.08.053 · Cited by 100
Metaphotonics: An emerging field with opportunities and challenges
Baev, A. S., Prasad, P. N., Ågren, H., Samoc, M. J., & Wegener, M. (2015) · Physics Reports · doi:10.1016/j.physrep.2015.07.002 · Cited by 99
Wang, K., Wu, C., Qian, Z. Y., Zhang, C., Wang, B., & Vannan, M. A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.006 · Cited by 99
Auxetic metamaterial simplifies soft robot design
Mark, A. G., Palagi, S., Qiu, T., & Fischer, P. (2016) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2016.7487701 · Cited by 92
Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects
Montemayor, L. C., & Greer, J. R. (2015) · Journal of Applied Mechanics · doi:10.1115/1.4030361 · Cited by 91
3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications
Saleh, E., Woolliams, P., Clarke, B., et al. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.10.002 · Cited by 90
Perspective: Acoustic metamaterials in transition
Wu, Y., Yang, M., & Sheng, P. (2017) · Journal of Applied Physics · doi:10.1063/1.5007682 · Cited by 86
Staude, I., Thiel, M., Essig, S., Wolff, C., Busch, K., von Freymann, G., & Wegener, M. (2010) · Optics Letters · doi:10.1364/ol.35.001094 · Cited by 84
Optical and Infrared Helical Metamaterials
Kaschke, J., & Wegener, M. (2016) · Nanophotonics · doi:10.1515/nanoph-2016-0005 · Cited by 84
3D printing of twisting and rotational bistable structures with tuning elements
Jeong, H. Y., An, S., Seo, I. C., Lee, E., Ha, S., Kim, N., & Jun, Y. C. (2019) · Scientific Reports · doi:10.1038/s41598-018-36936-6 · Cited by 84
Structural engineering of three-dimensional phononic crystals
Delpero, T., Stefan Schoenwald, A., Zemp, A., & Bergamini, A. (2015) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.10.033 · Cited by 82
Fabrication of Silicon Inverse Woodpile Photonic Crystals
Hermatschweiler, M., Ledermann, A., Ozin, G. A., Wegener, M., & von Freymann, G. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601074 · Cited by 80
Fabrication of Terahertz Planar Metamaterials Using a Super-Fine Ink-Jet Printer
Takano, K., Kawabata, T., Hsieh, C.-F., Akiyama, K., Miyamaru, F., Abe, Y., Tokuda, Y., Pan, R., Pan, C., & Hangyo, M. (2009) · Applied Physics Express · doi:10.1143/apex.3.016701 · Cited by 79
Flexible metamaterials at visible wavelengths
Falco, A. D., Plöschner, M., & Krauss, T. F. (2010) · New Journal of Physics · doi:10.1088/1367-2630/12/11/113006 · Cited by 79
Xie, Y., Ye, S., Reyes, C., Sithikong, P., Popa, B.-I., Wiley, B. J., & Cummer, S. A. (2017) · Applied Physics Letters · doi:10.1063/1.4982718 · Cited by 77
Wang, K., Zhao, Y., Chang, Y.-H., Qian, Z. Y., Zhang, C., Wang, B., Vannan, M. A., & Wang, M. J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.022 · Cited by 76
Fabrication methods of 3D periodic metallic nano/microstructures for photonics applications
Hossain, M. M., & Gu, M. (2013) · Laser & Photonics Review · doi:10.1002/lpor.201300052 · Cited by 69
Vitreous carbon micro-lattice structures
Jacobsen, A. J., Mahoney, S., Carter, W. B., & Nutt, S. (2010) · Carbon · doi:10.1016/j.carbon.2010.10.059 · Cited by 68
Sengupta, S., & Li, S. (2018) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x18781040 · Cited by 65
Farsari, M., Ovsianikov, A., Vamvakaki, M., Sakellari, I., Gray, D. H., Chichkov, B. N., & Fotakis, C. (2008) · Applied Physics A · doi:10.1007/s00339-008-4642-8 · Cited by 56
Studies on thermoplastic 3D printing of steel–zirconia composites
Scheithauer, U., Bergner, A., Schwarzer, E., Richter, H., & Moritz, T. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.209 · Cited by 53
Mizeikis, V., Juodkazis, S., Tarozaitė, R., Juodkazytė, J., Juodkazis, K., & Misawa, H. (2007) · Optics Express · doi:10.1364/oe.15.008454 · Cited by 52
Design optimisation for an additively manufactured automotive component
Abdi, M., Ashcroft, I., & Wildman, R. D. (2017) · International Journal of Powertrains · doi:10.1504/ijpt.2018.090371 · Cited by 51
Self-citationDesign and Fabrication Challenges for Millimeter-Scale Three-Dimensional Phononic Crystals
Lucklum, F., & Vellekoop, M. J. (2017) · Crystals · doi:10.3390/cryst7110348 · Cited by 50
Li, J., Jia, B., & Gu, M. (2008) · Optics Express · doi:10.1364/oe.16.020073 · Cited by 46
A Broadband and omnidirectional electromagnetic wave concentrator with gradient woodpile structure
Yin, M., Tian, X. Y., Wu, L. L., & Li, D. C. (2013) · Optics Express · doi:10.1364/oe.21.019082 · Cited by 44
Systematic design of high-strength multicomponent metamaterials
Momeni, K., Mofidian, S. M. M., & Bardaweel, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108124 · Cited by 44
Fabrication of 3D metal/polymer microstructures by site-selective metal coating
Takeyasu, N., Tanaka, T., & Kawata, S. (2007) · Applied Physics A · doi:10.1007/s00339-007-4298-9 · Cited by 42
Development of three-dimensional photonic-crystal waveguides at optical-communication wavelengths
Imada, M., Lee, L. H., Okano, M., Kawashima, S., & Noda, S. (2006) · Applied Physics Letters · doi:10.1063/1.2197942 · Cited by 41
Houbertz, R., Declerck, P., Passinger, S., Ovsianikov, A., Serbin, J., & Chichkov, B. N. (2007) · physica status solidi (a) · doi:10.1002/pssa.200776416 · Cited by 39
Grant, P. S., Castles, F., Lei, Q., Wang, Y., Janurudin, J. M., Isakov, D., Speller, S. C., Dancer, C. E. J., & Grovenor, C. R. M. (2015) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2014.0353 · Cited by 38
Hilton, H. H., Lee, D. H., & Fouly, A. R. E. (2008) · Mechanics of Time-Dependent Materials · doi:10.1007/s11043-008-9054-9 · Cited by 36
Yan, Y., Rashad, M. I., Teo, E. J., Tanoto, H., Teng, J., & Bettiol, A. A. (2011) · Optical Materials Express · doi:10.1364/ome.1.001548 · Cited by 31
Buckling-driven delamination of carbon nanotube forests
Abadi, P. P. S. S., Hutchens, S. B., Greer, J. R., Cola, B. A., & Graham, S. L. (2013) · Applied Physics Letters · doi:10.1063/1.4802080 · Cited by 30
Direct Laser Fabrication of Composite Material 3D Microstructured Scaffolds
Rekštytė, S. (2014) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2014.01.0006 · Cited by 30
Fabrication of three‐dimensional photonic crystals in quantum‐dot‐based materials
Gu, M., Jia, B., Li, J., & Ventura, M. J. (2009) · Laser & Photonics Review · doi:10.1002/lpor.200910008 · Cited by 28
化学的および光学的にドープされたMott-Hubbard系UO 2+x における集団励起に起因する量子相に関するBose凝縮の可能な振る舞い
Steven, D. C., Durakiewicz, T., Francisco, J. E.-F., Yong, Q. A., David, A., Alan, R. B., Kevin, S. B., Joseph, A. B., Darrin, D. B., David, L., et al. (2013) · Physical Review B · Cited by 26
Realization of Complex 3-D Phononic Crystals With Wide Complete Acoustic Band Gaps
Lucklum, F., & Vellekoop, M. J. (2016) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2016.2543527 · Cited by 24
One-step, subwavelength patterning of plasmonic gratings in metal–polymer composites
Chaudhary, R. P., Ummethala, G., Jaiswal, A. K., Hawal, S., Saxena, S., & Shukla, S. (2016) · RSC Advances · doi:10.1039/c6ra22604c · Cited by 18
Two-Photon Polymerization Fabrication of Doped Microstructures
Daniel, S., De, L., Otuka, A. J. G., Tribuzi, V., & Cleber, R. (2012) · InTech eBooks · doi:10.5772/36061 · Cited by 17
Femtosecond Laser Lithography in Organic and Non-Organic Materials
Jipa, F., Zamfirescu, M., Velea, A., Popescu, M. A., & Dabu, R. (2013) · InTech eBooks · doi:10.5772/56579 · Cited by 16
Terahertz rare-earth orthoferrite metamaterials by 3-D direct writing technology
Zeng, X., Wang, R., Xi, X. Q., Li, B.-Y., & Zhou, J. H. (2018) · Optics Express · doi:10.1364/oe.26.017056 · Cited by 13
Jacobsen, A. J., Kolodziejska, J. A., Doty, R. E., Fink, K. D., Zhou, C., Roper, C. S., & Carter, W. B. (2010) · doi:10.26153/tsw/15249 · Cited by 11
Design optimization for an additively manufactured automotive component
Wildman, R. D., Ashcroft, I., & Abdi, M. (2017) · International Journal of Powertrains · doi:10.1504/ijpt.2018.10009559 · Cited by 7
Self-citationInkjet-printed silver-nanoparticle THz metamaterial
Kashiwagi, K., Xie, L., Li, X., Kageyama, T., Miura, M., Miyashita, H., Kono, J., & Lee, S.-S. (2016) · International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) · doi:10.1109/irmmw-thz.2016.7758981 · Cited by 6
Metamaterial Antennas and Radiative Systems
Caloz, C. (2010) · Wiley eBooks · doi:10.1002/9780470973370.ch11 · Cited by 3
Layer-by-layer three-dimensional chiral photonic crystals
Thiel, M., Wegener, M., & von Freymann, G. (2008) · Conference on Lasers and Electro-Optics · doi:10.1109/cleo.2008.4551903 · Cited by 2
Cited by
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Self-citationDeep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design
Zheng, X., Zhang, X., Chen, T., & Watanabe, I. (2023) · Advanced Materials · doi:10.1002/adma.202302530 · Cited by 372
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Additive Manufacturing of Carbon Using Commodity Polypropylene
Smith, P., Obando, A. G., Griffin, A., Robertson, M., Bounds, E., & Qiang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202208029 · Cited by 42
Metadata
- Authors
- Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., Wildman, R., Tuck, C., Clarke, M., Woods, E., & Clare, A. T.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 36
- Pages
- 101562
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3086323056
- Cited by
- 470
- References
- 183
- FWCI
- 26.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.