The DOI matches its Crossref record; 109 of the 109 references it cites were found in a registry or an index.
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Open accessAbstract
Abstract Metal additive manufacturing is a rapidly expanding area owing to its capacity to fabricate parts of intricate geometries with customized features for a wide range of applications. However, these parts generally exhibit inadequate and poor surface quality in the as-built configuration. The surface imperfections and defects ranging from staircase effect due to the layer by layer nature of the deposition techniques, partially fused feedstock material, balling effects, spatters, or inadequate fusion lead to a notably irregular surface morphology. This high surface roughness can significantly deteriorate the performance of the additive manufactured parts imposing a substantial limit on their prospective applications; for instance, fatigue performance, wear and scratch resistance, dimensional accuracy, and aesthetical aspects can be highly affected by these surface defects. A great effort has been lately dedicated to developing post-treatments for improving the surface quality of additively manufactured metallic parts. In this paper, various treatments applied to as-built samples fabricated using different additive manufacturing technologies are introduced and discussed. The advances in this area are highlighted, and the results obtained from different categories of post-treatments are compared and reviewed. Challenges and opportunities to gain more control on the surface roughness of additively manufactured metallic parts through the application of these post-treatments are addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Estrin, Y. Z., & Vinogradov, A. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.038 · Cited by 1,833
Use of NeuroEyeCoach™ to Improve Eye Movement Efficacy in Patients with Homonymous Visual Field Loss
Sahraie, A., Smania, N., & Zihl, J. (2016) · BioMed Research International · doi:10.1155/2016/5186461 · Cited by 1,772
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Fluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.020 · Cited by 539
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Ly, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
Fatigue performance of additive manufactured metallic parts
Spierings, A. B., Starr, T. L., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311302932 · Cited by 426
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.025 · Cited by 405
Schmidtke, K., Palm, F., Hawkins, A., & Emmelmann, C. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.047 · Cited by 389
AlMangour, B., & Yang, J.-M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.037 · Cited by 389
Yasa, E., Deckers, J., & Kruth, J. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156450 · Cited by 371
Bagehorn, S., Wehr, J., & Maier, H. J. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.008 · Cited by 371
Donoghue, J. M., Antonysamy, A. A., Martina, F., Colegrove, P. A., Williams, S., & Prangnell, P. B. (2016) · Materials Characterization · doi:10.1016/j.matchar.2016.02.001 · Cited by 369
Hot isostatic pressing of IN718 components manufactured by selective laser melting
Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., & Hoyer, K.-P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.006 · Cited by 353
Surface Morphology in Selective Laser Melting of Metal Powders
Yadroitsev, I., & Smurov, I. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.034 · Cited by 349
Bagherifard, S., Beretta, N., Monti, S., Riccio, M., Bandini, M., & Guagliano, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.055 · Cited by 327
Self-citationSurface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., & Wevers, M. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201100344 · Cited by 309
Yu, W., Sing, S. L., Chua, C. K., & Tian, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.017 · Cited by 303
Bone regeneration performance of surface-treated porous titanium
Amin Yavari, S., van der Stok, J., Chai, Y. C., Wauthle, R., Tahmasebi Birgani, Z., Habibovic, P., Mulier, M., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.054 · Cited by 297
Benedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Self-citationMarkowski, A. S., & Mannan, M. S. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.03.055 · Cited by 292
Sun, Y., Hebert, R. J., & Aindow, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.015 · Cited by 277
Uzan, N. E., Ramati, S., Shneck, R., Frage, N., & Yeheskel, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.030 · Cited by 274
Formation of biologically active bone-like apatite on metals and polymers by a biomimetic process
Kokubo, T. (1996) · Thermochimica Acta · doi:10.1016/0040-6031(95)02784-x · Cited by 272
Cheng, A., Humayun, A., Cohen, D. J., Boyan, B. D., & Schwartz, Z. (2014) · Biofabrication · doi:10.1088/1758-5082/6/4/045007 · Cited by 265
Laser polishing of parts built up by selective laser sintering
Lamikiz, A., Sánchez, J. A., López de Lacalle, L. N., & Arana, J. L. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.01.013 · Cited by 264
Karlsson, J., Snis, A., Engqvist, H., & Lausmaa, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.010 · Cited by 254
Pyka, G., Kerckhofs, G., Papantoniou, I., Speirs, M., Schrooten, J., & Wevers, M. (2013) · Materials · doi:10.3390/ma6104737 · Cited by 251
Benedetti, M., Torresani, E., Leoni, M., Fontanari, V., Bandini, M., Pederzolli, C., & Potrich, C. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.03.024 · Cited by 248
Self-citationImproved fatigue strength of additively manufactured Ti6Al4V by surface post processing
Kahlin, M., Ansell, H., Basu, D., Kerwin, A., Newton, L., Smith, B., & Moverare, J. J. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105497 · Cited by 246
du Plessis, A., & Macdonald, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101191 · Cited by 246
McAndrew, A. R., Alvarez Rosales, M., Colegrove, P. A., Hönnige, J. R., Ho, A., Fayolle, R., Eyitayo, K., Stan, I., Sukrongpang, P., Crochemore, A., et al. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.006 · Cited by 243
Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components
Martina, F., Roy, M. J., Szost, B. A., Terzi, S., Colegrove, P. A., Williams, S., Withers, P. J., Meyer, J., & Hofmann, M. (2016) · Materials Science and Technology · doi:10.1080/02670836.2016.1142704 · Cited by 242
Pegues, J. W., Shao, S., Shamsaei, N., Sanaei, N., Fatemi, A., Warner, D. H., Li, P., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105358 · Cited by 236
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
Demir, A. G., & Previtali, B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.091 · Cited by 235
Kirmanidou, Y., Sidira, M., Drosou, M.-E., Bennani, V., Bakopoulou, A., Tsouknidas, A., Michailidis, N., & Michalakis, K. (2016) · BioMed Research International · doi:10.1155/2016/2908570 · Cited by 231
van Hengel, I. A. J., Riool, M., Fratila-Apachitei, L. E., Witte-Bouma, J., Farrell, E., Zadpoor, A. A., Zaat, S. A. J., & Apachitei, I. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.030 · Cited by 216
Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy
Guo, W., Sun, R., Song, B., et al. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.06.020 · Cited by 204
Control of residual stress and distortion in aluminium wire + arc additive manufacture with rolling
Hönnige, J. R., Colegrove, P. A., Ganguly, S., Eimer, E., Kabra, S., & Williams, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.015 · Cited by 203
Hönnige, J. R., Colegrove, P. A., Ahmad, B., Fitzpatrick, M. E., Ganguly, S., Lee, T. L., & Williams, S. W. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.065 · Cited by 200
Kalentics, N., Boillat, E., Peyre, P., Gorny, C., Kenel, C., Leinenbach, C., Jhabvala, J., & Logé, R. E. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.083 · Cited by 199
Transport phenomena during direct metal deposition
He, X. L., & Mazumder, J. (2007) · Journal of Applied Physics · doi:10.1063/1.2710780 · Cited by 197
Tyagi, P., Goulet, T., Riso, C., Stephenson, R., Chuenprateep, N., Schlitzer, J., Benton, C., & Garcia-Moreno, F. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.001 · Cited by 195
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.055 · Cited by 190
Additively manufactured functionally graded biodegradable porous iron
Li, Y., Jahr, H., Pavanram, P., Bobbert, F. S. L., Puggi, U., Zhang, X.-Y., Pouran, B., Leeflang, M. A., Weinans, H., Zhou, J., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.013 · Cited by 189
Åsberg, M., Fredriksson, G., Hatami, S., Fredriksson, W., & Krakhmalev, P. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.08.046 · Cited by 184
Wen, P., Voshage, M., Jauer, L., Chen, Y., Qin, Y., Poprawe, R., & Schleifenbaum, J. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.057 · Cited by 179
Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium
Croes, M., Bakhshandeh, S., van Hengel, I. A. J., Lietaert, K., van Kessel, K. P. M., Pouran, B., van der Wal, B. C. H., Vogely, H. C., Van Hecke, W., Fluit, A. C., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.051 · Cited by 171
Kopp, A., Derra, T., Müther, M., Jauer, L., Schleifenbaum, J. H., Voshage, M., Jung, O., Smeets, R., & Kröger, N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.012 · Cited by 168
Nezhadfar, P. D., Shrestha, R., Phan, N., & Shamsaei, N. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.02.039 · Cited by 166
Ma, C., Andani, M. T., Qin, H., Moghaddam, N. S., Ibrahim, H., Jahadakbar, A., Amerinatanzi, A., Ren, Z., Zhang, H., Doll, G. L., et al. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.038 · Cited by 161
Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening
Kalentics, N., Boillat, É., Peyre, P., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.05.008 · Cited by 157
Zhang, H., Chiang, R., Qin, H., Ren, Z., Hou, X., Lin, D. L., Doll, G. L., Vasudevan, V. K., Dong, Y., & Ye, C. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.019 · Cited by 148
Bagherifard, S., Monti, S., Zuccoli, M. V., Riccio, M., Kondás, J., & Guagliano, M. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.02.094 · Cited by 137
Self-citationFatigue behavior prediction and analysis of shot peened mild carbon steels
Maleki, E., Ünal, O., & Kashyzadeh, K. R. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.06.004 · Cited by 135
Self-citationLaser polishing of additive manufactured CoCr alloy components with complex surface geometry
Yung, K. C., Xiao, T. Y., Choy, H. S., Wang, W. J., & Cai, Z. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.06.019 · Cited by 135
Wen, P., Qin, Y., Chen, Y., Voshage, M., Jauer, L., Poprawe, R., & Schleifenbaum, J. H. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.09.065 · Cited by 135
Ahmadi, S. M., Kumar, R., Borisov, E. V., Petrov, R., Leeflang, M. A., Li, Y., Tümer, N., Huizenga, R. M., Ayas, C., ZADPOOR, A. A., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.043 · Cited by 132
Influence of Shot Peening on AlSi10Mg Parts Fabricated by Additive Manufacturing
Maamoun, A. H., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2030040 · Cited by 129
Wysocki, B., Idaszek, J., Buhagiar, J., Szlązak, K., Brynk, T., Kurzydłowski, K. J., & Święszkowski, W. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.04.019 · Cited by 126
Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening
Luo, S., He, W., Chen, K., Nie, X., Zhou, L., & Li, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.04.029 · Cited by 120
Resorbable bone fixation alloys, forming, and post-fabrication treatments
Ibrahim, H., Esfahani, S. N., Poorganji, B., Dean, D., & Elahinia, M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.069 · Cited by 118
Liu, C., Zhang, M. J., & Chen, C. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.07.031 · Cited by 118
Salvati, E., Lunt, A. J. G., Ying, S., Sui, T., Zhang, H. J., Heason, C. P., Baxter, G. J., & Korsunsky, A. M. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.03.005 · Cited by 117
Sangid, M. D., Book, T. A., Naragani, D., Rotella, J., Ravi, P., Finch, A. W., Kenesei, P., Park, J., Sharma, H., Almer, J., et al. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.032 · Cited by 117
The effects of Hot Isostatic Pressing on parts fabricated by binder jetting additive manufacturing
Kumar, A. Y., Bai, Y., Eklund, A., & Williams, C. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.021 · Cited by 116
Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components
Tian, Y., Góra, W. S., Pan, A., Parimi, L. L., Hand, D. P., Tammas‐Williams, S., & Prangnell, P. B. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.12.010 · Cited by 115
Amanov, A. T. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126080 · Cited by 111
Dissolvable Metal Supports for 3D Direct Metal Printing
Hildreth, O. J., Nassar, A. R., Chasse, K. R., & Simpson, T. W. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0013 · Cited by 103
Udroiu, R., Braga, I. C., & Nedelcu, A. (2019) · Materials · doi:10.3390/ma12060995 · Cited by 97
Fatigue performance of cold spray deposits: Coating, repair and additive manufacturing cases
Bagherifard, S., & Guagliano, M. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105744 · Cited by 97
Self-citationSharma, A., Bandari, V., Ito, K., Kohama, K., Ramji, M., & Himasekhar Sai, B. V. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.02.007 · Cited by 96
Springer, H., Baron, C., Szczepaniak, A., Jägle, E. A., Wilms, M. B., Weisheit, A., & Raabe, D. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.084 · Cited by 91
Fatigue life and microstructure of additive manufactured Ti6Al4V after different finishing processes
Denti, L., Bassoli, E., Gatto, A., Santecchia, E., & Mengucci, P. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.03.119 · Cited by 90
Nasab, M. H., Giussani, A., Gastaldi, D., Tirelli, V., & Vedani, M. (2019) · Metals · doi:10.3390/met9101063 · Cited by 87
Diode-based additive manufacturing of metals using an optically-addressable light valve
Matthews, M. J., Guss, G. M., Drachenberg, D. R., Demuth, J. A., Heebner, J. E., Duoss, E. B., Kuntz, J. D., & Spadaccini, C. M. (2017) · Optics Express · doi:10.1364/oe.25.011788 · Cited by 84
Manfredi, D., Ambrosio, E. P., Calignano, F., Krishnan, M., Canali, R., Biamino, S., Pavese, M., Atzeni, E., Iuliano, L., Fino, P., et al. (2013) · Frattura ed Integrità Strutturale · Cited by 82
Chemical surface finishing of AlSi10Mg components made by additive manufacturing
Scherillo, F. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.12.002 · Cited by 82
Enhancing the Structural Performance of Lightweight Metals by Shot Peening
Bagherifard, S. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801140 · Cited by 82
Self-citationDirect metal writing: Controlling the rheology through microstructure
Chen, W., Thornley, L., Coe, H. G., Tonneslan, S. J., Vericella, J. J., Zhu, C. Y., Duoss, E. B., Hunt, R., Wight, M. J., Apelian, D., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4977555 · Cited by 79
AlMangour, B., & Yang, J. (2017) · JOM · doi:10.1007/s11837-017-2538-9 · Cited by 72
Nagalingam, A. P., & Yeo, S. H. (2018) · Wear · doi:10.1016/j.wear.2018.08.006 · Cited by 72
Duan, Y., Zhao, J., Chen, J., & Bai, G. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.03.022 · Cited by 70
Xu, X., Ganguly, S., Ding, J., Dirisu, P., Martina, F., Liu, X., & Williams, S. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.12.114 · Cited by 69
High-temperature oxidation behavior of laser-aided additively manufactured NiCrAlY coating
Ansari, M., Razavi, R. S., Barekat, M., & Man, H. C. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.02.001 · Cited by 68
Worts, N., Jones, J. R., & Squier, J. A. (2018) · Optics Communications · doi:10.1016/j.optcom.2018.08.055 · Cited by 65
Kim, M., Oh, W.-J., Baek, G. Y., Jo, Y.-K., Lee, K., Park, S., & Shim, D.-S. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.116420 · Cited by 54
Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition
Enrique, P. D., Marzbanrad, E., Mahmoodkhani, Y., Jiao, Z., Toyserkani, E., & Zhou, Y. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.01.108 · Cited by 53
Design and analysis of additive manufactured bimodal structures obtained by cold spray deposition
Bagherifard, S., Astaraee, A. H., Locati, M., Nawaz, A., Monti, S., Kondás, J., Singh, R., & Guagliano, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101131 · Cited by 42
Self-citationSolberg, K., & Berto, F. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105428 · Cited by 38
Karakurt, I., Ho, K. Y., Ledford, C., et al. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.097 · Cited by 37
Chen, Y., Wen, P., Voshage, M., Jauer, L., Qin, Y., Schleifenbaum, J. H., & Poprawe, R. (2019) · Journal of Laser Applications · doi:10.2351/1.5096118 · Cited by 37
Sembiring, J., Amanov, A. T., & Pyun, Y. S. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101391 · Cited by 34
Book, T. A., & Sangid, M. D. (2016) · JOM · doi:10.1007/s11837-016-1897-y · Cited by 26
Laser-initiated ablation of materials
Dowding, C., & Borman, A. J. (2014) · Elsevier eBooks · doi:10.1016/b978-1-78242-074-3.00022-2 · Cited by 12
Okura, Y., Sasaki, H., & SOYAMA, H. (2019) · Lecture notes in mechanical engineering · doi:10.1007/978-981-15-0054-1_10 · Cited by 12
Cited by
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Metadata
- Authors
- Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 37
- Pages
- 101619
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3091330969
- Cited by
- 528
- References
- 109
- FWCI
- 30.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.