The DOI matches its Crossref record; 95 of the 95 references it cites were found in a registry or an index.
Process intensification for post-combustion CO2 capture with chemical absorption: A critical review
Open accessAbstract
The concentration of CO2 in the atmosphere is increasing rapidly. CO2 emissions may have an impact on global climate change. Effective CO2 emission abatement strategies such as carbon capture and storage (CCS) are required to combat this trend. Compared with pre-combustion carbon capture and oxy-fuel carbon capture approaches, post-combustion CO2 capture (PCC) using solvent process is one of the most mature carbon capture technologies. There are two main barriers for the PCC process using solvent to be commercially deployed: (a) high capital cost; (b) high thermal efficiency penalty due to solvent regeneration. Applying process intensification (PI) technology into PCC with solvent process has the potential to significantly reduce capital costs compared with conventional technology using packed columns. This paper intends to evaluate different PI technologies for their suitability in PCC process. The study shows that rotating packed bed (RPB) absorber/stripper has attracted much interest due to its high mass transfer capability. Currently experimental studies on CO2 capture using RPB are based on standalone absorber or stripper. Therefore a schematic process flow diagram of intensified PCC process is proposed so as to motivate other researches for possible optimal design, operation and control. To intensify heat transfer in reboiler, spinning disc technology is recommended. To replace cross heat exchanger in conventional PCC (with packed column) process, printed circuit heat exchanger will be preferred. Solvent selection for conventional PCC process has been studied extensively. However, it needs more studies for solvent selection in intensified PCC process. The authors also predicted research challenges in intensified PCC process and potential new breakthrough from different aspects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
Intergovernmental Panel on Climate Change (IPCC)
(2012) · Reference Reviews · doi:10.1108/09504121211205250 · Cited by 4,477
(2007) · doi:10.1002/9780470172605 · Cited by 2,813
Membrane Gas Separation: A Review/State of the Art
Bernardo, P., Drioli, E., & Golemme, G. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8019032 · Cited by 2,147
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889 · cited 1×
“A lot of researchers have focused on new adsorbent 90 development, process optimization, and equipment innovation [26-50].”
BackgroundA Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730 · cited 1×
“Chemically modified adsorbents have proved to be applicable for PCC process 80 because of large CO2 adsorption capacity, high adsorption and desorption rates, 81 high tolerance to moisture, and high selectivity towards CO2 over other gases [24].”
BackgroundInterfacial turbulence: Hydrodynamic instability and the marangoni effect
Sternling, C. V., & Scriven, L. E. (1959) · AIChE Journal · doi:10.1002/aic.690050421 · Cited by 1,036
Membrane technologies for CO2 separation
Brunetti, A., Scura, F., Barbieri, G., & Drioli, E. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.11.040 · Cited by 999
Abu-Zahra, M. R. M., Niederer, J. P. M., Feron, P. H. M., & Versteeg, G. F. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00032-1 · Cited by 857
World Meteorological Organization (WMO)
Bekiashev, K. A., & Serebriakov, V. V. (1981) · International Marine Organizations · doi:10.1007/978-94-009-8261-1_47 · Cited by 703
Bishnoi, S., & Rochelle, G. T. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00182-2 · Cited by 650
A review of efficiency penalty in a coal-fired power plant with post-combustion CO2 capture
Goto, K., Yogo, K., & Higashii, T. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.020 · Cited by 523
PEG modified poly(amide-b-ethylene oxide) membranes for CO2 separation
Car, A., Stropnik, C., Yave, W., & Peinemann, K.-V. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.09.023 · Cited by 475
Abanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Compact Heat Exchangers: Selection, Design and Operation
Hesselgreaves, J., Law, R., & Reay, D. (2001) · Cited by 433
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424 · cited 1×
“A lot of researchers have focused on new adsorbent 90 development, process optimization, and equipment innovation [26-50].”
BackgroundFavre, E. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.02.007 · Cited by 402
Carbon dioxide capture with concentrated, aqueous piperazine
Freeman, S. A., Dugas, R., Van Wagener, D. H., Nguyen, T., & Rochelle, G. T. (2010) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.10.008 · Cited by 401
Aronu, U. E., Gondal, S., Hessen, E. T., Haug-Warberg, T., Hartono, A., Hoff, K. A., & Svendsen, H. F. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.08.042 · Cited by 323
Li, Q., Flamant, G., Yuan, X., Neveu, P., & Luo, L. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.066 · Cited by 323
Membrane processes for post-combustion carbon dioxide capture: A parametric study
BOUNACEUR, R., LAPE, N., ROIZARD, D., VALLIERES, C., & FAVRE, E. (2006) · Energy · doi:10.1016/j.energy.2005.10.038 · Cited by 314
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Zhao, M., Minett, A. I., & Harris, A. T. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee22890d · Cited by 285
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280 · cited 1×
“A lot of researchers have focused on new adsorbent 90 development, process optimization, and equipment innovation [26-50].”
BackgroundScaling up carbon dioxide capture and storage: From megatons to gigatons
Herzog, H. J. (2011) · Energy Economics · doi:10.1016/j.eneco.2010.11.004 · Cited by 279
Jassim, M. S., Rochelle, G., Eimer, D., & Ramshaw, C. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051104r · Cited by 277
Self-citationDynamic modeling and simulation of a CO2 absorber column for post-combustion CO2 capture
Kvamsdal, H. M., Jakobsen, J. P., & Hoff, K. A. (2009) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2008.03.002 · Cited by 248
Removal of Carbon Dioxide by Absorption in a Rotating Packed Bed
Lin, C.-C., Liu, W.-T., & Tan, C.-S. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020669+ · Cited by 237
Dynamic modelling of CO2 absorption for post combustion capture in coal-fired power plants
Lawal, A., Wang, M., Stephenson, P., & Yeung, H. (2009) · Fuel · doi:10.1016/j.fuel.2008.11.009 · Cited by 227
Self-citationLi, K., Jiang, J., Yan, F., Tian, S., & Chen, X. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.057 · Cited by 223
Effects of the Temperature Bulge in CO2 Absorption from Flue Gas by Aqueous Monoethanolamine
Kvamsdal, H. M., & Rochelle, G. T. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie061651s · Cited by 218
Stéphenne, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.642 · Cited by 214
A comparative review between amines and ammonia as sorptive media for post-combustion CO2 capture
Shakerian, F., Kim, K.-H., Szulejko, J. E., & Park, J.-W. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.026 · Cited by 213
Lawal, A., Wang, M., Stephenson, P., Koumpouras, G., & Yeung, H. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.030 · Cited by 212
Self-citationMicrowave pyrolysis of rice straw to produce biochar as an adsorbent for CO2 capture
Huang, Y.-F., Chiueh, P.-T., Shih, C.-H., Lo, S.-L., Sun, L., Zhong, Y., & Qiu, C. (2015) · Energy · doi:10.1016/j.energy.2015.02.026 · Cited by 211
Aqua ammonia process for simultaneous removal of CO2, SO2 and NOx
Resnik, K. P., Yeh, J. T., & Pennline, H. W. (2004) · International Journal of Environmental Technology and Management · doi:10.1504/ijetm.2004.004634 · Cited by 210
Lawal, A., Wang, M., Stephenson, P., & Obi, O. (2012) · Fuel · doi:10.1016/j.fuel.2010.10.056 · Cited by 202
Self-citationIonic liquids for post-combustion CO2 absorption
Wappel, D., Gronald, G., Kalb, R., & Draxler, J. (2010) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.11.012 · Cited by 201
Absorption of carbon dioxide with piperazine and its mixtures in a rotating packed bed
Tan, C.-S., & Chen, J.-E. (2006) · Separation and Purification Technology · doi:10.1016/j.seppur.2005.10.001 · Cited by 200
Zhao, L., Riensche, E., Blum, L., & Stolten, D. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.02.003 · Cited by 193
Albo, J., Luis, P., & Irabien, A. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1014266 · Cited by 187
Numerical parametric study on CO2 capture by indirect thermal swing adsorption
Clausse, M., Merel, J., & Meunier, F. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.036 · Cited by 185
Maring, B. J., & Webley, P. A. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.01.009 · Cited by 183
Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds
Zhang, W., Liu, H., Sun, C., Drage, T. C., & Snape, C. E. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.05.018 · Cited by 178
A comparison of the CO2 capture characteristics of zeolites and metal–organic frameworks
Krishna, R., & van Baten, J. M. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.11.031 · Cited by 176
Absorption and desorption rates of carbon dioxide with monoethanolamine and piperazine
Dugas, R., & Rochelle, G. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.153 · Cited by 160
Zhang, L., Wang, J., Xiang, Y., Zeng, X., & Chen, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1025979 · Cited by 142
Adsorption kinetics for CO2 on highly selective zeolites NaKA and nano-NaKA
Cheung, O. Y. H., Bacsik, Z., Liu, Q., Mace, A., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.017 · Cited by 141
Microporous adsorbents for CO2 capture – a case for microporous polymers?
Xu, C., & Hedin, N. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.007 · Cited by 139
Dynamic modelling, validation and analysis of post-combustion chemical absorption CO2 capture plant
Biliyok, C., Lawal, A., Wang, M., & Seibert, F. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.05.001 · Cited by 123
Self-citationComparison of solvents for post-combustion capture of CO2 by chemical absorption
Kothandaraman, A., Nord, L. O., Bolland, O., Herzog, H. J., & McRae, G. J. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.180 · Cited by 118
Reduction of CO2 concentration in a zinc/air battery by absorption in a rotating packed bed
Cheng, H.-H., & Tan, C. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.046 · Cited by 116
Mimura, T., Shimojo, S., Suda, T., Iijima, M., & Mitsuoka, S. (1995) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00029-d · Cited by 115
MODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS
Tung, H., & Mah, R. S. H. (1985) · Chemical Engineering Communications · doi:10.1080/00986448508911667 · Cited by 113
Dowell, N. M., & Shah, N. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.01.006 · Cited by 106
Yu, C., Cheng, H.-H., & Tan, C. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.03.015 · Cited by 105
Joel, A. S., Wang, M., Ramshaw, C., & Oko, E. (2014) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.12.005 · Cited by 103
Self-citationDynamic modelling and analysis of an amine-based post-combustion CO2 capture absorption column
Dowell, N. M., Samsatli, S., & Shah, N. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.10.013 · Cited by 101
Lucquiaud, M., & Gibbins, J. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2011.03.003 · Cited by 100
Zhang, W., Liu, H., Sun, C., Drage, T. C., & Snape, C. E. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.063 · Cited by 90
Removal of CO2 from indoor air by alkanolamine in a rotating packed bed
Cheng, H.-H., & Tan, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.09.004 · Cited by 89
The Fluor Daniel® econamine FG process: Past experience and present day focus
Sander, M., & Mariz, C. L. (1992) · Energy Conversion and Management · doi:10.1016/0196-8904(92)90029-v · Cited by 88
The role of process intensification in cutting greenhouse gas emissions
Reay, D. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.01.004 · Cited by 87
Mangalapally, H. P., & Hasse, H. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.06.054 · Cited by 85
A comparison of two methods for producing CO2 capture adsorbents
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.146 · Cited by 85
Performance of a rotating zigzag bed—A new HIGEE
Wang, G. Q., Xu, Z., Yu, Y. L., & Ji, J. B. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2007.11.001 · Cited by 85
Energy Efficiency Indicators for Public Electricity Production from Fossil Fuels
International Energy Agency (2009) · OECD eBooks · doi:10.1787/9789264061996-en · Cited by 77
Study of a Modified Amine-Based Regeneration Unit
Tobiesen, F. A., & Svendsen, H. F. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050544f · Cited by 73
Carbon dioxide absorption in a cross-flow rotating packed bed
Lin, C., & Chen, B.-C. (2010) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2010.11.015 · Cited by 71
Sebastia‐Saez, D., Gu, S., Ranganathan, P., & Papadikis, K. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.10.013 · Cited by 70
Carbon dioxide capture by blended alkanolamines in rotating packed bed
Cheng, H.-H., & Tan, C. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.123 · Cited by 63
Response surface methodology as an efficient tool for optimizing carbon adsorbents for CO2 capture
Gil, M. V., Martínez, M., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.06.018 · Cited by 63
CO2 capture by piperazine mixed with non-aqueous solvent diethylene glycol in a rotating packed bed
Yu, C., Wu, T.-W., & Tan, C. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.10.014 · Cited by 62
Joel, A. S., Wang, M., & Ramshaw, C. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.02.064 · Cited by 59
Self-citationCarbon Capture: A Technology Assessment
Folger, P. F. (2013) · University of North Texas Digital Library (University of North Texas) · Cited by 56
Evaluation of alkanolamine solutions for carbon dioxide removal in cross-flow rotating packed beds
Lin, C., Lin, Y., & Tan, C. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.009 · Cited by 53
Dasgupta, S., Biswas, N., Aarti, A., Gode, N. G., Divekar, S., Nanoti, A., & Goswami, A. N. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.10.007 · Cited by 50
CO2 capture from hot stove gas in steel making process
Cheng, H.-H., Shen, J.-F., & Tan, C. (2010) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2009.12.006 · Cited by 49
Dowell, N. M., & Shah, N. (2014) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2014.05.007 · Cited by 47
Carbon Dioxide Absorption into NaOH Solution in a Cross-flow Rotating Packed Bed
Lin, C. C., & Chen, B. C. (2007) · Journal of Industrial and Engineering Chemistry · Cited by 47
Optimisation of Post-combustion CO2 Capture for Flexible Operation
Dowell, N. M., & Shah, N. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.162 · Cited by 46
Post-combustion CO2 capture adsorbents from spent coffee grounds
González, A. S., Plaza, M. G., Pis, J. J., Rubiera, F., & Pevida, C. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.05.094 · Cited by 43
Mixed Alkanolamines with Low Regeneration Energy for CO2 Capture in a Rotating Packed Bed
Yu, C., & Tan, C. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.05.131 · Cited by 34
Lin, C., & Chen, Y.-W. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.02.002 · Cited by 32
Alkali-treated titanium dioxide as adsorbent for CO2 capture from air
Kapica‐Kozar, J., Kusiak‐Nejman, E., Wanag, A., Kowalczyk, Ł., Wróbel, R. J., Mozia, S. H., & Morawski, A. W. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.10.013 · Cited by 32
Carbon Di-Oxide Removal with Mesoporous Adsorbents in a Single Column Pressure Swing Adsorber
Dasgupta, S., Nanoti, A., Gupta, P., Jena, D., Goswami, A. N., & Garg, M. O. (2009) · Separation Science and Technology · doi:10.1080/01496390903183170 · Cited by 31
Semkov, K., & Kolev, N. (1991) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/0255-2701(91)87016-v · Cited by 22
Han, S. J., Bang, Y., Lee, H., Lee, K., Song, I. K., & Seo, J. G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.044 · Cited by 21
Potassium-based sorbents using mesostructured γ-alumina supports for low temperature CO2 capture
Durán-Guevara, M. B., Ortíz-Landeros, J., Pfeiffer, H., Espitia-Cabrera, M. I., & García, M. E. C. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.10.140 · Cited by 20
A novel (Zr–Ce) incorporated Ca(OH) 2 nanostructure as a durable adsorbent for CO 2 capture
Hlaing, N. N., Sreekantan, S., Othman, R., Hinode, H., Kurniawan, W., Thant, A. A., Mohamed, A. R., & Salim, C. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.07.043 · Cited by 19
Kolev, N., & Semkov, K. (1991) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/0255-2701(91)87017-w · Cited by 13
Rethinking CCS – Moving Forward in Times of Uncertainty
Herzog, H. J., & Eide, J. (2013) · Mining Report · doi:10.1002/mire.201300040 · Cited by 13
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
A scalable metal-organic framework as a durable physisorbent for carbon dioxide capture
Lin, J.-B., Nguyen, T. T. T., Vaidhyanathan, R., Burner, J., Taylor, J. M., Durekova, H., Akhtar, F., Mah, R. K., Ghaffari-Nik, O., Marx, S., et al. (2021) · Science · doi:10.1126/science.abi7281 · Cited by 1,053
A review on catalyst development for dry reforming of methane to syngas: Recent advances
Abdulrasheed, A., Jalil, A. A., Gambo, Y., Ibrahim, M., Hambali, H. U., & Shahul Hamid, M. Y. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.054 · Cited by 748
Cryogenic-based CO2 capture technologies: State-of-the-art developments and current challenges
Song, C., Liu, Q., Deng, S., Li, H., & Kitamura, Y. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.11.018 · Cited by 652
Metadata
- Authors
- Wang, M., Joel, A. S., Ramshaw, C., Eimer, D., & Musa, N. M.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 158
- Pages
- 275-291
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W1252729550
- Cited by
- 430
- References
- 95
- FWCI
- 32.69
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.