Microgel assembly: Fabrication, characteristics and application in tissue engineering and regenerative medicine
Open accessThe DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
Abstract
Microgel assembly, a macroscopic aggregate formed by bottom-up assembly of microgels, is now emerging as prospective biomaterials for applications in tissue engineering and regenerative medicine (TERM). This mini-review first summarizes the fabrication strategies available for microgel assembly, including chemical reaction, physical reaction, cell-cell interaction and external driving force, then highlights its unique characteristics, such as microporosity, injectability and heterogeneity, and finally itemizes its applications in the fields of cell culture, tissue regeneration and biofabrication, especially 3D printing. The problems to be addressed for further applications of microgel assembly are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034 · cited 1×
“3D printing of biopolymers (also referred to as bioinks) has exhibited the powerful ability to create a precisely-designed 3D architecture for customized or personalized TERM applications [80].”
BackgroundHydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703 · cited 1×
“Biochemical cues, such as active peptides, growth factors, proteoglycans and small-molecule drugs can be incorporated into hydrogels through covalent linkages or noncovalent interactions [6, 7].”
BackgroundA practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075 · cited 1×
“Biochemical cues, such as active peptides, growth factors, proteoglycans and small-molecule drugs can be incorporated into hydrogels through covalent linkages or noncovalent interactions [6, 7].”
BackgroundHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805 · cited 1×
“[82] reported a novel 3D bioprinting technique termed as freeform reversible embedding of suspended hydrogels (FRESH).”
BackgroundHydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,249 · cited 2×
“By designing and adjusting the composition, mechanical strength, size and shape of individual microgels, as well as incorporating diverse cells and/or bioactive factors, it is feasible to achieve microgel assembly with microscale homogeneous or heterogeneous composition, localized mechanical properties and tunable mic…”
BackgroundGriffin, D. R., Weaver, W. M., Scumpia, P. O., Di Carlo, D., & Segura, T. (2015) · Nature Materials · doi:10.1038/nmat4294 · Cited by 981 · cited 8×
“[19] show the high stratified expression of the epithelial markers (keratin-5, keratin-14 and CD49f) above the PEG-VS microgel assembly, and large-scale tissue structures within the construct (scale bar: 50 μm).”
BackgroundMethodInfluentialMacroscopic self-assembly through molecular recognition
Harada, A., Kobayashi, R., Takashima, Y., Hashidzume, A., & Yamaguchi, H. (2011) · Nature Chemistry · doi:10.1038/nchem.893 · Cited by 801 · cited 3×
“Assembling strategies for microgel assembly: (a) chemical reaction, including enzymatic catalysis (scale bar: N/A) [19], photo-induced radical polymerization (scale bar: 1 mm) [31], click chemistry (scale bar: 10 mm) [39] and non-enzymatic amidation reaction (scale bar: 1 mm) [43]; (b) physical reaction, including hos…”
BackgroundClick hydrogels, microgels and nanogels: Emerging platforms for drug delivery and tissue engineering
Jiang, Y., Chen, J., Deng, C., Suuronen, E. J., & Zhong, Z. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.001 · Cited by 762
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652 · cited 1×
“As the name implies, microgel assembly driven by chemical reaction relies on the occurrence of chemical reactions and the formation of covalent bonding between adjacent microgels [27], which are irreversible assembling processes in most cases and eventually result in chemically and mechanically stable microgel assembl…”
BackgroundWriting in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635 · cited 2×
“[81] used silicones, hydrogels, colloids, and living cells to create complex large aspect ratio 3D objects, thin closed shells, and hierarchically branched tubular networks in carbopol microgel (the authors called them as granular gel) medium.”
BackgroundDirected assembly of cell-laden microgels for fabrication of 3D tissue constructs
Du, Y., Lo, E., Ali, S., & Khademhosseini, A. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0801866105 · Cited by 591 · cited 3×
“[67] show a phase-contrast and fluorescence image of cell-laden (NIH 3T3) PEG microgel assembly (scale bar: 100 μm); (b) culturing cells on the surface of microgel assembly.”
BackgroundActivating an adaptive immune response from a hydrogel scaffold imparts regenerative wound healing
Griffin, D. R., Archang, M. M., Kuan, C.-H., Weaver, W. M., Weinstein, J. S., Feng, A. C., Ruccia, A., Sideris, E., Ragkousis, V., Koh, J., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00844-w · Cited by 505 · cited 1×
“In order to promote more extensive tissue ingrowth before scaffold degradation, the same group [79] switched the chirality of the peptides from L-to D -amino acids so that the degradation of microgel assembly scaffold could be slowed down.”
BackgroundMimicking biological functionality with polymers for biomedical applications
Green, J. J., & Elisseeff, J. H. (2016) · Nature · doi:10.1038/nature21005 · Cited by 495 · cited 2×
“Tissue and organ damage is one of the major reasons of death worldwide [1].”
BackgroundJammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456 · cited 4×
“Hyaluronic acid UV crosslinking Bio-ink for 3D printing [32]”
BackgroundMethodInfluentialCell-based tissue engineering strategies used in the clinical repair of articular cartilage
Huang, B. J., Hu, J. C., & Athanasiou, K. A. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.04.018 · Cited by 393 · cited 1×
“The biophysical and biochemical requirements of hydrogels for these applications are diverse, and they can be met in various ways, either to resemble particular natural tissues or to trigger desired biological responses [3].”
BackgroundEmerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388 · cited 2×
“To date, numerous natural and synthetic polymers have been explored to form hydrogels that can serve as vessels for cell culture, carriers for drug delivery and scaffolds for tissue engineering (TE) [2].”
BackgroundBiofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Zhao, D., Tan, S., Yuan, D., Lu, W., Rezenom, Y. H., Jiang, H., Wang, L., & Zhou, H. (2011) · Advanced Materials · doi:10.1002/adma.201003012 · Cited by 378
Vascularized organoid engineered by modular assembly enables blood perfusion
McGuigan, A. P., & Sefton, M. V. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602740103 · Cited by 372 · cited 1×
“[77] encapsulated HepG2 cells in short cylindrical collagen microrods, seeded endothelial cells on their outer surface, assembled these microrods by particle clogging and finally perfused the construct in vitro with whole blood.”
MethodGuided and fluidic self-assembly of microstructures using railed microfluidic channels
Chung, S. E., Park, W., Shin, S., Lee, S. A., & Kwon, S. (2008) · Nature Materials · doi:10.1038/nmat2208 · Cited by 349 · cited 1×
“Assembling strategies for microgel assembly: (a) chemical reaction, including enzymatic catalysis (scale bar: N/A) [19], photo-induced radical polymerization (scale bar: 1 mm) [31], click chemistry (scale bar: 10 mm) [39] and non-enzymatic amidation reaction (scale bar: 1 mm) [43]; (b) physical reaction, including hos…”
Injectable Granular Hydrogels with Multifunctional Properties for Biomedical Applications
Mealy, J. E., Chung, J. J., Jeong, H., Issadore, D., Lee, D., Atluri, P., & Burdick, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201705912 · Cited by 325 · cited 6×
“(a) Host-guest interaction Hyaluronic acid UV crosslinking Cardiac tissue engineering: [47]”
BackgroundMethodInfluentialMolding Cell Beads for Rapid Construction of Macroscopic 3D Tissue Architecture
Matsunaga, Y. T., Morimoto, Y., & Takeuchi, S. (2011) · Advanced Materials · doi:10.1002/adma.201004375 · Cited by 308 · cited 3×
“Assembling strategies for microgel assembly: (a) chemical reaction, including enzymatic catalysis (scale bar: N/A) [19], photo-induced radical polymerization (scale bar: 1 mm) [31], click chemistry (scale bar: 10 mm) [39] and non-enzymatic amidation reaction (scale bar: 1 mm) [43]; (b) physical reaction, including hos…”
BackgroundUntethered micro-robotic coding of three-dimensional material composition
Tasoglu, S., Diller, E., Guven, S., Sitti, M., & Demirci, U. (2014) · Nature Communications · doi:10.1038/ncomms4124 · Cited by 293 · cited 1×
“4 mT) and more complicated 3D microarchitecture were successfully obtained [71].”
BackgroundDNA-directed self-assembly of shape-controlled hydrogels
Qi, H., Ghodousi, M., Du, Y., Grun, C., Bae, H., Yin, P., & Khademhosseini, A. (2013) · Nature Communications · doi:10.1038/ncomms3275 · Cited by 280
Riley, L., Schirmer, L., & Segura, T. (2019) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2018.11.001 · Cited by 276 · cited 3×
“Secondly, random microgel assembly can be also formed by microgel jamming, where microgels are packed in a limited space without any assembly driving forces [26].”
BackgroundClickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263 · cited 4×
“PEG UV crosslinking Bio-ink for 3D printing [38]”
BackgroundMethodInfluentialNih, L. R., Sideris, E., Carmichael, S. T., & Segura, T. (2017) · Advanced Materials · doi:10.1002/adma.201606471 · Cited by 262 · cited 5×
“Later, the same research group used a similar enzymatic reaction to fabricate hyaluronic acid (HA) based microgel assembly [21, 29].”
BackgroundMethodResultInfluentialThree‐Dimensional Magnetic Assembly of Microscale Hydrogels
Xu, F., Wu, C. M., Rengarajan, V., Finley, T. D., Keles, H. O., Sung, Y., Li, B., Gurkan, U. A., & Demirci, U. (2011) · Advanced Materials · doi:10.1002/adma.201101962 · Cited by 251 · cited 1×
“In their earliest works [69], magnetic nanoparticles were mixed into cell-encapsulated PEGDA and GelMA microgels, and these microgels were assembled into multiple rows and spheroid multilayers geometry using parallel sheet magnets and a magnetic rod, respectively.”
MethodXu, J., Feng, Q., Lin, S., Yuan, W., Li, R., Li, J., Wei, K., Chen, X., Zhang, K., Yang, Y., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.04.031 · Cited by 241
Self-citationJeon, O., Lee, Y. B., Jeong, H., Lee, S. J., Wells, D., & Alsberg, E. (2019) · Materials Horizons · doi:10.1039/c9mh00375d · Cited by 221 · cited 4×
“117 ‘self-heals’ and forms a stable medium that firmly holds the printed constructs [34].”
BackgroundMethodInfluentialde Rutte, J. M., Koh, J., & Di Carlo, D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900071 · Cited by 209 · cited 5×
“[28] assembled two different peptide-grafted poly(ethylene glycol)-vinyl sulphone (PEG-VS) microgels via a non-canonical amide linkage between the peptides mediated by FXIIIa.”
BackgroundMethodInfluentialCryopreserved cell-laden alginate microgel bioink for 3D bioprinting of living tissues
Jeon, O., Lee, Y. B., Hinton, T. J., Feinberg, A. W., & Alsberg, E. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2018.11.009 · Cited by 183 · cited 3×
“[33,34] prepared Ca2+-crosslinked methacrylated alginate microgels and assembled them via photo-initiated radical polymerization.”
MethodLi, B., Wang, L., Xu, F., Gang, X., Demirci, U., Wei, D., Li, Y., Feng, Y., Jia, D., & Zhou, Y. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.04.026 · Cited by 182
Microfluidic-enabled bottom-up hydrogels from annealable naturally-derived protein microbeads
Sheikhi, A., de Rutte, J., Haghniaz, R., Akouissi, O., Sohrabi, A., Di Carlo, D., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.040 · Cited by 178
Hsu, R., Chen, P., Fang, J., Chen, Y., Chang, C., Lu, Y., & Hu, S. (2019) · Advanced Science · doi:10.1002/advs.201900520 · Cited by 178 · cited 5×
“Besides, such bulk hydrogels have merely nanoporous meshes inside the crosslinked network and lack of micropores, indicative of insufficient nutrient exchange and low cell viability inside hydrogels [8,9].”
BackgroundMethodInfluentialAdvanced cell therapies for articular cartilage regeneration
Madeira, C., Santhagunam, A., Salgueiro, J. B., & Cabral, J. M. S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2014.11.003 · Cited by 178 · cited 1×
“Cartilage tissue engineering: The repair and regeneration of cartilage defect is very challenging because of its avascular and aneural nature [78].”
BackgroundCell-laden microfluidic microgels for tissue regeneration
Jiang, W., Li, M., Chen, Z., & Leong, K. W. (2016) · Lab on a Chip · doi:10.1039/c6lc01193d · Cited by 177 · cited 1×
“Inspired by traditional gelation methods for bulk hydrogels and microgels, physical reactions, such as host-guest interaction, electrostatic interaction, hydrogen bonding and biotin-strepavidin conjugation, can also be used to assemble microgels [44].”
MethodDirect 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth
Zhang, H., Cong, Y., Osi, A. R., Zhou, Y., Huang, F., Zaccaria, R. P., Chen, J., Wang, R., & Fu, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910573 · Cited by 172 · cited 4×
“[24] show a 35-layer cylinder and a human-size ear model by 3D printing self-healable pre-crosslinked chitosan methacrylate/polyvinyl alcohol hybrid microgels (left scale bar: 5 mm, right scale bar: 2 cm); (b) support medium for 3D printing.”
BackgroundMethodInfluentialTruong, N. F., Kurt, E., Tahmizyan, N., Lesher-Pérez, S. C., Chen, M., Darling, N. J., Xi, W., & Segura, T. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.054 · Cited by 172
3D Printing of Strong and Tough Double Network Granular Hydrogels
Hirsch, M., Charlet, A., & Amstad, E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005929 · Cited by 168 · cited 4×
“[36] fabricated 2-acrylamido-2-methylpropane sulfonic acid (AMPS) microgels, immersed them in acrylamide monomer solution, and realized microgel assembly though photo-initiated radical polymerization to form a second covalently crosslinked percolating network among microgels.”
BackgroundInfluentialGuided and magnetic self-assembly of tunable magnetoceptive gels
Tasoglu, S., Yu, C. H., Gungordu, H. I., Guven, S., Vural, T., & Demirci, U. (2014) · Nature Communications · doi:10.1038/ncomms5702 · Cited by 168 · cited 2×
“Assembling strategies for microgel assembly: (a) chemical reaction, including enzymatic catalysis (scale bar: N/A) [19], photo-induced radical polymerization (scale bar: 1 mm) [31], click chemistry (scale bar: 10 mm) [39] and non-enzymatic amidation reaction (scale bar: 1 mm) [43]; (b) physical reaction, including hos…”
MethodBioprinting of a Cell-Laden Conductive Hydrogel Composite
Spencer, A. R., Shirzaei Sani, E., Soucy, J. R., Corbet, C. C., Primbetova, A., Koppes, R. A., & Annabi, N. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07353 · Cited by 168
Particle Hydrogels Based on Hyaluronic Acid Building Blocks
Sideris, E., Griffin, D. R., Ding, Y., Li, S., Weaver, W. M., Carlo, D. D., Hsiai, T. K., & Segura, T. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00444 · Cited by 166 · cited 5×
“Later, the same research group used a similar enzymatic reaction to fabricate hyaluronic acid (HA) based microgel assembly [21, 29].”
BackgroundMethodInfluentialMicrofluidic cell culture models for tissue engineering
Inamdar, N. K., & Borenstein, J. T. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.05.512 · Cited by 163
Functional Microgels: Recent Advances in Their Biomedical Applications
Agrawal, G., & Agrawal, R. (2018) · Small · doi:10.1002/smll.201801724 · Cited by 162
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
Designing Microgels for Cell Culture and Controlled Assembly of Tissue Microenvironments
Caldwell, A. S., Aguado, B. A., & Anseth, K. S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201907670 · Cited by 159 · cited 3×
“More importantly, DNA base complementation and polypeptide self-assembly, as ubiquitous hydrogen bonding interaction in living organisms, are sequence-specific and highly programmable, which makes them very useful in microgel assembly [16].”
BackgroundTissue engineering strategies to study cartilage development, degeneration and regeneration
Bhattacharjee, M., Coburn, J., Centola, M., Murab, S., Barbero, A., Kaplan, D. L., Martin, I., & Ghosh, S. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.08.010 · Cited by 159
Biopolymer Microparticles Prepared by Microfluidics for Biomedical Applications
Jo, Y. K., & Lee, D. (2019) · Small · doi:10.1002/smll.201903736 · Cited by 151 · cited 2×
“alcohol UV crosslinking Bio-ink for 3D printing [54]”
BackgroundMethodThe assembly of cell-encapsulating microscale hydrogels using acoustic waves
Xu, F., Finley, T. D., Turkaydin, M., Sung, Y., Gurkan, U. A., Yavuz, A. S., Guldiken, R. O., & Demirci, U. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.010 · Cited by 150 · cited 1×
“Similar to magnetic force, acoustic force was also tried by Demirci’s team [72] for microgel assembly.”
BackgroundClickable Microgel Scaffolds as Platforms for 3D Cell Encapsulation
Caldwell, A. S., Campbell, G. T., Shekiro, K. M. T., & Anseth, K. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700254 · Cited by 140 · cited 4×
“Caldwell and colleagues [39] prepared two types of PEG microgels containing excess azide or alkyne functional groups and realized their assembly via strain-promoted azide/alkyne click reaction.”
BackgroundInfluentialFeng, Q., Li, Q., Wen, H., Chen, J., Liang, M., Huang, H., Lan, D., Dong, H., & Cao, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906690 · Cited by 138 · cited 5×
“[10] encapsulated cells into gelatin/hyaluronic acid hybrid microgels, injected them into a silicone cavity mold and cultured for a certain period (allowing cells to proliferate and grow onto the microgel surface) for microgel assembly.”
BackgroundMethodInfluentialSelf-citationAbu-Rabeah, K., Polyak, B., Ionescu, R. E., Cosnier, S., & Marks, R. S. (2005) · Biomacromolecules · doi:10.1021/bm050339j · Cited by 136
Cartilage tissue formation through assembly of microgels containing mesenchymal stem cells
Li, F., Truong, V. X., Fisch, P., Levinson, C., Glattauer, V., Zenobi‐Wong, M., Thissen, H. W., Forsythe, J. S., & Frith, J. E. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.015 · Cited by 136 · cited 4×
“[43] applied 4-arm poly(ethylene glycol)-N-hydroxysuccinimide (PEG-NHS) as a crosslinker to assemble PEG/Gel hybrid microgels via the formation of amide bonds between primary amines on the gelatin backbone and PEG-NHS.”
BackgroundInfluentialAligned hydrogel tubes guide regeneration following spinal cord injury
Dumont, C. M., Carlson, M. A., Munsell, M. K., Ciciriello, A. J., Strnadová, K., Park, J., Cummings, B. J., Anderson, A. J., & Shea, L. D. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.052 · Cited by 128 · cited 3×
“PEG Click reaction Neuronal tissue engineering [35]”
MethodInfluentialAssembly of PEG Microgels into Porous Cell‐Instructive 3D Scaffolds via Thiol‐Ene Click Chemistry
Xin, S., Wyman, O., & Alge, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800160 · Cited by 126 · cited 1×
“[37,38] used PEG-dithiol to link norbornene-grafted PEG microgels via thiol-ene click chemistry.”
MethodPolyak, B., Geresh, S., & Marks, R. S. (2004) · Biomacromolecules · doi:10.1021/bm034454a · Cited by 124
Interface‐Directed Self‐Assembly of Cell‐Laden Microgels
Zamanian, B., Masaeli, M., Nichol, J. W., Khabiry, M., Hancock, M. J., Bae, H., & Khademhosseini, A. (2010) · Small · doi:10.1002/smll.200902326 · Cited by 117 · cited 1×
“perflourodecalin) at liquid-air interface [68].”
Single-Cell Microgels: Technology, Challenges, and Applications
Kamperman, T., Karperien, M., Gac, S. L., & Leijten, J. (2018) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.03.001 · Cited by 111
Scott, E. A., Nichols, M. D., Kuntz-Willits, R., & Elbert, D. L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.009 · Cited by 99 · cited 2×
“To fabricate microgel assembly, microgels should be first generated via several techniques, such as batch emulsion [20], microfluidic emulsion [21], lithography [22], electrohydrodynamic spraying [23] and mechanical fragmentation [24].”
BackgroundMethodStem cell niche engineering through droplet microfluidics
Allazetta, S., & Lütolf, M. P. (2015) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2015.05.003 · Cited by 94 · cited 4×
“The threading of cucurbit [8]uril host molecules into highly branched polyrotaxane main chains with a first guest of viologen provided multiple host units in each macromolecular chain.”
BackgroundMethodInfluentialDirected self-assembly of microscale hydrogels by electrostatic interaction
Han, Y. L., Yang, Y., Liu, S., Wu, J., Chen, Y., Lu, T. J., & Xu, F. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035004 · Cited by 92 · cited 2×
“[50] created electrostatic potential on the surface of PEG microgels by copolymerizing PEG with positive poly(2-(methacryloyloxy) ethyltrimethylammonium chloride) and negative poly (2-acrylamido- 2-methyl-propane sulfonic acid sodium salt), respectively.”
MethodEmerging Technologies for Assembly of Microscale Hydrogels
Gurkan, U. A., Tasoglu, S., Kavaz, D., Demirel, M. C., & Demirci, U. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200011 · Cited by 92 · cited 3×
“Compared with the above-mentioned methods, microgel assembly driven by external driving forces, such as fluidic force, surface tension, magnetic and acoustic forces usually has no special requirements for microgel materials and thus avoids complicated synthesis steps, such as grafting the reactive functional groups on…”
BackgroundMethodInfluentialMilani, A. H., Freemont, A. J., Hoyland, J. A., Adlam, D. J., & Saunders, B. R. (2012) · Biomacromolecules · doi:10.1021/bm3007727 · Cited by 84
Imparato, G., Urciuolo, F., Casale, C., & Netti, P. A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.06.062 · Cited by 83 · cited 4×
“[62] packed gelatin microgels in disc shaped chambers and seeded fibroblasts onto them.”
BackgroundMethodInfluentialChitosan microparticles as injectable scaffolds for tissue engineering
Cruz, D. M. G., Ivirico, J. L. E., Gomes, M. M., Ribelles, J. L. G., Salmerón‐Sánchez, M., Reis, R. L., & Mano, J. F. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.106 · Cited by 83
DNA-templated assembly of droplet-derived PEG microtissues
Li, C. Y., Wood, D. K., Hsu, C. M., & Bhatia, S. N. (2011) · Lab on a Chip · doi:10.1039/c1lc20318e · Cited by 81 · cited 2×
“Assembling strategies for microgel assembly: (a) chemical reaction, including enzymatic catalysis (scale bar: N/A) [19], photo-induced radical polymerization (scale bar: 1 mm) [31], click chemistry (scale bar: 10 mm) [39] and non-enzymatic amidation reaction (scale bar: 1 mm) [43]; (b) physical reaction, including hos…”
MethodChiang, C., Fang, Y., Ho, C., Assunção, M., Lin, S., Wang, Y. C., Blocki, A. M., & Huang, C. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100024 · Cited by 80
Tong, X., & Yang, F. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701065 · Cited by 78 · cited 2×
“Unfortunately, traditional top-down approaches to engineer artificial tissues offer weak control over these 3D microstructures and their assembly, such as precisely positioning multi-type cells, achieving tissue-specific geometries and cell densities, incorporating vasculature throughout the 3D space [14].”
BackgroundJivan, F., Yegappan, R., Pearce, H. A., Carrow, J. K., McShane, M. J., Gaharwar, A. K., & Alge, D. L. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00990 · Cited by 77 · cited 1×
“This feature minimizes the possible toxicity effects of in situ polymerization chemistry such as ultraviolet light, radicals, and reactive nucleophiles, and is also valuable given the lengthy waiting times for slow crosslinking reaction [26,73].”
BackgroundCurrent advances in microsphere based cell culture and tissue engineering
He, Q., Zhang, J., Liao, Y., Alakpa, E. V., Bunpetch, V., Zhang, J., & Ouyang, H. (2019) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.107459 · Cited by 73 · cited 3×
“For the first category, cells are often pre-mixed evenly with hydrogel precursor solution, then the mixture is either photo-patterned or emulsified into microgels, and finally the crosslinked cell-laden microgels are assembled into macroscale constructs [13,40].”
BackgroundFeng, Q., Gao, H., Wen, H., Huang, H., Li, Q., Liang, M., Liu, Y., Dong, H., & Cao, X. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.046 · Cited by 73
Self-citationDirected Assembly and Development of Material‐Free Tissues with Complex Architectures
Vrij, E., Rouwkema, J., LaPointe, V. L. S., van Blitterswijk, C., Truckenmüller, R. K., & Rivron, N. C. (2016) · Advanced Materials · doi:10.1002/adma.201505723 · Cited by 70
Colloidal Gels with Tunable Mechanomorphology Regulate Endothelial Morphogenesis
Nair, S. K., Basu, S., Sen, B., Lin, M.-H., Kumar, A. N., Yuan, Y., Cullen, P. J., & Sarkar, D. (2019) · Scientific Reports · doi:10.1038/s41598-018-37788-w · Cited by 65 · cited 1×
“[53] showed that electrostatic interaction-mediated microgel assembly could be obtained using the same substance from different sources (e.”
BackgroundMa, T., Gao, X., Dong, H., He, H., & Cao, X. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.01.007 · Cited by 64
Self-citationXie, W., Fu, X., Tang, F., Mo, Y., Cheng, J., Wang, H., & Chen, X. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb02938e · Cited by 62
Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions
Romanazzo, S., Molley, T. G., Nemec, S. R., Lin, K., Sheikh, R. H., Gooding, J. J., Wan, B., Li, Q., Kilian, K. A., & Roohani, I. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008216 · Cited by 62 · cited 2×
“[87] show human osseous labyrinth printed by ceramic omnidirectional bioprinting in cell-suspensions (COBICS) which used α-tricalcium phosphate (α-TCP) suspension as ceramic-based ink and a gelatin microgel suspension containing live cells as support medium (scale bar: 3 mm).”
BackgroundMethodSelf-citationReversible Programing of Soft Matter with Reconfigurable Mechanical Properties
He, H., Cao, X., Dong, H., Ma, T., & Payne, G. F. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605665 · Cited by 62 · cited 2×
“For example, biophysical properties of a hydrogel, such as water content, mechanical strength and viscoelasticity, can be tailored by controlling the macromer composition, concentration and crosslinking density [4,5].”
BackgroundSelf-citationCai, B., Zou, Q., Zuo, Y., Mei, Q., Ma, J., Lin, L., Chen, L., & Li, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06648 · Cited by 60 · cited 3×
“[52] synthesized chitosan microgels with positive charge (-NH3) and O-carboxymethyl chitosan microgels with negative charge (-COO-) for assembling.”
BackgroundInfluentialSupramolecular Nested Microbeads as Building Blocks for Macroscopic Self‐Healing Scaffolds
Yu, Z., Liu, J., Tan, C. S. Y., Scherman, O. A., & Abell, C. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711522 · Cited by 57
Effect of particle size and charge on the network properties of microsphere-based hydrogels
Tomme, S. R. V., van Nostrum, C. F., Dijkstra, M., Smedt, S. C. D., & Hennink, W. E. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2008.05.013 · Cited by 54 · cited 2×
“Tomme’s team [51] incorporated methacrylic acid or dimethylaminoethyl methacrylate into methacrylate-derivatized dextran, resulting in negatively or positively charged microgels at physiological pH.”
BackgroundRoam, J. L., Yan, Y., Nguyen, P. K., Kinstlinger, I. S., Leuchter, M. K., Hunter, D. A., Wood, M. D., & Elbert, D. L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.054 · Cited by 47
Diels–Alder Click-Based Hydrogels for Direct Spatiotemporal Postpatterning via Photoclick Chemistry
Yu, F., Cao, X., Li, Y., & Chen, X. (2015) · ACS Macro Letters · doi:10.1021/mz5007427 · Cited by 42 · cited 1×
“For example, biophysical properties of a hydrogel, such as water content, mechanical strength and viscoelasticity, can be tailored by controlling the macromer composition, concentration and crosslinking density [4,5].”
BackgroundSelf-citationGansau, J., Kelly, L., & Buckley, C. T. (2018) · Biofabrication · doi:10.1088/1758-5090/aacb95 · Cited by 41 · cited 1×
“To fabricate microgel assembly, microgels should be first generated via several techniques, such as batch emulsion [20], microfluidic emulsion [21], lithography [22], electrohydrodynamic spraying [23] and mechanical fragmentation [24].”
MethodYao, M., Yang, J., Song, J., Zhao, D., Du, M.-S., Zhao, Y., & Лю, Б. (2014) · Chemical Communications · doi:10.1039/c4cc04018j · Cited by 32 · cited 1×
“[57] created large porous cell-laden constructs through self-assembly of the coiled-coil polypeptide in PEG-based microgels.”
BackgroundZhang, F., Li, Q., Lin, Z., Ma, L., Xu, S., Feng, Q., Dong, H., Zhang, Y., & Cao, X. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00569a · Cited by 24
Self-citationTan, W. S., Shi, Q., Chen, S., Juhari, M. A. B., & Song, J. (2020) · Biomedical Engineering Letters · doi:10.1007/s13534-020-00173-6 · Cited by 17
Cited by
Application of hydrogels in cancer immunotherapy: a bibliometric analysis
Liu, X., Zhou, Q., Yang, Y., & Chen, E. (2024) · Frontiers in Immunology · doi:10.3389/fimmu.2024.1433050 · Cited by 7
Metadata
- Authors
- Feng, Q., Li, D., Li, Q., Cao, X., & Dong, H.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2022-03
- Volume
- 9
- Pages
- 105-119
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W3186451657
- Cited by
- 197
- References
- 87
- FWCI
- 8.18
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.