The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Open accessAbstract
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze casting can be applied to synthesize porous scaffolds exhibiting unusually high compressive strength, e.g. up to 145 MPa for 47% porosity and 65 MPa for 56% porosity. The materials are characterized by well-defined pore connectivity along with directional and completely open porosity. Various parameters affecting the porosity and compressive strength have been investigated, including initial slurry concentration, freezing rate, and sintering conditions. The implications and potential application as bone substitute are discussed. These results might open the way for hydroxyapatite-based materials designed for load-bearing applications. The biological response of these materials is yet to be tested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomechanics. Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1982) · Journal of Applied Mechanics · doi:10.1115/1.3162171 · Cited by 6,025
Biomechanics: Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1981) · Journal of Biomechanical Engineering · doi:10.1115/1.3138285 · Cited by 2,769
Osteoblast adhesion on biomaterials
Anselme, K. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00242-2 · Cited by 2,500
Suchanek, W., & Yoshimura, M. (1998) · Journal of Materials Research · doi:10.1557/jmr.1998.0015 · Cited by 2,028
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Self-citationPorous chitosan scaffolds for tissue engineering
Madihally, S. V., & Matthew, H. W. T. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00011-3 · Cited by 1,583
Zhang, R., & Ma, P. X. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990315)44:4<446::aid-jbm11>3.0.co;2-f · Cited by 890
Pore Size of Porous Hydroxyapatite as the Cell-Substratum Controls BMP-Induced Osteogenesis
Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., & Kuboki, Y. (1997) · Journal of Biochemistry · doi:10.1093/oxfordjournals.jbchem.a021589 · Cited by 706
In vitro characterization of chitosan–gelatin scaffolds for tissue engineering
Huang, Y., Onyeri, S., Siewe, M., Moshfeghian, A., & Madihally, S. V. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.036 · Cited by 656
Osteoconduction at porous hydroxyapatite with various pore configurations
Chang, B.-S., Lee, >. K. >.-K., Hong, K.-S., Youn, H.-J., Ryu, H.-S., Chung, S.-S., & Park, K.-W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00030-2 · Cited by 635
Cited by
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Bioactive glass in tissue engineering
Rahaman, M. N., Day, D. E., Sonny Bal, B., Fu, Q., Jung, S. B., Bonewald, L. F., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.016 · Cited by 1,794
Self-citationNavarro, M., Michiardi, A., Castaño, O., & Planell, J. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0151 · Cited by 1,513
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Bioceramics of calcium orthophosphates
Dorozhkin, S. V. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.050 · Cited by 1,338
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Self-citationShao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Calcium Orthophosphates in Nature, Biology and Medicine
Dorozhkin, S. V. (2009) · Materials · doi:10.3390/ma2020399 · Cited by 823
Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
Huang, L. J., Geng, L., & Peng, H.-X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.002 · Cited by 788
Ice-templated porous alumina structures
Deville, S., Saiz, E., & Tomsia, A. P. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.11.003 · Cited by 769
Self-citationCeramics for medical applications: A picture for the next 20 years
Chevalier, J., & Gremillard, L. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.08.025 · Cited by 754
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Self-citationA review of bioactive glasses: Their structure, properties, fabrication and apatite formation
Kaur, G., Pandey, O. P., Singh, K., Homa, D., Scott, B., & Pickrell, G. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34690 · Cited by 628
Cell proliferation and migration in silk fibroin 3D scaffolds
Mandal, B. B., & Kundu, S. C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.02.006 · Cited by 583
Schwieger, W., Machoke, A. G., Weissenberger, T., Inayat, A., Selvam, T., Klumpp, M., & Inayat, A. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00599j · Cited by 575
Dorozhkin, S. V. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1467-8 · Cited by 573
Processing and properties of advanced porous ceramics: An application based review
Hammel, E. C., Ighodaro, O. L.-R., & Okoli, O. I. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.06.095 · Cited by 563
How smart do biomaterials need to be? A translational science and clinical point of view
Holzapfel, B. M., Reichert, J. C., Schantz, J.-T., Gbureck, U., Rackwitz, L., Nöth, U., Jakob, F., Rudert, M., Groll, J., & Hutmacher, D. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.009 · Cited by 552
Bioinspired large-scale aligned porous materials assembled with dual temperature gradients
Bai, H., Chen, Y., Delattre, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Science Advances · doi:10.1126/sciadv.1500849 · Cited by 483
Self-citationBioactive polymeric scaffolds for tissue engineering
Stratton, S., Shelke, N. B., Hoshino, K., Rudraiah, S., & Kumbar, S. G. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.11.001 · Cited by 469
“A temperature of 1325 °C was found to be an ideal sintering temperature in order to achieve an ideal, smaller grain size without compromised porosity [172].”
Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method
Wu, X., Liu, Y., Li, X., Wen, P., Zhang, Y., Long, Y., Wang, X., Guo, Y., Xing, F., & Gao, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.041 · Cited by 457
Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2008) · Chemistry of Materials · doi:10.1021/cm702028z · Cited by 450
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Jakus, A. E., Rutz, A. L., Jordan, S. W., Kannan, A., Mitchell, S. M., Yun, C., Koube, K. D., Yoo, S. C., Whiteley, H. E., Richter, C.-P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf7704 · Cited by 396
Roohani-Esfahani, S.-I., Newman, P., & Zreiqat, H. (2016) · Scientific Reports · doi:10.1038/srep19468 · Cited by 380
Aligned Porous Structures by Directional Freezing
Zhang, H., & Cooper, A. I. (2007) · Advanced Materials · doi:10.1002/adma.200700154 · Cited by 379
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Biomaterials by freeze casting
Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0014 · Cited by 375
Freeze casting of porous materials: review of critical factors in microstructure evolution
Li, W. L., Lu, K., & Walz, J. Y. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000011 · Cited by 372
Freeze-Casting of Porous Biomaterials: Structure, Properties and Opportunities
Deville, S. (2010) · Materials · doi:10.3390/ma3031913 · Cited by 308
Self-citationFu, Q., Rahaman, M. N., Sonny Bal, B., Brown, R. F., & Day, D. E. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.019 · Cited by 302
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Self-citationCalcium Orthophosphate-Based Bioceramics
Dorozhkin, S. (2013) · Materials · doi:10.3390/ma6093840 · Cited by 295
3D printed bone tissue regenerative PLA/HA scaffolds with comprehensive performance optimizations
Zhang, B., Wang, L., Song, P., Pei, X., Sun, H., Wu, L., Zhou, C., Wang, K., Fan, Y., & Zhang, X. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109490 · Cited by 285
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Calcium Orthophosphates as Bioceramics: State of the Art
Dorozhkin, S. V. (2010) · Journal of Functional Biomaterials · doi:10.3390/jfb1010022 · Cited by 278
Zhai, M., Zhu, Y., Yang, M., & Mao, C. (2020) · Advanced Science · doi:10.1002/advs.202001334 · Cited by 277
Valorisation of natural extracts from marine source focused on marine by-products: A review
Ferraro, V., Cruz, I. B., Jorge, R. F., Malcata, F. X., Pintado, M. E., & Castro, P. M. L. (2010) · Food Research International · doi:10.1016/j.foodres.2010.07.034 · Cited by 274
Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating
Munch, E., Saiz, E., Tomsia, A. P., & Deville, S. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03087.x · Cited by 274
Self-citationDirect Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Bioinspired Strong and Highly Porous Glass Scaffolds
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002030 · Cited by 252
Self-citationXia, Z., Yu, X., Jiang, X., Brody, H. D., Rowe, D. W., & Wei, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.038 · Cited by 178
Sionkowska, A., & Kaczmarek, B. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.196 · Cited by 57
Semyari, H., Salehi, M., Taleghani, F., Ehterami, A., Bastami, F., Jalayer, T., Semyari, H., Hamed Nabavi, M., & Semyari, H. (2018) · Journal of Biomaterials Applications · doi:10.1177/0885328218805229 · Cited by 45
Monmaturapoj, N., Soodsawang, W., & Thepsuwan, W. (2012) · Journal of Porous Materials · doi:10.1007/s10934-011-9492-7 · Cited by 31
Research Progress and Applications of Silica-Based Aerogels—A Bibliometric Analysis
Ji, C., Zhu, S., Zhang, E., Li, W., Liu, Y., Zhang, W., Su, C., Gu, Z., & Zhang, H. (2022) · RSC Advances · doi:10.1039/d2ra01511k · Cited by 20
Metadata
- Authors
- Deville, S., Saiz, E., & Tomsia, A. P.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2006-11
- Volume
- 27
- Issue
- 32
- Pages
- 5480-5489
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2036978569
- Cited by
- 873
- References
- 50
- FWCI
- 22.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.