The DOI matches its Crossref record; 146 of the 146 references it cites were found in a registry or an index.
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Open accessAbstract
One of the critical issues in orthopaedic regenerative medicine is the design of bone scaffolds and implants that replicate the biomechanical properties of the host bones. Porous metals have found themselves to be suitable candidates for repairing or replacing the damaged bones since their stiffness and porosity can be adjusted on demands. Another advantage of porous metals lies in their open space for the in-growth of bone tissue, hence accelerating the osseointegration process. The fabrication of porous metals has been extensively explored over decades, however only limited controls over the internal architecture can be achieved by the conventional processes. Recent advances in additive manufacturing have provided unprecedented opportunities for producing complex structures to meet the increasing demands for implants with customized mechanical performance. At the same time, topology optimization techniques have been developed to enable the internal architecture of porous metals to be designed to achieve specified mechanical properties at will. Thus implants designed via the topology optimization approach and produced by additive manufacturing are of great interest. This paper reviews the state-of-the-art of topological design and manufacturing processes of various types of porous metals, in particular for titanium alloys, biodegradable metals and shape memory alloys. This review also identifies the limitations of current techniques and addresses the directions for future investigations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations
Osher, S., & Sethian, J. A. (1988) · Journal of Computational Physics · doi:10.1016/0021-9991(88)90002-2 · Cited by 14,062
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Asymptotic Analysis for Periodic Structures
Bensoussan, A., Lions, J. L., & Papanicolaou, G. (2011) · American Mathematical Society eBooks · doi:10.1090/chel/374 · Cited by 4,523
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Manufacture, characterisation and application of cellular metals and metal foams
Banhart, J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00002-5 · Cited by 3,780
Non-Homogeneous Media and Vibration Theory
(1980) · Lecture Notes in Physics · doi:10.1007/3-540-10000-8 · Cited by 3,637
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Self-citationLaser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
Self-citationMechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
The COC algorithm, Part II: Topological, geometrical and generalized shape optimization
Zhou, M., & Rozvany, G. I. N. (1991) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(91)90046-9 · Cited by 1,827
Asymptotic Analysis for Periodic Structures
(1978) · Studies in Mathematics and Its Applications · doi:10.1016/s0168-2024(08)x7015-8 · Cited by 1,782
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Design and mechanical properties of new β type titanium alloys for implant materials
Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00808-3 · Cited by 1,323
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements
Rho, J. Y., Ashman, R. B., & Turner, C. H. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90042-d · Cited by 1,283
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Self-citationEffect of Low-Temperature Phase Changes on the Mechanical Properties of Alloys near Composition TiNi
Buehler, W. J., Gilfrich, J. V., & Wiley, R. C. (1963) · Journal of Applied Physics · doi:10.1063/1.1729603 · Cited by 1,151
Bones: Structure and Mechanics
Currey, J. D. (2002) · Cited by 1,125
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Manufacturing and processing of NiTi implants: A review
Elahinia, M. H., Hashemi, M., Tabesh, M., & Bhaduri, S. B. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.11.001 · Cited by 1,067
Design of materials with extreme thermal expansion using a three-phase topology optimization method
Sigmund, O., & Torquato, S. (1997) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(96)00114-7 · Cited by 1,054
Preparation of bioactive Ti and its alloys via simple chemical surface treatment
Kim, H.-M., Miyaji, F., Kokubo, T., & Nakamura, T. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199611)32:3<409::aid-jbm14>3.0.co;2-b · Cited by 1,005
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960
Metal Sensitivity in Patients with Orthopaedic Implants
Hallab, N., Merritt, K., & Jacobs, J. J. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200103000-00017 · Cited by 935
Erbel, R., Di Mario, C., Bartunek, J., Bonnier, J., de Bruyne, B., Eberli, F. R., Erne, P., Haude, M., Heublein, B., Horrigan, M., et al. (2007) · The Lancet · doi:10.1016/s0140-6736(07)60853-8 · Cited by 907
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Zberg, B., Uggowitzer, P. J., & Löffler, J. F. (2009) · Nature Materials · doi:10.1038/nmat2542 · Cited by 899
Medical shape memory alloy applications—the market and its products
Morgan, N. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.326 · Cited by 838
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
A new look at biomedical Ti-based shape memory alloys
Biesiekierski, A., Wang, J., Gepreel, M. A.-H., & Wen, C. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.018 · Cited by 688
Billings, H. J. (2019) · The Research Repository @ WVU (West Virginia University) · Cited by 662
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Tissue Engineering by Cell Transplantation Using Degradable Polymer Substrates
Cima, L. G., Vacanti, J. P., Vacanti, C., Ingber, D., Mooney, D., & Langer, R. (1991) · Journal of Biomechanical Engineering · doi:10.1115/1.2891228 · Cited by 595
Biomedical Applications of Shape Memory Alloys
Petrini, L., & Migliavacca, F. (2011) · Journal of Metallurgy · doi:10.1155/2011/501483 · Cited by 585
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta
Peuster, M., Hesse, C., Schloo, T., Fink, C., Beerbaum, P., & von Schnakenburg, C. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.029 · Cited by 558
Tailoring materials with prescribed elastic properties
Sigmund, O. (1995) · Mechanics of Materials · doi:10.1016/0167-6636(94)00069-7 · Cited by 538
Choi, K., Kuhn, J. L., Ciarelli, M. J., & Goldstein, S. A. (1990) · Journal of Biomechanics · doi:10.1016/0021-9290(90)90003-l · Cited by 532
Nickel and molybdenum contact allergies in patients with coronary in-stent restenosis
Köster, R., Vieluf, D., Kiehn, M., Sommerauer, M., Kähler, J., Baldus, S., Meinertz, T., & Hamm, C. W. (2000) · The Lancet · doi:10.1016/s0140-6736(00)03262-1 · Cited by 530
Evolutionary Topology Optimization of Continuum Structures: Methods and Applications
Huang, X., & Xie, Y. M. (2010) · Cited by 525
Self-citationWindhagen, H., Radtke, K., Weizbauer, A., Diekmann, J., Noll, Y., Kreimeyer, U., Schavan, R., Stukenborg-Colsman, C., & Waizy, H. (2013) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-12-62 · Cited by 521
Balla, V. K., Bodhak, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.046 · Cited by 504
Calignano, F. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.07.043 · Cited by 486
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
Kranz, J., Herzog, D., & Emmelmann, C. (2015) · Journal of Laser Applications · doi:10.2351/1.4885235 · Cited by 470
Van Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., & Kruth, J. P. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.045 · Cited by 452
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
The Design of Scaffolds for Use in Tissue Engineering
Qomi, T., Kalhor, N., & Fazaeli, H. (2014) · Cited by 443
Negative refractive index due to chirality
Zhou, J., Dong, J., Wang, B., Koschny, T., Kafesaki, M., & Soukoulis, C. M. (2009) · Physical Review B · doi:10.1103/physrevb.79.121104 · Cited by 441
Kuboki, Y., Jin, Q., & Takita, H. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200100002-00005 · Cited by 433
Development and characterization of Ni-free Ti-base shape memory and superelastic alloys
Miyazaki, S., Kim, H. Y., & HOSODA, H. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.02.054 · Cited by 416
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Scaffold Design and Manufacturing: From Concept to Clinic
Hollister, S. J. (2009) · Advanced Materials · doi:10.1002/adma.200802977 · Cited by 408
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Bio-CAD modeling and its applications in computer-aided tissue engineering
Sun, W., Starly, B., Nam, J., & Darling, A. (2005) · Computer-Aided Design · doi:10.1016/j.cad.2005.02.002 · Cited by 386
Lin, C. Y., Kikuchi, N., & Hollister, S. J. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.09.029 · Cited by 384
Pattanayak, D. K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., Nishida, N., Nakamura, T., & Kokubo, T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.034 · Cited by 384
Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits
Itälä, A. I., Ylänen, H. O., Ekholm, C., Karlsson, K. H., & Aro, H. T. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1069 · Cited by 379
3D modeling, custom implants and its future perspectives in craniofacial surgery
Parthasarathy, J. (2014) · Annals of Maxillofacial Surgery · doi:10.4103/2231-0746.133065 · Cited by 377
Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Pattanayak, D. K., Matsushita, T., Sasaki, K., Nishida, N., Kokubo, T., et al. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.037 · Cited by 368
Sintering of commercially pure titanium powder with a Nd:YAG laser source
Fischer, P., Romano, V., Weber, H. P., Karapatis, N. P., Boillat, É., & Glardon, R. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00567-0 · Cited by 365
Leary, M., Merli, L., Torti, F., et al. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 363
Self-citationTissue Engineering: The Challenges Ahead
Langer, R. S., & Vacanti, J. P. (1999) · Scientific American · doi:10.1038/scientificamerican0499-86 · Cited by 362
Haberland, C., Elahinia, M., Walker, J. M., Meier, H., & Frenzel, J. A. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/10/104002 · Cited by 355
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Ryan, G. E., Pandit, A. S., & Apatsidis, D. P. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.05.032 · Cited by 340
Stevens, B., Yang, Y., Mohandas, A., Stucker, B., & Nguyen, K. T. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30962 · Cited by 326
The effect of heat treatment on bone-bonding ability of alkali-treated titanium
Nishiguchi, S., Nakamura, T., Kobayashi, M., Kim, H.-M., Miyaji, F., & Kokubo, T. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)90203-4 · Cited by 323
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Biodegradable magnesium scaffolds: Part II: Peri‐implant bone remodeling
Witte, F., Ulrich, H., Palm, C., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31293 · Cited by 312
Porous scaffold design using the distance field and triply periodic minimal surface models
Yoo, D. J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.019 · Cited by 298
Bone regeneration performance of surface-treated porous titanium
Amin Yavari, S., van der Stok, J., Chai, Y. C., Wauthle, R., Tahmasebi Birgani, Z., Habibovic, P., Mulier, M., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.054 · Cited by 297
Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces
Yoo, D.-J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0008-9 · Cited by 271
Bones: Structure and mechanics
Marzke, M. W. (2003) · American Journal of Human Biology · doi:10.1002/ajhb.10145 · Cited by 266
Microstructure of selective laser melted nickel–titanium
Bormann, T., Müller, B., Schinhammer, M., Kessler, A., Thalmann, P., & de Wild, M. (2014) · Materials Characterization · doi:10.1016/j.matchar.2014.05.017 · Cited by 261
Metals for bone implants. Part 1. Powder metallurgy and implant rendering
Andani, M. T., Shayesteh Moghaddam, N., Haberland, C., Dean, D., Miller, M. J., & Elahinia, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.025 · Cited by 258
Hostings, G. W. (1981) · Journal of Biomedical Engineering · doi:10.1016/0141-5425(81)90116-3 · Cited by 253
Cheah, C. M., Chua, C. K., Leong, K. F., & Chua, S. W. (2003) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700300034 · Cited by 243
Essentials of 3D Biofabrication and Translation
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-18665-5 · Cited by 234
Wang, D., Yang, Y., Liu, R., Xiao, D., & Sun, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.05.001 · Cited by 229
Porous Biodegradable Metals for Hard Tissue Scaffolds: A Review
Yusop, A. H., Bakir, A. A., Shaharom, N. A., Abdul Kadir, M. R., & Hermawan, H. (2012) · International Journal of Biomaterials · doi:10.1155/2012/641430 · Cited by 225
Bone and metal: An orthopaedic perspective on osseointegration of metals
Goriainov, V., Cook, R., M. Latham, J., G. Dunlop, D., & Oreffo, R. O. C. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.004 · Cited by 223
Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., & Loh, Y. T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.024 · Cited by 220
An image-based approach for designing and manufacturing craniofacial scaffolds
Hollister, S. J., Levy, R. A., Chu, T.-M., Halloran, J. W., & Feinberg, S. E. (2000) · International Journal of Oral and Maxillofacial Surgery · doi:10.1034/j.1399-0020.2000.290115.x · Cited by 219
On design of multi-functional microstructural materials
Cadman, J. E., Zhou, S., Chen, Y., & Li, Q. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-6643-4 · Cited by 215
Self-citationThe biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting
Habijan, T., Haberland, C., Meier, H., Frenzel, J., Wittsiepe, J., Wuwer, C., Greulich, C., Schildhauer, T. A., & Köller, M. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.09.008 · Cited by 206
Redesign and cost estimation of rapid manufactured plastic parts
Atzeni, E., Iuliano, L., Minetola, P., & Salmi, A. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011065704 · Cited by 205
Level set topology optimization of fluids in Stokes flow
Challis, V. J., & Guest, J. K. (2009) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2616 · Cited by 205
Lin, C., Wirtz, T., LaMarca, F., & Hollister, S. J. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31231 · Cited by 198
Feedback control of selective laser melting
Kruth, J., Mercelis, P., Vaerenbergh, J. V., & Craeghs, T. (2007) · Lirias (KU Leuven) · Cited by 192
Principles of Anatomy and Physiology
Meskell, M. (2010) · Journal of Anatomy · doi:10.1111/j.1469-7580.2010.01292.x · Cited by 190
Bai, F., Wang, Z., Lu, J., Liu, J., Chen, G., Lv, R., Wang, J., Lin, K., Zhang, J., & Huang, X. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0148 · Cited by 184
Whole Bone Mechanics and Bone Quality
Cole, J. H., & van der Meulen, M. C. H. (2011) · Clinical Orthopaedics & Related Research · doi:10.1007/s11999-011-1784-3 · Cited by 169
Microstructure design of biodegradable scaffold and its effect on tissue regeneration
Chen, Y., Zhou, S., & Li, Q. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.03.064 · Cited by 164
Self-citationWhole bone mechanics and mechanical testing
Sharir, A., Barak, M. M., & Shahar, R. (2008) · The Veterinary Journal · doi:10.1016/j.tvjl.2007.09.012 · Cited by 159
Biocompatibility of implant materials
Williams, D. F. (1976) · Medical Entomology and Zoology · Cited by 158
Fabrication of customised scaffolds using computer‐aided design and rapid prototyping techniques
Naing, M. W., Chua, C. K., Leong, K. F., & Wang, Y. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612938 · Cited by 152
Cheah, C. M., Chua, C. K., Leong, K. F., & Chua, S. W. (2003) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700300035 · Cited by 145
Bobe, K., Willbold, E., Morgenthal, I., Andersen, O., Studnitzky, T., Nellesen, J., Tillmann, W., Vogt, C., Vano‐Herrera, K., & Witte, F. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.035 · Cited by 144
Future directions in biomaterials
Langer, R., Griffith, L. G., Tamada, J. A., & Wintermantel, E. (1990) · Biomaterials · doi:10.1016/0142-9612(90)90038-r · Cited by 144
Challis, V. J., Roberts, A. P., Grotowski, J. F., Zhang, L., & Sercombe, T. B. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000154 · Cited by 134
Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Yamaguchi, S., Kizuki, T., Matsushita, T., Niinomi, M., Kokubo, T., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.026 · Cited by 134
Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery
Jardini, A. L., Larosa, M. A., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Kharmandayan, P., Calderoni, D. R., & Filho, R. M. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.900857 · Cited by 131
Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
Brandl, E., & Greitemeier, D. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.04.116 · Cited by 121
Mullen, L., Stamp, R. C., Fox, P., Jones, E., Ngo, C., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31504 · Cited by 121
Computed tomography‐based tissue‐engineered scaffolds in craniomaxillofacial surgery
Smith, M. H., Flanagan, C. L., Kemppainen, J. M., Sack, J., Chung, H., Das, S., Hollister, S. J., & Feinberg, S. E. (2007) · International Journal of Medical Robotics and Computer Assisted Surgery · doi:10.1002/rcs.143 · Cited by 120
Accurate measurement of cortical bone elasticity tensor with resonant ultrasound spectroscopy
Bernard, S., Grimal, Q., & Laugier, P. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.09.017 · Cited by 118
On stiffness of scaffolds for bone tissue engineering—a numerical study
Sturm, S., Zhou, S., Mai, Y., & Li, Q. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.02.020 · Cited by 103
Self-citationAutomatic Algorithm for Generating Complex Polyhedral Scaffold Structures for Tissue Engineering
Cheah, C. M., Chua, C. K., Leong, K. F., Cheong, C.-H., & Naing, M.-W. (2004) · Tissue Engineering · doi:10.1089/107632704323061951 · Cited by 101
Zhuravleva, K., Bönisch, M., Prashanth, K. G., Hempel, U., Helth, A., Gemming, T., Calin, M., Scudino, S., Schultz, L., Eckert, J., et al. (2013) · Materials · doi:10.3390/ma6125700 · Cited by 100
Zhang, Z., Jones, D. H., Yue, S., Lee, P. D., Jones, J. R., Sutcliffe, C. J., & Jones, E. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.05.050 · Cited by 96
Lin, C.-Y., Hsiao, C., Chen, P.-Q., & Hollister, S. J. (2004) · Spine · doi:10.1097/01.brs.0000134573.14150.1a · Cited by 92
Scaffold Library for Tissue Engineering: A Geometric Evaluation
Chantarapanich, N., Puttawibul, P., Sucharitpwatskul, S., Jeamwatthanachai, P., Inglam, S., & Sitthiseripratip, K. (2012) · Computational and Mathematical Methods in Medicine · doi:10.1155/2012/407805 · Cited by 85
Synthesis and properties of topologically ordered porous magnesium
Kirkland, N. T., Kolbeinsson, I., Woodfield, T. B. F., Dias, G. J., & Staiger, M. P. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.04.006 · Cited by 78
Melvin, J. W. (1993) · Journal of Biomechanical Engineering · doi:10.1115/1.2895538 · Cited by 76
Peri- and intra-implant bone response to microporous Ti coatings with surface modification
Braem, A., Chaudhari, A., Cardoso, M. V., Schrooten, J., Duyck, J. A. J., & Vleugels, J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.017 · Cited by 76
Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction
Becker, S. T., Bolte, H., Krapf, O., et al. (2009) · Oral Oncology · doi:10.1016/j.oraloncology.2009.07.004 · Cited by 72
Chai, Y. C., Kerckhofs, G., Roberts, S. J., Bael, S. V., Schepers, E., Vleugels, J., Luyten, F. P., & Schrooten, J. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.02.026 · Cited by 71
A level-set procedure for the design of electromagnetic metamaterials
Zhou, S., Li, W., Sun, G., & Li, Q. (2010) · Optics Express · doi:10.1364/oe.18.006693 · Cited by 70
Self-citationXiao, D., Yang, Y., Su, X., Wang, D., & Sun, J. (2013) · Bio-Medical Materials and Engineering · doi:10.3233/bme-130765 · Cited by 51
Lewandrowski, K., Gresser, J. D., Bondre, S., Silva, A. E., Wise, D. L., & Trantolo, D. J. (2000) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856200744075 · Cited by 47
Rapid prototyped porous nickel–titanium scaffolds as bone substitutes
Hoffmann, W., Bormann, T., Rossi, A. M., Müller, B., Schumacher, R., Martín, I., de Wild, M., & Wendt, D. J. (2014) · Journal of Tissue Engineering · doi:10.1177/2041731414540674 · Cited by 45
Brie, I. C., Şoriţău, O., Dîrzu, N., Berce, C., Vulpoi, A., Popa, C. O., Todea, M., Şimon, S., Perde‐Schrepler, M., Virág, P., et al. (2014) · Journal of Biological Engineering · doi:10.1186/1754-1611-8-14 · Cited by 40
Computer Aided Tissue Engineering for Modeling and Design of Novel Tissue Scaffolds
Nam, J., Starly, B., Darling, A., & Sun, W. (2004) · Computer-Aided Design and Applications · doi:10.1080/16864360.2004.10738308 · Cited by 29
Markwardt, J., Friedrichs, J., Werner, C., Davids, A., Weise, H., Lesche, R., Weber, A., Range, U., Meißner, H., Lauer, G., et al. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34824 · Cited by 14
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Kaur, M., & Singh, K. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.04.064 · Cited by 1,451
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Metadata
- Authors
- Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-03
- Volume
- 83
- Pages
- 127-141
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2230487954
- Cited by
- 2,121
- References
- 146
- FWCI
- 145.78
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.