The DOI matches its Crossref record; 168 of the 168 references it cites were found in a registry or an index.
Biomedical production of implants by additive electro-chemical and physical processes
Abstract
Biomanufacturing integrates life science and engineering fundamentals to produce biocompatible products enhancing the quality of life. The state-of-the-art of this rapidly evolving manufacturing sector is presented and discussed, in particular the additive electrical, chemical and physical processes currently being applied to produce synthetic and biological parts. This fabrication strategy is strongly material-dependent, so the main classes of biomaterials are detailed. It is explained the potential to process composite materials combining synthetic and biological materials, such as cells, proteins and growth factors, as well the interdependences between materials and processes. The techniques commonly used to increase the bioactivity of clinical implants and improve the interface characteristics between biological tissues and implants are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
(2013) · doi:10.1016/c2009-0-02433-7 · Cited by 5,127
Bioceramics: From Concept to Clinic
Hench, L. L. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb07132.x · Cited by 4,977
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Electrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
An Introduction to Bioceramics
Hench, L. L., & Wilson, J. (1993) · WORLD SCIENTIFIC eBooks · doi:10.1142/2028 · Cited by 2,307
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Decellularization of tissues and organs
Gilbert, T. W., Sellaro, T. L., & Badylak, S. F. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.014 · Cited by 2,222
State of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
Use of electrospinning technique for biomedical applications
Agarwal, S., Wendorff, J. H., & Greiner, A. (2008) · Polymer · doi:10.1016/j.polymer.2008.09.014 · Cited by 1,822
Extracellular matrix as a biological scaffold material: Structure and function
BADYLAK, S., FREYTES, D., & GILBERT, T. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.09.013 · Cited by 1,671
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
Plasma-surface modification of biomaterials
Chu, P. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00004-9 · Cited by 1,578
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Biomaterials: Where We Have Been and Where We Are Going
Ratner, B. D., & Bryant, S. J. (2004) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.6.040803.140027 · Cited by 1,507
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Self-citationElectrospun nanofibers: solving global issues
Ramakrishna, S., Fujihara, K., Teo, W.-E., Yong, T., Ma, Z., & Ramaseshan, R. (2006) · Materials Today · doi:10.1016/s1369-7021(06)71389-x · Cited by 1,418
The future of dental devices is digital
van Noort, R. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.014 · Cited by 1,408
Colloidal Processing of Ceramics
Lewis, J. A. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01560.x · Cited by 1,371
Reprint of: Extracellular matrix as a biological scaffold material: Structure and function
Badylak, S. F., Freytes, D. O., & Gilbert, T. W. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.016 · Cited by 1,362
Bioceramics of calcium orthophosphates
Dorozhkin, S. V. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.050 · Cited by 1,338
Role of material surfaces in regulating bone and cartilage cell response
Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331
The effect of pore size on cell adhesion in collagen-GAG scaffolds
O’Brien, F. J., Harley, B. A., Yannas, I. V., & Gibson, L. J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.052 · Cited by 1,329
Biodegradable synthetic polymers: Preparation, functionalization and biomedical application
Tian, H., Tang, Z., Zhuang, X., Chen, X., & Jing, X. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.004 · Cited by 1,293
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Self-citationVascularization in tissue engineering
Rouwkema, J., Rivron, N. C., & van Blitterswijk, C. A. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2008.04.009 · Cited by 1,211
Nanofiber technology: Designing the next generation of tissue engineering scaffolds
Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., & Bowlin, G. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.022 · Cited by 1,141
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
Manufacturing and processing of NiTi implants: A review
Elahinia, M. H., Hashemi, M., Tabesh, M., & Bhaduri, S. B. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.11.001 · Cited by 1,067
Material fundamentals and clinical performance of plasma‐sprayed hydroxyapatite coatings: A review
Sun, L., Berndt, C. C., Gross, K. A., & Kucuk, A. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1056 · Cited by 1,065
Three-Dimensional Cell Culture Matrices: State of the Art
Lee, J., Cuddihy, M. J., & Kotov, N. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0150 · Cited by 1,047
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Hutmacher, D. W., Schantz, J. T., Lam, C. X. F., Tan, K. C., & Lim, T. C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.24 · Cited by 1,007
Preparation of bioactive Ti and its alloys via simple chemical surface treatment
Kim, H.-M., Miyaji, F., Kokubo, T., & Nakamura, T. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199611)32:3<409::aid-jbm14>3.0.co;2-b · Cited by 1,005
Biomedical applications of titanium and its alloys
Elias, C. N., Lima, J. H. C., Valiev, R., & Meyers, M. A. (2008) · JOM · doi:10.1007/s11837-008-0031-1 · Cited by 983
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Self-citationSiow, K. S., Britcher, L., Kumar, S., & Griesser, H. J. (2006) · Plasma Processes and Polymers · doi:10.1002/ppap.200600021 · Cited by 972
Recent advances in polymer shape memory
Xie, T. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.003 · Cited by 870
Medical shape memory alloy applications—the market and its products
Morgan, N. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.326 · Cited by 838
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis
Sung, H.-J., Meredith, C., Johnson, C., & Galis, Z. S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.066 · Cited by 804
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Chronakis, I. S. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.053 · Cited by 757
Developing bioactive composite materials for tissue replacement
Wang, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00037-1 · Cited by 753
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Yang, Y., Kim, K.-H., & Ong, J. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.029 · Cited by 667
Biodegradation and bioresorption of calcium phosphate ceramics
LeGeros, R. Z. (1993) · Clinical Materials · doi:10.1016/0267-6605(93)90049-d · Cited by 647
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Effect of Bioactive Glasses on Angiogenesis: A Review of In Vitro and In Vivo Evidences
Gorustovich, A. A., Roether, J. A., & Boccaccini, A. R. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0416 · Cited by 622
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
A review of shape memory polymer composites and blends
Meng, Q., & Hu, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.08.011 · Cited by 609
Medical applications of shape memory alloys
Machado, L. G., & Savi, M. A. (2003) · Brazilian Journal of Medical and Biological Research · doi:10.1590/s0100-879x2003000600001 · Cited by 544
Electrospinning of polysaccharides for regenerative medicine
Lee, K. Y., Jeong, L., Kang, Y. O., Lee, S. J., & Park, W. H. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.006 · Cited by 530
On the selection of shape memory alloys for actuators
Huang, W. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00039-5 · Cited by 519
Co‐axial Electrospinning for Nanofiber Structures: Preparation and Applications
Moghe, A. K., & Gupta, B. S. (2008) · Polymer Reviews · doi:10.1080/15583720802022257 · Cited by 497
Kuboki, Y., Takita, H., Kobayashi, D., Tsuruga, E., Inoue, M., Murata, M., Nagai, N., Dohi, Y., & Ohgushi, H. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199802)39:2<190::aid-jbm4>3.0.co;2-k · Cited by 490
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Van Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., & Kruth, J. P. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.045 · Cited by 452
Self-citationPolymer carriers for drug delivery in tissue engineering
Sokolsky-Papkov, M., Agashi, K., Olaye, A., Shakesheff, K., & Domb, A. J. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.001 · Cited by 452
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Bacterial colonization of zirconia ceramic surfaces: an in vitro and in vivo study.
Rimondini, L., Cerroni, L., Carrassi, A., & Torricelli, P. (2003) · PubMed · Cited by 416
Jagur‐Grodzinski, J. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.729 · Cited by 394
Bioactive Glass Stimulates the Secretion of Angiogenic Growth Factors and Angiogenesis in Vitro
Day, R. M. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.768 · Cited by 389
Pattanayak, D. K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., Nishida, N., Nakamura, T., & Kokubo, T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.034 · Cited by 384
Polymeric gels and hydrogels for biomedical and pharmaceutical applications
Jagur‐Grodzinski, J. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1504 · Cited by 383
Antibacterial activity of particulate Bioglass® against supra- and subgingival bacteria
Allan, I., Newman, H., & Wilson, M. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00330-6 · Cited by 383
Hastings, G. W. (1989) · Biomaterials · doi:10.1016/0142-9612(89)90031-8 · Cited by 370
Medical applications of shape memory polymers
Sokolowski, W., Metcalfe, A., Hayashi, S., Yahia, L., & Raymond, J. (2007) · Biomedical Materials · doi:10.1088/1748-6041/2/1/s04 · Cited by 369
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Electrospinning of polymer melts: Phenomenological observations
Dalton, P. D., Grafahrend, D., Klinkhammer, K., Klee, D., & Möller, M. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.037 · Cited by 357
Surface Morphology in Selective Laser Melting of Metal Powders
Yadroitsev, I., & Smurov, I. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.034 · Cited by 349
Engineering functionally graded tissue engineering scaffolds
Leong, K. F., Chua, C. K., Sudarmadji, N., & Yeong, W. Y. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.11.002 · Cited by 346
Jones, A. C., Arns, C. H., Hutmacher, D. W., Milthorpe, B. K., Sheppard, A. P., & Knackstedt, M. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.056 · Cited by 346
Bryant, S. J., & Anseth, K. S. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00225-8 · Cited by 310
Gas flow effects on selective laser melting (SLM) manufacturing performance
Ferrar, B., Mullen, L., Jones, E., Stamp, R., & Sutcliffe, C. J. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.09.020 · Cited by 302
Degidi, M., Artese, L., Scarano, A., Perrotti, V., Gehrke, P., & Piattelli, A. (2006) · Journal of Periodontology · doi:10.1902/jop.2006.77.1.73 · Cited by 298
Plasma-assisted surface modification of organic biopolymers to prevent bacterial attachment
Bazaka, K., Jacob, M. V., Crawford, R. J., & Ivanova, E. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.024 · Cited by 296
Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., & Cho, D.-W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 274
Kamitakahara, M., Ohtsuki, C., & Miyazaki, T. (2008) · Journal of Biomaterials Applications · doi:10.1177/0885328208096798 · Cited by 272
Jet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Evaluation of a degradable shape-memory polymer network as matrix for controlled drug release
Wischke, C., Neffe, A. T., Steuer, S., & Lendlein, A. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.05.027 · Cited by 248
Zhou, W. Y., Lee, S. H., Wang, M., Cheung, W. L., & Ip, W. Y. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3089-3 · Cited by 247
Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications
Lee, K., Yang, D., Park, S. H., & Kim, R. H. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.664 · Cited by 242
Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds
Wang, F., Shor, L., Darling, A., Khalil, S., Sun, W., Güçeri, S., & Lau, A. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410512525 · Cited by 241
Hydroxyapatite implants with designed internal architecture
Chu, T. G., Halloran, J. W., Hollister, S. J., et al. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011203226053 · Cited by 236
Agrawal, C. M., McKinney, J. S., Lanctot, D., & Athanasiou, K. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00112-5 · Cited by 233
Hao, L., Dadbakhsh, S., Seaman, O., & Felstead, M. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.06.012 · Cited by 233
Shape memory alloys for microsystems: A review from a material research perspective
Bellouard, Y. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2007.02.166 · Cited by 227
The effects of implant surface nanoscale features on osteoblast-specific gene expression
Mendonça, G., Mendonça, D. B. S., Simões, L. G. P., Araújo, A. L., Leite, E. R., Duarte, W. R., Aragão, F. J. L., & Cooper, L. F. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.04.010 · Cited by 227
Optimizing the sterilization of PLGA scaffolds for use in tissue engineering
Holy, C. E., Cheng, C., Davies, J. E., & Shoichet, M. S. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00136-8 · Cited by 223
The Design and Manufacture of Biomedical Surfaces
Ramsden, J. J., Allen, D. M., Stephenson, D. J., Alcock, J. R., Peggs, G. N., Fuller, G., & Goch, G. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.001 · Cited by 222
Two-photon polymerisation for three-dimensional micro-fabrication
Wu, S., Serbin, J., & Gu, M. (2006) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2006.03.004 · Cited by 222
DNA deposition through laser induced forward transfer
Colina, M., Serra, P., Fernández-Pradas, J. M., Sevilla, L., & Morenza, J. L. (2005) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.08.047 · Cited by 217
In vivo fracture resistance of implant-supported all-ceramic restorations
Yildirim, M., Fischer, H., Marx, R., & Edelhoff, D. (2003) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(03)00514-6 · Cited by 213
On scaffold designing for bone regeneration: A computational multiscale approach
SANZHERRERA, J., GARCIAAZNAR, J., & DOBLARE, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.06.021 · Cited by 213
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Lam, C. X., Teoh, S. H., & Hutmacher, D. W. (2007) · Polymer International · doi:10.1002/pi.2195 · Cited by 209
Courtney, J. M. (1981) · Journal of Biomedical Engineering · doi:10.1016/0141-5425(81)90094-7 · Cited by 207
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Xu, C., Su, P., Chen, X., Meng, Y., Yu, W., Xiang, A. P., & Wang, Y. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.068 · Cited by 203
Cell colonization in degradable 3D porous matrices
Lawrence, B. J., & Madihally, S. V. (2008) · Cell Adhesion & Migration · doi:10.4161/cam.2.1.5884 · Cited by 197
Mechanical properties of open‐pore titanium foam
Imwinkelried, T. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31118 · Cited by 188
Masoumi, M., Raissi, F., Ahmadian, M., & Keshavarzi, P. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/1/015 · Cited by 182
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
Koike, M., Martinez, K., Guo, L., Chahine, G., Kovacevic, R., & Okabe, T. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.03.013 · Cited by 182
In vivo mechanisms of hydroxyapatite ceramic degradation by osteoclasts: Fine structural microscopy
Wenisch, S., Stahl, J. ‐., Horas, U., Heiss, C., Kilian, O., Trinkaus, K., Hild, A., & Schnettler, R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10091 · Cited by 173
Hedberg, E. L., Shih, C. K., Lemoine, J. J., Timmer, M. D., K. Liebschner, M. A., Jansen, J. A., & Mikos, A. G. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.012 · Cited by 173
Hydrogel dressings in the management of a variety of wound types: A review
Jones, A., & Vaughan, D. (2005) · Journal of Orthopaedic Nursing · doi:10.1016/s1361-3111(05)80001-9 · Cited by 172
Selective laser sintering of ultra high molecular weight polyethylene for clinical applications
Rimell, J. T., & Marquis, P. M. (2000) · Journal of Biomedical Materials Research · Cited by 168
Domingos, M., Chiellini, F., Gloria, A., Ambrosio, L., Bartolo, P., & Chiellini, E. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193502 · Cited by 164
Self-citationKolan, K. C. R., Leu, M. C., Hilmas, G. E., Brown, R. F., & Velez, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025004 · Cited by 161
Self-citationBiomanufacturing for tissue engineering: Present and future trends
Bártolo, P., Chua, C. K., Almeida, H. A., Chou, S. M., & Lim, A. S. C. (2009) · Virtual and Physical Prototyping · doi:10.1080/17452750903476288 · Cited by 154
Porosity variation in hydroxyapatite and osteoblast morphology: a scanning electron microscopy study
Annaz, B., Hing, K. A., Kayser, M. V., Buckland, T., & Silvio, L. D. (2004) · Journal of Microscopy · doi:10.1111/j.0022-2720.2004.01354.x · Cited by 130
Bittner, B., Mäder, K., Kroll, C., Borchert, H.-H., & Kissel, T. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00170-9 · Cited by 128
Trabecular scaffolds created using micro CT guided fused deposition modeling
Tellis, B. C., Szivek, J. A., Bliss, C. L., Margolis, D. S., Vaidyanathan, R. K., & Calvert, P. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.010 · Cited by 125
Metals in medical applications
Kohn, D. H. (1998) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(98)80107-1 · Cited by 123
Clare, A. T., Chalker, P. R., Davies, S., Sutcliffe, C. J., & Tsopanos, S. (2007) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-007-9032-4 · Cited by 121
Elevated temperature degradation of a 50:50 copolymer of PLA-PGA
Agrawal, C. M., Huang, D., Schmitz, J. P., & Athanasiou, K. A. (1997) · Tissue Engineering · doi:10.1089/ten.1997.3.345 · Cited by 120
A quantitative method for evaluating the degradation of biologic scaffold materials
Gilbert, T. W., Stewart‐Akers, A. M., & Badylak, S. F. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.022 · Cited by 117
Lee, J. W., Ahn, G., Kim, D. S., & Cho, D. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.12.038 · Cited by 115
Cottam, E., Hukins, D. W. L., Lee, K., Hewitt, C., & Jenkins, M. J. (2009) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2008.07.005 · Cited by 110
Biomaterials: A primer for surgeons
Binyamin, G. N., Shafi, B. M., & Mery, C. M. (2006) · Seminars in Pediatric Surgery · doi:10.1053/j.sempedsurg.2006.07.007 · Cited by 109
Does UV irradiation affect polymer properties relevant to tissue engineering?
Fischbach, C., Teßmar, J., Lucke, A., Schnell, E., Schmeer, G., Blunk, T., & Göpferich, A. M. (2001) · Surface Science · doi:10.1016/s0039-6028(01)01297-3 · Cited by 102
Metal filled resin for stereolithography metal part
Bártolo, P., & Gaspar, J. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.124 · Cited by 98
The use of bioabsorbable implants in the spine
Vaccaro, A. R., Singh, K., Haid, R. W., Kitchel, S. H., Wuisman, P. I. J. M., Taylor, W., Branch, C. L., & Garfin, S. R. (2003) · The Spine Journal · doi:10.1016/s1529-9430(02)00412-6 · Cited by 97
Porous and strong bioactive glass (13–93) scaffolds fabricated by freeze extrusion technique
Huang, T., Rahaman, M. N., Doiphode, N. D., Leu, M.-C., Bal, B. S., Day, D. E., & Liu, X. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.06.004 · Cited by 97
Self-citationCeramic bioactivity: progresses, challenges and perspectives
Lee, K.-Y., Park, M., Kim, H.-M., Lim, Y., Chun, H.-J., Kim, H., & Moon, S.-H. (2006) · Biomedical Materials · doi:10.1088/1748-6041/1/2/r01 · Cited by 96
Fabrication of bioactive glass–ceramic foams mimicking human bone portions for regenerative medicine
Rainer, A., Giannitelli, S. M., Abbruzzese, F., Traversa, E., Licoccia, S., & Trombetta, M. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.08.007 · Cited by 95
Rouahi, M., Champion, É., Hardouin, P., & Anselme, K. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.001 · Cited by 93
Biological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering
Goodridge, R., Wood, D. J., Ohtsuki, C., & Dalgarno, K. W. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.10.005 · Cited by 93
Composite Electrospun Scaffolds for Engineering Tubular Bone Grafts
Ekaputra, A. K., Zhou, Y., Cool, S. M., et al. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0186 · Cited by 89
Calcium phosphate bone cements, functionalized with VEGF: Release kinetics and biological activity
Lode, A., Wolf‐Brandstetter, C., Reinstorf, A., Bernhardt, A., König, U., Pompe, W., & Gelinsky, M. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31024 · Cited by 89
Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness
Moroni, L., Schotel, R., Sohier, J., de Wijn, J. R., & van Blitterswijk, C. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.015 · Cited by 88
Development of highly porous titanium scaffolds by selective laser melting
Wang, Y., Shen, Y., Wang, Z., Yang, J., Liu, N., & Wenrong, H. (2010) · Materials Letters · doi:10.1016/j.matlet.2009.12.035 · Cited by 87
Customization of Load‐Bearing Hydroxyapatite Lattice Scaffolds
Cesarano, J., Dellinger, J. G., Saavedra, M. P., Gill, D., Jamison, R. D., Grosser, B., Sinn-Hanlon, J., & Goldwasser, M. S. (2005) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2005.02026.x · Cited by 87
Mazzoli, A., Germani, M., & Raffaeli, R. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.11.013 · Cited by 86
Cellular mechanisms of calcium phosphate ceramic degradation.
Heymann, D., Pradal, G., & Benahmed, M. (1999) · PubMed · doi:10.14670/hh-14.871 · Cited by 78
CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant.
Levy, R. A., Chu, T. G., Halloran, J. W., Feinberg, S. E., & Hollister, S. J. (1997) · PubMed Central · Cited by 72
Dual-Scale Polymeric Constructs as Scaffolds for Tissue Engineering
Mota, C., Puppi, D., Dinucci, D., Errico, C., Bártolo, P., & Chiellini, E. (2011) · Materials · doi:10.3390/ma4030527 · Cited by 67
Domingos, M. A. N., Chiellini, E., Cometa, S., Giglio, E. D., Fernandes, E. G., Bártolo, P., & Chiellini, E. (2010) · Virtual and Physical Prototyping · doi:10.1080/17452751003769440 · Cited by 66
Manufacture of Co-Cr dental crowns and bridges by selective laser Melting technology
Averyanova, M., Bertrand, P., & Verquin, B. (2011) · Virtual and Physical Prototyping · doi:10.1080/17452759.2011.619083 · Cited by 61
Andrews, K. D., Hunt, J. A., & Black, R. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.10.014 · Cited by 58
Virtual Prototyping of Biomanufacturing in Medical Applications
Morsi, Y., Wong, C. S., & Patel, S. S. (2007) · Springer eBooks · doi:10.1007/978-0-387-68831-2_7 · Cited by 55
BORETOS, J. W. (1984) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)81555-0 · Cited by 53
Coalescence Behaviour of Two Metallic Particles as Base Mechanism of Selective Laser Sintering
Klocke, F., Wagner, C., & Klocke, F. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60559-9 · Cited by 48
Selective Laser Sintering of Bioceramic Materials for Implants
Barlow, J. W. (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t26q1t10x · Cited by 44
Lee, J.-J., Lee, S.-G., Park, J., et al. (2007) · Current Applied Physics · doi:10.1016/j.cap.2006.11.011 · Cited by 42
Development of a bone scaffold using HA nanopowder and micro-stereolithography technology
Kim, J. Y., Lee, J. W., Lee, S., Park, E. K., Kim, S., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.204 · Cited by 40
Matsumoto, T., & Mooney, D. J. (2006) · Springer eBooks · doi:10.1007/b137207 · Cited by 38
Contour offset algorithm for precise patterning in two-photon polymerization
Lim, T. W., Park, S., & Yang, D. (2005) · Microelectronic Engineering · doi:10.1016/j.mee.2005.01.022 · Cited by 37
Designer ‘blueprint’ for vascular trees: morphology evolution of vascular tissue constructs
Mironov, V. A., Zhang, J., Gentile, C., Brakke, K. A., Trusk, T. C., Jakab, K., Forgács, G., Kasyanov, V. A., Visconti, R. P., & Markwald, R. R. (2009) · Virtual and Physical Prototyping · doi:10.1080/17452750802657202 · Cited by 35
Wang, J., de Boer, J., & de Groot, K. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32128 · Cited by 33
Fundamental study and theoretical analysis in a constrained-surface stereolithography system
Huang, Y., Kuriyama, S., & Jiang, C. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-003-1627-9 · Cited by 31
Practical Use of Hydrogels in Stereolithography for Tissue Engineering Applications
Arcaute, K., Mann, B. K., & Wicker, R. B. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_12 · Cited by 27
In vivo/ex vivo cellular interactions with titanium and copper
Suska, F., Källtorp, M., Esposito, M. A., Gretzer, C., Tengvall, P., & Thomsen, P. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1012844612753 · Cited by 25
Computational Design, Freeform Fabrication and Testing of Nylon-6 Tissue Engineering Scaffolds
Das, S., Hollister, S. J., Flanagan, C. L., et al. (2002) · MRS Proceedings · doi:10.1557/proc-758-ll5.7 · Cited by 17
Photonic and Biomedical Applications of the Two-Photon Polymerization Technique
Ovsianikov, A., Farsari, M., & Chichkov, B. N. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_11 · Cited by 5
Kolan, K. C. R., Leu, M.-C., Hilmas, G. E., & Veléz, M. H. (2011) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15314 · Cited by 4
Self-citationLu (1999) · doi:10.1002/(sici)1097-4636(199908)46:2
Cited by
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Self-citationThe role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Graphene and graphene oxide as nanomaterials for medicine and biology application
Priyadarsini, S., Mohanty, S., Mukherjee, S., Basu, S., & Mishra, M. (2018) · Journal of Nanostructure in Chemistry · doi:10.1007/s40097-018-0265-6 · Cited by 570
Metadata
- Authors
- Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M.
- Venue
- CIRP Annals
- Publisher
- Elsevier BV
- Published
- 2012
- Volume
- 61
- Issue
- 2
- Pages
- 635-655
- ISSN
- 0007-8506 (ISSN-L)
- OpenAlex
- W1999735235
- Cited by
- 321
- References
- 168
- FWCI
- 13.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.