The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
Eco-friendly polymer composites for green packaging: Future vision and challenges
Abstract
Abstract At present, renewable and biodegradable biocomposites materials have drawn much attention as promising green materials in different domains of application such as intelligent food packaging, biomedical and drug delivery, bio-membranes, automotive, as well as in industrial composting applications. The current review deals with the advances in preparation methods and technical applications of these biocomposites. Different biomass materials obtained from renewable resources such as coffee grounds (CG), nanocellulose and date stones are developed to be used as smart reinforcing agents in biodegradable biopolymers for improving their overall properties. Conversely, some drawbacks are associated with the use of lignocellulosic materials as reinforcing agents, especially their high humidity absorption, poor wettability, and incompatibility with most biopolymers. Thus, novel processing techniques and different aspects are proposed in this review to produce high performance lignocellulosic reinforced materials with better properties. Facial and green modification of organoclay (OC) by antibacterial natural rosin and stearic acid to obtain toxicity-free expanded OC is also discussed. Green modification using OC can also be used as compatibilizing and reinforcing material for different incompatible biopolymers such as chitosan, carboxy methyl cellulose (CMC) and polylactic acid (PLA). Ultimately, the future vision on the challenges and the environmental issues towards CO2 emission which is associated to the risk assessment of these bionanomaterials are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Sondi, I., & Salopek-Sondi, B. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.02.012 · Cited by 5,986
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Nanostructured materials: basic concepts and microstructure
Gleiter, H. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00285-2 · Cited by 3,045
Energy production from biomass (part 2): conversion technologies
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00119-5 · Cited by 2,042
Duncan, T. V. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.07.017 · Cited by 2,029
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Polyaniline Nanofibers: Facile Synthesis and Chemical Sensors
Huang, J., Virji, S., Weiller, B. H., & Kaner, R. B. (2003) · Journal of the American Chemical Society · doi:10.1021/ja028371y · Cited by 1,665
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Nanoemulsion: Concepts, development and applications in drug delivery
Singh, Y., Meher, J. G., Raval, K., Khan, F. A., Chaurasia, M., Jain, N. K., & Chourasia, M. K. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.03.008 · Cited by 1,358
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
Tiwari, J. N., Tiwari, R. N., & Kim, K. S. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.003 · Cited by 1,195
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Food packaging — Principles and practice
Smith, J. P. (1993) · Food Research International · doi:10.1016/0963-9969(93)90058-q · Cited by 999
Sol–gel based materials for biomedical applications
Owens, G. J., Singh, R. K., Foroutan, F., Alqaysi, M., Han, C.-M., Mahapatra, C., Kim, H.-W., & Knowles, J. C. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.12.001 · Cited by 958
Intelligent Packaging: Concepts and Applications
Yam, K. L., Takhistov, P. T., & Miltz, J. (2005) · Journal of Food Science · doi:10.1111/j.1365-2621.2005.tb09052.x · Cited by 858
Lattice Model of Polymer Melt Intercalation in Organically-Modified Layered Silicates
Vaia, R. A., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma9514333 · Cited by 827
Influence of torrefaction on the grindability and reactivity of woody biomass
Arias, B., Pevida, C., Fermoso, J., Plaza, M. G., Rubiera, F., & Pis, J. J. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.09.002 · Cited by 763
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Bionanocomposites materials for food packaging applications: concepts and future outlook
Youssef, A. M., & El-Sayed, S. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.088 · Cited by 738
Self-citationReview: Nanocomposites in Food Packaging
Arora, A., & Padua, G. W. (2010) · Journal of Food Science · doi:10.1111/j.1750-3841.2009.01456.x · Cited by 735
Toxicological Effect of ZnO Nanoparticles Based on Bacteria
Huang, Z., Zheng, X., Yan, D., Yin, G., Liao, X., Kang, Y., Yao, Y., Huang, D., & Hao, B. (2008) · Langmuir · doi:10.1021/la7035949 · Cited by 641
Effect of organoclay structure on nylon 6 nanocomposite morphology and properties
Fornes, T. D., Yoon, P. J., Hunter, D. L., Keskkula, H., & Paul, D. R. (2002) · Polymer · doi:10.1016/s0032-3861(02)00400-7 · Cited by 621
Nanotechnology for the Food and Bioprocessing Industries
Neethirajan, S., & Jayas, D. S. (2011) · Food and Bioprocess Technology · doi:10.1007/s11947-010-0328-2 · Cited by 593
Nanofiber Assembly by Rotary Jet-Spinning
Badrossamay, M. R., McIlwee, H. A., Goss, J. A., & Parker, K. K. (2010) · Nano Letters · doi:10.1021/nl101355x · Cited by 518
Transparent and conductive paper from nanocellulose fibers
Hu, L., Zheng, G., Yao, J., Liu, N., Weil, B., Eskilsson, M., Karabulut, E., Ruan, Z., Fan, S., Bloking, J. T., et al. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23635d · Cited by 510
Fortunati, E., Peltzer, M., Armentano, I., Torre, L., Jiménez, A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.025 · Cited by 494
Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells
Fang, Z., Zhu, H., Yuan, Y., Ha, D., Zhu, S., Preston, C., Chen, Q., Li, Y., Han, X., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl404101p · Cited by 489
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Oil-in-water nanoemulsions for pesticide formulations
Wang, L., Li, X., Zhang, G., Dong, J., & Eastoe, J. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.04.079 · Cited by 462
Preparation, characterization, and antimicrobial activity of gelatin/ZnO nanocomposite films
Shankar, S., Teng, X., Li, G., & Rhim, J.-W. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.12.001 · Cited by 449
Nano‐Food Packaging: An Overview of Market, Migration Research, and Safety Regulations
Bumbudsanpharoke, N., & Ko, S. (2015) · Journal of Food Science · doi:10.1111/1750-3841.12861 · Cited by 423
Application of Nanoparticles in Waste Water Treatment
Tiwari, D. K., Behari, J., & Sen, P. (2008) · Cited by 400
Preparation and Properties of Biodegradable Thermoplastic Starch/Clay Hybrids
Park, H.-M., Li, X., Jin, C.-Z., Park, C.-Y., Cho, W.-J., & Ha, C.-S. (2002) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20020801)287:8<553::aid-mame553>3.0.co;2-3 · Cited by 392
The surface modification of cellulose fibres for use as reinforcing elements in composite materials
Belgacem, M. N., & Gandini, A. (2005) · Composite Interfaces · doi:10.1163/1568554053542188 · Cited by 388
Cellulose nanomaterial reinforced polymer nanocomposites
Dufresne, A. (2017) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2017.01.004 · Cited by 349
The chemical composition of exhausted coffee waste
Pujol, D., Liu, C., Gominho, J., Olivella, M. À., Fiol, N., Villaescusa, I., & Pereira, H. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.07.056 · Cited by 342
Nanoemulsion: process selection and application in cosmetics – a review
Yukuyama, M. N., Ghisleni, D. D. M., Pinto, T. J. A., & Bou‐Chacra, N. A. (2016) · International Journal of Cosmetic Science · doi:10.1111/ics.12260 · Cited by 342
Complete Utilization of Spent Coffee Grounds To Produce Biodiesel, Bio-Oil, and Biochar
Vardon, D. R., Moser, B. R., Zheng, W., Witkin, K., Evangelista, R. L., Strathmann, T. J., Rajagopalan, K., & Sharma, B. K. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400145w · Cited by 324
Henyon, D. (1991) · doi:10.1520/stp1113-eb · Cited by 307
Impact of torrefaction on syngas production from wood
Couhert, C., Salvador, S., & Commandré, J.-M. (2009) · Fuel · doi:10.1016/j.fuel.2009.05.003 · Cited by 294
Youssef, A. M., EL-Sayed, S. M., EL-Sayed, H. S., Salama, H. H., & Dufresne, A. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.023 · Cited by 283
Self-citationStability of casein micelles in milk
Tuinier, R., & de Kruif, C. G. (2002) · The Journal of Chemical Physics · doi:10.1063/1.1484379 · Cited by 269
Lani, N. S., Ngadi, N., Johari, A., & Jusoh, M. (2014) · Journal of Nanomaterials · doi:10.1155/2014/702538 · Cited by 261
Polymer Nanocomposites as a New Trend for Packaging Applications
Youssef, A. M. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.762673 · Cited by 248
Self-citationYoussef, A. M., Abdel-Aziz, M. S., & El-Sayed, S. M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.05.047 · Cited by 247
Self-citationChitosan/whey protein film as active coating to extend Ricotta cheese shelf-life
Di Pierro, P., Sorrentino, A., Mariniello, L., Giosafatto, C. V. L., & Porta, R. (2011) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2010.11.031 · Cited by 243
Biocompatible Nanofiber Matrices for the Engineering of a Dermal Substitute for Skin Regeneration
Venugopal, J., & Ramakrishna, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.847 · Cited by 240
PLA/PBAT Bionanocomposites with Antimicrobial Natural Rosin for Green Packaging
Moustafa, H., El Kissi, N., Abou-Kandil, A. I., Abdel-Aziz, M. S., & Dufresne, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05557 · Cited by 240
Self-citationLong-term antimicrobial polyamide 6/silver-nanocomposites
Damm, C., Münstedt, H., & Rösch, A. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1158-5 · Cited by 237
Recent advances and remaining challenges for polymeric nanocomposites in healthcare applications
Kumar, S., Sarita, Nehra, M., Dilbaghi, N., Tankeshwar, K., & Kim, K.-H. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.001 · Cited by 215
Fortunati, E., Puglia, D., Luzi, F., Santulli, C., Kenny, J. M., & Torre, L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.075 · Cited by 212
Cleaner nanotechnology and hazard reduction of manufactured nanoparticles
Reijnders, L. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2005.03.018 · Cited by 207
Characterization of polysaccharides extracted from spent coffee grounds by alkali pretreatment
Ballesteros, L. F., Cerqueira, M. A., Teixeira, J. A., & Mussatto, S. I. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.047 · Cited by 198
Moustafa, H., Guizani, C., Dupont, C., Martin, V., Jeguirim, M., & Dufresne, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02633 · Cited by 195
Self-citationLessa, E. F., Nunes, M. L., & Fajardo, A. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.018 · Cited by 185
Nuclear Membrane-Targeted Gold Nanoparticles Inhibit Cancer Cell Migration and Invasion
Ali, M. R. K., Wu, Y., Ghosh, D., Do, B. H., Chen, K., Dawson, M. R., Fang, N., Sulchek, T. A., & El-Sayed, M. A. (2017) · ACS Nano · doi:10.1021/acsnano.6b08345 · Cited by 178
Processing and characterization of new thermoset nanocomposites based on cellulose whiskers
Matos Ruiz, M., Cavaillé, J. Y., Dufresne, A., Gérard, J. F., & Graillat, C. (2000) · Composite Interfaces · doi:10.1163/156855400300184271 · Cited by 172
Moustafa, H., Guizani, C., & Dufresne, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44498 · Cited by 161
Self-citationTorrefaction of agriculture straws and its application on biomass pyrolysis poly-generation
Chen, Y., Yang, H., Yang, Q., HongMeng, H., Zhu, B., & Chen, H. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.12.088 · Cited by 156
Active and intelligent packaging for food: Is it the future?
de Jong, A. R., Boumans, H., Slaghek, T. M., Veen, J. V., Rijk, R., & Zandvoort, M. V. (2005) · Food Additives & Contaminants · doi:10.1080/02652030500336254 · Cited by 154
Determining nanomaterials in food
Blasco, C., & Picó, Y. (2010) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2010.08.010 · Cited by 149
Nadege, F., Belbekhouche, S., Bras, J., Siqueira, G. D. F., Marais, S., & Dufresne, A. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.048 · Cited by 149
Evaluation of corn husk fibers reinforced recycled low density polyethylene composites
Youssef, A. M., El-Gendy, A., & Kamel, S. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.12.004 · Cited by 147
Self-citationMechanistic Understanding of Thermochemical Conversion of Polymers and Lignocellulosic Biomass
Zhou, X., Broadbelt, L. J., & Vinu, R. (2016) · Advances in chemical engineering · doi:10.1016/bs.ache.2016.09.002 · Cited by 137
Ballesteros, L. F., Teixeira, J. A., & Mussatto, S. I. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.054 · Cited by 135
Development of bionanocomposite materials and its use in coating of Ras cheese
Youssef, A. M., Assem, F. M., Abdel-Aziz, M. E., Elaaser, M. M., Ibrahim, O. A. E.-H., Mahmoud, M., & EL‐SALAM, M. H. A. (2018) · Food Chemistry · doi:10.1016/j.foodchem.2018.07.114 · Cited by 134
Self-citationShoba, H., Ramappa, & Jain, S. (2024) · Springer eBooks · doi:10.1007/978-981-97-3261-6_8 · Cited by 131
Review of Green Polymer Nanocomposites
Adeosun, S. O., Lawal, G. I., Balogun, S. A., & Akpan, E. I. (2012) · Journal of Minerals and Materials Characterization and Engineering · doi:10.4236/jmmce.2012.114028 · Cited by 130
Polysaccharide nanomaterial reinforced starch nanocomposites: A review
Dufresne, A., & Castaño, J. (2016) · Starch - Stärke · doi:10.1002/star.201500307 · Cited by 120
de Castro, D. O., Bras, J., Gandini, A., & Belgacem, M. N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.101 · Cited by 115
Takeuchi, M. T., Kojima, M., & Lützow, M. (2014) · Food Research International · doi:10.1016/j.foodres.2014.03.022 · Cited by 110
Nanocomposites based on poly(butylene adipate‐co‐terephthalate) and montmorillonite
Someya, Y., Sugahara, Y., & Shibata, M. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21333 · Cited by 106
Identification and characterization of organic nanoparticles in food
Peters, R., ten Dam, G., Bouwmeester, H., Helsper, H., Allmaier, G. M., von der Kammer, F., Ramsch, R., Solans, C., Tomaniová, M., Hajšlová, J., et al. (2010) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2010.10.004 · Cited by 105
Youssef, A. M., Nahrawy, A. M. E., & Hammad, A. B. A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.01.059 · Cited by 94
Self-citationNovel bionanocomposite materials used for packaging skimmed milk acid coagulated cheese (Karish)
Youssef, A. M., El-Sayed, S. M., El-Sayed, H. S., Salama, H. H., Assem, F. M., & EL‐SALAM, M. H. A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.165 · Cited by 90
Self-citationLin, Y. J., & Lin, H.-T. (2010) · Building and Environment · doi:10.1016/j.buildenv.2010.07.027 · Cited by 81
Production and fuel quality upgradation of pyrolytic bio-oil from Jatropha Curcas de-oiled seed cake
Biradar, C. H., Subramanian, K. A., & Dastidar, M. G. (2013) · Fuel · doi:10.1016/j.fuel.2013.11.035 · Cited by 79
Packaging handling evaluation methods in the grocery retail industry
Saghir, M. A. R., & Jönson, G. (2001) · Packaging Technology and Science · doi:10.1002/pts.523 · Cited by 72
Youssef, A. M. (2013) · RSC Advances · doi:10.1039/c3ra44658a · Cited by 64
Self-citationPolylactides ‐ degradable polymers for fibres and films
Meinander, K., Niemi, M., Hakola, J. S., & Selin, J. (1997) · Macromolecular Symposia · doi:10.1002/masy.19971230115 · Cited by 63
Youssef, A. M., Bujdosó, T., Hornok, V., Papp, S., Abd‐El‐Hakim, A. A., & Dékány, I. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.03.011 · Cited by 54
Self-citationLi, C., Jiang, T., Wang, J., Peng, S., Wu, H. K., Shen, J., Guo, S., Zhang, X., & Harkin‐Jones, E. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00026 · Cited by 50
The Cellulose Nanofibers for Optoelectronic Conversion and Energy Storage
Luo, Y., Zhang, J., Li, X., Liao, C., & Li, X. (2014) · Journal of Nanomaterials · doi:10.1155/2014/654512 · Cited by 40
Moustafa, H., Galliard, H., Vidal, L., & Dufresne, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.12.009 · Cited by 39
Self-citationRelease and transformation behavior of Cl during pyrolysis of torrefied rice straw
Chen, H., Chen, X., Qiao, Z., & Liu, H. (2016) · Fuel · doi:10.1016/j.fuel.2016.06.031 · Cited by 38
Moustafa, H., Darwish, N. A., NOUR, M. A., & Youssef, A. M. (2016) · Polymer Composites · doi:10.1002/pc.24157 · Cited by 33
Self-citationA Hard Nut to Crack: Reducing Chemical Migration in Food-Contact Materials
Seltenrich, N. (2015) · Environmental Health Perspectives · doi:10.1289/ehp.123-a174 · Cited by 29
Wang, Z., Du, X., Song, R., Meng, X., Jiang, Z., & Tang, T. (2007) · Polymer · doi:10.1016/j.polymer.2007.10.025 · Cited by 26
Cited by
Asgher, M., Qamar, S. A., Bilal, M., & Iqbal, H. M. N. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109625 · Cited by 721
An Overview of Plastic Waste Generation and Management in Food Packaging Industries
Ncube, L. K., Ude, A. U., Ogunmuyiwa, E. N., Zulkifli, R., & Beas, I. N. (2021) · Recycling · doi:10.3390/recycling6010012 · Cited by 647
Al-Tayyar, N. A., Youssef, A. M., & Al-hindi, R. (2020) · Food Chemistry · doi:10.1016/j.foodchem.2019.125915 · Cited by 485
Self-citationKamarudin, S. H., Mohd Basri, M. S., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., et al. (2022) · Polymers · doi:10.3390/polym14173698 · Cited by 459
Production of Sustainable and Biodegradable Polymers from Agricultural Waste
Maraveas, C. (2020) · Polymers · doi:10.3390/polym12051127 · Cited by 423
Metadata
- Authors
- Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 172
- Pages
- 16-25
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2944774535
- Cited by
- 381
- References
- 90
- FWCI
- 18.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.