The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
A review of thermal runaway prevention and mitigation strategies for lithium-ion batteries
Open accessAbstract
Lithium-ion batteries are widely considered the leading candidate energy source for powering electric vehicles due to their high energy and power densities. The thermal runaway of lithium-ion batteries is the phenomenon of chain exothermic reactions within the battery. These reactions cause a sharp rise in the internal battery temperature causing the inner structures of the battery to destabilize and degrade, which eventually leads to the failure of the battery. This paper provides a comprehensive review of the key aspects of the thermal runaway processes, which consists of thermal runaway initiation mechanisms, thermal runaway propagation, and the characterization of vented gases during the thermal runaway process. Thermal runaway is a major safety concern; therefore, the development of mathematical and numerical models to predict thermal runaway is reviewed, which provides useful data to design and develop battery packs with thermal runaway safety features. Furthermore, the development of effective battery thermal management systems is discussed, which is essential to prevent thermal runaway initiation. Finally, mitigation strategies are reviewed, which are developed to contain and minimize damages when thermal runaway occurs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-equation eddy-viscosity turbulence models for engineering applications
Menter, F. R. (1994) · AIAA Journal · doi:10.2514/3.12149 · Cited by 21,593
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes
Golubkov, A. W., Fuchs, D., Wagner, J., Wiltsche, H., Stangl, C., Fauler, G., Voitic, G., Thaler, A., & Hacker, V. (2014) · RSC Adv. · doi:10.1039/c3ra45748f · Cited by 901
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
Omar, N., Monem, M. A., Firouz, Y., Salminen, J., Smekens, J., Hegazy, O., Gaulous, H., Mulder, G., Van den Bossche, P., Coosemans, T., et al. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.003 · Cited by 740
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
Richard, M. N., & Dahn, J. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391893 · Cited by 601
Feng, X., Sun, J., Ouyang, M., Wang, F., He, X., Lu, L., & Peng, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.017 · Cited by 589
Golubkov, A. W., Scheikl, S., Planteu, R., Voitic, G., Wiltsche, H., Stangl, C., Fauler, G., Thaler, A., & Hacker, V. (2015) · RSC Advances · doi:10.1039/c5ra05897j · Cited by 561
Rao, Z., Qian, Z., Kuang, Y., & Li, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.059 · Cited by 535
Comparative Issues of Cathode Materials for Li-Ion Batteries
Julien, C., Mauger, A., Zaghib, K., & Groult, H. (2014) · Inorganics · doi:10.3390/inorganics2010132 · Cited by 513
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Wilke, S., Schweitzer, B., Khateeb, S., & Al-Hallaj, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.018 · Cited by 475
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
Fan, Y., Bao, Y., Ling, C., Chu, Y., Tan, X., & Yang, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.157 · Cited by 441
Ren, D., Liu, X., Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.126 · Cited by 438
Battery modeling for energy-aware system design
Rao, R., Vrudhula, S., & Rakhmatov, D. N. (2003) · Computer · doi:10.1109/mc.2003.1250886 · Cited by 422
Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
Self-citationOvercharge reaction of lithium-ion batteries
Ohsaki, T., Kishi, T., Kuboki, T., Takami, N., Shimura, N., Sato, Y., Sekino, M., & Satoh, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.105 · Cited by 382
Li, H., Duan, Q., Zhao, C., Huang, Z., & Wang, Q. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.03.116 · Cited by 357
Simulation and experimental study on lithium ion battery short circuit
Zhao, R., Liu, J., & Gu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.016 · Cited by 342
Failure mechanism of the lithium ion battery during nail penetration
Mao, B., Chen, H., Cui, Z., Wu, T., & Wang, Q. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.036 · Cited by 340
Finegan, D. P., Darcy, E., Keyser, M., Tjaden, B., Heenan, T. M. M., Jervis, R., Bailey, J. J., Malik, R., Vo, N. T., Magdysyuk, O. V., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00385d · Cited by 326
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Liu, G., Ouyang, M., Lu, L., Li, J., & Han, X. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3599-9 · Cited by 319
Comprehensive gas analysis on large scale automotive lithium-ion cells in thermal runaway
Koch, S., Fill, A., & Birke, K. P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.051 · Cited by 315
Novel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Internal short circuit in Li-ion cells
Maleki, H., & Howard, J. N. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.070 · Cited by 313
Characteristics of lithium-ion batteries during fire tests
Larsson, F., Andersson, P., Blomqvist, P., Lorén, A., & Mellander, B.-E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.027 · Cited by 313
Experimental study on thermal runaway and vented gases of lithium-ion cells
Yuan, L., Dubaniewicz, T., Zlochower, I., Thomas, R., & Rayyan, N. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.07.028 · Cited by 309
Ye, J., Chen, H., Wang, Q., Huang, P., Sun, J., & Lo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.124 · Cited by 304
Zhao, J., Rao, Z., Huo, Y., Liu, X., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.012 · Cited by 296
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Overcharge failure investigation of lithium-ion batteries
Yuan, Q., Zhao, F., Wang, W., Zhao, Y., Liang, Z., & Yan, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.147 · Cited by 286
Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell
Saw, L. H., Ye, Y., & Tay, A. A. O. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.040 · Cited by 275
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Zhang, W., Liang, Z., Yin, X., & Ling, G. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116380 · Cited by 262
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Leising, R. A., Palazzo, M. J., Takeuchi, E. S., & Takeuchi, K. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379740 · Cited by 253
Huang, P., Ping, P., Li, K., Chen, H., Wang, Q., Wen, J., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.160 · Cited by 249
Park, S., & Jung, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.039 · Cited by 243
Coman, P. T., Rayman, S., & White, R. E. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.088 · Cited by 235
Weng, J., Ouyang, D., Yang, X., Chen, M., Zhang, G., & Wang, J. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112071 · Cited by 234
Zhou, H., Zhou, F., Xu, L., Kong, J., & QingxinYang (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.11.116 · Cited by 230
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Kshetrimayum, K. S., Yoon, Y.-G., Gye, H.-R., & Lee, C.-J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113797 · Cited by 216
Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow
Zhao, C., Sousa, A. C. M., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.017 · Cited by 214
Modeling cell venting and gas-phase reactions in 18650 lithium ion batteries during thermal runaway
Kim, J., Mallarapu, A., Finegan, D. P., & Santhanagopalan, S. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229496 · Cited by 205
A Review of Lithium-Ion Battery Fire Suppression
Ghiji, M., Novozhilov, V., Moinuddin, K., Joseph, P., Burch, I., Suendermann, B., & Gamble, G. (2020) · Energies · doi:10.3390/en13195117 · Cited by 198
Cooling control effect of water mist on thermal runaway propagation in lithium ion battery modules
Liu, T., Tao, C., & Wang, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115087 · Cited by 197
Jiang, G., Huang, J., Liu, M., & Cao, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.107 · Cited by 194
Feng, X., He, X., Ouyang, M., Wang, L., Lu, L., Ren, D., & Santhanagopalan, S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311816jes · Cited by 194
Ibrahim, A., & Jiang, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111049 · Cited by 194
Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery Cell
Zavalis, T. G., Behm, M., & Lindbergh, G. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.096206jes · Cited by 186
Zhao, C., Sun, J., & Wang, Q. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101232 · Cited by 180
Comparison analysis on the thermal runaway of lithium-ion battery under two heating modes
Wu, T., Chen, H., Wang, Q., & Sun, J. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.11.022 · Cited by 179
Multi-scale study of thermal stability of lithiated graphite
Chen, Z., Qin, Y., Ren, Y., Lu, W., Orendorff, C., Roth, E. P., & Amine, K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01786a · Cited by 177
Ostanek, J. K., Li, W., Mukherjee, P. P., Crompton, K. R., & Hacker, C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114972 · Cited by 172
Wu, W., Wu, W., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.068 · Cited by 169
Jiang, Z. Y., Qu, Z. G., Zhang, J. F., & Rao, Z. H. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115007 · Cited by 167
Direct Comparison of Immersion and Cold-Plate Based Cooling for Automotive Li-Ion Battery Modules
Dubey, P., Pulugundla, G., & Srouji, A. K. (2021) · Energies · doi:10.3390/en14051259 · Cited by 166
Zhang, H., Wu, X., Wu, Q., & Xu, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113968 · Cited by 164
Cooling control of thermally-induced thermal runaway in 18,650 lithium ion battery with water mist
Liu, T., Liu, Y., Wang, X., Kong, X., & Li, G. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.111969 · Cited by 160
Xu, J., Guo, P., Duan, Q., Xinchun, Y., Zhang, L., Liu, Y., & Wang, Q. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115076 · Cited by 158
Shahid, S., & Agelin‐Chaab, M. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.01.003 · Cited by 155
Self-citationChen, M., Ouyang, D., Liu, J., & Wang, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113750 · Cited by 152
He, F., Li, X., Zhang, G., Zhong, G., & He, J. (2018) · International Journal of Energy Research · doi:10.1002/er.4081 · Cited by 148
Wang, Q., Shao, G., Duan, Q., Chen, M., Li, Y., Wu, K., Liu, B., Peng, P., & Sun, J. (2015) · Fire Technology · doi:10.1007/s10694-015-0531-9 · Cited by 138
Nanofluid-based cooling of cylindrical lithium-ion battery packs employing forced air flow
Sefidan, A. M., Sojoudi, A., & Saha, S. C. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.03.006 · Cited by 132
Saw, L. H., Ye, Y., Yew, M. C., Chong, W. T., Yew, M. K., & Ng, T. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.022 · Cited by 132
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.162 · Cited by 132
Weng, J., Xiao, C., Ouyang, D., et al. (2021) · Energy · doi:10.1016/j.energy.2021.122087 · Cited by 132
Heat and mass transfer modeling and assessment of a new battery cooling system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.157 · Cited by 121
Mohammed, A. H., Esmaeeli, R., Aliniagerdroudbari, H., Alhadri, M., Hashemi, S. R., Nadkarni, G., & Farhad, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114106 · Cited by 120
Hazard analysis of thermally abused lithium-ion batteries at different state of charges
Liao, Z., Zhang, S., Li, K., Zhao, M., Qiu, Z., Han, D., Zhang, G., & Habetler, T. G. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101065 · Cited by 112
Heat generation in high power prismatic Li-ion battery cell with LiMnNiCoO2cathode material
Abdul-Quadir, Y., Laurila, T. T., Karppinen, J., Jalkanen, K., Vuorilehto, K., Skogström, L., & Paulasto‐Kröckel, M. (2014) · International Journal of Energy Research · doi:10.1002/er.3156 · Cited by 110
Overcharge investigation of lithium-ion polymer batteries
Zeng, Y., Wu, K. M., Wang, D., Wang, Z., & Chen, L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.009 · Cited by 108
Jilte, R. D., & Kumar, R. (2018) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2018.07.015 · Cited by 108
Wang, S., Li, Y., Li, Y., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.159 · Cited by 106
Experimental and numerical studies on air cooling and temperature uniformity in a battery pack
Shahid, S., & Agelin‐Chaab, M. (2018) · International Journal of Energy Research · doi:10.1002/er.4018 · Cited by 105
Self-citationShahid, S., & Agelin‐Chaab, M. (2017) · Energies · doi:10.3390/en10081157 · Cited by 96
Self-citationA novel phase change based cooling system for prismatic lithium ion batteries
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.12.005 · Cited by 95
Melcher, A. M., Ziebert, C., Rohde, M., & Seifert, H. J. (2016) · Energies · doi:10.3390/en9040292 · Cited by 94
Experimental investigation of a novel hybrid cooling method for lithium-ion batteries
Wei, Y., & Agelin‐Chaab, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.024 · Cited by 85
Self-citationImpact of active material surface area on thermal stability of LiCoO2 cathode
Geder, J., Hoster, H. E., Jossen, A., Garche, J., & Yu, D. Y. W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.116 · Cited by 84
Numerical and experimental characterisation of high energy density 21700 lithium-ion battery fires
Vendra, C. M. R., Shelke, A. V., Buston, J. Ε. H., Gill, J., Howard, D., Read, E., Abaza, A., Cooper, B., & Wen, J. X. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.02.014 · Cited by 83
A Thermal Runaway Simulation on a Lithium Titanate Battery and the Battery Module
Chen, M., Sun, Q., Li, Y., Wu, K., Liu, B., Peng, P., & Wang, Q. (2015) · Energies · doi:10.3390/en8010490 · Cited by 77
Overcharge cycling effect on the thermal behavior, structure, and material of lithium-ion batteries
Mao, N., Wang, Z.-R., Chung, Y., & Shu, C. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114147 · Cited by 75
Lithium Difluoro(oxalato)borate as Additive to Improve the Thermal Stability of Lithiated Graphite
Chen, Z.-H., Qin, Y., Liu, J., & Amine, K. (2009) · Electrochemical and Solid-State Letters · doi:10.1149/1.3070581 · Cited by 69
Development and experimental analysis of a hybrid cooling concept for electric vehicle battery packs
Wei, Y., & Agelin‐Chaab, M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100906 · Cited by 69
Self-citationSafety of lithium batteries in transportation
Farrington, M. D. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00565-1 · Cited by 66
Development of a simulator for both property and safety of a lithium secondary battery
Yamauchi, T., Mizushima, K., Satoh, Y., & Yamada, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.011 · Cited by 63
Liu, Y., Ouyang, C., Jiang, Q., & Liang, B. (2015) · Journal of Central South University · doi:10.1007/s11771-015-2941-8 · Cited by 61
Wang, Z., & Wang, J. (2020) · Energy · doi:10.1016/j.energy.2020.117946 · Cited by 60
Javani, N., Dinçer, İ., & Naterer, G. F. (2014) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4029053 · Cited by 58
Lithium-ion battery models: a comparative study and a model-based powerline communication
Saidani, F., Hutter, F. X., Scurtu, R., Braunwarth, W., & Burghartz, J. N. (2017) · Advances in radio science · doi:10.5194/ars-15-83-2017 · Cited by 57
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.07.072 · Cited by 49
Chen, S., Garg, A., Gao, L., et al. (2020) · International Journal of Energy Research · doi:10.1002/er.6241 · Cited by 49
Development of hybrid thermal management techniques for battery packs
Shahid, S., & Agelin‐Chaab, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116542 · Cited by 40
Self-citationYeardley, A. S., Bugryniec, P. J., Milton, R. A., & Brown, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228001 · Cited by 32
Heat transfer modeling of a novel battery thermal management system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2018.1439237 · Cited by 31
Shahid, S., & Agelin‐Chaab, M. (2018) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4041493 · Cited by 31
Self-citationPanahi, M., Heydari, H. R., & Karimi, G. (2021) · International Journal of Energy Research · doi:10.1002/er.6604 · Cited by 17
Li, Q., Shi, H., Xie, G., et al. (2021) · International Journal of Energy Research · doi:10.1002/er.6933 · Cited by 10
Lithium Battery Safety: A look at Woods Hole Oceanographic Institution’s Program
Reif, R. H., Liffers, M., Forrester, N. C., & Peal, K. R. (2010) · Professional safety · Cited by 6
Cited by
Yu, Q., Wang, C., Li, J., Xiong, R., & Pecht, M. (2023) · eTransportation · doi:10.1016/j.etran.2023.100254 · Cited by 261
Metadata
- Authors
- Shahid, S., & Agelin-Chaab, M.
- Venue
- Energy Conversion and Management: X
- Publisher
- Elsevier BV
- Published
- 2022-12
- Volume
- 16
- Pages
- 100310
- ISSN
- 2590-1745 (ISSN-L)
- OpenAlex
- W4304956821
- Cited by
- 267
- References
- 116
- FWCI
- 15.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.