The DOI matches its Crossref record; 146 of the 146 references it cites were found in a registry or an index.
On the current research progress of metallic materials fabricated by laser powder bed fusion process: a review
Open accessAbstract
Laser powder bed fusion (LPBF) is the most common metal additive manufacturing technique. Following pre-programmed designs, it employs a high-power density laser source to melt pre-alloyed or mixed powders layer by layer, allowing for complex metallic component fabrication. This technique has recently been utilised to produce superior, near-full-density three-dimensional functional parts for various industrial applications. As the LPBF technology matures, ongoing research is being conducted to increase its viability as a sustainable solution in achieving digital transformation in metallic materials and qualifying new metallic materials for digital products. This review focuses on recent developments in the LPBF technique in terms of process parameters, defects, microstructure evolution, related metallurgical phenomena, and microselective laser melting processing for miniaturised part production. First, considerable attention is given to the related parameters that affect the LPBF process, that is, powder-related and laser-related properties. Second, the metallurgical imperfections related to the LPBF products are described in terms of their types, formation mechanisms, and suppression strategies for these defects. Third, the solidification behaviour, phase transformation, and precipitation during the LPBF processing were systematically investigated. Fourth, the materials implemented in microselective laser melting for three-dimensional microfeature production on various metals are summarised. Finally, the results from this review are summarized, and future research addressing existing difficulties and promoting technical advancements are recommended.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Steady state columnar and equiaxed growth of dendrites and eutectic
Hunt, J. D. (1984) · Materials Science and Engineering · doi:10.1016/0025-5416(84)90201-5 · Cited by 1,470
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Li, X., Ji, G., Chen, Z., Addad, A., Wu, Y. X., Wang, H., Vleugels, J., Humbeeck, J. V., & Kruth, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.062 · Cited by 893
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
From rapid prototyping to home fabrication: How 3D printing is changing business model innovation
Rayna, T., & Striukova, L. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.023 · Cited by 816
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Additive manufacturing: A framework for implementation
Mellor, S., Hao, L., & Zhang, D. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.07.008 · Cited by 777
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Thijs, L., Montero Sistiaga, M. L., Wauthle, R., Xie, Q., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.036 · Cited by 672
Gu, D., & Shen, Y. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.01.013 · Cited by 672
Investigations on residual stresses and deformations in selective laser melting
Zaeh, M. F., & Branner, G. (2010) · Production Engineering · doi:10.1007/s11740-009-0192-y · Cited by 666
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.035 · Cited by 666
The cost of additive manufacturing: machine productivity, economies of scale and technology-push
Baumers, M., Dickens, P., Tuck, C., & Hague, R. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.02.015 · Cited by 658
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
Lu, Y., Wu, S., Gan, Y., Huang, T., Yang, C., Junjie, L., & Lin, J. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2015.07.009 · Cited by 600
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Raghavan, N., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., Carlson, N., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.063 · Cited by 573
Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
Kempen, K., Yasa, E., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.033 · Cited by 566
Microstructural and texture development in direct laser fabricated IN718
Parimi, L. L., Ravi, G. A., Clark, D., & Attallah, M. M. (2014) · Materials Characterization · doi:10.1016/j.matchar.2013.12.012 · Cited by 565
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Stress and deformation evaluations of scanning strategy effect in selective laser melting
Cheng, B., Shrestha, S., & Chou, K. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.007 · Cited by 504
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming, T., & Pistorius, P. C. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.002 · Cited by 487
Jiang, R., Kleer, R., & Piller, F. T. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.01.006 · Cited by 480
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Texture control during laser deposition of nickel-based superalloy
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.06.014 · Cited by 471
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
Kranz, J., Herzog, D., & Emmelmann, C. (2015) · Journal of Laser Applications · doi:10.2351/1.4885235 · Cited by 470
Bogers, M., Hadar, R., & Bilberg, A. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.024 · Cited by 457
Closed loop direct metal deposition: art to part
Mazumder, J., Dutta, D., Kikuchi, N., & Ghosh, A. (2000) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(00)00072-5 · Cited by 452
3D Printing Disrupts Manufacturing: How Economies of One Create New Rules of Competition
Petrick, I. J., & Simpson, T. W. (2013) · Research-Technology Management · doi:10.5437/08956308x5606193 · Cited by 443
Costs and Cost Effectiveness of Additive Manufacturing
Thomas, D. S., & Gilbert, S. W. (2014) · doi:10.6028/nist.sp.1176 · Cited by 443
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Mumtaz, K., & Hopkinson, N. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943397 · Cited by 429
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
Prashanth, K. G., Scudino, S., Maity, T., Das, J., & Eckert, J. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1299808 · Cited by 418
Kimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.065 · Cited by 399
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
Yasa, E., Deckers, J., & Kruth, J. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156450 · Cited by 371
Shi, R., Khairallah, S. A., Roehling, T. T., Heo, T. W., McKeown, J. T., & Matthews, M. J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.11.053 · Cited by 365
Perspectives on Additive Manufacturing
Bourell, D. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031606 · Cited by 362
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
Pham, M. S., Dovgyy, B., & Hooper, P. A. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.07.082 · Cited by 348
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Nucleation ahead of the advancing interface in directional solidification
Gäumann, M., Trivedi, R., & Kurz, W. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)80081-0 · Cited by 339
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Mutua, J., Nakata, S., Onda, T., & Chen, Z.-C. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.042 · Cited by 315
LeBrun, T., Nakamoto, T., Horikawa, K., & Kobayashi, H. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.026 · Cited by 298
Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
Liu, S., Zhu, H., Peng, G., Yin, J., & Zeng, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.022 · Cited by 279
Gao, C., Wu, W., Shi, J., Xiao, Z., & Akbarzadeh, A. H. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101378 · Cited by 279
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.08.022 · Cited by 259
Wang, D., Liu, Y., Yang, Y., & Xiao, D. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2015-0078 · Cited by 254
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Nagarajan, B., Hu, Z., Song, X., Zhai, W., & Wei, J. (2019) · Engineering · doi:10.1016/j.eng.2019.07.002 · Cited by 254
316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting
Li, R., Liu, J., Shi, Y., Du, M., & Xie, Z. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-009-9535-2 · Cited by 247
AlMangour, B., Grzesiak, D., Borkar, T., & Yang, J.-M. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.039 · Cited by 246
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Manakari, V., Parande, G., & Gupta, M. (2016) · Metals · doi:10.3390/met7010002 · Cited by 241
On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
Panwisawas, C., Qiu, C. L., Sovani, Y., Brooks, J. W., Attallah, M. M., & Basoalto, H. C. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.04.016 · Cited by 228
Fatigue strength of additively manufactured 316L austenitic stainless steel
Kumar, P., Jayaraj, R., Suryawanshi, J., Satwik, U. R., McKinnell, J., & Ramamurty, U. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.08.033 · Cited by 225
3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT
Zhou, X., Wang, D., Liu, X., Zhang, D., Qu, S., Ma, J., London, G., Shen, Z., & Liu, W. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.014 · Cited by 216
Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Troester, T., & Maier, H. J. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.07.026 · Cited by 213
Microstructure and mechanical properties of selective laser melted magnesium
Ng, C. C., Savalani, M. M., Lau, M. L., & Man, H. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.03.004 · Cited by 208
Phase field simulation of powder bed-based additive manufacturing
Lu, L., Sridhar, N., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.11.033 · Cited by 206
Weld metal composition change during conduction mode laser welding of aluminum alloy 5182
Zhao, H., & Debroy, T. (2001) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-001-0018-6 · Cited by 204
Bai, Y., Wang, D., Yang, Y., & Wang, H. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.05.115 · Cited by 204
Liu, Q. C., Elambasseril, J., Sun, S. J., Leary, M., Brandt, M., & Sharp, P. K. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.891-892.1519 · Cited by 201
Evolution of microstructure in laser deposited Al–11.28%Si alloy
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.09.051 · Cited by 190
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Wang, P., Eckert, J., Prashanth, K. G., Wu, M.-W., Kaban, I., Xi, L., & Scudino, S. (2020) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(20)65357-2 · Cited by 190
Property evaluation of 304L stainless steel fabricated by selective laser melting
Abd‐Elghany, K., & Bourell, D. L. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211250418 · Cited by 187
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
Prashanth, K. G., Shahabi, H. S., Attar, H., et al. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.01.001 · Cited by 174
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.003 · Cited by 171
Li, X., & Tan, W. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.06.019 · Cited by 170
Instability of scan tracks of selective laser sintering of high speed steel powder
Niu, H. J., & Chang, I. T. H. (1999) · Scripta Materialia · doi:10.1016/s1359-6462(99)00276-6 · Cited by 168
Liu, B., Wildman, R. D., Tuck, C. J., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15290 · Cited by 159
Zhang, C., Zhu, J., Zheng, H., Li, H., Liu, S., & Cheng, G. J. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab9ead · Cited by 158
Li, W., Liu, J., Zhou, Y., Li, S., Wen, S., Wei, Q., Yan, C., & Shi, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.07.206 · Cited by 157
Liu, Z., & Qi, H. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.046 · Cited by 150
Selective Laser Melting of Aluminum and Its Alloys
Wang, Z., Ummethala, R., Singh, N., Tang, S., Suryanarayana, C., Eckert, J., & Prashanth, K. G. (2020) · Materials · doi:10.3390/ma13204564 · Cited by 148
Melia, M., Nguyen, H.-D. A., Rodelas, J., & Schindelholz, E. J. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.02.029 · Cited by 141
Research progress on selective laser melting (SLM) of magnesium alloys: A review
Zhang, W., Wang, L.-Z., Feng, Z., & Chen, Y. (2020) · Optik · doi:10.1016/j.ijleo.2019.163842 · Cited by 141
Process Optimization and Microstructural Analysis for Selective Laser Melting of AlSi10Mg
Kempen, K., Thijs, L., Yasa, E., Badrossamay, M., Verheecke, W., & Kruth, J. (2011) · Lirias · doi:10.26153/tsw/15310 · Cited by 137
Han, Q., & Jiao, Y. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03272-y · Cited by 132
Nanoparticle-induced unusual melting and solidification behaviours of metals
Ma, C., Chen, L., Cao, C., & Li, X. (2017) · Nature Communications · doi:10.1038/ncomms14178 · Cited by 131
Stef, J., Poulon‐Quintin, A., Redjaïmia, A., Ghanbaja, J., Ferry, O., Sousa, M. D., & Gouné, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.049 · Cited by 128
Rapid manufacturing of metallic objects
Karunakaran, K. P., Bernard, A. L., Simhambhatla, S., et al. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211231644 · Cited by 122
Zou, S., Xiao, H., Ye, F., Li, Z., Tang, W., Zhu, F., Chen, C., & Zhu, C. (2020) · Results in Physics · doi:10.1016/j.rinp.2020.103005 · Cited by 112
Effects of laser scanning strategies on selective laser melting of pure tungsten
Gu, D., Guo, M., Zhang, H., Sun, Y., Wang, R., & Zhang, L. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab7b00 · Cited by 111
Microstructure and mechanical behavior of hot-work tool steels processed by Selective Laser Melting
Casati, R., Coduri, M., Lecis, N. F. M., Andrianopoli, C., & Vedani, M. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.01.015 · Cited by 101
Gu, D., & Yuan, P. (2015) · Journal of Applied Physics · doi:10.1063/1.4937905 · Cited by 98
Li, X., Shi, S., Han, S., Xiaogang, H., Zhu, Q., Lu, H., Li, W., Yusheng, S., & Hui, D. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101326 · Cited by 93
Review of Laser Powder Bed Fusion of Gamma-Prime-Strengthened Nickel-Based Superalloys
Adegoke, O., Andersson, J., Brodin, H., & Pederson, R. (2020) · Metals · doi:10.3390/met10080996 · Cited by 92
Columnar to equiaxed grain transition of laser deposited Ti6Al4V using nano-sized B4C particles
Meng, X., Min, J., Sun, Z., Zhang, W., Chang, H., & Han, Y. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108667 · Cited by 92
Numerical methods for microstructural evolutions in laser additive manufacturing
Zhang, Z., Tan, Z., Yao, X., Hu, C., Ge, P., Wan, Z. Y., Li, J. Y., & Wu, Q. (2018) · Computers & Mathematics with Applications · doi:10.1016/j.camwa.2018.07.011 · Cited by 81
Liu, C., Tong, J., Jiang, M. G., Chen, Z., Xu, G., Liao, H. B., Wang, P., Wang, X., Xu, M., & Lao, C. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138364 · Cited by 75
Structural refinement and nanomechanical response of laser remelted Al-Al2Cu lamellar eutectic
Lei, Q., Ramakrishnan, B. P., Wang, S., Wang, Y., Mazumder, J., & Misra, A. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.08.105 · Cited by 74
Streubel, R., Wilms, M. B., Doñate‐Buendía, C., Weisheit, A., Barcikowski, S., Schleifenbaum, J. H., & Gökce, B. (2018) · Japanese Journal of Applied Physics · doi:10.7567/jjap.57.040310 · Cited by 69
Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review
Zhang, P., Tan, J., Tian, Y., Yan, H., & Yu, Z. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07990-8 · Cited by 68
Su, Y., Luo, S., & Wang, Z. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155823 · Cited by 64
Kale, A. B., Singh, J., Kim, B., Kim, D., & Choi, S.-H. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.06.015 · Cited by 64
On selective laser melting of ultra high carbon steel: Effect of scan speed and post heat treatment
Taha, M. A., Yousef, A. E. S., Gany, K. A., & Sabour, H. A. (2012) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.201200030 · Cited by 62
Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings
Kim, M., Choi, Y., Kim, S., Heo, S., & Koak, J. (2017) · Materials · doi:10.3390/ma10010093 · Cited by 60
Karimi, P., Raza, T., Andersson, J., & Svensson, L.-E. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1019-1 · Cited by 60
Controlling Phase Composition in Selective Laser Melted Stainless Steels
Starr, T. L., Rafi, K., Stucker, B. E., & Scherzer, C. M. (2012) · doi:10.26153/tsw/15363 · Cited by 58
Jerrard, P. G. E., Hao, L., & Evans, K. E. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1574 · Cited by 54
The Effect of Deposition Patterns on the Deformation of Substrates During Direct Laser Fabrication
Gao, M., Wang, Z., Li, X., & Zeng, X. (2013) · Journal of Engineering Materials and Technology · doi:10.1115/1.4024195 · Cited by 45
Nandwana, P., Kirka, M. M., Paquit, V., Yoder, S., & Dehoff, R. (2018) · JOM · doi:10.1007/s11837-018-3034-6 · Cited by 39
Mulay, R. P., Moore, J., Florando, J. N., Barton, N. R., & Kumar, M. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.04.012 · Cited by 29
Cracking Behavior and Formation Mechanism of TC4 Alloy Formed by Selective Laser Melting
Zhang, S. (2013) · Journal of Mechanical Engineering · doi:10.3901/jme.2013.23.021 · Cited by 29
Rautio, T., Torbati-Sarraf, H., Allam, T., Jarvenpää, A., & Hamada, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.022 · Cited by 29
Self-citationDezfoli, A. R. A., Hwang, W., Augusto, J., Shukur, A. K., & Tzeng, S.-K. (2016) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2016.05.013 · Cited by 26
In-Process Fabrication of Carbon-Dispersed Aluminum Matrix Composite Using Selective Laser Melting
Kimura, T., Nakamoto, T., Suyama, T., & Miki, T. (2020) · Metals · doi:10.3390/met10050619 · Cited by 13
Sun, J., Zhang, C., Wang, X., & Wang, F. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-06106-3 · Cited by 4
Metadata
- Authors
- Abd-Elaziem, W., Elkatatny, S., Abd-Elaziem, A.-E., Khedr, M., Abd El-baky, M. A., Hassan, M. A., Abu-Okail, M., Mohammed, M., Järvenpää, A., Allam, T., & Hamada, A.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2022-09
- Volume
- 20
- Pages
- 681-707
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4285806628
- Cited by
- 257
- References
- 146
- FWCI
- 18.48
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.