The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A brief review of atomic layer deposition: from fundamentals to applications
Open accessAbstract
Atomic layer deposition (ALD) is a vapor phase technique capable of producing thin films of a variety of materials. Based on sequential, self-limiting reactions, ALD offers exceptional conformality on high-aspect ratio structures, thickness control at the Angstrom level, and tunable film composition. With these advantages, ALD has emerged as a powerful tool for many industrial and research applications. In this review, we provide a brief introduction to ALD and highlight select applications, including Cu(In,Ga)Se 2 solar cell devices, high-k transistors, and solid oxide fuel cells. These examples are chosen to illustrate the variety of technologies that are impacted by ALD, the range of materials that ALD can deposit – from metal oxides such as Zn 1− x Sn x O y , ZrO 2 , Y 2 O 3 , to noble metals such as Pt – and the way in which the unique features of ALD can enable new levels of performance and deeper fundamental understanding to be achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
Puurunen, R. L. (2005) · Journal of Applied Physics · doi:10.1063/1.1940727 · Cited by 2,609
High-Performance Single Layered WSe2 p-FETs with Chemically Doped Contacts
Fang, H., Chuang, S., Chang, T. C., Takei, K., Takahashi, T., & Javey, A. (2012) · Nano Letters · doi:10.1021/nl301702r · Cited by 1,862
Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends
Miikkulainen, V., Leskelä, M., Ritala, M., & Puurunen, R. L. (2013) · Journal of Applied Physics · doi:10.1063/1.4757907 · Cited by 1,413
Atomic layer deposition (ALD): from precursors to thin film structures
Leskelä, M., & Ritala, M. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(02)00117-7 · Cited by 1,314
Atomic Layer Deposition Chemistry: Recent Developments and Future Challenges
Leskelä, M., & Ritala, M. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200301652 · Cited by 1,109
Palomares, E., Clifford, J. N., Haque, S. A., Lutz, T., & Durrant, J. R. (2003) · Journal of the American Chemical Society · doi:10.1021/ja027945w · Cited by 1,067
Synthesis and Surface Engineering of Complex Nanostructures by Atomic Layer Deposition
Knez, M., Nielsch, K., & Niinistö, L. (2007) · Advanced Materials · doi:10.1002/adma.200700079 · Cited by 889
Considerations for Ultimate CMOS Scaling
Kuhn, K. J. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2193129 · Cited by 679
High-Performance Ultrathin Solid Oxide Fuel Cells for Low-Temperature Operation
Huang, H., Nakamura, M., Su, P., Fasching, R. J., Saito, Y., & Prinz, F. B. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2372592 · Cited by 513
Cited by
Chandrasekaran, S., Yao, L., Deng, L., Bowen, C., Zhang, Y., Chen, S., Lin, Z., Peng, F., & Zhang, P. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00664d · Cited by 1,199
Single-Atom Catalysts Based on the Metal–Oxide Interaction
Lang, R., Du, X., Huang, Y., Jiang, X., Zhang, Q., Guo, Y., Liu, K., Qiao, B., Wang, A., & Zhang, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00797 · Cited by 1,087
Chemical vapour deposition of zeolitic imidazolate framework thin films
Stassen, I., Styles, M., Grenci, G., Gorp, H. V., Vanderlinden, W., Feyter, S. D., Falcaro, P., Vos, D. D., Vereecken, P., & Ameloot, R. (2016) · Nature Materials · doi:10.1038/nmat4509 · Cited by 683
Heterointerface Engineering in Electromagnetic Absorbers: New Insights and Opportunities
Liang, L., Gu, W., Wu, Y., Zhang, B., Wang, G., Yang, Y., & Ji, G. (2022) · Advanced Materials · doi:10.1002/adma.202106195 · Cited by 670
New development of atomic layer deposition: processes, methods and applications
Oviroh, P. O., Akbarzadeh, R., Pan, D., Coetzee, R. A. M., & Jen, T.-C. (2019) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2019.1599694 · Cited by 536
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Conformality in atomic layer deposition: Current status overview of analysis and modelling
Cremers, V., Puurunen, R. L., & Dendooven, J. (2019) · Applied Physics Reviews · doi:10.1063/1.5060967 · Cited by 508
Shakeel Ahmad, M., Pandey, A. K., & Abd Rahim, N. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.129 · Cited by 480
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Butt, M. A. (2022) · Coatings · doi:10.3390/coatings12081115 · Cited by 434
Recent advances in the biomimicry of structural colours
Dumanli, A. G., & Savin, T. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00129g · Cited by 430
From the Bottom-Up: Toward Area-Selective Atomic Layer Deposition with High Selectivity
Mackus, A. J. M., Merkx, M. J. M., & Kessels, W. M. M. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03454 · Cited by 426
Metal organic frameworks as precursors for the manufacture of advanced catalytic materials
Oar-Arteta, L., Wezendonk, T., Sun, X., Kapteijn, F., & Gascon, J. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00007c · Cited by 361
Area-Selective Deposition: Fundamentals, Applications, and Future Outlook
Parsons, G. N., & Clark, R. D. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00722 · Cited by 360
Single-Atom Catalysts Designed and Prepared by the Atomic Layer Deposition Technique
Fonseca, J., & Lu, J. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c01200 · Cited by 344
Recent Progress on Titanium Dioxide Nanomaterials for Photocatalytic Applications
Nasr, M., Eid, C., Habchi, R., Miele, P., & Bechelany, M. (2018) · ChemSusChem · doi:10.1002/cssc.201800874 · Cited by 340
Recent Progress in Ruthenium Oxide‐Based Composites for Supercapacitor Applications
Majumdar, D., Maiyalagan, T., & Jiang, Z. (2019) · ChemElectroChem · doi:10.1002/celc.201900668 · Cited by 340
Mechanistic Understanding and the Rational Design of Sinter-Resistant Heterogeneous Catalysts
Goodman, E. D., Schwalbe, J. A., & Cargnello, M. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b01975 · Cited by 318
Li, P., Chen, S., Dai, H., Yang, Z., Chen, Z., Wang, Y., Chen, Y., Peng, W., Shan, W., & Duan, H. (2021) · Nanoscale · doi:10.1039/d0nr07539f · Cited by 314
Physics of SrTiO3-based heterostructures and nanostructures: a review
Pai, Y.-Y., Tylan-Tyler, A., Irvin, P., & Levy, J. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aa892d · Cited by 309
Interface chemistry of two-dimensional heterostructures – fundamentals to applications
Gbadamasi, S., Mohiuddin, M., Krishnamurthi, V., Verma, R., Khan, M. W., Pathak, S., Kalantar-Zadeh, K., & Mahmood, N. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01070g · Cited by 304
Research Advances of Amorphous Metal Oxides in Electrochemical Energy Storage and Conversion
Yan, S., Abhilash, K. P., Tang, L., Yang, M., Ma, Y., Xia, Q., Guo, Q., & Xia, H. (2019) · Small · doi:10.1002/smll.201804371 · Cited by 301
Eklund, P., Rosen, J., & Persson, P. O. Å. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa57bc · Cited by 298
The future for plasma science and technology
Weltmann, K., Kolb, J. F., Holub, M., Uhrlandt, D., Šimek, M., Ostrikov, K. (., Hamaguchi, S., Cvelbar, U., Černák, M., Locke, B., et al. (2019) · Plasma Processes and Polymers · doi:10.1002/ppap.201800118 · Cited by 295
Zhao, Y., Zheng, K., & Sun, X. (2018) · Joule · doi:10.1016/j.joule.2018.11.012 · Cited by 288
Sun, Y., Zhao, Y., Wang, J., Liang, J., Wang, C., Sun, Q., Lin, X., Adair, K. R., Luo, J., Wang, D., et al. (2019) · Advanced Materials · doi:10.1002/adma.201806541 · Cited by 287
Understanding chemical and physical mechanisms in atomic layer deposition
Richey, N. E., de Paula, C., & Bent, S. F. (2020) · The Journal of Chemical Physics · doi:10.1063/1.5133390 · Cited by 283
Self-citationSynthesis of Doped, Ternary, and Quaternary Materials by Atomic Layer Deposition: A Review
Mackus, A. J. M., Schneider, J. R., MacIsaac, C., Baker, J. G., & Bent, S. F. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02878 · Cited by 280
Self-citationCreating Highly Active Atomic Layer Deposited NiO Electrocatalysts for the Oxygen Evolution Reaction
Nardi, K. L., Yang, N., Dickens, C. F., Strickler, A. L., & Bent, S. F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500412 · Cited by 277
Self-citationBoaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Meng, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04449f · Cited by 260
Leng, C. Z., & Losego, M. D. (2017) · Materials Horizons · doi:10.1039/c7mh00196g · Cited by 224
Onn, T., Küngas, R., Fornasiero, P., Huang, K., & Gorte, R. (2018) · Inorganics · doi:10.3390/inorganics6010034 · Cited by 111
Lodha, J. K., Pollentier, I., Conard, T., Vallat, R., De Gendt, S., & Armini, S. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.154657 · Cited by 16
Metadata
- Authors
- Johnson, R. W., Hultqvist, A., & Bent, S. F.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2014-06
- Volume
- 17
- Issue
- 5
- Pages
- 236-246
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W2023603575
- Cited by
- 1,996
- References
- 29
- FWCI
- 43.33
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.