The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Abstract
Variety of implant materials have been employed in various disciplines of medical science depending on the requirement of a particular application. Metals, alloys, ceramics, and polymers are the commonly used biomaterials. The main focus of this study is to review the various structural and microstructural properties of titanium and titanium based alloys used as orthopaedic implants. Orthopaedic implants need to possess certain important qualities to ensure their safe and effective use. These properties like the biocompatibility, relevant mechanical properties, high corrosion and wear resistance and osseointegration are summarized in this review. Various attempts to improve upon these properties like different processing routes, surface modifications have also been inculcated in the paper to provide an insight into the extent of research and effort that has been put into developing a highly superior titanium orthopaedic implant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Bonding mechanisms at the interface of ceramic prosthetic materials
Hench, L. L., Splinter, R. J., Allen, W. C., & Greenlee, T. K. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050611 · Cited by 3,251
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
An Introduction to Bioceramics
Hench, L. L., & Wilson, J. (1993) · WORLD SCIENTIFIC eBooks · doi:10.1142/2028 · Cited by 2,307
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Hyperthermia in combined treatment of cancer
Wust, P., Hildebrandt, B., Sreenivasa, G., Rau, B., Gellermann, J., Riess, H., Felix, R., & Schlag, P. (2002) · The Lancet Oncology · doi:10.1016/s1470-2045(02)00818-5 · Cited by 1,998
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
HUISKES, R., WEINANS, H., & RIETBERGEN, B. V. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00014 · Cited by 1,213
Biological factors contributing to failures of osseointegrated oral implants, (II). Etiopathogenesis
Esposito, M., Hirsch, J., Lekholm, U., & Thomsen, P. (1998) · European Journal of Oral Sciences · doi:10.1046/j.0909-8836..t01-6-.x · Cited by 1,176
Plasma sprayed coatings of hydroxylapatite
De Groot, K., Geesink, R., Klein, C. P. A. T., & Serekian, P. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820211203 · Cited by 1,156
Electronic and optical properties of three phases of titanium dioxide: Rutile, anatase, and brookite
Mo, S.-D., & Ching, W. Y. (1995) · Physical Review B · doi:10.1103/physrevb.51.13023 · Cited by 1,089
Eliaz, N., & Metoki, N. (2017) · Materials · doi:10.3390/ma10040334 · Cited by 1,088
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Advances in biomaterials, drug delivery, and bionanotechnology
Langer, R., & Peppas, N. A. (2003) · AIChE Journal · doi:10.1002/aic.690491202 · Cited by 966
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960
Aluminium as a risk factor in Alzheimer’s disease, with emphasis on drinking water
Flaten, T. P. (2001) · Brain Research Bulletin · doi:10.1016/s0361-9230(01)00459-2 · Cited by 939
Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism
Saito, T., Furuta, T., Hwang, J.-H., Kuramoto, S., Nishino, K., Suzuki, N., Chen, R., Yamada, A., Ito, K., Seno, Y., et al. (2003) · Science · doi:10.1126/science.1081957 · Cited by 935
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
The use of titanium for medical applications in the USA
Wang, K. (1996) · Materials Science and Engineering A · doi:10.1016/0921-5093(96)10243-4 · Cited by 851
A review on the wettability of dental implant surfaces II: Biological and clinical aspects
Gittens, R. A., Scheideler, L., Rupp, F., Hyzy, S. L., Geis-Gerstorfer, J., Schwartz, Z., & Boyan, B. D. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.03.032 · Cited by 849
Clinical applications of magnetic nanoparticles for hyperthermia
Thiesen, B., & Jordan, A. (2008) · International Journal of Hyperthermia · doi:10.1080/02656730802104757 · Cited by 829
Matsuno, H. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00275-1 · Cited by 828
Gittens, R. A., McLachlan, T., Olivares-Navarrete, R., Cai, Y., Berner, S., Tannenbaum, R., Schwartz, Z., Sandhage, K. H., & Boyan, B. D. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.029 · Cited by 827
Park, J. B., & Fung, Y. C. (1980) · Journal of Biomechanical Engineering · doi:10.1115/1.3138215 · Cited by 809
Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo
Webster, T. J., & Ejiofor, J. U. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.002 · Cited by 793
Polymeric Biomaterials for Medical Implants and Devices
Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00429 · Cited by 778
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Tan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
The relationship between the nanostructure of titanium surfaces and bacterial attachment
Puckett, S. D., Taylor, E., Raimondo, T., & Webster, T. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.081 · Cited by 683
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Yang, Y., Kim, K.-H., & Ong, J. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.029 · Cited by 667
Metallic Biomaterials: Current Challenges and Opportunities
Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., Cao, A., et al. (2017) · Materials · doi:10.3390/ma10080884 · Cited by 662
A review of bioactive glasses: Their structure, properties, fabrication and apatite formation
Kaur, G., Pandey, O. P., Singh, K., Homa, D., Scott, B., & Pickrell, G. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34690 · Cited by 628
Self-citationManufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Smith, A. J., Dieppe, P., Vernon, K., Porter, M., & Blom, A. W. (2012) · The Lancet · doi:10.1016/s0140-6736(12)60353-5 · Cited by 568
The Impact of Contact Angle on the Biocompatibility of Biomaterials
Menzies, K. L., & Jones, L. (2010) · Optometry and Vision Science · doi:10.1097/opx.0b013e3181da863e · Cited by 559
Biomaterials and bone mechanotransduction
Sikavitsas, V. I., Temenoff, J. S., & Mikos, A. G. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00002-3 · Cited by 519
Biomaterials: Principles and Applications
Park, J. B., & Bronzino, J. D. (2002) · CRC Press eBooks · doi:10.1201/9781420040036 · Cited by 514
Biodegradable Materials and Metallic Implants—A Review
Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., & Berzina-Cimdina, L. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8040044 · Cited by 493
The corrosion behaviour of Ti–6Al–4V, Ti–6Al–7Nb and Ti–13Nb–13Zr in protein solutions
Khan, M. A., Williams, R. L., & Williams, D. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00217-8 · Cited by 485
Lang, N. P., Salvi, G. E., Huynh-Ba, G., Ivanovski, S., Donos, N., & Bosshardt, D. D. (2011) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2011.02172.x · Cited by 466
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Nanoparticle-mediated Hyperthermia in Cancer Therapy
Chatterjee, D. K., Diagaradjane, P., & Krishnan, S. (2011) · Therapeutic Delivery · doi:10.4155/tde.11.72 · Cited by 417
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing
Ding, R., Guo, Z. X., & Wilson, A. (2002) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(01)01531-3 · Cited by 413
Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method
Kim, H.-W., Koh, Y.-H., Li, L.-H., Lee, S., & Kim, H.-E. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.041 · Cited by 404
Spriano, S., Yamaguchi, S., Baino, F., & Ferraris, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.013 · Cited by 395
MAGNETIC NANOPARTICLE HYPERTHERMIA IN CANCER TREATMENT
GIUSTINI, A. J., PETRYK, A. A., CASSIM, S. M., TATE, J. A., BAKER, I., & HOOPES, P. J. (2010) · Nano LIFE · doi:10.1142/s1793984410000067 · Cited by 390
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Physico-chemical considerations of titanium as a biomaterial
Tengvall, P., & Lundström, I. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90056-y · Cited by 373
Tambasco de Oliveira, P., & Nanci, A. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00539-8 · Cited by 360
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Asri, R. I. M., Harun, W. S. W., Hassan, M. A., Ghani, S. A. C., & Buyong, Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.031 · Cited by 347
Bonelike Hydroxyapatite Induction by a Gel‐Derived Titania on a Titanium Substrate
Li, P., Kangasniemi, I., de Groot, K., & Kokubo, T. (1994) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1994.tb05407.x · Cited by 344
Sefton, M. V., & Lee, J. M. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90203-8 · Cited by 344
Corrosion resistance and biocompatibility of Ti–Ta alloys for biomedical applications
Zhou, Y. L., Niinomi, M., Akahori, T., Fukui, H., & Toda, H. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.03.032 · Cited by 317
Zhang, W., Wang, G., Liu, Y., Zhao, X., Zou, D., Zhu, C., Jin, Y., Huang, Q., Sun, J., Liu, X., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.01.008 · Cited by 311
Antibacterial titanium nano-patterned arrays inspired by dragonfly wings
Bhadra, C. M., Khanh Truong, V., Pham, V. T. H., Al Kobaisi, M., Seniutinas, G., Wang, J. Y., Juodkazis, S., Crawford, R. J., & Ivanova, E. P. (2015) · Scientific Reports · doi:10.1038/srep16817 · Cited by 308
Biodegradable polymers as biomaterials
Piskin, E. (1995) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856295x00175 · Cited by 288
An Introduction to Bioceramics
Hench, L. L. (2013) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/p884 · Cited by 283
Kossatz, S., Grandke, J., Couleaud, P., Latorre, A., Aires, A., Crosbie-Staunton, K., Ludwig, R., Dähring, H., Ettelt, V., Lazaro-Carrillo, A., et al. (2015) · Breast Cancer Research · doi:10.1186/s13058-015-0576-1 · Cited by 272
Materials Science and Engineering
(2014) · Apple Academic Press eBooks · doi:10.1201/b17621 · Cited by 247
Super-elastic titanium alloy with unstable plastic deformation
Hao, Y., Li, S. J., Sun, S. Y., Zheng, C., Hu, Q., & Yang, R. (2005) · Applied Physics Letters · doi:10.1063/1.2037192 · Cited by 237
Bone and metal: An orthopaedic perspective on osseointegration of metals
Goriainov, V., Cook, R., M. Latham, J., G. Dunlop, D., & Oreffo, R. O. C. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.004 · Cited by 223
Biomaterials for Skin Substitutes
Sheikholeslam, M., Wright, M. E. E., Jeschke, M. G., & Amini‐Nik, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700897 · Cited by 221
Chen, W., Shen, X., Hu, Y., Xu, K., Ran, Q., Yu, Y., Dai, L., Yuan, Z., Huang, L., Shen, T., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.055 · Cited by 217
Review and the state of the art: Sol–gel and melt quenched bioactive glasses for tissue engineering
Kaur, G., Pickrell, G., Sriranganathan, N., Kumar, V., & Homa, D. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33443 · Cited by 214
Zhang, F., Zhang, Z., Zhu, X., Kang, E.-T., & Neoh, K.-G. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.043 · Cited by 212
Mimicking the nanofeatures of bone increases bone-forming cell adhesion and proliferation
Palin, E., Liu, H., & Webster, T. J. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/9/069 · Cited by 211
Schwarz, F., Ferrari, D., Herten, M., Mihatovic, I., Wieland, M., Sager, M., & Becker, J. (2007) · Journal of Periodontology · doi:10.1902/jop.2007.070157 · Cited by 211
Chang, B., Song, W., Han, T., Yan, J., Li, F., Zhao, L., Kou, H., & Zhang, Y. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.022 · Cited by 208
Kopova, I., Stráský, J., Harcuba, P., Landa, M., Janeček, M., & Bačákova, L. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.11.043 · Cited by 204
Aluminum hydroxide injections lead to motor deficits and motor neuron degeneration
Shaw, C. A., & Petrik, M. S. (2009) · Journal of Inorganic Biochemistry · doi:10.1016/j.jinorgbio.2009.05.019 · Cited by 176
Biocompatibility Issues with Modern Implants in Bone - A Review for Clinical Orthopedics
Nuss, K. M. R., & Rechenberg, B. V. (2008) · The Open Orthopaedics Journal · doi:10.2174/1874325000802010066 · Cited by 175
SYSTEMIC ALUMINUM TOXICITY: EFFECTS ON BONE, HEMATOPOIETIC TISSUE, AND KIDNEY
E. H. Jeffery, K. A. (1996) · Journal of Toxicology and Environmental Health · doi:10.1080/009841096161122 · Cited by 174
Biomaterials in Cardiovascular Research: Applications and Clinical Implications
Jaganathan, S. K., Supriyanto, E., Murugesan, S., Balaji, A., & Asokan, M. K. (2014) · BioMed Research International · doi:10.1155/2014/459465 · Cited by 170
Systemic effects of biomaterials
Blac, J. (1984) · Biomaterials · doi:10.1016/0142-9612(84)90061-9 · Cited by 166
Tao, Z.-S., Zhou, W.-S., He, X.-W., Liu, W., Bai, B.-L., Zhou, Q., Huang, Z.-L., Tu, K.-K., Li, H., Sun, T., et al. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.01.034 · Cited by 160
Calcium phosphate formation within sol‐gel prepared titania in vitro and in vivo
Li, P., & de Groot, K. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820271205 · Cited by 157
Bioceramics for Tissue Engineering Applications – A Review
Oh, S., Oh, N., Appleford, M. R., & Ong, J. L. (2006) · American journal of biochemistry & biotechnology/American journal of biochemistry and biotechnology · doi:10.3844/ajbbsp.2006.49.56 · Cited by 143
Synthesis and characterisation of a new superelastic Ti–25Ta–25Nb biomedical alloy
Bertrand, E., Gloriant, T., Gordin, D. M., Vasilescu, E. V., Drob, P., Vasilescu, C., & Drob, S. I. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.06.007 · Cited by 136
Chen, W., Chen, C., Zi, X., Cheng, X., Zhang, X., Lin, Y. C., & Zhou, K. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.04.087 · Cited by 133
Adhesion of bioactive glass coating to Ti6Al4V oral implant
Schrooten, J., & Helsen, J. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00027-2 · Cited by 130
Wang, J., Fan, Y.-B., Gao, Y., Hu, Q., & Wang, T.-C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.008 · Cited by 129
Hk, U., Bardos, D., & Liskova-Kiar, M. (1981) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.63b3.7263759 · Cited by 126
Osteoblast response to magnesium ion‐incorporated nanoporous titanium oxide surfaces
Park, J., Kim, Y., Jang, J., & Song, H. (2010) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2010.01944.x · Cited by 121
The Effect of Magnesium Ions on Bone Bonding to Hydroxyapatite Coating on Titanium Alloy Implants
Revell, P. A., Damien, E., Zhang, X. S., Evans, P. J., & Howlett, C. R. (2003) · Key engineering materials · doi:10.4028/www.scientific.net/kem.254-256.447 · Cited by 119
Li, X., Humbeeck, J. V., & Kruth, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.019 · Cited by 117
Pacemaker contact sensitivity: Clinical recognition and management
Abdallah, H. I., Balsara, R. K., & O'Riordan, A. C. (1994) · The Annals of Thoracic Surgery · doi:10.1016/0003-4975(94)90228-3 · Cited by 111
Microstructures and Mechanical Properties of Porous Titanium Compacts Prepared by Powder Sintering
Oh, I., Nomura, N., & Hanada, S. (2002) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.43.443 · Cited by 111
Planell, J. A., Best, S. M., Lacroix, D. J., & Merolli, A. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845696610 · Cited by 109
Shi, Z., Neoh, K. G., Kang, E. T., Poh, C., & Wang, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0415 · Cited by 109
Zaffe, D., Bertoldi, C., & Consolo, U. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.020 · Cited by 108
Carcinogenicity of Inhaled Vanadium Pentoxide in F344/N Rats and B6C3F1 Mice
Ress, N. B., Chou, B. J., Renne, R. A., Dill, J. A., Miller, R. A. O., Roycroft, J. H., Hailey, J. R., Haseman, J. K., & Bucher, J. R. (2003) · Toxicological Sciences · doi:10.1093/toxsci/kfg136 · Cited by 106
Long-term antibiotic delivery by chitosan-based composite coatings with bone regenerative potential
Ordikhani, F., & Simchi, A. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.07.197 · Cited by 103
Zhao, L., Hu, Y., Xu, D., & Cai, K. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.05.002 · Cited by 103
Shah, F. A., Johansson, M. L., Omar, O., Hanna, S., Palmquist, A., & Thomsen, P. (2016) · PLoS ONE · doi:10.1371/journal.pone.0157504 · Cited by 101
Matsumoto, H., Ochi, M., Abiko, Y., Hirose, Y., Kaku, T., & Sakaguchi, K. (2000) · Clinical Oral Implants Research · doi:10.1034/j.1600-0501.2000.011004354.x · Cited by 93
The response of bone to nanocrystalline hydroxyapatite-coated Ti13Nb11Zr alloy in an animal model
Bigi, A., Fini, M., Bracci, B., Boanini, E., Torricelli, P., Giavaresi, G., Aldini, N. N., Facchini, A., Sbaiz, F., & Giardino, R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.011 · Cited by 90
Yu, J., Xu, L., Li, K., Xie, N., Xi, Y., Wang, Y., Zheng, X., Chen, X., Wang, M., & Ye, X. (2017) · Scientific Reports · doi:10.1038/s41598-017-03661-5 · Cited by 87
Williams, H. M. (2017) · Bioscience Horizons The International Journal of Student Research · doi:10.1093/biohorizons/hzx009 · Cited by 87
Fatigue properties of a dental implant produced by electron beam melting ® (EBM)
Jamshidinia, M., Wang, L., Tong, W., Ajlouni, R., & Kovacevic, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.07.013 · Cited by 86
Oh, Y., Santhamoorthy, M., Manivasagan, P., Bharathiraja, S., & Oh, J. (2016) · Biochimie · doi:10.1016/j.biochi.2016.11.012 · Cited by 86
Novel antioxidant capability of titanium induced by UV light treatment
Ueno, T., Ikeda, T., Tsukimura, N., Ishijima, M., Minamikawa, H., Sugita, Y., Yamada, M., Wakabayashi, N., & Ogawa, T. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.08.050 · Cited by 83
Yan, L., Yuan, Y., Ouyang, L., Li, H., Mirzasadeghi, A., & Li, L. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.07.002 · Cited by 82
Li, K., Wang, C., Yan, J., Zhang, Q., Dang, B., Wang, Z., Yao, Y., Lin, K. L., Guo, Z., Bi, L., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-19742-y · Cited by 79
Xu, G., Shen, X., Hu, Y., Ma, P., & Cai, K. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.04.024 · Cited by 78
Metal particles and tissue changes adjacent to miniplates A retrieval study
Torgersen, S., Gjerdet, N. R., Erichsen, E. S., & Bang, G. (1995) · Acta Odontologica Scandinavica · doi:10.3109/00016359509005948 · Cited by 75
Biomedical applications of natural-based polymers combined with bioactive glass nanoparticles
Leite, Á. J., & Mano, J. F. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00404d · Cited by 75
A New Biocompatible and Antibacterial Phosphate Free Glass-Ceramic for Medical Applications
Cabal, B., Alou, L., Cafini, F., Couceiro, R., Sevillano, D., Esteban‐Tejeda, L., Guitián, F., Torrecillas, R., & Moya, J. S. (2014) · Scientific Reports · doi:10.1038/srep05440 · Cited by 73
Ikarashi, Y., Toyoda, K., Ohsawa, N., Uchima, T., Tsuchiya, T., KANIWA, M., Sato, M., Takahashi, M., & NAKAMURA, A. (1992) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820260306 · Cited by 65
Nanotubular topography enhances the bioactivity of titanium implants
Huang, J., Zhang, X., Yan, W., Chen, Z., Shuai, X., Wang, A., & Wang, Y. (2017) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2017.03.017 · Cited by 65
Ke, D., Robertson, S. F., Dernell, W. S., Bandyopadhyay, A. K., & Bose, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05574 · Cited by 65
Veronesi, F., Giavaresi, G., Fini, M., Longo, G., Ioannidu, C. A., d’Abusco, A. S., Superti, F., Panzini, G., Misiano, C., Palattella, A., et al. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.08.076 · Cited by 64
Li, X., Huang, Q., Liu, L., Zhu, W., Elkhooly, T. A., Liu, Y., Feng, Q., Li, Q., Zhou, S., Liu, Y., et al. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.07.032 · Cited by 59
He, F., Yang, G., Li, Y. N., Wang, X. X., & Zhao, S. F. (2009) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2009.03.716 · Cited by 58
Park, J. H., Schwartz, Z., Olivares‐Navarrete, R., Boyan, B. D., & Tannenbaum, R. (2011) · Langmuir · doi:10.1021/la2000415 · Cited by 55
Ren, B., Wan, Y., Wang, G., Liu, Z., Huang, Y. H., & Wang, H. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2554-3 · Cited by 50
STUDIES ON THE RELATIONSHIP OF THE CHEMICAL CONSTITUENTS OF BLOOD AND CEREBROSPINAL FLUID
Kubie, L. S., & Shults, G. M. (1925) · The Journal of Experimental Medicine · doi:10.1084/jem.42.4.565 · Cited by 42
Xu, G., Shen, X., Dai, L., Ran, Q., Ma, P., & Cai, K. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.08.050 · Cited by 42
Early dental implant failure: A review of the literature
dos Santos, M. C. L. G., Campos, M. I. G., & Line, S. R. P. (2002) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · doi:10.20396/bjos.v1i3.8641045 · Cited by 42
Naghizadeh, F., Kadir, M. R. A., Doostmohammadi, A., Roozbahani, F., Iqbal, N., Taheri, M. M., Naveen, S. V., & Kamarul, T. (2015) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2015.07.017 · Cited by 39
Frutos, E., Karlı́k, M., Jiménez, J. A., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.014 · Cited by 35
Characterization of SiO2–Na2O–Fe2O 3–CaO–P2O 5–B 2O 3 glass ceramics
Singh, K. B., & Bahadur, D. (1999) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008949025635 · Cited by 33
Self-citationTissue engineering – nanomaterials in the musculoskeletal system
Egli, R. J., & Luginbühl, R. (2012) · Swiss Medical Weekly · doi:10.4414/smw.2012.13647 · Cited by 22
Urbański, W., Marycz, K., Krzak, J., Pezowicz, C., & Dragan, S. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s114885 · Cited by 18
Cited by
Biomedical Applications of Titanium Alloys: A Comprehensive Review
Marin, E., & Lanzutti, A. (2023) · Materials · doi:10.3390/ma17010114 · Cited by 489
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Machine Learning‐Driven Biomaterials Evolution
Suwardi, A., Wang, F., Xue, K., Han, M., Teo, P., Wang, P., Wang, S., Liu, Y., Ye, E., Li, Z., et al. (2022) · Advanced Materials · doi:10.1002/adma.202102703 · Cited by 299
Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
Antimicrobial TiO2 nanocomposite coatings for surfaces, dental and orthopaedic implants
Kumaravel, V., Nair, K. M., Mathew, S., Bartlett, J., Kennedy, J. E., Manning, H. G., Whelan, B. J., Leyland, N. S., & Pillai, S. C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129071 · Cited by 266
Metadata
- Authors
- Kaur, M., & Singh, K.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 102
- Pages
- 844-862
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2942232582
- Cited by
- 1,451
- References
- 134
- FWCI
- 52.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.