Utilizing ink composition to tune bulk-electrode gas transport, performance, and operational robustness for a Fe–N–C catalyst in polymer electrolyte fuel cell
Open accessThe DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Abstract With lower site density and turnover frequency, platinum group metal (PGM)-free catalysts based electrodes are often greater than 50 μm thick in order to increase performance across the fuel cell operating range. Consequently, PGM-free electrodes have an additional bulk electrode transport resistance beyond the local or aggregate level transport in thin platinum-based electrodes. In parallel to the development of more active and durable PGM-free catalysts, advancements in understanding the interplay between PGM-free electrode fabrication, bulk-electrode transport, proton conductivity and performance are needed. Here, the relationship between ionic and gas phase transport through the electrode thickness is modified by adjusting electrocatalyst and ionomer flocculation/interaction at the ink level. The influence of the ink composition (water/n-propanol content) is examined via various in-situ electrochemical and ex-situ characterization techniques and the resulting electrode structure/performance relationship contrasted with electrode performance robustness across a range of relative humidity (RH). For the electrocatalyst examined here, a water-rich (82 wt% H2O) ink formulation was favorable for operation at high RH due to improved molecular diffusion through larger electrode pores. In contrast, the improved interactions between ionomer and electrocatalyst enabled a more robust electrode and higher performance during low RH operation for the 50 wt% H2O content ink.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Boosting Fuel Cell Performance with Accessible Carbon Mesopores
Yarlagadda, V., Carpenter, M. K., Moylan, T. E., Kukreja, R. S., Koestner, R., Gu, W., Thompson, L., & Kongkanand, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00186 · Cited by 686
PGM‐Free Cathode Catalysts for PEM Fuel Cells: A Mini‐Review on Stability Challenges
Shao, Y., Dodelet, J., Wu, G., & Zelenay, P. (2019) · Advanced Materials · doi:10.1002/adma.201807615 · Cited by 553
Passalacqua, E., Lufrano, F., Squadrito, G., Patti, A., & Giorgi, L. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00679-4 · Cited by 440
Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC
Orfanidi, A., Rheinländer, P. J., Schulte, N., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1251814jes · Cited by 169
Choi, J.-Y., Yang, L., Kishimoto, T., Fu, X., Ye, S., Chen, Z., & Banham, D. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03005j · Cited by 162
Integrating PGM‐Free Catalysts into Catalyst Layers and Proton Exchange Membrane Fuel Cell Devices
Banham, D., Choi, J., Kishimoto, T., & Ye, S. (2019) · Advanced Materials · doi:10.1002/adma.201804846 · Cited by 157
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Self-citationVan Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17614 · Cited by 148
Self-citationInherent Acidity of Perfluorosulfonic Acid Ionomer Dispersions and Implications for Ink Aggregation
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b06493 · Cited by 122
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Research works printed but not linked: 70
- da Graça Carvalho, 2011, Building a low carbon society, Energy, 36, 1842, 10.1016/j.energy.2010.09.030 · DOI
- Poizot, 2011, Clean energy new deal for a sustainable world: from non-CO2 generating energy sources to greener electrochemical storage devices, Energy Environ. Sci., 4, 2003, 10.1039/c0ee00731e · DOI · Paper page
- Lemke, 2015, MELY: market model for water electrolysis – electrolysis' economic potential given its technological feasibility, Energy Procedia, 73, 59, 10.1016/j.egypro.2015.07.562 · DOI
- Ligen, 2018, Mobility from renewable electricity: infrastructure comparison for battery and hydrogen fuel cell vehicles, World Electr. Veh. J., 9, 3, 10.3390/wevj9010003 · DOI
- Durst, 2015, Hydrogen oxidation and evolution reaction kinetics on carbon supported Pt, Ir, Rh, and Pd electrocatalysts in acidic media, J. Electrochem. Soc., 162, F190, 10.1149/2.0981501jes · DOI · Paper page
- Feng, 2008, Nonprecious metal catalysts for the molecular oxygen-reduction reaction, Phys. Status Solidi, 245, 1792, 10.1002/pssb.200879537 · DOI · Paper page
- Jaouen, 2011, Recent advances in non-precious metal catalysis for oxygen-reduction reaction in polymer electrolyte fuel cells, Energy Environ. Sci., 4, 114, 10.1039/C0EE00011F · DOI · Paper page
- Banham, 2017, Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective, ACS Energy Lett, 2, 629, 10.1021/acsenergylett.6b00644 · DOI · Paper page
- Gasteiger, 2005, Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs, Appl. Catal. B Environ., 56, 9, 10.1016/j.apcatb.2004.06.021 · DOI · Paper page
- Wang, 2019, Iron-free cathode catalysts for proton-exchange-membrane fuel cells: cobalt catalysts and the peroxide mitigation approach, Adv. Mater., 1805126, 1805126, 10.1002/adma.201805126 · DOI · Paper page
- Martinez, 2019, Progress in the development of Fe-based PGM-free electrocatalysts for the oxygen reduction reaction, Adv. Mater., 1806545, 10.1002/adma.201806545 · DOI · Paper page
- Osmieri, 2019, Transition metal–nitrogen–carbon (M–N–C) catalysts for oxygen reduction reaction. Insights on synthesis and performance in polymer electrolyte fuel cells, ChemEngineering, 3, 10.3390/chemengineering3010016 · DOI
- Barkholtz, 2017, Advancements in rationally designed PGM-free fuel cell catalysts derived from metal–organic frameworks, Mater. Horizons., 4, 20, 10.1039/C6MH00344C · DOI · Paper page
- Othman, 2012, Non precious metal catalysts for the PEM fuel cell cathode, Int. J. Hydrogen Energy, 37, 357, 10.1016/j.ijhydene.2011.08.095 · DOI · Paper page
- Thompson, 2019, Platinum group metal-free catalysts boost cost competitiveness of fuel cell vehicles, Nat. Catal., 2, 558, 10.1038/s41929-019-0291-x · DOI · Paper page
- Osmieri, 2019, Elucidation of PGM-free electrocatalyst active site functionality via in-situ X-ray absorption and operando determination of oxygen reduction reaction kinetics in a PEFC, Appl. Catal. B Environ., 257, 117929, 10.1016/j.apcatb.2019.117929 · DOI · Paper page
- Cetinbas, 2018, Agglomerates in polymer electrolyte fuel cell electrodes: Part II. Transport characterization, J. Electrochem. Soc., 165, F1059, 10.1149/2.0301813jes · DOI
- Komini Babu, 2016, Resolving electrode morphology's impact on platinum group metal-free cathode performance using nano-CT of 3D hierarchical pore and ionomer distribution, ACS Appl. Mater. Interfaces, 8, 32764, 10.1021/acsami.6b08844 · DOI · Paper page
- Yin, 2017, Effects of MEA fabrication and ionomer composition on fuel cell performance of PGM-free ORR catalyst, ECS Trans, 77, 1273
- Jaouen, 2018, Toward platinum group metal-free catalysts for hydrogen/air proton-exchange membrane fuel cells, Johnson Matthey Technol. Rev., 62, 231, 10.1595/205651318X696828 · DOI · Paper page
- Gittleman, 2019, Materials research and development focus areas for low cost automotive proton-exchange membrane fuel cells, Curr. Opin. Electrochem., 18, 81, 10.1016/j.coelec.2019.10.009 · DOI · Paper page
- Wang, 2020, Elucidating the role of ionomer in the performance of platinum group metal-free catalyst layer via in-situ electrochemical diagnostics, J. Electrochem. Soc., 167
- Osmieri, 2020, Use of a segmented cell for the combinatorial development of platinum group metal-free electrodes for polymer electrolyte fuel cells, J. Power Sources, 452, 227829, 10.1016/j.jpowsour.2020.227829 · DOI
- Osmieri, 2017, Performance of a Fe-N-C catalyst for the oxygen reduction reaction in direct methanol fuel cell: cathode formulation optimization and short-term durability, Appl. Catal. B Environ., 201, 253, 10.1016/j.apcatb.2016.08.043 · DOI · Paper page
- Garsany, 2018, Improving PEMFC performance using short-side-chain low-equivalent-weight PFSA ionomer in the cathode catalyst layer, J. Electrochem. Soc., 165, F381, 10.1149/2.1361805jes · DOI · Paper page
- Lee, 2004, A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC, J. Power Sources, 131, 200, 10.1016/j.jpowsour.2003.12.039 · DOI · Paper page
- Liu, 2019, Understanding the role of interfaces for water management in platinum group metal-free electrodes in polymer electrolyte fuel cells, ACS Appl. Energy Mater., 2, 3542, 10.1021/acsaem.9b00292 · DOI
- Ahluwalia, 2019, Activity of atomically dispersed (AD) Fe-C-N ORR catalyst in polymer electrolyte fuel cell environment, J. Electrochem. Soc., 166, F1096, 10.1149/2.0851914jes · DOI
- Osmieri, 2016, The use of different types of reduced graphene oxide in the preparation of Fe-N-C electrocatalysts: capacitive behavior and oxygen reduction reaction activity in alkaline medium, J. Solid State Electrochem., 20, 3507, 10.1007/s10008-016-3332-2 · DOI
- Frackowiak, 2001, Carbon materials for the electrochemical storage of energy in capacitors, Carbon N. Y., 39, 937, 10.1016/S0008-6223(00)00183-4 · DOI · Paper page
- Easton, 2005, An electrochemical impedance spectroscopy study of fuel cell electrodes, Electrochim. Acta, 50, 2469, 10.1016/j.electacta.2004.10.074 · doi:10.1016/j.electacta.2004.10.074
- Li, 2003, Ionic conductivity of PEMFC electrodes, J. Electrochem. Soc., 150, C745, 10.1149/1.1611493 · DOI · Paper page
- Lefebvre, 1999, Characterization of ionic conductivity profiles within proton exchange membrane fuel cell gas diffusion electrodes by impedance spectroscopy, Electrochem. Solid State Lett., 2, 259, 10.1149/1.1390804 · DOI · Paper page
- Makharia, 2005, Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy, J. Electrochem. Soc., 152, A970A, 10.1149/1.1888367 · DOI · Paper page
- Star, 2020, Mass transport characterization of platinum group metal-free polymer electrolyte fuel cell electrodes using a differential cell with an integrated electrochemical sensor, J. Power Sources, 450, 227655, 10.1016/j.jpowsour.2019.227655 · DOI
- Mauger, 2020, Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies, J. Power Sources, 450, 227581, 10.1016/j.jpowsour.2019.227581 · DOI · Paper page
- Baker, 2009, Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods, J. Electrochem. Soc., 156, B991, 10.1149/1.3152226 · DOI · Paper page
- Kabir, 2019, Elucidating the dynamic nature of fuel cell electrodes as a function of Conditioning : an ex-situ materials characterization and in-situ electrochemical diagnostic study, ACS Appl. Mater. Interfaces, 11, 45016, 10.1021/acsami.9b11365 · DOI · Paper page
- Cetinbas, 2017, Microstructural analysis and transport resistances of low-platinum-loaded PEFC electrodes, J. Electrochem. Soc., 164, F1596, 10.1149/2.1111714jes · DOI · Paper page
- Ilavsky, 2013, Ultra-small-angle X-ray scattering instrument at the advanced photon source: history, recent development, and current status, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 44, 68, 10.1007/s11661-012-1431-y · DOI · Paper page
- Ilavsky, 2009, Irena: tool suite for modeling and analysis of small-angle scattering, J. Appl. Crystallogr., 42, 347, 10.1107/S0021889809002222 · DOI · Paper page
- Safiollah, 2015, Model of water sorption and swelling in polymer electrolyte membranes: diagnostic applications, J. Phys. Chem. B, 119, 8165, 10.1021/acs.jpcb.5b00486 · DOI
- Eikerling, 2011, Poroelectroelastic theory of water sorption and swelling in polymer electrolyte membranes, Soft Matter, 7, 5976, 10.1039/c1sm05273j · DOI · Paper page
- Yin, 2018, Kinetic models for the degradation mechanisms of PGM-free ORR catalysts, ECS Trans, 85, 1239, 10.1149/08513.1239ecst · DOI · Paper page
- Chlistunoff, 2011, RRDE and voltammetric study of ORR on pyrolyzed Fe/polyaniline catalyst. On the origins of variable tafel slopes, J. Phys. Chem. C, 115, 6496, 10.1021/jp108350t · DOI
- Li, 2017, Asymmetric volcano trend in oxygen reduction activity of Pt and non-Pt catalysts: in situ identification of the site-blocking effect, J. Am. Chem. Soc., 139, 1384, 10.1021/jacs.6b11072 · DOI · Paper page
- Monteverde Videla, 2015, Varying the morphology of Fe-N-C electrocatalysts by templating Iron Phthalocyanine precursor with different porous SiO2 to promote the Oxygen Reduction Reaction, Electrochim. Acta, 177, 43, 10.1016/j.electacta.2015.01.165 · DOI
- Jia, 2015, Experimental observation of redox-induced Fe-N switching behavior as a determinant role for oxygen reduction activity, ACS Nano, 9, 12496, 10.1021/acsnano.5b05984 · DOI · Paper page
- Chung, 2017, Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst, Science, 357, 479, 10.1126/science.aan2255 · DOI · Paper page
- Xing, 2015, Numerical analysis of the optimum membrane/ionomer water content of PEMFCs: the interaction of Nafion® ionomer content and cathode relative humidity, Appl. Energy, 138, 242, 10.1016/j.apenergy.2014.10.011 · DOI · Paper page
- Song, 2013, Effects of nanoparticle geometry and size distribution on diffusion impedance of battery electrodes, J. Electrochem. Soc., 160, A15, 10.1149/2.023301jes · DOI · Paper page
- Obermaier, 2018, A comprehensive physical impedance model of polymer electrolyte fuel cell cathodes in oxygen-free atmosphere, Sci. Rep., 8, 1, 10.1038/s41598-018-23071-5 · DOI
- Neyerlin, 2007, Cathode catalyst utilization for the ORR in a PEMFC, J. Electrochem. Soc., 154, B279, 10.1149/1.2400626 · DOI · Paper page
- Jacobsen, 1995, Diffusion impedance IN planar, cylindrical and spherical symmetry, Electrochim. Acta, 40, 255, 10.1016/0013-4686(94)E0192-3 · doi:10.1016/0013-4686(94)e0192-3
- Meyers, 2002, The impedance response of a porous electrode composed of intercalation particles, J. Electrochem. Soc., 147, 2930, 10.1149/1.1393627 · DOI · Paper page
- Modestino, 2013, Self-assembly and transport limitations in confined nafion films, Macromolecules, 46, 867, 10.1021/ma301999a · DOI · Paper page
- Paul, 2014, Conductivity and wettability changes of ultrathin nafion films subjected to thermal annealing and liquid water exposure, J. Phys. Chem. C, 118, 1828, 10.1021/jp410510x · DOI · Paper page
- Dudenas, 2019, Evolution of ionomer morphology from dispersion to film: an in situ X-ray study, Macromolecules, 7779, 10.1021/acs.macromol.9b01024 · DOI · Paper page
- Litster, 2013, Morphological analyses of polymer electrolyte fuel cell electrodes with nano-scale computed tomography imaging, Fuel Cell., 13, 935, 10.1002/fuce.201300008 · DOI
- Epting, 2012, Resolving the three-dimensional microstructure of polymer electrolyte fuel cell electrodes using nanometer-scale X-ray computed tomography, Adv. Funct. Mater., 22, 555, 10.1002/adfm.201101525 · DOI · Paper page
- Komini Babu, 2015, Multiple imaging mode X-ray computed tomography for distinguishing active and inactive phases in lithium-ion battery cathodes, J. Power Sources, 283, 314, 10.1016/j.jpowsour.2015.02.086 · doi:10.1016/j.jpowsour.2015.02.086
- Komini Babu, 2014, Modeling hierarchical non-precious metal catalyst cathodes for PEFCs using multi-scale X-ray CT imaging, ECS Trans, 64, 281, 10.1149/06403.0281ecst · DOI · Paper page
- Takahashi, 2017, Observation of ionomer in catalyst ink of polymer electrolyte fuel cell using cryogenic transmission electron microscopy, Electrochim. Acta, 224, 178, 10.1016/j.electacta.2016.12.068 · DOI
- Pang, 2007, Densities and viscosities of aqueous solutions of 1-propanol and 2-propanol at temperatures from 293.15 K to 333.15 K, J. Mol. Liq., 136, 71, 10.1016/j.molliq.2007.01.003 · doi:10.1016/j.molliq.2007.01.003
- Chlistunoff, 2016, On the use of Nafion® in electrochemical studies of carbon supported oxygen reduction catalysts in aqueous media, J. Electroanal. Chem., 780, 134, 10.1016/j.jelechem.2016.09.014 · DOI
- Andrews, 2017, An in situ USAXS-SAXS-WAXS study of precipitate size distribution evolution in a model Ni-based alloy, J. Appl. Crystallogr., 50, 734, 10.1107/S1600576717006446 · DOI
- Beaucage, 1996, Small-angle scattering from polymeric mass fractals of arbitrary mass-fractal dimension, J. Appl. Crystallogr., 29, 134, 10.1107/S0021889895011605 · DOI · Paper page
- Litster, 2004, PEM fuel cell electrodes, J. Power Sources, 130, 61, 10.1016/j.jpowsour.2003.12.055 · DOI · Paper page
- Thompson, 2011, Proton conduction on ionomer-free Pt surfaces, ECS Trans, 41, 709, 10.1149/1.3635605 · DOI
- Liu, 2018, Proton transport in ionomer-free regions of polymer electrolyte fuel cells and implications for oxygen reduction reaction, Curr. Opin. Electrochem., 12, 202, 10.1016/j.coelec.2018.11.015 · DOI
Cited by
Gong, Q., Li, C., Liu, Y., Ilavsky, J., Guo, F., Cheng, X., & Xie, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06711 · Cited by 72
Van Cleve, T., Wang, G., Mooney, M., Cetinbas, C. F., Kariuki, N., Park, J., Farghaly, A., Myers, D., & Neyerlin, K. C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228889 · Cited by 66
Self-citationImpact of Dispersion Solvent on Ionomer Thin Films and Membranes
Berlinger, S. A., Dudenas, P. J., Bird, A., Chen, X., Freychet, G., McCloskey, B. D., Kusoglu, A., & Weber, A. Z. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01076 · Cited by 65
Ren, H., Meng, X., Lin, Y., & Shao, Z. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230698 · Cited by 53
Stoll, J., Jeong, J., Huynh, P., & Kjeang, E. (2024) · Journal of the Electrochemical Society · doi:10.1149/1945-7111/ad4c11 · Cited by 6
Metadata
- Authors
- Osmieri, L., Wang, G., Cetinbas, F. C., Khandavalli, S., Park, J., Medina, S., Mauger, S. A., Ulsh, M., Pylypenko, S., Myers, D. J., & Neyerlin, K. C.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 75
- Pages
- 104943
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W3031577718
- Cited by
- 90
- References
- 12
- FWCI
- 5.06
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (am, 289 d)
- Funders
- Fuel Cell Technologies Office
- U.S. Department of Energy
- National Renewable Energy Laboratory
- Office of Science
- Argonne National Laboratory
- Office of Energy Efficiency and Renewable Energy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Utilizing ink composition to tune bulk-electrode gas transport, performance, and operational robustness for a Fe–N–C catalyst in polymer electrolyte fuel cell. https://app.cochat.ai/papers/10.1016/j.nanoen.2020.104943
- The paper
- Osmieri, L., Wang, G., Cetinbas, F. C., Khandavalli, S., Park, J., Medina, S., Mauger, S. A., Ulsh, M., Pylypenko, S., Myers, D. J., & Neyerlin, K. C. (2020). Utilizing ink composition to tune bulk-electrode gas transport, performance, and operational robustness for a Fe–N–C catalyst in polymer electrolyte fuel cell. Nano Energy. https://doi.org/10.1016/j.nanoen.2020.104943
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.