Improving the ductility and heat deflection temperature of injection molded Poly(lactic acid) products: A comprehensive review
Open accessThe DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
The widely used plastic products which became a part of our everyday life are produced almost entirely from crude oil. There are various estimates on oil resources, but there is an increasing need to use other, preferably renewable resources to produce plastic products. Although plastics from renewable resources, bio-based, and inherently biodegradable plastics, or so-called bioplastics/biopolymers, are already on the market, their properties are not always adequate compared to those of “ordinary” petroleum-based plastics, which the bioplastic is supposed to replace. One of the most promising bioplastics nowadays is Poly(lactic acid) (PLA). Despite the great potential of PLA to replace petroleum-based engineering plastics, such as Acrylonitrile Butadiene Styrene (ABS), Polypropylene (PP), and others, the inherent brittleness and low Heat Deflection Temperature (HDT) hinders the widespread application of PLA. Many methods have been developed to improve the properties of PLA, but its widespread industrial application is still rather an exception than the rule. The current study aims to survey the progress in the modification of the properties of PLA. We focused on the most effective additives to improve the properties of injection molded PLA products, which we selected from a comprehensive literature review. Most of the modification possibilities presented in this review can also be used for other processing technologies, but in the discussion, we focused on their use in injection molding.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
Jian, J., Xiangbin, Z., & Xianbo, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.001 · Cited by 625
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Pillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Plasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Effect of the addition of poly (D-lactic acid) on the thermal property of poly (L-lactic acid)
Yamane, H., & Sasai, K. (2003) · Polymer · doi:10.1016/s0032-3861(03)00092-2 · Cited by 266
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Pluta, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.057 · Cited by 247
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00609-8 · Cited by 238
Crystallinity and mechanical properties of optically pure polylactides and their blends
Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214
Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites
Ke, T., & Sun, X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12162 · Cited by 200
Arrieta, M. P., Castro-López, M. D. M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf5029812 · Cited by 196
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
Hassan, E., Wei, Y., null, H. J., & Muhuo, Y. (2013) · Journal of Fiber Bioengineering and Informatics · doi:10.3993/jfbi03201308 · Cited by 124
Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
Carbonell-Verdu, A., Ferri, J. M., Dominici, F., Boronat, T., Sanchez-Nacher, L., Balart, R., & Torre, L. (2018) · Express Polymer Letters · doi:10.3144/expresspolymlett.2018.69 · Cited by 91
Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends
Okamoto, K., Ichikawa, T., Yokohara, T., & Yamaguchi, M. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.011 · Cited by 85
Ljungberg, N., Colombini, D., & Wesslén, B. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21163 · Cited by 73
Xiao, X., Chevali, V. S., Song, P., Yu, B., Yang, Y., & Wang, H. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100385 · Cited by 60
Xu, H., Tang, S., Chen, J., Yin, P., Pu, W., & Lu, Y. (2012) · Polymer Bulletin · doi:10.1007/s00289-011-0673-y · Cited by 25
Cited by
Enzymes’ Power for Plastics Degradation
Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 590
da Silva Pens, C. J., Klug, T. V., Stoll, L., Izidoro, F., Flores, S. H., & de Oliveira Rios, A. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101230 · Cited by 83
Deformation of Poly-l-lactid acid (PLLA) under Uniaxial Tension and Plane-Strain Compression
Vozniak, A., & Bartczak, Z. (2021) · Polymers · doi:10.3390/polym13244432 · Cited by 11
“The big endothermic peak actually consists of two overlapping peaks, which are due to recrystallization (α′→α) and the melting of crystals of the α form, respectively [55].”
BackgroundInfluentialLicea-Saucedo, D. C., Rodrigue, D., Cisneros-López, E. O., & González-Núñez, R. (2023) · Journal of Plastic Film & Sheeting · doi:10.1177/87560879231153702 · Cited by 9
Metadata
- Authors
- Tábi, T., Ageyeva, T., & Kovács, J. G.
- Venue
- Polymer Testing
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 101
- Pages
- 107282
- ISSN
- 0142-9418 (ISSN-L)
- OpenAlex
- W3179046037
- Cited by
- 119
- References
- 45
- FWCI
- 4.76
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.