The DOI matches its Crossref record; 122 of the 122 references it cites were found in a registry or an index.
How the combination of Circular Economy and Industry 4.0 can contribute towards achieving the Sustainable Development Goals
Abstract
The 17 Sustainable Development Goals (SDG) are an interconnected strategy for the promotion of sustainable practices and solutions that addresses the main issues faced by our society. Concomitantly, two emerging topics are currently gaining interest due to their potential to implement systematic shifts and contribute to achieving the SDG – Circular Economy (CE) and Industry 4.0 (I4.0). This research performed a systematic literature review to identify how the CE-I4.0 nexus, the combination of CE practices and I4.0 technologies, could contribute to achieving the SDG. A total of 50 peer-review articles that addressed the simultaneous or individual link between CE and I4.0 to sustainability form the review portfolio. The articles were first screened with regard to the I4.0 technologies and CE practices applied, and further analyzed in order to understand the stronger links to the SDG. Findings show that the CE-I4.0 nexus directly benefits SDG 7, SDG 8, SDG 9, SDG 11, SDG 12, and SDG 13. The specific targets addressed by the combined implementation of CE practices and I4.0 technologies are disclosed and discussed. We argue that the CE-I4.0 nexus is pivotal in the endeavors to reach the SDG, as it connects innovative technologies with novel circular production and business models, which ultimately brings the opportunity to tackle the SDG targets intensified in this study. Further research could quantitatively address the impacts of the CE-I4.0 nexus, investigate secondary effects on the SDG, or develop further case studies under the CE-I4.0 umbrella.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transforming Our World: The 2030 Agenda for Sustainable Development
(2018) · A New Era in Global Health · doi:10.1891/9780826190123.ap02 · Cited by 19,351
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Planetary Boundaries: Exploring the Safe Operating Space for Humanity
Rockström, J., Steffen, W., Noone, K., Persson, Å., Chapin, F. S. I., Lambin, E., Lenton, T. M., Scheffer, M., Folke, C., Schellnhuber, H. J., et al. (2009) · Ecology and Society · doi:10.5751/es-03180-140232 · Cited by 7,187
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Blockchains and smart contracts for the internet of things
Christidis, K., & Devetsikiotis, M. (2016) · IEEE Access · doi:10.1109/access.2016.2566339 · Cited by 4,552
Circular economy: The concept and its limitations
Korhonen, J., Honkasalo, A., & Seppälä, J. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2017.06.041 · Cited by 3,961
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
Three pillars of sustainability: in search of conceptual origins
Purvis, B., Mao, Y., & Robinson, D. (2019) · Sustainability Science · doi:10.1007/s11625-018-0627-5 · Cited by 3,279
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012
Intelligent Manufacturing in the Context of Industry 4.0: A Review
Zhong, R. Y., Xu, X., Klotz, E., & Newman, S. T. (2017) · Engineering · doi:10.1016/j.eng.2017.05.015 · Cited by 2,913
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
Blockchain technology in the energy sector: a systematic review of challenges and opportunities
Andoni, M., Robu, V., Flynn, D., Abram, S., Geach, D., Jenkins, D., McCallum, P., & Peacock, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.10.014 · Cited by 2,426
Industry 4.0 and the current status as well as future prospects on logistics
Hofmann, E., & Rüsch, M. (2017) · Computers in Industry · doi:10.1016/j.compind.2017.04.002 · Cited by 1,841
Plastic waste in the marine environment: A review of sources, occurrence and effects
LI, W. C., TSE, H. F., & FOK, L. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.05.084 · Cited by 1,769
The Relevance of Circular Economy Practices to the Sustainable Development Goals
Schroeder, P., Anggraeni, K., & Weber, U. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12732 · Cited by 1,758
Towards Integration at Last? The Sustainable Development Goals as a Network of Targets
Le Blanc, D. (2015) · Sustainable Development · doi:10.1002/sd.1582 · Cited by 1,652
Industry 4.0 technologies assessment: A sustainability perspective
Bai, C., Dallasega, P., Orzes, G., & Sarkis, J. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107776 · Cited by 1,417
Circular economy—From review of theories and practices to development of implementation tools
Kalmykova, Y., Sadagopan, M., & Rosado, L. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.034 · Cited by 1,412
The emergence of circular economy: a new framing around prolonging resource productivity
Blomsma, F., & Brennan, G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12603 · Cited by 1,383
Business models and supply chains for the circular economy
Geissdoerfer, M., Morioka, S. N., de Carvalho, M. M., & Evans, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.159 · Cited by 1,335
Lopes de Sousa Jabbour, A. B., Jabbour, C. J. C., Godinho Filho, M., & Roubaud, D. (2018) · Annals of Operations Research · doi:10.1007/s10479-018-2772-8 · Cited by 1,116
A review of Internet of Things (IoT) embedded sustainable supply chain for industry 4.0 requirements
Manavalan, E., & Jayakrishna, K. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.11.030 · Cited by 1,054
Kagermann, H., & Wahlster, W. (2022) · Sci · doi:10.3390/sci4030026 · Cited by 992
Industrie 4.0: Hit or Hype? [Industry Forum]
Drath, R., & Horch, A. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2014.2312079 · Cited by 986
Nascimento, D. L. M., Alencastro, V., Quelhas, O. L. G., Caiado, R. G. G., Garza-Reyes, J. A., Rocha-Lona, L., & Tortorella, G. (2019) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-03-2018-0071 · Cited by 903
Measuring circular economy strategies through index methods: A critical analysis
Elia, V., Gnoni, M. G., & Tornese, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.196 · Cited by 892
Sustainable manufacturing in Industry 4.0: an emerging research agenda
Machado, C. G., Winroth, M. P., & Ribeiro da Silva, E. H. D. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1652777 · Cited by 829
The circular economy umbrella: Trends and gaps on integrating pathways
Homrich, A. S., Galvão, G., Abadia, L. G., & Carvalho, M. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.064 · Cited by 810
Theory Building through Conceptual Methods
Meredith, J. (1993) · International Journal of Operations & Production Management · doi:10.1108/01443579310028120 · Cited by 783
The private sector and the SDGs: the need to move beyond business as usual
Scheyvens, R., Banks, G., & Hughes, E. (2016) · Sustainable Development · doi:10.1002/sd.1623 · Cited by 740
Connecting climate action with other Sustainable Development Goals
Fuso Nerini, F., Sovacool, B., Hughes, N., Cozzi, L., Cosgrave, E., Howells, M., Tavoni, M., Tomei, J., Zerriffi, H., & Milligan, B. (2019) · Nature Sustainability · doi:10.1038/s41893-019-0334-y · Cited by 721
Ghisellini, P., Ripa, M., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.207 · Cited by 706
Software-Defined Industrial Internet of Things in the Context of Industry 4.0
Wan, J., Tang, S., Shu, Z., Li, D., Wang, S., Imran, M., & Vasilakos, A. (2016) · IEEE Sensors Journal · doi:10.1109/jsen.2016.2565621 · Cited by 691
Innovations for sustainable development: Moving toward a sustainable future
Silvestre, B. S., & Ţîrcă, D. M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.244 · Cited by 684
Bonilla, S. H., Silva, H. R. O., Terra da Silva, M., Franco Gonçalves, R., & Sacomano, J. B. (2018) · Sustainability · doi:10.3390/su10103740 · Cited by 645
Yadav, G., Luthra, S., Jakhar, S. K., Mangla, S. K., & Rai, D. P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120112 · Cited by 637
Hossain, M. U., Ng, S. T., Antwi-Afari, P., & Amor, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109948 · Cited by 614
Chen, T.-L., Kim, H., Pan, S.-Y., Tseng, P.-C., Lin, Y.-P., & Chiang, P.-C. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.136998 · Cited by 609
Assessing research trends related to Sustainable Development Goals: local and global issues
Salvia, A. L., Leal Filho, W., Brandli, L. L., & Griebeler, J. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.242 · Cited by 599
Conducting research literature reviews
Fink, A. (1998) · Medical Entomology and Zoology · Cited by 590
Jabbour, C. J. C., Jabbour, A. B. L. D. S., Sarkis, J., & Filho, M. G. (2019) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.09.010 · Cited by 576
Transforming our World: the 2030 Agenda for Sustainable DevelopmentPreprint
United Nations, U. N. (n.d.) · RePEc: Research Papers in Economics · Cited by 560
Stock, T., Obenaus, M., Kunz, S., & Kohl, H. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.06.026 · Cited by 512
Impact of Industry 4.0 on Environmental Sustainability
Oláh, J., Aburumman, N., Popp, J., Khan, M. A., Haddad, H., & Kitukutha, N. (2020) · Sustainability · doi:10.3390/su12114674 · Cited by 512
Comparing linear and circular supply chains: A case study from the construction industry
Nasir, M. H. A., Genovese, A., Acquaye, A. A., Koh, S. C. L., & Yamoah, F. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.06.008 · Cited by 503
The future of waste management in smart and sustainable cities: A review and concept paper
Esmaeilian, B., Wang, B., Lewis, K., Duarte, F., Ratti, C., & Behdad, S. (2018) · Waste Management · doi:10.1016/j.wasman.2018.09.047 · Cited by 495
Dev, N. K., Shankar, R., & Qaiser, F. H. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104583 · Cited by 489
Waste to wealth: the circular economy advantage
Vladimirova, D. (2017) · Production Planning & Control · doi:10.1080/09537287.2016.1249131 · Cited by 464
The circular economy, design thinking and education for sustainability
Andrews, D. (2015) · Local Economy: The Journal of the Local Economy Policy Unit · doi:10.1177/0269094215578226 · Cited by 437
Barriers to smart waste management for a circular economy in China
Zhang, A., Venkatesh, V. G., Liu, Y., Wan, M., Qu, T., & Huisingh, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118198 · Cited by 432
Cruz Sanchez, F. A., Boudaoud, H., Camargo, M., & Pearce, J. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121602 · Cited by 410
Luthra, S., Kumar, A., Zavadskas, E. K., Mangla, S. K., & Garza-Reyes, J. A. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1660828 · Cited by 376
Goyal, S., Esposito, M., & Kapoor, A. (2018) · Thunderbird International Business Review · doi:10.1002/tie.21883 · Cited by 358
Taking the Circularity to the Next Level: A Special Issue on the Circular Economy
Bocken, N. M. P., Olivetti, E. A., Cullen, J. M., Potting, J., & Lifset, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12606 · Cited by 350
Towards Sustainability? forest-based circular bioeconomy business models in finnish SMEs
D'Amato, D., Veijonaho, S., & Toppinen, A. (2020) · Forest Policy and Economics · doi:10.1016/j.forpol.2018.12.004 · Cited by 349
Challenges for the cyber-physical manufacturing enterprises of the future
Panetto, H., Iung, B., Ivanov, D., Weichhart, G., & Wang, X. (2019) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2019.02.002 · Cited by 332
Lacy, P., & Rutqvist, J. (2015) · doi:10.1057/9781137530707 · Cited by 327
The Operator 4.0: Towards socially sustainable factories of the future
Romero, D., Stahre, J., & Taisch, M. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106128 · Cited by 285
Big data for agri-food 4.0: Application to sustainability management for by-products supply chain
Belaud, J.-P., Prioux, N., Vialle, C., & Sablayrolles, C. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.06.006 · Cited by 273
Garcia-Muiña, F. E., González-Sánchez, R., Ferrari, A. M., & Settembre-Blundo, D. (2018) · Social Sciences · doi:10.3390/socsci7120255 · Cited by 268
Towards an Education for the Circular Economy (ECE): Five Teaching Principles and a Case Study
Kirchherr, J., & Piscicelli, L. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104406 · Cited by 265
Analysis of the relations between circular economy and sustainable development goals
Rodriguez-Anton, J. M., Rubio-Andrada, L., Celemín-Pedroche, M. S., & Alonso-Almeida, M. D. M. (2019) · International Journal of Sustainable Development & World Ecology · doi:10.1080/13504509.2019.1666754 · Cited by 260
Guerra-Rodríguez, S., Oulego, P., Rodríguez, E., Singh, D. N., & Rodríguez-Chueca, J. (2020) · Water · doi:10.3390/w12051431 · Cited by 243
Gravagnuolo, A., Angrisano, M., & Fusco Girard, L. (2019) · Sustainability · doi:10.3390/su11133512 · Cited by 234
Khan, I., & Kabir, Z. (2020) · Renewable Energy · doi:10.1016/j.renene.2019.12.132 · Cited by 233
The role of private sector in the implementation of sustainable development goals
Rashed, A. H., & Shah, A. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-020-00718-w · Cited by 229
Water quality and its interlinkages with the Sustainable Development Goals
Alcamo, J. (2019) · Current Opinion in Environmental Sustainability · doi:10.1016/j.cosust.2018.11.005 · Cited by 227
Kerdlap, P., Low, J. S. C., & Ramakrishna, S. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104438 · Cited by 226
Can circular bioeconomy be fueled by waste biorefineries — A closer look
Venkata Mohan, S., Dahiya, S., Amulya, K., Katakojwala, R., & Vanitha, T. K. (2019) · Bioresource Technology Reports · doi:10.1016/j.biteb.2019.100277 · Cited by 224
Circular Product Design. A Multiple Loops Life Cycle Design Approach for the Circular Economy
Mestre, A., & Cooper, T. (2017) · The Design Journal · doi:10.1080/14606925.2017.1352686 · Cited by 218
Circular economy practices within energy and waste management sectors of India: A meta-analysis
Priyadarshini, P., & Abhilash, P. C. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123018 · Cited by 215
Bressanelli, G., Adrodegari, F., Perona, M., & Saccani, N. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.322 · Cited by 214
Santika, W. G., Anisuzzaman, M., Bahri, P. A., Shafiullah, G. M., Rupf, G. V., & Urmee, T. (2019) · Energy Research & Social Science · doi:10.1016/j.erss.2018.11.016 · Cited by 207
Adopting the circular economy approach on food loss and waste: The case of Italian pasta production
Principato, L., Ruini, L., Guidi, M., & Secondi, L. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.01.025 · Cited by 206
Smart Waste Collection System Based on Location Intelligence
Gutierrez, J. M., Jensen, M., Henius, M., & Riaz, T. (2015) · Procedia Computer Science · doi:10.1016/j.procs.2015.09.170 · Cited by 199
More Sustainability in Industry through Industrial Internet of Things?
Beier, G., Niehoff, S., & Xue, B. (2018) · Applied Sciences · doi:10.3390/app8020219 · Cited by 195
Julián, I. P., & Guevara, S. (2018) · Futures · doi:10.1016/j.futures.2018.09.001 · Cited by 190
Waste to Wealth: The Circular Economy Advantage
Rutqvist, J., & Lacy, P. (2015) · Cited by 186
Sadhukhan, J., Dugmore, T. I. J., Matharu, A. S., Martínez-Hernández, E., Aburto, J., Rahman, P. K. S. M., & Lynch, J. M. (2020) · Sustainability · doi:10.3390/su12051976 · Cited by 177
Chiappetta Jabbour, C. J., De Camargo Fiorini, P., Wong, C. W. Y., Jugend, D., Lopes De Sousa Jabbour, A. B., Roman Pais Seles, B. M., Paula Pinheiro, M. A., & Ribeiro da Silva, H. M. (2020) · Resources Policy · doi:10.1016/j.resourpol.2020.101596 · Cited by 173
Arora, M., Raspall, F., Cheah, L., & Silva, A. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104581 · Cited by 172
Fuldauer, L. I., Ives, M. C., Adshead, D., Thacker, S., & Hall, J. W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.269 · Cited by 169
Pohlmann, C. R., Scavarda, A. J., Alves, M. B., & Korzenowski, A. L. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118798 · Cited by 166
Conceptualizing ReX for Aggregating End-of-life Strategies in Product Development
Sihvonen, S., & Ritola, T. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.01.026 · Cited by 161
Chhipi-Shrestha, G. K., Hewage, K., & Sadiq, R. (2015) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-014-0841-5 · Cited by 156
Ramakrishna, S., Ngowi, A. B., Jager, H. D., & Awuzie, B. O. (2020) · Science Technology and Society · doi:10.1177/0971721820912918 · Cited by 154
Filippini, R., Mazzocchi, C., & Corsi, S. (2019) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101506 · Cited by 152
Hidayatno, A., Destyanto, A. R., & Hulu, C. A. (2019) · Energy Procedia · doi:10.1016/j.egypro.2018.11.133 · Cited by 150
An Assessment Tool to Integrate Sustainability Principles into the Global Supply Chain
Torres, M. J. M., Izquierdo, M. Á. F., Rivera‐Lirio, J. M., Ferrero‐Ferrero, I., Escrig‐Olmedo, E., Gisbert-Navarro, J. V., & Marullo, M. C. (2018) · Sustainability · doi:10.3390/su10020535 · Cited by 146
An introduction to current food safety needs
Flynn, K., Pérez‐Villarreal, B., Barranco, A., Belc, N., Björnsdóttir, B., Fusco, V., Rainieri, S., Smáradóttir, S. E., Smeu, I., Teixeira, P., et al. (2018) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2018.09.012 · Cited by 136
Norwegian Waste-to-Energy: Climate change, circular economy and carbon capture and storage
Lausselet, C., Cherubini, F., Oreggioni, G. D., Serrano, G. D. A., Becidan, M., Hu, X., Rørstad, P. K., & Strømman, A. H. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.025 · Cited by 133
Zhang, Y., Xiong, R., He, H., & PECHT, M. G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.041 · Cited by 133
Geng, Y., Liu, Z., Xue, B., Dong, H., Fujita, T., & Chiu, A. S. F. (2014) · Environmental Science and Pollution Research · doi:10.1007/s11356-014-3287-8 · Cited by 131
Reuter, M. A. (2016) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-016-0735-5 · Cited by 130
Industry 4.0 to Accelerate the Circular Economy: A Case Study of Electric Scooter Sharing
Pham, T. T., Kuo, T., Tseng, M., Tan, R. R., Tan, K. H., Ika, D. S., & Lin, C. J. (2019) · Sustainability · doi:10.3390/su11236661 · Cited by 128
Role of social and solidarity economy in localizing the sustainable development goals
Lee, S. (2019) · International Journal of Sustainable Development & World Ecology · doi:10.1080/13504509.2019.1670274 · Cited by 120
Resource Recovery from Waste: Restoring the Balance between Resource Scarcity and Waste Overload
Velenturf, A. P. M., & Purnell, P. (2017) · Sustainability · doi:10.3390/su9091603 · Cited by 111
D’Amato, D., Gaio, M., & Semenzin, E. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135859 · Cited by 108
Velenturf, A. P. M., Purnell, P., Tregent, M., Ferguson, J., & Holmes, A. (2018) · Sustainability · doi:10.3390/su10051401 · Cited by 101
Fassio, F., & Tecco, N. (2019) · Systems · doi:10.3390/systems7030043 · Cited by 101
Linser, S., & Lier, M. (2020) · Sustainability · doi:10.3390/su12072898 · Cited by 92
A Mixed-reality Learning Environment
Quint, F., Sebastian, K., & Gorecky, D. (2015) · Procedia Computer Science · doi:10.1016/j.procs.2015.12.199 · Cited by 90
A systematic review of the sustainability assessment of bioenergy: The case of gaseous biofuels
Padilla‐Rivera, A., Paredes, M. G., & Güereca, L. P. (2019) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2019.03.014 · Cited by 75
Udugama, I. A., Petersen, L. A. H., Falco, F. C., Junicke, H., Mitic, A., Flores‐Alsina, X., Mansouri, S. S., & Gernaey, K. V. (2019) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2019.10.014 · Cited by 75
Modgil, S., Gupta, S., & Bhushan, B. (2020) · Production Planning & Control · doi:10.1080/09537287.2019.1695916 · Cited by 73
Hatzivasilis, G., Fysarakis, K., Soultatos, O., Askoxylakis, I. G., Papaefstathiou, I., & Demetriou, G. (2018) · Computer Communications · doi:10.1016/j.comcom.2018.02.007 · Cited by 71
de Souza, H. R. A., Dantas, T. E. T., Zanghelini, G. M., Cherubini, E., & Soares, S. R. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138111 · Cited by 60
Self-citationLiu, Z., Geng, Y., Ulgiati, S., Park, H., Fujita, T., & Wang, H. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.149 · Cited by 55
Türkeli, S., Huang, B., Stasik, A., & Kemp, R. (2019) · Energies · doi:10.3390/en12030498 · Cited by 54
Nutrient recycling: from waste to crop
Hidalgo, D., Corona, F., & Martín-Marroquín, J. M. (2020) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-019-00590-3 · Cited by 53
Implementation of spatial smart waste management system in malaysia
Omar, M. F., Termizi, A. A. A., Zainal, D., et al. (2016) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/37/1/012059 · Cited by 52
Operationalizing Industry 4.0: Understanding Barriers of Industry 4.0 and Circular Economy
Halse, L. L., & Jæger, B. (2019) · IFIP advances in information and communication technology · doi:10.1007/978-3-030-29996-5_16 · Cited by 39
Barros, M. V., Salvador, R., Piekarski, C. M., & de Francisco, A. C. (2018) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-018-1573-2 · Cited by 33
How healthy is a ‘healthy economy’? Incompatibility between current pathways towards SDG3 and SDG8
Meurs, M., Seidelmann, L., & Koutsoumpa, M. (2019) · Globalization and Health · doi:10.1186/s12992-019-0532-4 · Cited by 33
Sustainability-based Optimization Criteria for Industrial Symbiosis: The Symbioptima Case
Brondi, C., Cornago, S., Ballarino, A., Avai, A., Pietraroia, D., Dellepiane, U., & Niero, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.11.026 · Cited by 26
Circular economy: The way forward
Ghosh, S. K., & Agamuthu, P. (2018) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x18778444 · Cited by 24
Sustainable Development and Strategic Thinking
Stahel, W. R. (2007) · Chinese Journal of Population Resources and Environment · doi:10.1080/10042857.2007.10677526 · Cited by 17
Hatzivasilis, G., Christodoulakis, N., Tzagkarakis, C., Ioannidis, S., Demetriou, G., Fysarakis, K., & Panayiotou, M. (2019) · International Conference on Distributed Computing in Smart Systems and the Internet of Things (DCOSS-IoT) · doi:10.1109/dcoss.2019.00088 · Cited by 17
Abbasi, A., & Kamal, M. M. (2020) · Lecture notes in business information processing · doi:10.1007/978-3-030-44322-1_23 · Cited by 16
気候活動と他の持続可能な開発目標との結合【JST・京大機械翻訳】
(2019) · Nature Sustainability · Cited by 15
Opportunities for Socially Responsible Industry 4.s
Hahn, K. (2020) · IEEE Engineering Management Review · doi:10.1109/emr.2020.2969407 · Cited by 13
Cited by
Circular economy strategies for combating climate change and other environmental issues
Yang, M., Chen, L., Wang, J., Msigwa, G., Osman, A. I., Fawzy, S., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01499-6 · Cited by 835
Circular economy in the building and construction sector: a scientific evolution analysis
Norouzi, M., Chàfer, M., Cabeza, L. F., Jiménez, L., & Boer, D. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102704 · Cited by 482
Mishra, M., Desul, S., Santos, C. A. G., Mishra, S. K., Kamal, A. H. M., Goswami, S., Kalumba, A. M., Biswal, R., da Silva, R. M., dos Santos, C. A. C., et al. (2023) · Environment, Development and Sustainability · doi:10.1007/s10668-023-03225-w · Cited by 317
Nexus of circular economy and sustainable business performance in the era of digitalization
Agrawal, R., Wankhede, V. A., Kumar, A., Upadhyay, A., & Garza-Reyes, J. A. (2022) · International Journal of Productivity and Performance Management · doi:10.1108/ijppm-12-2020-0676 · Cited by 284
Circular Economy and Sustainability: the Past, the Present and the Future Directions
Nikolaou, I. E., Jones, N., & Stefanakis, A. (2021) · Circular Economy and Sustainability · doi:10.1007/s43615-021-00030-3 · Cited by 260
Metadata
- Authors
- Dantas, T. E. T., de-Souza, E. D., Destro, I. R., Hammes, G., Rodriguez, C. M. T., & Soares, S. R.
- Venue
- Sustainable Production and Consumption
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 26
- Pages
- 213-227
- ISSN
- 2352-5509 (ISSN-L)
- OpenAlex
- W3092575318
- Cited by
- 685
- References
- 122
- FWCI
- 84.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.