The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
Open accessAbstract
Extrusion-based 3D printers have been adopted in pursuit of engineering functional tissues through 3D bioprinting. However, we are still a long way from the promise of fabricating constructs approaching the complexity and function of native tissues. A major challenge is presented by the competing requirements of biomimicry and manufacturability. This opinion article discusses 3D printing in suspension baths as a novel strategy capable of disrupting the current bioprinting landscape. Suspension baths provide a semisolid medium to print into, voiding many of the inherent flaws of printing onto a flat surface in air. We review the state-of-the-art of this approach and extrapolate toward future possibilities that this technology might bring, including the fabrication of vascularized tissue constructs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Designer matrices for intestinal stem cell and organoid culture
Gjorevski, N., Sachs, N., Manfrin, A., Giger, S., Bragina, M. E., Ordóñez-Morán, P., Clevers, H., & Lutolf, M. P. (2016) · Nature · doi:10.1038/nature20168 · Cited by 1,426
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Vascularization is the key challenge in tissue engineering
Novosel, E. C., Kleinhans, C., & Kluger, P. J. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.004 · Cited by 1,062
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Self-citation3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Griffin, D. R., Weaver, W. M., Scumpia, P. O., Di Carlo, D., & Segura, T. (2015) · Nature Materials · doi:10.1038/nmat4294 · Cited by 981
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Advances in crosslinking strategies of biomedical hydrogels
Hu, W., Wang, Z., Xiao, Y., Zhang, S., & Wang, J. (2019) · Biomaterials Science · doi:10.1039/c8bm01246f · Cited by 896
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Jammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456
Self-citationRecent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
Nih, L. R., Sideris, E., Carmichael, S. T., & Segura, T. (2017) · Advanced Materials · doi:10.1002/adma.201606471 · Cited by 262
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Self-citation3D Bioprinting for Vascularized Tissue Fabrication
Richards, D., Jia, J., Yost, M., Markwald, R., & Mei, Y. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1653-z · Cited by 234
Effective bioprinting resolution in tissue model fabrication
Miri, A. K., Mirzaee, I., Hassan, S., Mesbah Oskui, S., Nieto, D., Khademhosseini, A., & Zhang, Y. S. (2019) · Lab on a Chip · doi:10.1039/c8lc01037d · Cited by 232
Jeon, O., Lee, Y. B., Jeong, H., Lee, S. J., Wells, D., & Alsberg, E. (2019) · Materials Horizons · doi:10.1039/c9mh00375d · Cited by 221
The Billion Cell Construct: Will Three-Dimensional Printing Get Us There?
Miller, J. S. (2014) · PLoS Biology · doi:10.1371/journal.pbio.1001882 · Cited by 199
Cryopreserved cell-laden alginate microgel bioink for 3D bioprinting of living tissues
Jeon, O., Lee, Y. B., Hinton, T. J., Feinberg, A. W., & Alsberg, E. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2018.11.009 · Cited by 183
Liquid-like Solids Support Cells in 3D
Bhattacharjee, T., Gil, C. J., Marshall, S. L., Urueña, J. M., O’Bryan, C. S., Carstens, M., Keselowsky, B., Palmer, G. D., Ghivizzani, S., Gibbs, C. P., et al. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00218 · Cited by 165
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
Suspended Manufacture of Biological Structures
Moxon, S. R., Cooke, M. E., Cox, S. C., Snow, M., Jeys, L. M., Jones, S. W., Smith, A. M., & Grover, L. M. (2017) · Advanced Materials · doi:10.1002/adma.201605594 · Cited by 133
Ding, H., & Chang, R. C. (2018) · Applied Sciences · doi:10.3390/app8030403 · Cited by 112
Quantitative characterization of 3D bioprinted structural elements under cell generated forces
Morley, C. D., Ellison, S. T., Bhattacharjee, T., O’Bryan, C. S., Zhang, Y., Smith, K. F., Kabb, C. P., Sebastian, M., Moore, G. L., Schulze, K. D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10919-1 · Cited by 107
Darling, N. J., Sideris, E., Hamada, N., Carmichael, S. T., & Segura, T. (2018) · Advanced Science · doi:10.1002/advs.201801046 · Cited by 90
Lim, K. S., Baptista, M., Moon, S., Woodfield, T. B. F., & Rnjak‐Kovacina, J. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.04.004 · Cited by 82
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Metadata
- Authors
- McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W.
- Venue
- Trends in Biotechnology
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 38
- Issue
- 6
- Pages
- 584-593
- ISSN
- 0167-7799 (ISSN-L)
- OpenAlex
- W2999836809
- Cited by
- 284
- References
- 36
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.