Development of life cycle water footprints for the production of fuels and chemicals from algae biomass
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
This study develops life cycle water footprints for the production of fuels and chemicals via thermochemical conversion of algae biomass. This study is based on two methods of feedstock production - ponds and photobioreactors (PBRs) - and four conversion pathways - fast pyrolysis, hydrothermal liquefaction (HTL), conventional gasification, and hydrothermal gasification (HTG). The results show the high fresh water requirement for algae production and the necessity to recycle harvested water or use alternative water sources. To produce 1 kg of algae through ponds, 1564 L of water are required. When PBRs are used, only 372 L water are required; however, the energy requirements for PBRs are about 30 times higher than for ponds. From a final product perspective, the pathway based on the gasification of algae biomass was the thermochemical conversion method that required the highest amount of water per MJ produced (mainly due to its low hydrogen yield), followed by fast pyrolysis and HTL. On the other hand, HTG has the lowest water footprint, mainly because the large amount of electricity generated as part of the process compensates for the electricity used by the system. Performance in all pathways can be improved through recycling channels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rodolfi, L., Chini Zittelli, G., Bassi, N., Padovani, G., Biondi, N., Bonini, G., & Tredici, M. R. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22033 · Cited by 2,879
Chen, C.-Y., Yeh, K.-L., Aisyah, R., Lee, D.-J., & Chang, J.-S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.159 · Cited by 1,860
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Photobioreactors for Mass Cultivation of Algae
Ugwu, C. U., Aoyagi, H., & Uchiyama, H. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.01.046 · Cited by 1,209
Slade, R., & Bauen, A. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.019 · Cited by 978
Life-cycle analysis on biodiesel production from microalgae: Water footprint and nutrients balance
Yang, J., Xu, M., Zhang, X., Hu, Q., Sommerfeld, M., & Chen, Y. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.07.017 · Cited by 883
Jorquera, O., Kiperstok, A., Sales, E. A., Embiruçu, M., & Ghirardi, M. L. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.09.038 · Cited by 863
Techno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814
The water footprint of bioenergy
Gerbens-Leenes, W., Hoekstra, A. Y., & van der Meer, T. H. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0812619106 · Cited by 774
Aquatic phototrophs: efficient alternatives to land-based crops for biofuels
Dismukes, G. C., Carrieri, D., Bennette, N., Ananyev, G. M., & Posewitz, M. C. (2008) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2008.05.007 · Cited by 733
Development of Suitable Photobioreactor for Algae Production—A Review
Singh, R. N., & Sharma, S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.026 · Cited by 605
Patel, M., Zhang, X., & Kumar, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.070 · Cited by 535
Self-citationA review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
Self-citationMicroalgal mass culture systems and methods: their limitation and potential
Lee, Y.-K. (2001) · Journal of Applied Phycology · doi:10.1023/a:1017560006941 · Cited by 528
Li, X., Xu, H., & Wu, Q. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21489 · Cited by 525
Large-Scale Pyrolysis Oil Production: A Technology Assessment and Economic Analysis
Ringer, M., Putsche, V., & Scahill, J. (2006) · doi:10.2172/894989 · Cited by 370
Ozkan, A., Kinney, K., Katz, L., & Berberoglu, H. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.055 · Cited by 349
NREL (National Renewable Energy Laboratory (NREL), G., Davis, R., USDOE Office of Energy Efficiency and Renewable Energy (EERE), B. T. O. (.-3., Markham, J., Kinchin, C., Grundl, N., Tan, E., & Humbird, D. (2016) · doi:10.2172/1239893 · Cited by 324 · cited 2×
“195 For our study, we assumed a large-scale facility capable of producing 2,000 T of dry 196 algae/day, with the same basic characteristics of operation and production described in a recent 197 study (Davis et al. 2016).”
BackgroundMethodJones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S. (2009) · doi:10.2172/949907 · Cited by 320 · cited 2×
“Once prepared, the dried biomass is sent 262 to a fluidized bed pyrolysis reactor at 520 °C (Jones et al. 2009) with particles smaller than 2mm. 263 Following reaction, bio-char is removed by cyclones, resulting in a bio-oil yield of 264 approximately 59.9 wt% (dry basis) depending on the feedstock…”
BackgroundMethodInfluentialResource demand implications for us algae biofuels production scale-up
Pate, R., Klise, G., & Wu, B. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.04.023 · Cited by 315
Pacific Northwest National Lab. (PNNL), R., Jones, S., USDOE, Zhu, Y., Anderson, D., Hallen, R., Elliott, D., Schmidt, A., Albrecht, K., Hart, T., et al. (2014) · doi:10.2172/1126336 · Cited by 300
Spath, P., Aden, A., Eggeman, T., Ringer, M., Wallace, B., & Jechura, J. (2005) · doi:10.2172/15016221 · Cited by 299
Patel, M., & Kumar, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.146 · Cited by 284
Self-citationLife cycle assessment of gasoline and diesel produced via fast pyrolysis and hydroprocessing
Hsu, D. D. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.05.019 · Cited by 179
Cited by
Life cycle assessment and techno-economic analysis of sustainable bioenergy production: a review
Osman, A. I., Fang, B., Zhang, Y., Liu, Y., Yu, J., Farghali, M., Rashwan, A. K., Chen, Z., Chen, L., Ihara, I., et al. (2024) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01694-z · Cited by 236
Zhu, Y., Liang, J., Yang, Q., Zhou, H., & Peng, K. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109396 · Cited by 61
Kothari, R., Ahmad, S., Pathak, V. V., Pandey, A., Kumar, A., Shankarayan, R., Black, P. N., & Tyagi, V. V. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-019-00533-y · Cited by 52
Self-citationMinhas, A. K., Gaur, S., & Adholeya, A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e12801 · Cited by 31
“The content of chlorophyll is directly related with the concentration of algal cells [44].”
Background
Metadata
- Authors
- Nogueira Junior, E., Kumar, M., Pankratz, S., Oyedun, A. O., & Kumar, A.
- Venue
- Water Research
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 140
- Pages
- 311-322
- ISSN
- 0043-1354 (ISSN-L)
- OpenAlex
- W2801641625
- Cited by
- 51
- References
- 24
- FWCI
- 3.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.