The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Differences in the Electrochemical Performance of Pt-Based Catalysts Used for Polymer Electrolyte Membrane Fuel Cells in Liquid Half- and Full-Cells
Abstract
A substantial amount of research effort has been directed toward the development of Pt-based catalysts with higher performance and durability than conventional polycrystalline Pt nanoparticles to achieve high-power and innovative energy conversion systems. Currently, attention has been paid toward expanding the electrochemically active surface area (ECSA) of catalysts and increase their intrinsic activity in the oxygen reduction reaction (ORR). However, despite innumerable efforts having been carried out to explore this possibility, most of these achievements have focused on the rotating disk electrode (RDE) in half-cells, and relatively few results have been adaptable to membrane electrode assemblies (MEAs) in full-cells, which is the actual operating condition of fuel cells. Thus, it is uncertain whether these advanced catalysts can be used as a substitute in practical fuel cell applications, and an improvement in the catalytic performance in real-life fuel cells is still necessary. Therefore, from a more practical and industrial point of view, the goal of this review is to compare the ORR catalyst performance and durability in half- and full-cells, providing a differentiated approach to the durability concerns in half- and full-cells, and share new perspectives for strategic designs used to induce additional performance in full-cell devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Combining theory and experiment in electrocatalysis: Insights into materials design
Seh, Z. W., Kibsgaard, J., Dickens, C. F., Chorkendorff, I., Nørskov, J. K., & Jaramillo, T. F. (2017) · Science · doi:10.1126/science.aad4998 · Cited by 12,114
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Improved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
Alloys of platinum and early transition metals as oxygen reduction electrocatalysts
Greeley, J., Stephens, I. E. L., Bondarenko, A. S., Johansson, T. P., Hansen, H. A., Jaramillo, T. F., Rossmeisl, J., Chorkendorff, I., & Nørskov, J. K. (2009) · Nature Chemistry · doi:10.1038/nchem.367 · Cited by 3,203
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Wang, D., Xin, H. L., Hovden, R., Wang, H., Yu, Y., Muller, D. A., DiSalvo, F. J., & Abruña, H. D. (2013) · Nature Materials · doi:10.1038/nmat3458 · Cited by 2,082
Stabilization of Platinum Oxygen-Reduction Electrocatalysts Using Gold Clusters
Zhang, J., Sasaki, K., Sutter, E., & Adzic, R. R. (2007) · Science · doi:10.1126/science.1134569 · Cited by 1,779
Ultrafine jagged platinum nanowires enable ultrahigh mass activity for the oxygen reduction reaction
Li, M., Zhao, Z., Cheng, T., Fortunelli, A., Chen, C.-Y., Yu, R., Zhang, Q., Gu, L., Merinov, B. V., Lin, Z., et al. (2016) · Science · doi:10.1126/science.aaf9050 · Cited by 1,605
New roads and challenges for fuel cells in heavy-duty transportation
Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., Weber, A. Z., Myers, D. J., & Kusoglu, A. (2021) · Nature Energy · doi:10.1038/s41560-021-00775-z · Cited by 1,277
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Ultralow-loading platinum-cobalt fuel cell catalysts derived from imidazolate frameworks
Chong, L., Wen, J., Kubal, J., Sen, F. G., Zou, J., Greeley, J., Chan, M., Barkholtz, H., Ding, W., & Liu, D.-J. (2018) · Science · doi:10.1126/science.aau0630 · Cited by 1,100
Shao, M., Peles, A., & Shoemaker, K. (2011) · Nano Letters · doi:10.1021/nl2017459 · Cited by 878
Noncarbon Support Materials for Polymer Electrolyte Membrane Fuel Cell Electrocatalysts
Wang, Y.-J., Wilkinson, D. P., & Zhang, J. (2011) · Chemical Reviews · doi:10.1021/cr100060r · Cited by 801
Synthesis and Oxygen Reduction Activity of Shape-Controlled Pt3Ni Nanopolyhedra
Zhang, J., Yang, H., Fang, J., & Zou, S. (2010) · Nano Letters · doi:10.1021/nl903717z · Cited by 788
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Markovic, N. M., Gasteiger, H. A., & Ross, P. N. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100011a001 · Cited by 736
Wang, J. X., Inada, H., Wu, L., Zhu, Y., Choi, Y., Liu, P., Zhou, W.-P., & Adzic, R. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9067645 · Cited by 719
Boosting Fuel Cell Performance with Accessible Carbon Mesopores
Yarlagadda, V., Carpenter, M. K., Moylan, T. E., Kukreja, R. S., Koestner, R., Gu, W., Thompson, L., & Kongkanand, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00186 · Cited by 686
Highly Durable and Active PtFe Nanocatalyst for Electrochemical Oxygen Reduction Reaction
Chung, D. Y., Jun, S. W., Yoon, G., Kwon, S. G., Shin, D. Y., Seo, P., Yoo, J. M., Shin, H., Chung, Y.-H., Kim, H., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09653 · Cited by 677
Self-citationCore‐Protected Platinum Monolayer Shell High‐Stability Electrocatalysts for Fuel‐Cell Cathodes
Sasaki, K., Naohara, H., Cai, Y., Choi, Y. M., Liu, P., Vukmirovic, M. B., Wang, J. X., & Adzic, R. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201004287 · Cited by 596
Markovic, N., Gasteiger, H., & Ross, P. N. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837646 · Cited by 564
Tuning the Activity of Pt(111) for Oxygen Electroreduction by Subsurface Alloying
Stephens, I. E. L., Bondarenko, A. S., Perez-Alonso, F. J., Calle-Vallejo, F., Bech, L., Johansson, T. P., Jepsen, A. K., Frydendal, R., Knudsen, B. P., Rossmeisl, J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja111690g · Cited by 526
A review of accelerated stress tests of MEA durability in PEM fuel cells
ZHANG, S., YUAN, X., WANG, H., MERIDA, W., ZHU, H., SHEN, J., WU, S., & ZHANG, J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.10.012 · Cited by 525
Xia, B. Y., Wu, H. B., Yan, Y., Lou, X. W. (., & Wang, X. (2013) · Journal of the American Chemical Society · doi:10.1021/ja402955t · Cited by 464
New Approach to Fully Ordered fct-FePt Nanoparticles for Much Enhanced Electrocatalysis in Acid
Li, Q., Wu, L., Wu, G., Su, D., Lv, H., Zhang, S., Zhu, W., Casimir, A., Zhu, H., Mendoza-Garcia, A., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00320 · Cited by 460
Mukerjee, S., Srinivasan, S., Soriaga, M. P., & McBreen, J. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100013a032 · Cited by 439
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Gao, L., Li, X., Yao, Z., Bai, H., Lu, Y., Ma, C., Lu, S., Peng, Z., Yang, J., Pan, A., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b07238 · Cited by 376
Ultrathin Icosahedral Pt-Enriched Nanocage with Excellent Oxygen Reduction Reaction Activity
He, D. S., He, D., Wang, J., Lin, Y., Yin, P., Hong, X., Wu, Y., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12530 · Cited by 343
Pt-based nanoarchitecture and catalyst design for fuel cell applications
Jung, N., Chung, D. Y., Ryu, J., Yoo, S. J., & Sung, Y.-E. (2014) · Nano Today · doi:10.1016/j.nantod.2014.06.006 · Cited by 324
Self-citationHuang, H., Li, K., Chen, Z., Luo, L., Gu, Y., Zhang, D., Ma, C., Si, R., Yang, J., Peng, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01036 · Cited by 312
The Key to High Performance Low Pt Loaded Electrodes
Orfanidi, A., Madkikar, P., El-Sayed, H. A., Harzer, G. S., Kratky, T., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1621704jes · Cited by 276
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components
Yan, Q., Toghiani, H., Lee, Y.-W., Liang, K., & Causey, H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.075 · Cited by 263
Kodama, K., Motobayashi, K., Shinohara, A., Hasegawa, N., Kudo, K., Jinnouchi, R., Osawa, M., & Morimoto, Y. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03571 · Cited by 258
Morphological features (defects) in fuel cell membrane electrode assemblies
Kundu, S., Fowler, M. W., Simon, L. C., & Grot, S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.027 · Cited by 244
Li, D., Wang, C., Strmcnik, D. S., Tripkovic, D. V., Sun, X., Kang, Y., Chi, M., Snyder, J. D., van der Vliet, D., Tsai, Y., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01564a · Cited by 238
Kibsgaard, J., Gorlin, Y., Chen, Z., & Jaramillo, T. F. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2120162 · Cited by 213
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Tailoring Catalyst Morphology towards High Performance for Low Pt Loaded PEMFC Cathodes
Harzer, G. S., Orfanidi, A., El-Sayed, H., Madkikar, P., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311810jes · Cited by 146
Millington, B., Whipple, V., & Pollet, B. G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.024 · Cited by 141
A comparative study of CCM and hot-pressed MEAs for PEM fuel cells
Tang, H., Wang, S., Jiang, S. P., & Pan, M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.062 · Cited by 125
Yang, F., Xin, L., Uzunoglu, A., Qiu, Y., Stanciu, L., Ilavsky, J., Li, W., & Xie, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12949 · Cited by 124
Uchida, M., Park, Y.-C., Kakinuma, K., Yano, H., Tryk, D. A., Kamino, T., Uchida, H., & Watanabe, M. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51801a · Cited by 122
Jeon, S., Lee, J., Rios, G. M., Kim, H.-J., Lee, S.-Y., Cho, E., Lim, T.-H., & Hyun Jang, J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.044 · Cited by 113
Ultralow platinum loading proton exchange membrane fuel cells: Performance losses and solutions
Banham, D., Zou, J., Mukerjee, S., Liu, Z., Yang, D., Zhang, Y., Peng, Y., & Dong, A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229515 · Cited by 103
Nano-scale control of the ionomer distribution by molecular masking of the Pt surface in PEMFCs
Doo, G., Yuk, S., Lee, J. H., Choi, S., Lee, D.-H., Lee, D. W., Hyun, J., Kwon, S. H., Lee, S. G., & Kim, H.-T. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta14002f · Cited by 99
Jha, N., Ramesh, P., Bekyarova, E., Tian, X., Wang, F., Itkis, M. E., & Haddon, R. C. (2013) · Scientific Reports · doi:10.1038/srep02257 · Cited by 97
Li, T., Shen, J., Chen, G., Guo, S., & Xie, G. (2020) · ACS Omega · doi:10.1021/acsomega.0c02110 · Cited by 81
Cycle durability of metal oxide supports for PEFC electrocatalysts
Takabatake, Y., Noda, Z., Lyth, S. M., Hayashi, A., & Sasaki, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.01.094 · Cited by 80
Ahn, C.-Y., Jang, S., Cho, Y.-H., Choi, J., Kim, S., Kim, S. M., Sung, Y.-E., & Choi, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-19861-6 · Cited by 80
Self-citationFirst principles computational study on the electrochemical stability of Pt–Co nanocatalysts
Noh, S. H., Seo, M. H., Seo, J. K., Fischer, P., & Han, B. (2013) · Nanoscale · doi:10.1039/c3nr02611f · Cited by 78
Fuel cell catalyst layers containing short-side-chain perfluorosulfonic acid ionomers
Peron, J., Edwards, D., Haldane, M., Luo, X., Zhang, Y., Holdcroft, S., & Shi, Z. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.050 · Cited by 77
Suzuki, T., Tanaka, H., Hayase, M., Tsushima, S., & Hirai, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.078 · Cited by 72
Ahn, C.-Y., Cheon, J.-Y., Joo, S.-H., & Kim, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.012 · Cited by 58
Self-citationAizawa, M., Gyoten, H., Salah, A., & Liu, X. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3502613 · Cited by 52
Okaya, K., Yano, H., Kakinuma, K., Watanabe, M., & Uchida, H. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302224n · Cited by 36
Kim, O. ‐., Oh, S. ‐., Ahn, C. ‐., Kim, S., Kim, J. K., Kim, J., Yang, S., Choi, M., Cho, Y. ‐., & Sung, Y. ‐. (2018) · Fuel Cells · doi:10.1002/fuce.201800083 · Cited by 31
Self-citationSelvaganesh, S. V., Sridhar, P., Pitchumani, S., & Shukla, A. K. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.051301jes · Cited by 28
Choi, S.-H., Jung, D.-W., Yoon, S.-O., Park, S., Oh, E.-S., & Kim, J. (2011) · Metals and Materials International · doi:10.1007/s12540-011-1019-x · Cited by 10
Self-citation
Cited by
Covalent organic framework–based porous ionomers for high-performance fuel cells
Zhang, Q., Dong, S., Shao, P., Zhu, Y., Mu, Z., Sheng, D., Zhang, T., Jiang, X., Shao, R., Ren, Z., et al. (2022) · Science · doi:10.1126/science.abm6304 · Cited by 505
Wan, L., Xu, Z., Xu, Q., Pang, M., Lin, D., Liu, J., & Wang, B. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00142c · Cited by 371
(2023) · doi:10.1038/s41929-023-00949-w · Cited by 195
Su, H., Gao, W., Li, L., Yuan, H., & Wen, D. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c02126 · Cited by 50
Zhang, L., Tong, L., Li, S., Ma, C.-S., Xue, K.-Z., & Liang, H.-W. (2025) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2024.09.028 · Cited by 27
Metadata
- Authors
- Ahn, C.-Y., Park, J. E., Kim, S., Kim, O.-H., Hwang, W., Her, M., Kang, S. Y., Park, S., Kwon, O. J., Park, H. S., Cho, Y.-H., & Sung, Y.-E.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-10-22
- Volume
- 121
- Issue
- 24
- Pages
- 15075-15140
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3207472701
- Cited by
- 239
- References
- 63
- FWCI
- 2.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.