The DOI matches its Crossref record; 274 of the 274 references it cites were found in a registry or an index.
Porous Flow Field for Next-Generation Proton Exchange Membrane Fuel Cells: Materials, Characterization, Design, and Challenges
Abstract
Porous flow fields distribute fuel and oxygen for the electrochemical reactions of proton exchange membrane (PEM) fuel cells through their pore network instead of conventional flow channels. This type of flow fields has showed great promises in enhancing reactant supply, heat removal, and electrical conduction, reducing the concentration performance loss and improving operational stability for fuel cells. This review presents the research and development progress of porous flow fields with insights for next-generation PEM fuel cells of high power density (e.g., ∼9.0 kW L –1 ). Materials, fabrication methods, fundamentals, and fuel cell performance associated with porous flow fields are discussed in depth. Major challenges are described and explained, along with several future directions, including separated gas/liquid flow configurations, integrated porous structure, full morphology modeling, data-driven methods, and artificial intelligence-assisted design/optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Volume of fluid (VOF) method for the dynamics of free boundaries
Hirt, C. W., & Nichols, B. D. (1981) · Journal of Computational Physics · doi:10.1016/0021-9991(81)90145-5 · Cited by 16,105
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Self-citationDesigning the next generation of proton-exchange membrane fuel cells
Jiao, K., Xuan, J., Du, Q., Bao, Z., Xie, B., Wang, B., Zhao, Y., Fan, L., Wang, H., Hou, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-03482-7 · Cited by 2,947
Self-citationBatteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Brakke, K. A. (1992) · Experimental Mathematics · doi:10.1080/10586458.1992.10504253 · Cited by 2,340
Capillary Behavior in Porous Solids
Leverett, M. C. (1941) · Transactions of the AIME · doi:10.2118/941152-g · Cited by 2,248
Hidden fluid mechanics: Learning velocity and pressure fields from flow visualizations
Raissi, M., Yazdani, A., & Karniadakis, G. E. (2020) · Science · doi:10.1126/science.aaw4741 · Cited by 2,103
Materials, technological status, and fundamentals of PEM fuel cells – A review
Wang, Y., Ruiz Diaz, D. F., Chen, K. S., Wang, Z., & Adroher, X. C. (2020) · Materials Today · doi:10.1016/j.mattod.2019.06.005 · Cited by 1,419
Self-citationNew roads and challenges for fuel cells in heavy-duty transportation
Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., Weber, A. Z., Myers, D. J., & Kusoglu, A. (2021) · Nature Energy · doi:10.1038/s41560-021-00775-z · Cited by 1,277
Fundamental Models for Fuel Cell Engineering
Wang, C.-Y. (2004) · Chemical Reviews · doi:10.1021/cr020718s · Cited by 1,266
Thermophysical properties of high porosity metal foams
Bhattacharya, A., Calmidi, V. V., & Mahajan, R. L. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00220-4 · Cited by 1,233
Forced Convection in High Porosity Metal Foams
Calmidi, V. V., & Mahajan, R. L. (2000) · Journal of Heat Transfer · doi:10.1115/1.1287793 · Cited by 1,166
Nardecchia, S., Carriazo, D., Ferrer, M. L., Gutiérrez, M. C., & del Monte, F. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35353a · Cited by 1,153
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Self-citationA review of water flooding issues in the proton exchange membrane fuel cell
Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., Zhang, J., Fatih, K., Zhang, J., Wang, H., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.068 · Cited by 1,026
Self-citationReview of bipolar plates in PEM fuel cells: Flow-field designs
Li, X., & Sabir, I. (2004) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2004.09.019 · Cited by 994
Nam, J. H., & Kaviany, M. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00305-3 · Cited by 988
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
Boomsma, K., & Poulikakos, D. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00123-x · Cited by 831
PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review
Wang, Y., Pang, Y., Xu, H., Martinez, A., & Chen, K. S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00790h · Cited by 828
Self-citationTwo-phase flow and transport in the air cathode of proton exchange membrane fuel cells
Wang, Z. H., Wang, C. Y., & Chen, K. S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00662-5 · Cited by 810
Three-dimensional graphene architectures
Li, C., & Shi, G. (2012) · Nanoscale · doi:10.1039/c2nr31467c · Cited by 805
Tao, F., & Qi, Q. (2019) · Nature · doi:10.1038/d41586-019-02849-1 · Cited by 799
Metal foams as compact high performance heat exchangers
Boomsma, K., Poulikakos, D., & Zwick, F. (2003) · Mechanics of Materials · doi:10.1016/j.mechmat.2003.02.001 · Cited by 744
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Metal bipolar plates for PEM fuel cell—A review
Tawfik, H., Hung, Y., & Mahajan, D. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.088 · Cited by 723
Toyota MIRAI Fuel Cell Vehicle and Progress Toward a Future Hydrogen Society
Yoshida, T., & Kojima, K. (2015) · Interface magazine · doi:10.1149/2.f03152if · Cited by 690
The Effective Thermal Conductivity of High Porosity Fibrous Metal Foams
Calmidi, V. V., & Mahajan, R. L. (1999) · Journal of Heat Transfer · doi:10.1115/1.2826001 · Cited by 639
Physics-informed learning of governing equations from scarce data
Chen, Z., Liu, Y., & Sun, H. (2021) · Nature Communications · doi:10.1038/s41467-021-26434-1 · Cited by 609
A counter-example to Kelvin's conjecture on minimal surfaces
Weaire, D., & Phelan, R. (1994) · Philosophical Magazine Letters · doi:10.1080/09500839408241577 · Cited by 587
Wu, Y., Yi, N., Huang, L., Zhang, T., Fang, S., Chang, H., Li, N., Oh, J., Lee, J. A., Kozlov, M., et al. (2015) · Nature Communications · doi:10.1038/ncomms7141 · Cited by 546
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Review—Electromobility: Batteries or Fuel Cells?
Gröger, O., Gasteiger, H. A., & Suchsland, J.-P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211514jes · Cited by 529
Corrosion of metal bipolar plates for PEM fuel cells: A review
Antunes, R. A., Oliveira, M. C. L., Ett, G., & Ett, V. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.01.059 · Cited by 511
Artificial Intelligence Applied to Battery Research: Hype or Reality?
Lombardo, T., Duquesnoy, M., El-Bouysidy, H., Årén, F., Gallo-Bueno, A., Jørgensen, P. B., Bhowmik, A., Demortière, A., Ayerbe, E., Alcaide, F., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00108 · Cited by 503
Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review
Manso, A. P., Marzo, F. F., Barranco, J., Garikano, X., & Garmendia Mujika, M. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.07.076 · Cited by 487
Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology
Wang, Y., Seo, B., Wang, B., Zamel, N., Jiao, K., & Adroher, X. C. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100014 · Cited by 484
Self-citationA critical review of cooling techniques in proton exchange membrane fuel cell stacks
Zhang, G., & Kandlikar, S. G. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.11.010 · Cited by 483
Self-citationLiquid Water Removal from a Polymer Electrolyte Fuel Cell
Zhang, F. Y., Yang, X. G., & Wang, C. Y. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2138675 · Cited by 471
A review of recent development: Transport and performance modeling of PEM fuel cells
Wu, H.-W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.075 · Cited by 444
Probing the critical nucleus size for ice formation with graphene oxide nanosheets
Bai, G., Gao, D., Liu, Z., Zhou, X., & Wang, J. (2019) · Nature · doi:10.1038/s41586-019-1827-6 · Cited by 442
Zhao, J., Tu, Z., & Chan, S. H. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229434 · Cited by 442
Nanocrack-regulated self-humidifying membranes
Park, C. H., Lee, S. Y., Hwang, D. S., Shin, D. W., Cho, D. H., Lee, K. H., Kim, T.-W., Kim, T.-W., Lee, M., Kim, D.-S., et al. (2016) · Nature · doi:10.1038/nature17634 · Cited by 440
A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell
Berning, T., & Djilali, N. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1621412 · Cited by 409
Additive manufacturing for energy: A review
Sun, C., Wang, Y., McMurtrey, M. D., Jerred, N. D., Liou, F., & Li, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116041 · Cited by 405
Self-citationPore-scale modeling of complex transport phenomena in porous media
Chen, L., He, A., Zhao, J., Kang, Q., Li, Z.-Y., Carmeliet, J., Shikazono, N., & Tao, W.-Q. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100968 · Cited by 399
Self-citationLi, X. (2005) · CRC Press eBooks · doi:10.1201/9780203942338 · Cited by 387
Ozden, A., Shahgaldi, S., Li, X., & Hamdullahpur, F. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.05.002 · Cited by 385
The Role of Platinum in Proton Exchange Membrane Fuel Cells
Holton, O. T., & Stevenson, J. W. (2013) · Platinum Metals Review · doi:10.1595/147106713x671222 · Cited by 353
Cold start of proton exchange membrane fuel cell
Luo, Y., & Jiao, K. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.10.003 · Cited by 353
Self-citationCoating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review
Asri, N. F., Husaini, T., Sulong, A. B., Majlan, E. H., & Daud, W. R. W. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.06.241 · Cited by 345
Multi-phase models for water and thermal management of proton exchange membrane fuel cell: A review
Zhang, G., & Jiao, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.071 · Cited by 345
Self-citationCarbon Corrosion in PEM Fuel Cells and the Development of Accelerated Stress Tests
Macauley, N., Papadias, D. D., Fairweather, J., Spernjak, D., Langlois, D., Ahluwalia, R., More, K. L., Mukundan, R., & Borup, R. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0061806jes · Cited by 341
On the division of space with minimum partitional area
Thomson, W. (1887) · Acta Mathematica · doi:10.1007/bf02418046 · Cited by 312
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
A 3D model of PEMFC considering detailed multiphase flow and anisotropic transport properties
Zhang, G., Fan, L., Sun, J., & Jiao, K. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.102 · Cited by 298
Self-citationChen, Q., Zhang, G., Zhang, X., Sun, C., Jiao, K., & Wang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116496 · Cited by 298
Self-citationFand, R. M., Kim, B. Y. K., Lam, A. C. C., & Phan, R. T. (1987) · Journal of Fluids Engineering · doi:10.1115/1.3242658 · Cited by 296
Development of Compact and High-Performance Fuel Cell Stack
Konno, N., Mizuno, S., Nakaji, H., & Ishikawa, Y. (2015) · SAE International Journal of Alternative Powertrains · doi:10.4271/2015-01-1175 · Cited by 291
Jiao, K., & Li, X. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.06.072 · Cited by 289
Self-citationRigorous 3-D Mathematical Modeling of PEM Fuel Cells
Mazumder, S., & Cole, J. V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1615609 · Cited by 286
Lin, Z., Liu, J., Peng, W., Zhu, Y., Zhao, Y., Jiang, K., Peng, M., & Tan, Y. (2020) · ACS Nano · doi:10.1021/acsnano.9b08832 · Cited by 280
3D Graphene‐Based Macrostructures for Water Treatment
Wang, H., Mi, X., Li, Y., & Zhan, S. (2020) · Advanced Materials · doi:10.1002/adma.201806843 · Cited by 279
Wilberforce, T., El Hassan, Z., Ogungbemi, E., Ijaodola, O., Khatib, F. N., Durrant, A., Thompson, J., Baroutaji, A., & Olabi, A. G. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.081 · Cited by 279
A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells
Anderson, R., Zhang, L., Ding, Y., Blanco, M., Bi, X., & Wilkinson, D. P. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.123 · Cited by 276
Theory and practice of flow field designs for fuel cell scaling-up: A critical review
Wang, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.032 · Cited by 270
Dynamics of water droplets detached from porous surfaces of relevance to PEM fuel cells
Theodorakakos, A., Ous, T., Gavaises, M., Nouri, J. M., Nikolopoulos, N., & Yanagihara, H. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.04.021 · Cited by 263
Porous metal materials for polymer electrolyte membrane fuel cells – A review
Yuan, W., Tang, Y., Yang, X., & Wan, Z. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.01.073 · Cited by 261
Perng, S.-W., & Wu, H.-W. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.059 · Cited by 242
Chen, K., Chen, L., Chen, Y., Bai, H., & Li, L. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34816k · Cited by 240
Zhang, G., & Jiao, K. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.031 · Cited by 240
Self-citationDudukovic, N. A., Fong, E. J., Gemeda, H. B., DeOtte, J. R., Cerón, M. R., Moran, B. D., Davis, J. T., Baker, S. E., & Duoss, E. B. (2021) · Nature · doi:10.1038/s41586-021-03603-2 · Cited by 238
Humidification strategy for polymer electrolyte membrane fuel cells – A review
Chang, Y., Qin, Y., Yin, Y. S., Zhang, J., & Li, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.125 · Cited by 233
Modeling two-phase flow in PEM fuel cell channels
Wang, Y., Basu, S., & Wang, C.-Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.047 · Cited by 230
Self-citationYin, Y. S., Wang, X., Shangguan, X., Zhang, J., & Qin, Y. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.03.037 · Cited by 229
Self-citationPerformance investigation on a novel 3D wave flow channel design for PEMFC
Chen, X., Yu, Z., Yang, C., Chen, Y., Jin, C., Ding, Y., Li, W., & Wan, Z. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.06.057 · Cited by 226
Gu, S., Lu, T. J., & Evans, A. G. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00234-9 · Cited by 222
Mishra, V., Yang, F., & Pitchumani, R. (2004) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.1782917 · Cited by 218
Recent advances on 3D printing graphene-based composites
Guo, H., Lv, R., & Bai, S. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.03.003 · Cited by 218
Zamel, N., & Li, X. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.07.002 · Cited by 217
Wang, B., Xie, B., Xuan, J., & Jiao, K. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112460 · Cited by 215
Self-citationKopanidis, A., Theodorakakos, A., Gavaises, E., & Bouris, D. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.12.067 · Cited by 214
Three-Dimensional Printed Graphene Foams
Sha, J., Li, Y., Villegas Salvatierra, R., Wang, T., Dong, P., Ji, Y., Lee, S.-K., Zhang, C., Zhang, J., Smith, R. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01987 · Cited by 214
Effects of operation temperature and reactant gas humidity levels on performance of PEM fuel cells
Özen, D. N., Timurkutluk, B., & Altınışık, K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.040 · Cited by 213
Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field
Zhang, G., Xie, B., Bao, Z., Niu, Z., & Jiao, K. (2018) · International Journal of Energy Research · doi:10.1002/er.4215 · Cited by 213
Self-citationContact resistance prediction and structure optimization of bipolar plates
Zhou, P., Wu, C., & Ma, G. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.080 · Cited by 211
Borlaug, B., Muratori, M., Gilleran, M., Woody, D., Muston, W., Canada, T., Ingram, A., Gresham, H., & McQueen, C. (2021) · Nature Energy · doi:10.1038/s41560-021-00855-0 · Cited by 211
Transverse permeability of fibrous porous media
Tamayol, A., & Bahrami, M. (2011) · Physical Review E · doi:10.1103/physreve.83.046314 · Cited by 210
Development of the fuel cell vehicle mirai
Nonobe, Y. (2016) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.22328 · Cited by 209
Channel to rib width ratio influence with various flow field designs on performance of PEM fuel cell
Kerkoub, Y., Benzaoui, A., Haddad, F., & Ziari, Y. K. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.08.041 · Cited by 209
Qiu, D., Peng, L., Lai, X., Ni, M., & Lehnert, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109289 · Cited by 208
Machine learning for advanced energy materials
Liu, Y., Esan, O. C., Pan, Z., & An, L. (2021) · Energy and AI · doi:10.1016/j.egyai.2021.100049 · Cited by 208
Andersson, M., Beale, S. B., Espinoza, M., Wu, Z., & Lehnert, W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.010 · Cited by 204
Kim, J., Luo, G., & Wang, C. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.003 · Cited by 200
Priya, K., Sathishkumar, K., & Rajasekar, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.05.017 · Cited by 198
Protonated phosphonic acid electrodes for high power heavy-duty vehicle fuel cells
Lim, K. H., Lee, A. S., Atanasov, V., Kerres, J., Park, E. J., Adhikari, S., Maurya, S., Manriquez, L. D., Jung, J., Fujimoto, C., et al. (2022) · Nature Energy · doi:10.1038/s41560-021-00971-x · Cited by 196
Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells
Peng, L., Yi, P., & Lai, X. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.08.113 · Cited by 193
Correlations for the pressure drop for flow through metal foam
Dukhan, N. (2006) · Experiments in Fluids · doi:10.1007/s00348-006-0194-x · Cited by 192
How Machine Learning Will Revolutionize Electrochemical Sciences
Mistry, A., Franco, A. A., Cooper, S. J., Roberts, S. A., & Viswanathan, V. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00194 · Cited by 191
Lu, Z., Kandlikar, S. G., Rath, C. D., Grimm, M., Domigan, W., White, A. D., Hardbarger, M., Owejan, J. P., & Trabold, T. A. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.12.025 · Cited by 189
Estimation of contact resistance in proton exchange membrane fuel cells
Zhang, L., Liu, Y., Hai-min, S., Wang, S., Zhou, Y., & Hu, S. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.070 · Cited by 188
Overview of porous media/metal foam application in fuel cells and solar power systems
Tan, W. C., Saw, L. H., Thiam, H. S., Xuan, J., Cai, Z., & Yew, M. C. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.032 · Cited by 186
Real-Time Imaging of Liquid Water in an Operating Proton Exchange Membrane Fuel Cell
Hickner, M. A., Siegel, N. P., Chen, K. S., McBrayer, D. N., Hussey, D. S., Jacobson, D. L., & Arif, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2184893 · Cited by 185
Iranzo, A., Muñoz, M., Rosa, F., & Pino, J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.04.129 · Cited by 183
Carbon foams: 3D porous carbon materials holding immense potential
Liu, H., Wu, S., Tian, N., Yan, F., You, C., & Yang, Y. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08749a · Cited by 182
Self-citationHao, L., Moriyama, K., Gu, W., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0221508jes · Cited by 178
Zhao, X., Chen, H., Kong, F., Zhang, Y., Wang, S., Liu, S., Lucia, L. A., Fatehi, P., & Pang, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.159 · Cited by 178
Engineered Water Highways in Fuel Cells: Radiation Grafting of Gas Diffusion Layers
Forner‐Cuenca, A., Biesdorf, J., Gubler, L., Kristiansen, P. M., Schmidt, T. J., & Boillat, P. (2015) · Advanced Materials · doi:10.1002/adma.201503557 · Cited by 176
Zenyuk, I. V., Parkinson, D. Y., Hwang, G., & Weber, A. Z. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.02.005 · Cited by 172
Application of Machine Learning in Optimizing Proton Exchange Membrane Fuel Cells: A Review
Ding, R., Zhang, S., Chen, Y., Rui, Z., Hua, K., Wu, Y., Li, X., Duan, X., Wang, X., Li, J., et al. (2022) · Energy and AI · doi:10.1016/j.egyai.2022.100170 · Cited by 171
Self-citationMachine learning modeling for proton exchange membrane fuel cell performance
Legala, A., Zhao, J., & Li, X. (2022) · Energy and AI · doi:10.1016/j.egyai.2022.100183 · Cited by 171
Brown, E., Yan, P., Tekik, H., Elangovan, A., Wang, J., Lin, D., & Li, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107689 · Cited by 165
Biomimetic flow fields for proton exchange membrane fuel cells: A review of design trends
Iranzo, A., Arredondo, C. H., Kannan, A. M., & Rosa, F. (2020) · Energy · doi:10.1016/j.energy.2019.116435 · Cited by 165
Kim, S., Ahn, B. K., & Mench, M. M. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.114 · Cited by 162
Ferreira, R. B., Falcão, D. S., Oliveira, V. B., & Pinto, A. M. F. R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.124 · Cited by 160
Tsai, B.-T., Tseng, C., Liu, Z. S., Wang, C.-H., Lee, C.-I., Yang, C.-C., & Lo, S. K. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.05.008 · Cited by 158
Effects of flow field design on water management and reactant distribution in PEMFC: a review
Lim, B. H., Majlan, E. H., Daud, W. R. W., Husaini, T., & Rosli, M. I. (2016) · Ionics · doi:10.1007/s11581-016-1644-y · Cited by 158
1D + 3D two-phase flow numerical model of a proton exchange membrane fuel cell
Ferreira, R. B., Falcão, D. S., Oliveira, V. B., & Pinto, A. M. F. R. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.048 · Cited by 158
Tabe, Y., Saito, M., Fukui, K., & Chikahisa, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.052 · Cited by 156
Dynamic behaviour of liquid water emerging from a GDL pore into a PEMFC gas flow channel
Zhu, X., Sui, P., & Djilali, N. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.024 · Cited by 155
Seyhan, M., Akansu, Y. E., Murat, M., Korkmaz, Y., & Akansu, S. O. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.04.001 · Cited by 155
Zhang, G., Yuan, H. S., Wang, Y., & Jiao, K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113865 · Cited by 152
Self-citationZhao, J. F., Li, X., Shum, C., & McPhee, J. (2021) · Energy and AI · doi:10.1016/j.egyai.2021.100114 · Cited by 150
Zhou, Y., Lin, G., Shih, A. J., & Hu, S. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.019 · Cited by 149
Chen, Q., Niu, Z., Li, H., Jiao, K., & Wang, Y. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.12.076 · Cited by 148
Self-citationKumar, A., & Reddy, R. G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00540-2 · Cited by 147
Wilberforce, T., Ijaodola, O., Ogungbemi, E., Khatib, F. N., Leslie, T., El-Hassan, Z., Thomposon, J., & Olabi, A. G. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109286 · Cited by 147
Amamou, A. A., Kélouwani, S., Boulon, L., & Agbossou, K. (2016) · IEEE Access · doi:10.1109/access.2016.2597058 · Cited by 144
A review of metal separator plate materials suitable for automotive PEMfuel cells
Heras, N. D. L., Roberts, E. P. L., Langton, R., & Hodgson, D. R. (2008) · Energy & Environmental Science · doi:10.1039/b813231n · Cited by 143
Engineering Self‐Supported Noble Metal Foams Toward Electrocatalysis and Beyond
Du, R., Jin, X., Hübner, R., Fan, X., Hu, Y., & Eychmüller, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201901945 · Cited by 143
Carton, J. G., & Olabi, A. G. (2016) · Energy · doi:10.1016/j.energy.2016.02.010 · Cited by 142
3D Printed Mechanically Robust Graphene/CNT Electrodes for Highly Efficient Overall Water Splitting
Peng, M., Shi, D., Sun, Y., Cheng, J., Zhao, B., Xie, Y., Zhang, J., Guo, W., Jia, Z., Liang, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908201 · Cited by 141
Huo, S., Jiao, K., & Park, J. W. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.10.068 · Cited by 140
Self-citationDamián, C., Saldaña‐Robles, A., Hernández-Guerrero, A., & Cano-Andrade, S. (2017) · Energy · doi:10.1016/j.energy.2017.05.139 · Cited by 139
Two-Phase Transients of Polymer Electrolyte Fuel Cells
Wang, Y., & Wang, C. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2734076 · Cited by 136
Self-citationNumerical optimization of channel to land width ratio for PEM fuel cell
Chowdhury, M. Z., Genç, Ö., & Toros, S. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.149 · Cited by 135
A Review on Cold Start of Proton Exchange Membrane Fuel Cells
Wan, Z., Chang, H., Shu, S., Wang, Y., & Tang, H. (2014) · Energies · doi:10.3390/en7053179 · Cited by 134
Self-citationAtyabi, S. A., Afshari, E., Wongwises, S., Yan, W.-M., Hadjadj, A., & Shadloo, M. S. (2019) · Energy · doi:10.1016/j.energy.2019.05.031 · Cited by 133
Cho, S. C., Wang, Y., & Chen, K. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.057 · Cited by 131
Self-citationChang, B., Yin, H., Zhang, X., Zhang, S., & Yang, B. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.129 · Cited by 130
Laser perforated fuel cell diffusion media. Part I: Related changes in performance and water content
Manahan, M. P., Sr., Hatzell, M. C., Kumbur, E. C., & Mench, M. M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.014 · Cited by 129
Awin, Y., & Dukhan, N. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113458 · Cited by 128
Cold start of polymer electrolyte fuel cells: Three-stage startup characterization
Wang, Y., Mukherjee, P. P., Mishler, J., Mukundan, R., & Borup, R. L. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.12.029 · Cited by 125
Self-citationMetal foams application to enhance cooling of open cathode polymer electrolyte membrane fuel cells
Hossain, M. S., & Shabani, B. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.022 · Cited by 123
Thermal Applications of Open-Cell Metal Foams
Ozmat, B., Leyda, B., & Benson, B. (2004) · Materials and Manufacturing Processes · doi:10.1081/amp-200030568 · Cited by 122
Novel 3D collagen scaffolds fabricated by indirect printing technique for tissue engineering
Liu, C., Xia, Z., Han, Z., Hulley, P. A., Triffitt, J. T., & Czernuszka, J. T. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30975 · Cited by 117
Macroscopic In-Situ Modeling of Chemical Membrane Degradation in Polymer Electrolyte Fuel Cells
Wong, K. H., & Kjeang, E. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0031409jes · Cited by 113
Yuan, X., Nayoze-Coynel, C., Shaigan, N., Fisher, D. C., Zhao, N., Zamel, N., Gazdzicki, P., Ulsh, M., Friedrich, K. A., Girard, F., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229540 · Cited by 113
Analysis of the Key Parameters in the Cold Start of Polymer Electrolyte Fuel Cells
Wang, Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2767849 · Cited by 112
Self-citationHuo, S., Cooper, N. J., Smith, T. L., Park, J. W., & Jiao, K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.028 · Cited by 110
Self-citationShin, D. K., Yoo, J. H., Kang, D. G., & Kim, M. S. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.08.085 · Cited by 105
The effects of flow-field orientation on water management in PEM fuel cells with serpentine channels
Ashrafi, M., & Shams, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.044 · Cited by 105
Niu, Z., Wu, J., Bao, Z., Wang, Y., Yin, Y. S., & Jiao, K. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.05.008 · Cited by 105
Self-citationBehaviors of proton exchange membrane fuel cells under oxidant starvation
Dou, M., Hou, M., Liang, D., Shen, Q., Zhang, H., Lu, W., Shao, Z., & Yi, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.005 · Cited by 102
Hou, Y., Deng, H., Pan, F., Chen, W., Du, Q., & Jiao, K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113561 · Cited by 100
Self-citationSong, B., Sui, T., Ying, S., Li, L., Lü, L., & Korsunsky, A. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04151a · Cited by 99
Investigation of the effect of micro-porous layer on PEM fuel cell cold start operation
Xie, X. L., Wang, R., Jiao, K., Zhang, G., Zhou, J., & Du, Q. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.10.039 · Cited by 99
Self-citationNumerical estimation of the effective electrical conductivity in carbon paper diffusion media
Zamel, N., Li, X., & Shen, J. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.08.037 · Cited by 97
Zhang, Z., Cheng, J., & He, X. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.012 · Cited by 97
Jo, A., & Ju, H. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.01.003 · Cited by 96
A 3-D multiphase model of proton exchange membrane electrolyzer based on open-source CFD
Xu, Y., Zhang, G., Wu, L., Bao, Z., Zu, B., & Jiao, K. (2021) · Digital Chemical Engineering · doi:10.1016/j.dche.2021.100004 · Cited by 94
Self-citationKhetabi, E. M., Bouziane, K., Zamel, N., François, X., Meyer, Y., & Candusso, D. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.03.071 · Cited by 89
Zamel, N., Li, X., Becker, J., & Wiegmann, A. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.01.146 · Cited by 88
Numerical investigation of innovative 3D cathode flow channel in proton exchange membrane fuel cell
Niu, Z., Fan, L., Bao, Z., & Jiao, K. (2018) · International Journal of Energy Research · doi:10.1002/er.4086 · Cited by 88
Self-citationWilberforce, T., Khatib, F. N., Ijaodola, O., Ogungbemi, E., El-Hassan, Z., Durrant, A., Thompson, J. M., & Olabi, A. G. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.430 · Cited by 87
Liu, X., Peng, F., Lou, G., & Wen, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.092 · Cited by 86
Ozden, A., Shahgaldi, S., Zhao, J. F., Li, X., & Hamdullahpur, F. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.10.209 · Cited by 86
Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam
Park, J. E., Lim, J., Lim, M. S., Kim, S., Kim, O., Lee, D. W., Lee, J. H., Cho, Y., & Sung, Y. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134808 · Cited by 85
Low-cost carbon foam as a practical support for organic phase change materials in thermal management
Maleki, M., Imani, A., Ahmadi, R., Emrooz, H. B. M., & Beitollahi, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114108 · Cited by 82
Niri, M. F., Liu, K., Apachitei, G., Román‐Ramírez, L. A., Lain, M. J., Widanage, W. D., & Marco, J. (2021) · Energy and AI · doi:10.1016/j.egyai.2021.100129 · Cited by 82
Tsukamoto, T., Aoki, T., Kanesaka, H., Taniguchi, T., Takayama, T., Motegi, H., Takayama, R., Tanaka, S., Komiyama, K., & Yoneda, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229412 · Cited by 81
Xie, X. L., Zhang, G., Zhou, J., & Jiao, K. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.02.183 · Cited by 80
Self-citationTwo-phase flow in compressed gas diffusion layer: Finite element and volume of fluid modeling
Zhou, X., Niu, Z., Bao, Z., Wang, J., Liu, Z., Yin, Y. S., Du, Q., & Jiao, K. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226933 · Cited by 80
Self-citationChallenges and opportunities in modelling of proton exchange membrane fuel cells (PEMFC)
Jiao, K., & Ni, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3798 · Cited by 77
Self-citationDing, R. F., Yin, W., Cheng, G., Chen, Y., Wang, J., Wang, R., Rui, Z., Li, J., & Liu, J. (2021) · Energy and AI · doi:10.1016/j.egyai.2021.100098 · Cited by 77
Numerical simulation of gas liquid two-phase flow in anode channel of low-temperature fuel cells
Hou, Y., Zhang, G., Qin, Y., Du, Q., & Jiao, K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.219 · Cited by 76
Self-citationCho, S. C., Wang, Y., & Chen, K. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.033 · Cited by 75
Self-citationAchieving breakthrough performance caused by optimized metal foam flow field in fuel cells
Park, J. E., Hwang, W., Lim, M. S., Kim, S., Ahn, C., Kim, O., Shim, J., Lee, D. W., Lee, J. H., Cho, Y., et al. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.06.073 · Cited by 75
Porous-Media Flow Fields for Polymer Electrolyte Fuel Cells
Wang, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3183785 · Cited by 73
Self-citationNext-Generation Polymer-Electrolyte-Membrane Fuel Cells Using Titanium Foam as Gas Diffusion Layer
Choi, H., Kim, O., Kim, M., Choe, H., Cho, Y., & Sung, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500962h · Cited by 72
Jiang, H., Yang, L., Deng, W., Tan, Y., & Xie, Q. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.064 · Cited by 72
Shum, A. D., Parkinson, D. Y., Xiao, X., Weber, A. Z., Burheim, O. S., & Zenyuk, I. V. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.012 · Cited by 72
Porous-Media Flow Fields for Polymer Electrolyte Fuel Cells
Wang, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3183781 · Cited by 71
Self-citationPEM Fuel Cells: Thermal and Water Management Fundamentals
Wang, Y., Chen, K. S., & Cho, S. C. (2013) · doi:10.5643/9781606502471 · Cited by 71
Self-citationEffects of bolt pre-loading variations on performance of GDL in a bolted PEMFC by 3-D FEM analysis
Chien, C., Hu, Y.-L., Su, T., Liu, H.-T., Wang, C.-T., Yang, P., & Lu, Y.-X. (2016) · Energy · doi:10.1016/j.energy.2016.07.075 · Cited by 71
Degradation behaviors of polymer electrolyte membrane fuel cell under freeze/thaw cycles
Luo, M., Huang, C., Liu, W., Luo, Z., & Pan, M. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.06.036 · Cited by 70
Hao, L., Moriyama, K., Gu, W., & Wang, C. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1461607jes · Cited by 70
Validation methodology for PEM fuel cell three-dimensional simulation
Xie, B., Ni, M., Zhang, G., Sheng, X., Tang, H., Xu, Y., Zhai, G., & Jiao, K. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.122705 · Cited by 70
Self-citationCarcadea, E., Varlam, M., Ingham, D. B., Ismail, M. S., Patularu, L. G., Marinoiu, A., & Schitea, D. (2018) · International Journal of Energy Research · doi:10.1002/er.4068 · Cited by 68
Assembly design of proton exchange membrane fuel cell stack with stamped metallic bipolar plates
Qiu, D., Yi, P., Peng, L., & Lai, X. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.03.064 · Cited by 67
Sim, Y., Kwak, J., Kim, S., Jo, Y., Kim, S., Kim, S. Y., Kim, J. H., Lee, C., Jo, J. H., & Kwon, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07598g · Cited by 66
Zhu, X., Yang, C., Wu, P., Ma, Z., Shang, Y., Bai, G., Liu, X., Chang, G., Li, N., Dai, J., et al. (2020) · Nanoscale · doi:10.1039/c9nr07861d · Cited by 66
Self-citationMachine learning for integrating combustion chemistry in numerical simulations
Nguyen, H.-T., Domingo, P., Vervisch, L., & Nguyen, P.-D. (2021) · Energy and AI · doi:10.1016/j.egyai.2021.100082 · Cited by 65
Niu, Z., Pinfield, V. J., Wu, B., Wang, H., Jiao, K., Leung, D. Y. C., & Xuan, J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00398d · Cited by 64
Self-citationSenn, S. M., & Dimos Poulikakos, A. (2004) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.1738424 · Cited by 63
Preparation and characterization of graphite foams
Kim, J., Jeong, E., & Lee, Y. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.09.003 · Cited by 61
Zhang, H., Xiao, L., Chuang, P. A., Djilali, N., & Sui, P.-C. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113316 · Cited by 61
Zhou, X., Wu, L., Niu, Z., Bao, Z., Sun, X., Liu, Z., Li, Y., Jiao, K., Liu, Z., & Du, Q. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119370 · Cited by 61
Self-citationLiu, R., Zhou, W., Li, S., Li, F., & Ling, W. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.04.238 · Cited by 60
Heat transfer in PEM cooling flow field with high porosity metal foam insert
Vazifeshenas, Y., Sedighi, K., & Shakeri, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.069 · Cited by 59
Cited by
Chang, J., Shi, Y., Wu, H., Yu, J., Jing, W., Wang, S., Waterhouse, G. I. N., Tang, Z., & Lu, S. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.3c13248 · Cited by 413
Metadata
- Authors
- Zhang, G., Qu, Z., Tao, W.-Q., Wang, X., Wu, L., Wu, S., Xie, X., Tongsh, C., Huo, W., Bao, Z., Jiao, K., & Wang, Y.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-12-29
- Volume
- 123
- Issue
- 3
- Pages
- 989-1039
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4313280037
- Cited by
- 274
- References
- 274
- FWCI
- 2.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.