The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Attainable Gravimetric and Volumetric Energy Density of Li–S and Li Ion Battery Cells with Solid Separator-Protected Li Metal Anodes
Abstract
As a result of sulfur's high electrochemical capacity (1675 mA h/gs), lithium-sulfur batteries have received significant attention as a potential high-specific-energy alternative to current state-of-the-art rechargeable Li ion batteries. For Li-S batteries to compete with commercially available Li ion batteries, high-capacity anodes, such as those that use Li metal, will need to be enabled to fully exploit sulfur's high capacity. The development of Li metal anodes has focused on eliminating Coulombically inefficient and dendritic Li cycling, and to this end, an interesting direction of research is to protect Li metal by employing mechanically stiff solid-state Li(+) conductors, such as garnet phase Li7La3Zr2O12 (LLZO), NASICON-type Li1+xAlxTi2-x(PO4)3 (LATP), and Li2S-P2S5 glasses (LPS), as electrode separators. Basic calculations are used to quantify useful targets for solid Li metal protective separator thickness and cost to enable Li metal batteries in general and Li-S batteries specifically. Furthermore, maximum electrolyte-to-sulfur ratios that allow Li-S batteries to compete with Li ion batteries are calculated. The results presented here suggest that controlling the complex polysulfide speciation chemistry in Li-S cells with realistic, minimal electrolyte loading presents a meaningful opportunity to develop Li-S batteries that are competitive on a specific energy basis with current state-of-the-art Li ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Lithium Diffusion in Graphitic Carbon
Persson, K., Sethuraman, V. A., Hardwick, L. J., Hinuma, Y., Meng, Y. S., van der Ven, A., Srinivasan, V., Kostecki, R., & Ceder, G. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100188d · Cited by 852
Zheng, H., Li, J., Song, X., Liu, G., & Battaglia, V. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.161 · Cited by 674
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Sulfur Speciation in Li–S Batteries Determined by Operando X-ray Absorption Spectroscopy
Cuisinier, M., Cabelguen, P.-E., Evers, S., He, G., Kolbeck, M., Garsuch, A., Bolin, T., Balasubramanian, M., & Nazar, L. F. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401763d · Cited by 550
Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Sandwich‐Like, Graphene‐Based Titania Nanosheets with High Surface Area for Fast Lithium Storage
Yang, S., Feng, X., & Müllen, K. (2011) · Advanced Materials · doi:10.1002/adma.201101599 · Cited by 520
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095868 · Cited by 471
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
Stone, G. M., Mullin, S. A., Teran, A. A., Hallinan, D. T., Minor, A. M., Hexemer, A., & Balsara, N. P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030203jes · Cited by 438
Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8278 · Cited by 428
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
New insights into the limiting parameters of the Li/S rechargeable cell
Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398
Prospects and Limits of Energy Storage in Batteries
Abraham, K. M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5026273 · Cited by 348
Formation of lithium polysulfides in aprotic media
Rauh, R. D., Shuker, F. S., Marston, J. M., & Brummer, S. B. (1977) · Journal of Inorganic and Nuclear Chemistry · doi:10.1016/0022-1902(77)80198-x · Cited by 338
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers
Marks, T., Trussler, S., Smith, A. J., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515072 · Cited by 290
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
High Energy Rechargeable Li-S Cells for EV Application: Status, Remaining Problems and Solutions
Mikhaylik, Y. V., Kovalev, I., Schock, R., Kumaresan, K., Xu, J., & Affinito, J. (2010) · ECS Transactions · doi:10.1149/1.3414001 · Cited by 209
X-ray Absorption Spectra of Dissolved Polysulfides in Lithium–Sulfur Batteries from First-Principles
Pascal, T. A., Wujcik, K. H., Velasco‐Vélez, J., Wu, C., Teran, A. A., Kapilashrami, M., Cabana, J., Guo, J., Salmerón, M., Balsara, N. P., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500260s · Cited by 172
Aqueous and nonaqueous lithium-air batteries enabled by water-stable lithium metal electrodes
Visco, S. J., Nimon, V., Petrov, A., et al. (2014) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-014-2427-x · Cited by 67
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Promising Routes to a High Li+ Transference Number Electrolyte for Lithium Ion Batteries
Diederichsen, K. M., McShane, E. J., & McCloskey, B. D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00792 · Cited by 874
Self-citation
Metadata
- Authors
- McCloskey, B. D.
- Venue
- The Journal of Physical Chemistry Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-06
- Volume
- 6
- Issue
- 22
- Pages
- 4581-4588
- ISSN
- 1948-7185 (ISSN-L)
- OpenAlex
- W2425438201
- Cited by
- 281
- References
- 36
- FWCI
- 14.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.