The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Highly Anisotropic Thermal Conductivity of Layer-by-Layer Assembled Nanofibrillated Cellulose/Graphene Nanosheets Hybrid Films for Thermal Management
Abstract
An anisotropic thermally conductive film with tailorable microstructures and macroproperties is fabricated using a layer-by-layer (LbL) assembly of graphene oxide (GO) and nanofibrillated cellulose (NFC) on a flexible NFC substrate driven by hydrogen bonding interactions, followed by chemical reduction process. The resulting NFC/reduced graphene oxide (RGO) hybrid film reveals an orderly hierarchical structure in which the RGO nanosheets exhibit a high degree of orientation along the in-plane direction. The assembly cycles dramatically increase the in-plane thermal conductivity (λ X ) of the hybrid film to 12.6 W·m –1 ·K –1, while the cross-plane thermal conductivity (λ Z ) shows a lower value of 0.042 W·m –1 ·K –1 in the hybrid film with 40 assembly cycles. The thermal conductivity anisotropy reaches up to λ X /λ Z = 279, which is substantially larger than that of similar polymeric nanocomposites, indicating that the LbL assembly on a flexible NFC substrate is an efficient technique for the preparation of polymeric nanocomposites with improved heat conducting property. Moreover, the layered hybrid film composed of 1D NFC and 2D RGO exhibits synergetic mechnical properties with outstanding flexibility and a high tensile strength (107 MPa). The combination of anisotropic thermal conductivity and superior mechanical performance may facilitate the applications in thermal management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Huang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Exfoliated Graphene Separated by Platinum Nanoparticles
Si, Y., & Samulski, E. T. (2008) · Chemistry of Materials · doi:10.1021/cm801356a · Cited by 1,126
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927
Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Solid State Communications · doi:10.1016/j.ssc.2012.04.034 · Cited by 829
Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites
Teng, C.-C., Ma, C.-C. M., Lu, C.-H., Yang, S.-Y., Lee, S.-H., Hsiao, M.-C., Yen, M.-Y., Chiou, K.-C., & Lee, T.-M. (2011) · Carbon · doi:10.1016/j.carbon.2011.06.095 · Cited by 766
Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites
Ganguli, S., Roy, A. K., & Anderson, D. P. (2008) · Carbon · doi:10.1016/j.carbon.2008.02.008 · Cited by 674
Song, S. H., Park, K. H., Kim, B. H., Choi, Y. W., Jun, G. H., Lee, D. J., Kong, B., Paik, K., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201202736 · Cited by 667
Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects
Shtein, M., Nadiv, R., Buzaglo, M., Kahil, K., & Regev, O. (2015) · Chemistry of Materials · doi:10.1021/cm504550e · Cited by 606
Renteria, J. D., Ramirez, S., Malekpour, H., Alonso, B., Centeno, A., Zurutuza, A., Cocemasov, A. I., Nika, D. L., & Balandin, A. A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501429 · Cited by 579
Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
Thermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites With High Packing Density
Marconnet, A. M., Yamamoto, N., Panzer, M. A., Wardle, B. L., & Goodson, K. E. (2011) · ACS Nano · doi:10.1021/nn200847u · Cited by 474
Lin, Z., Liu, Y., Raghavan, S., Moon, K.-S., Sitaraman, S. K., & Wong, C.-P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401939z · Cited by 469
Preparation of Covalently Functionalized Graphene Using Residual Oxygen-Containing Functional Groups
Hsiao, M.-C., Liao, S.-H., Yen, M.-Y., Liu, P.-I., Pu, N.-W., Wang, C.-A., & Ma, C.-C. M. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100597d · Cited by 414
Bao, C., Guo, Y., Song, L., & Hu, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11662b · Cited by 399
Yao, H.-B., Fang, H.-Y., Wang, X.-H., & Yu, S.-H. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00121j · Cited by 394
Lin, X., Shen, X., Zheng, Q., Yousefi, N., Ye, L., Mai, Y.-W., & Kim, J.-K. (2012) · ACS Nano · doi:10.1021/nn303904z · Cited by 389
Thermal conductivity of graphite in the basal plane
Klemens, P. G., & Pedraza, D. F. (1994) · Carbon · doi:10.1016/0008-6223(94)90096-5 · Cited by 386
Shen, X., Wang, Z., Wu, Y., Liu, X., He, Y.-B., & Kim, J.-K. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00722 · Cited by 382
Carbon Nanosheets for Polymeric Nanocomposites with High Thermal Conductivity
Veca, L. M., Meziani, M. J., Wang, W., Wang, X., Lu, F., Zhang, P., Lin, Y., Fee, R., Connell, J. W., & Sun, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802317 · Cited by 355
Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene/Epoxy Composite
Li, Q., Guo, Y., Li, W., Qiu, S., Zhu, C., Wei, X., Chen, M., Liu, C., Liao, S., Gong, Y., et al. (2014) · Chemistry of Materials · doi:10.1021/cm501473t · Cited by 351
Phononics in low-dimensional materials
Balandin, A. A., & Nika, D. L. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70117-7 · Cited by 314
Xie, B.-H., Huang, X., & Zhang, G.-J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.06.010 · Cited by 293
Wu, H., & Drzal, L. T. (2012) · Carbon · doi:10.1016/j.carbon.2011.10.026 · Cited by 290
Yao, Y., Zeng, X., Wang, F., Sun, R., Xu, J.-B., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04187 · Cited by 279
Layer-by-Layer Assembly for Graphene-Based Multilayer Nanocomposites: Synthesis and Applications
Lee, T., Min, S. H., Gu, M., Jung, Y. K., Lee, W., Lee, J. U., Seong, D. G., & Kim, B.-S. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00491 · Cited by 277
Chen, Y., Zhang, X., Yu, P., & Ma, Y. (2009) · Chemical Communications · doi:10.1039/b907723e · Cited by 275
Graphene Aerogel/Epoxy Composites with Exceptional Anisotropic Structure and Properties
Wang, Z., Shen, X., Akbari Garakani, M., Lin, X., Wu, Y., Liu, X., Sun, X., & Kim, J.-K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00146 · Cited by 272
Yousefi, N., Lin, X., Zheng, Q., Shen, X., Pothnis, J. R., Jia, J., Zussman, E., & Kim, J.-K. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.034 · Cited by 272
Graphene/cellulose nanocomposite paper with high electrical and mechanical performances
Luong, N. D., Pahimanolis, N., Hippi, U., Korhonen, J. T., Ruokolainen, J., Johansson, L.-S., Nam, J.-D., & Seppälä, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12134k · Cited by 263
Thermally reduced graphene oxide films as flexible lateral heat spreaders
Song, N.-J., Chen, C.-M., Lu, C., Liu, Z., Kong, Q.-Q., & Cai, R. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02693d · Cited by 260
Self-citationKumar, P., Yu, S., Shahzad, F., Hong, S. M., Kim, Y.-H., & Koo, C. M. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.088 · Cited by 250
Nanocellulose electroconductive composites
Shi, Z., Phillips, G. O., & Yang, G. (2013) · Nanoscale · doi:10.1039/c3nr00408b · Cited by 237
Hamedi, M., Karabulut, E., Marais, A., Herland, A., Nyström, G., & Wågberg, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201305137 · Cited by 230
Ouyang, W., Sun, J., Memon, J., Wang, C., Geng, J., & Huang, Y. (2013) · Carbon · doi:10.1016/j.carbon.2013.06.049 · Cited by 223
Song, N., Jiao, D., Ding, P., Cui, S., Tang, S., & Shi, L. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc02194d · Cited by 199
Self-citationThermal conductivity of exfoliated graphite nanoplatelet paper
Xiang, J., & Drzal, L. T. (2011) · Carbon · doi:10.1016/j.carbon.2010.10.003 · Cited by 190
Lin, W., Moon, K., & Wong, C. P. (2009) · Advanced Materials · doi:10.1002/adma.200803548 · Cited by 190
Jung, H., Yu, S., Bae, N.-S., Cho, S. M., Kim, R. H., Cho, S. H., Hwang, I., Jeong, B., Ryu, J. S., Hwang, J., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02681 · Cited by 186
Tian, X., Itkis, M. E., Bekyarova, E. B., & Haddon, R. C. (2013) · Scientific Reports · doi:10.1038/srep01710 · Cited by 164
Cellulose nanofibers/reduced graphene oxide flexible transparent conductive paper
Gao, K., Shao, Z., Wu, X., Wang, X., Li, J., Zhang, Y., Wang, W., & Wang, F. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.067 · Cited by 156
Graphene woven fabric-reinforced polyimide films with enhanced and anisotropic thermal conductivity
Gong, J., Liu, Z., Yu, J., Dai, D., Dai, W., Du, S., Li, C., Jiang, N., Zhan, Z., & Lin, C. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.010 · Cited by 149
Cheng, C., Li, S., Nie, S., Zhao, W., Yang, H., Sun, S., & Zhao, C. (2012) · Biomacromolecules · doi:10.1021/bm3014999 · Cited by 148
Zhu, J. G., Zhang, H., & Kotov, N. A. (2013) · ACS Nano · doi:10.1021/nn400972t · Cited by 132
Multiscale modeling of heat conduction in graphene laminates
Mortazavi, B., & Rabczuk, T. (2014) · Carbon · doi:10.1016/j.carbon.2014.12.046 · Cited by 120
Song, N., Yang, J., Ding, P., Tang, S., & Shi, L. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.03.018 · Cited by 100
Self-citation3D Bridged Carbon Nanoring/Graphene Hybrid Paper as a High‐Performance Lateral Heat Spreader
Zhang, J., Shi, G., Jiang, C., Ju, S., & Jiang, D. (2015) · Small · doi:10.1002/smll.201501878 · Cited by 97
Graphene Oxides Dispersing and Hosting Graphene Sheets for Unique Nanocomposite Materials
Tian, L., Anilkumar, P., Cao, L., Kong, C. Y., Meziani, M. J., Qian, H., Veca, L. M., Thorne, T. J., Tackett, K. N., Edwards, T., et al. (2011) · ACS Nano · doi:10.1021/nn200162z · Cited by 89
Dang, L. N., & Seppälä, J. V. (2015) · Cellulose · doi:10.1007/s10570-015-0622-2 · Cited by 82
Zhou, S., Chiang, S., Xu, J., et al. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.045 · Cited by 78
In Situ Carbonized Cellulose-Based Hybrid Film as Flexible Paper Anode for Lithium-Ion Batteries
Cao, S., Feng, X., Song, Y., Liu, H., Miao, M., Fang, J., & Shi, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10648 · Cited by 78
Self-citationZhou, S., Xu, J., Yang, Q., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.02.018 · Cited by 67
Zhao, J., Wei, Z., Feng, X., Miao, M., Sun, L., Cao, S., Shi, L., & Fang, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5026352 · Cited by 53
Self-citationLee, J., Jung, H., Yu, S.-G., Cho, S. M., Tiwari, V. K., Velusamy, D. B., & Park, C. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600470 · Cited by 50
Mai, C., Líu, J., Evans, C. M., Segalman, R. A., Chabinyc, M. L., Cahill, D. G., & Bazan, G. C. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00546 · Cited by 36
Cited by
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Thermally Insulating Nanocellulose‐Based Materials
Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2021) · Advanced Materials · doi:10.1002/adma.202001839 · Cited by 394
Zhang, Y., Heo, Y.-J., Son, Y.-R., In, I., An, K.-H., Kim, B.-J., & Park, S.-J. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.077 · Cited by 341
Zhang, X., Xu, Y., Zhang, X., Wu, H., Shen, J., Chen, R., Xiong, Y., Li, J., & Guo, S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.002 · Cited by 325
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Metadata
- Authors
- Song, N., Jiao, D., Cui, S., Hou, X., Ding, P., & Shi, L.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-01-10
- Volume
- 9
- Issue
- 3
- Pages
- 2924-2932
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2564292562
- Cited by
- 317
- References
- 64
- FWCI
- 18.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
