Internal Water-Induced Acceleration, Chemical Pathways, and Contributing Factors in the Degradation of Poly(lactic- co -glycolic acid) (PLGA) Microparticles and Devices
The DOI matches its Crossref record; 97 of the 97 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid) (PLA) and poly(lactic- co -glycolic acid) (PLGA) are FDA-approved, biodegradable polymers widely used in medical applications, especially in controlled drug release systems and surgical devices. To be able to predict and control the degradation kinetics of such systems, it is essential to study the effect of various parameters on the degradation rate. In this work, a review is presented concerning the hydrolytic degradation of PLA and PLGA. The effects of solvent dielectric constant, pH, lactate and glycolate content, stereoisomers and crystallinity, degradation temperature, glass transition temperature ( T g ), and melting temperature ( T m ), monomer sequence in PLGA copolymers, and polymer molecular weight in PLA/PLGA are reviewed. In vitro/in vivo correlation (IVIVC) limitations are addressed. The main purpose of this paper is to provide a comprehensive review of the results on the hydrolytic degradation of PLA/PLGA available in the literature and to offer clarification on certain aspects that remain less well understood. In particular, we aim to provide insights into the factors underlying the varying and sometimes contrasting findings reported in relatively recent studies. We propose a new explanation for accelerated degradation in the core of PLA/PLGA matrices─internal water-induced acceleration─and discuss how this perspective offers an alternative to existing acid-acceleration models, which appear insufficient to explain some of the more recent data. Additionally, we address topics related to (i) the absence of the backbiting reaction in bulk matrices, (ii) the presence and influence of mass transport of both water and the degradation products, and (iii) the effect of monomer sequence on PLGA copolymer degradation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Why degradable polymers undergo surface erosion or bulk erosion
Burkersroda, F. V., Schedl, L., & Göpferich, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00170-9 · Cited by 1,146
Hydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Guanidine and Amidine Organocatalysts for Ring-Opening Polymerization of Cyclic Esters
Lohmeijer, B. G. G., Pratt, R. C., Leibfarth, F., Logan, J. W., Long, D. A., Dove, A. P., Nederberg, F., Choi, J., Wade, C., Waymouth, R. M., et al. (2006) · Macromolecules · doi:10.1021/ma0619381 · Cited by 816
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Degradation of poly(lactic-co-glycolic acid) microspheres: Effect of copolymer composition
Park, T. G. (1995) · Biomaterials · doi:10.1016/0142-9612(95)93575-x · Cited by 642
Degradability of Polymers for Implantable Biomedical Devices
Lyu, S., & Untereker, D. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10094033 · Cited by 538
A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications
Casalini, T., Rossi, F., Castrovinci, A., & Perale, G. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00259 · Cited by 500
Li, S., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701077 · Cited by 488
Alexis, F. (2005) · Polymer International · doi:10.1002/pi.1697 · Cited by 443
Biodegradation of PLA/GA polymers: increasing complexity
Vert, M., Mauduit, J., & Li, S. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90271-2 · Cited by 425
de Jong, S. J., Arias, E. R., Rijkers, D. T. S., van Nostrum, C. F., Kettenes-van den Bosch, J. J., & Hennink, W. E. (2001) · Polymer · doi:10.1016/s0032-3861(00)00646-7 · Cited by 414
Injectable, long-acting PLGA formulations: Analyzing PLGA and understanding microparticle formation
Park, K., Skidmore, S., Hadar, J., Garner, J., Park, H., Otte, A., Soh, B. K., Yoon, G., Yu, D., Yun, Y., et al. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.05.003 · Cited by 404
Phenomenology of the Initial Burst Release of Drugs from PLGA Microparticles
Yoo, J., & Won, Y.-Y. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01228 · Cited by 392
Self-citationLi, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700872 · Cited by 383
Degradation of poly (D,L-lactic acid) microspheres: Effect of molecular weight
Park, T. G. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)90263-1 · Cited by 359
A Mechanistic Study of the Hydrolytic Stability of Poly(2-(dimethylamino)ethyl methacrylate)
van de Wetering, P., Zuidam, N. J., van Steenbergen, M. J., van der Houwen, O. A. G. J., Underberg, W. J. M., & Hennink, W. E. (1998) · Macromolecules · doi:10.1021/ma980689g · Cited by 332
How Autocatalysis Accelerates Drug Release from PLGA-Based Microparticles: A Quantitative Treatment
Siepmann, J., Elkharraz, K., Siepmann, F., & Klose, D. (2005) · Biomacromolecules · doi:10.1021/bm050228k · Cited by 308
Exploiting Sequence To Control the Hydrolysis Behavior of Biodegradable PLGA Copolymers
Li, J., Stayshich, R. M., & Meyer, T. Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200895s · Cited by 249
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Tsuji, H. (2002) · Polymer · doi:10.1016/s0032-3861(01)00752-2 · Cited by 226
Crystallinity and mechanical properties of optically pure polylactides and their blends
Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214
Schliecker, G., Schmidt, C., Fuchs, S., & Kissel, T. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00243-6 · Cited by 208
Polymerization process modeling
(1996) · Choice Reviews Online · doi:10.5860/choice.33-5113 · Cited by 205
Critical Review on Sustainable Homogeneous Cellulose Modification: Why Renewability Is Not Enough
Onwukamike, K. N., Grelier, S., Grau, E., Cramail, H., & Meier, M. A. R. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04990 · Cited by 202
Acid- and base-catalyzed hydrolyses of aliphatic polycarbonates and polyesters
Jung, J. H., Ree, M., & Kim, H. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.060 · Cited by 194
Siparsky, G. L., Voorhees, K. J., Dorgan, J. R., & Schilling, K. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763656 · Cited by 191
The influence of the solvent on reaction rates
Laidler, K. J., & Landskroener, P. A. (1956) · Transactions of the Faraday Society · doi:10.1039/tf9565200200 · Cited by 191
Li, J., Rothstein, S. N., Little, S. R., Edenborn, H. M., & Meyer, T. Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306866w · Cited by 186
Kinetics of the hydrolytic degradation of poly(lactic acid)
Codari, F., Lazzari, S., Soos, M., Storti, G., Morbidelli, M., & Moscatelli, D. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.026 · Cited by 184
Hydrolysis and Biodegradation of Poly(lactic acid)
Gorrasi, G., & Pantani, R. (2017) · Advances in Polymer Science · doi:10.1007/12_2016_12 · Cited by 181
Stayshich, R. M., & Meyer, T. Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja102670n · Cited by 178
Surface stratification determines the interfacial water structure of simple electrolyte solutions
Litman, Y. E., Chiang, K.-Y., Seki, T., Nagata, Y., & Bonn, M. (2024) · Nature Chemistry · doi:10.1038/s41557-023-01416-6 · Cited by 168
Saha, S. K., & Tsuji, H. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.12.009 · Cited by 162
Rived, F., Canals, I., Bosch, E., & Rosés, M. (2001) · Analytica Chimica Acta · doi:10.1016/s0003-2670(01)01046-7 · Cited by 154
Yu, L., Zhang, Z., & Ding, J. (2011) · Biomacromolecules · doi:10.1021/bm101572j · Cited by 153
Hydrolytic degradation of oligo(lactic acid): a kinetic and mechanistic study
van Nostrum, C. F., Veldhuis, T. F. J., Bos, G. W., & Hennink, W. E. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.001 · Cited by 150
Zong, X.-H., Wang, Z.-G., Hsiao, B. S., Chu, B., Zhou, J. J., Jamiolkowski, D. D., Muse, E., & Dormier, E. (1999) · Macromolecules · doi:10.1021/ma990630p · Cited by 141
Aso, Y., Yoshioka, S., LIWANPO, A., & Terao, T. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)90248-8 · Cited by 131
Poly(L‐lactide). IX. Hydrolysis in acid media
Tsuji, H., & Nakahara, K. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10813 · Cited by 124
Grayson, A. C. R., Cima, M. J., & Langer, R. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.033 · Cited by 124
Washington, M. A., Swiner, D. J., Bell, K. R., Fedorchak, M. V., Little, S. R., & Meyer, T. Y. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.037 · Cited by 124
Mohammad, A. K., & Reineke, J. J. (2013) · Molecular Pharmaceutics · doi:10.1021/mp300559v · Cited by 122
Elevated temperature degradation of a 50:50 copolymer of PLA-PGA
Agrawal, C. M., Huang, D., Schmitz, J. P., & Athanasiou, K. A. (1997) · Tissue Engineering · doi:10.1089/ten.1997.3.345 · Cited by 120
Hydrolytic degradation of poly(d,l-lactide) as a function of end group: Carboxylic acid vs. hydroxyl
Wiggins, J. S., Hassan, M. K., Mauritz, K. A., & Storey, R. F. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.021 · Cited by 116
Syntheses of polylactides by means of tin catalysts
Kricheldorf, H. R., & Weidner, S. M. (2022) · Polymer Chemistry · doi:10.1039/d2py00092j · Cited by 116
Morphological behaviour of poly(lactic acid) during hydrolytic degradation
Zhang, X., Espiritu, M., Bilyk, A., & Kurniawan, L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.007 · Cited by 115
The influence of the functional end groups on the properties of polylactide-based materials
Kost, B., Basko, M., Bednarek, M., Socka, M., Kopka, B., Łapienis, G., Biela, T., Kubisa, P., & Brzeziński, M. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101556 · Cited by 114
Structural changes of polylactic-acid (PLA) microspheres under hydrolytic degradation
Gonzalez, M. F., Ruseckaite, R. A., & Cuadrado, T. R. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990222)71:8<1223::aid-app2>3.0.co;2-i · Cited by 107
Loo, S. C. J., Ooi, C. P., Wee, S. H. E., & Boey, Y. C. F. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.08.031 · Cited by 100
Neradovic, D., van Steenbergen, M. J., Vansteelant, L., Meijer, Y. J., van Nostrum, C. F., & Hennink, W. E. (2003) · Macromolecules · doi:10.1021/ma034381n · Cited by 95
Ring-Opening Polymerization of l,l-Lactide: Kinetic and Modeling Study
Yu, Y., Storti, G., & Morbidelli, M. (2009) · Macromolecules · doi:10.1021/ma901359x · Cited by 93
Washington, M. A., Balmert, S. C., Fedorchak, M. V., Little, S. R., Watkins, S. C., & Meyer, T. Y. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.043 · Cited by 93
Nature of Excess Hydrated Proton at the Water–Air Interface
Das, S., Imoto, S., Sun, S., Nagata, Y., Backus, E. H. G., & Bonn, M. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10807 · Cited by 93
Lu, Y., Swisher, J. H., Meyer, T. Y., & Coates, G. W. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c00248 · Cited by 90
Sherck, N. J., Kim, H. C., & Won, Y.-Y. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00621 · Cited by 89
Self-citationDesign and Control of Compostability in Synthetic Biopolyesters
Samantaray, P. K., Little, A., Wemyss, A. M., Iacovidou, E., & Wan, C. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c01424 · Cited by 88
Improved Mathematical Model for the Hydrolytic Degradation of Aliphatic Polyesters
Antheunis, H., van der Meer, J.-C., de Geus, M., Kingma, W., & Koning, C. E. (2009) · Macromolecules · doi:10.1021/ma802222m · Cited by 82
Deng, M., Zhou, J., Chen, G., Burkley, D., Xu, Y., Jamiolkowski, D., & Barbolt, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.067 · Cited by 75
PLGA Erosion: Solubility- or Diffusion-Controlled?
Körber, M. (2010) · Pharmaceutical Research · doi:10.1007/s11095-010-0232-5 · Cited by 74
Rapier, C. E., Shea, K. J., & Lee, A. P. (2021) · Scientific Reports · doi:10.1038/s41598-021-93785-6 · Cited by 74
Lin, X., Yang, H. Z., Su, L., Yang, Z., & Tang, X. (2018) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2018.03.024 · Cited by 73
Fundamental insights in PLGA degradation from thin film studies
Machatschek, R., & Lendlein, A. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.12.044 · Cited by 73
Qi, F., Wu, J., Yang, T., Ma, G., & Su, Z. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.018 · Cited by 69
In vitro degradation and erosion behavior of commercial PLGAs used for controlled drug delivery
Walker, J., Albert, J., Liang, D., Sun, J., Schutzman, R., Kumar, R., White, C., Beck‐Broichsitter, M., & Schwendeman, S. P. (2022) · Drug Delivery and Translational Research · doi:10.1007/s13346-022-01177-8 · Cited by 68
Analytical solutions to mathematical models of the surface and bulk erosion of solid polymers
Lyu, S., Sparer, R., & Untereker, D. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20340 · Cited by 67
Modeling the pH-dependent PLA oligomer degradation kinetics
Lazzari, S., Codari, F., Storti, G., Morbidelli, M., & Moscatelli, D. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.08.012 · Cited by 61
Nanomechanical properties of poly(lactic-co-glycolic) acid film during degradation
Shirazi, R. N., Aldabbagh, F., Erxleben, A., Rochev, Y. A., & McHugh, P. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.08.004 · Cited by 60
Kulkarni, A. S., Reiche, J., & Lendlein, A. (2007) · Surface and Interface Analysis · doi:10.1002/sia.2580 · Cited by 60
Kemme, M., Prokesch, I., & Heinzel-Wieland, R. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.06.009 · Cited by 55
Little, A., Wemyss, A. M., Haddleton, D. M., Tan, B., Sun, Z., Ji, Y., & Wan, C. (2021) · Polymers · doi:10.3390/polym13152458 · Cited by 50
Lu, Y., & Coates, G. W. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c05941 · Cited by 50
Netti, P. A., Biondi, M., & Frigione, M. (2020) · Polymers · doi:10.3390/polym12092042 · Cited by 49
Acid-base interactions in wetting
Whitesides, G. M., Biebuyck, H. A., Folkers, J. P., et al. (1991) · Journal of Adhesion Science and Technology · doi:10.1163/156856191x00828 · Cited by 47
Kumskova, N., Ermolenko, Y. V., Osipova, N., Semyonkin, A. S., Кильдеева, Н. Р., Gorshkova, M. Y., Kovalskii, A. M., Kovshova, T. S., Tarasov, V. V., Kreuter, J., et al. (2020) · Journal of Microencapsulation · doi:10.1080/02652048.2020.1729885 · Cited by 45
Huang, Y., Chen, F., Pan, Y., Chen, C., Jiang, L., & Dan, Y. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.09.044 · Cited by 42
Interdependency of protein-release completeness and polymer degradation in PLGA-based implants
Ghalanbor, Z., Körber, M., & Bodmeier, R. A. (2013) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2013.03.031 · Cited by 37
Kim, G., Gavande, V., Shaikh, V., & Lee, W.-K. (2023) · Molecules · doi:10.3390/molecules28124810 · Cited by 28
Jo, S., Roh, S., Shim, J., Yu, J. W., Jung, Y., Jang, W. Y., Seo, B., Won, Y., & Yoo, J. H. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00817 · Cited by 27
Self-citationEnhanced Degradation of Lactide-co-Glycolide Polymer with Basic Nucleophilic Drugs
D’Souza, S. S., Faraj, J. A., Dorati, R., & DeLuca, P. P. (2015) · Advances in Pharmaceutics · doi:10.1155/2015/154239 · Cited by 26
The influence of pH on the molecular degradation mechanism of PLGA
Machatschek, R., Schulz, B. W., & Lendlein, A. (2018) · MRS Advances · doi:10.1557/adv.2018.602 · Cited by 26
Kuehster, L., Jhon, Y. K., Wang, Y., Smith, W. C., Xu, X., Qin, B., Zhang, F., & Lynd, N. A. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00757 · Cited by 26
Patil, S. M., & Won, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00106 · Cited by 22
Self-citationDolui, B. K., Bhattacharya, S., & Kundu, K. K. (2008) · Journal of Solution Chemistry · doi:10.1007/s10953-008-9281-3 · Cited by 21
Spectroscopic study on water diffusion in poly(lactic acid) film
Jin, Y., Wang, W., & Su, Z. (2012) · Polymer Chemistry · doi:10.1039/c2py20259j · Cited by 21
Yoo, J. H., Viswanath, D., & Won, Y. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00637 · Cited by 16
Self-citationGuo, X., Ahmed, H., Xu, G., et al. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202417075 · Cited by 16
The dielectric constant and salt effects upon the acid hydrolysis of methyl propionate
Hockersmith, J. L., & Amis, E. S. (1953) · Analytica Chimica Acta · doi:10.1016/s0003-2670(01)80741-8 · Cited by 12
Patil, S. M., Yoo, J. H., & Won, Y. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03096 · Cited by 11
Self-citationAcid-base titrations in solvents of relatively low dielectric constant
Bos, M. J., & Dahmen, E. A. M. F. (1973) · Analytica Chimica Acta · doi:10.1016/s0003-2670(01)82358-8 · Cited by 10
Current Status of Langmuir Monolayer Degradation of Polymeric Biomaterials
Reiche, J., Kratz, K. L., Hofmann, D., & Lendlein, A. (2011) · The International Journal of Artificial Organs · doi:10.5301/ijao.2011.6401 · Cited by 10
Unified polymer erosion model for pulsatile drug delivery
Coffel, J., Gandhi, S., & Nuxoll, E. E. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.03.055 · Cited by 10
Kuehster, L., Dai, J., Thompson, A., Jhon, Y. K., Wang, Y., Qin, B., Smith, W. C., Xu, X., Zhang, F., & Lynd, N. A. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00037 · Cited by 7
Tsuji (2000) · doi:10.1002/1097-4628(20000815)77:7
(2001) · doi:10.1002/1099-0518(20010401)39:7<973::aid-pola1073>3.0.co;2-8
Cited by
Jumadi, J., Harun, W. S. W., Kadirgama, K., Samylingam, L., Aslfattahi, N., Clint, K. S., Kok, C. K., & Kiai, M. S. (2025) · BioNanoScience · doi:10.1007/s12668-025-02233-6 · Cited by 45
“Numerous investigations [23–25] have found that a 50:50 PLGA ratio degrades more rapidly than higher lactic acid ratio PLGA formulations because of the availability of more glycolic acid, which increases hydrolysis, as illustrated in Fig.”
Das, S., Seesala, V. S., Basu, B., & Mukherjee, S. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114116 · Cited by 14
Sahu, P., & Satapathy, T. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107935 · Cited by 6
siRNA Nanoparticle Delivery Strategies and Clinical Trial Advances in Tumor Therapy
Wang, P., Gong, J., Xu, Y., & Xia, X. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27073032 · Cited by 4
Schifone, M., Nunziata, G., & Rossi, F. (2026) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2026.103913 · Cited by 6
Metadata
- Authors
- Mayer, J. B., Patil, S. M., Shin, S.-H., Yoo, J., & Won, Y.-Y.
- Affiliations
- Davidson College (US)
- Biomedical Research Institute (US)
- Corresponding author
- Won, You-Yeon
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2025-06-26
- Volume
- 11
- Issue
- 7
- Pages
- 3932-3948
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W4411699928
- Cited by
- 38
- References
- 97
- Citations by year
- 2026: 33 · 2025: 5
- FWCI
- 2.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Division of Chemical, Bioengineering, Environmental, and Transport Systems (1803968, 2211843)
- Purdue University
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- poly(lactic-co-glycolic acid), polylactic acid, hydrolytic degradation, biodegradable polymers, mass transfer, monomer sequence, crystallinity, glass transition temperature, melting point, solvent dielectric constant, pH effect, stereoisomers, in vitro-in vivo correlation, controlled drug release, microparticles, degradation kinetics
- MeSH terms
- Polylactic Acid-Polyglycolic Acid Copolymer, Humans, Hydrogen-Ion Concentration, Hydrolysis, Water, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.