The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Enhanced Li–S Batteries Using Amine-Functionalized Carbon Nanotubes in the Cathode
Abstract
The rechargeable lithium-sulfur (Li-S) battery is an attractive platform for high-energy, low-cost electrochemical energy storage. Practical Li-S cells are limited by several fundamental issues, including the low conductivity of sulfur and its reduction compounds with Li and the dissolution of long-chain lithium polysulfides (LiPS) into the electrolyte. We report on an approach that allows high-performance sulfur-carbon cathodes to be designed based on tethering polyethylenimine (PEI) polymers bearing large numbers of amine groups in every molecular unit to hydroxyl- and carboxyl-functionalized multiwall carbon nanotubes. Significantly, for the first time we show by means of direct dissolution kinetics measurements that the incorporation of CNT-PEI hybrids in a sulfur cathode stabilizes the cathode by both kinetic and thermodynamic processes. Composite sulfur cathodes based the CNT-PEI hybrids display high capacity at both low and high current rates, with capacity retention rates exceeding 90%. The attractive electrochemical performance of the materials is shown by means of DFT calculations and physical analysis to originate from three principal sources: (i) specific and strong interaction between sulfur species and amine groups in PEI; (ii) an interconnected conductive CNT substrate; and (iii) the combination of physical and thermal sequestration of LiPS provided by the CNT=PEI composite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Self-citationGraphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Meyer, B. (1976) · Chemical Reviews · doi:10.1021/cr60301a003 · Cited by 996
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Self-citationZhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
Nanomaterials: Science and applications in the lithium–sulfur battery
Ma, L., Hendrickson, K. E., Wei, S., & Archer, L. A. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.011 · Cited by 359
Self-citationEnergy storage beyond the horizon: Rechargeable lithium batteries
Bruce, P. G. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.01.095 · Cited by 301
Thomson, J. W., Nagashima, K., Macdonald, P. M., & Ozin, G. A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1109997 · Cited by 300
Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell
Choi, Y. J., Jung, B. S., Lee, D. J., Jeong, J. H., Kim, K. W., Ahn, H. J., Cho, K. K., & Gu, H. B. (2007) · Physica Scripta · doi:10.1088/0031-8949/2007/t129/014 · Cited by 195
Amylopectin Wrapped Graphene Oxide/Sulfur for Improved Cyclability of Lithium–Sulfur Battery
Zhou, W., Chen, H., Yu, Y., Wang, D., Cui, Z., DiSalvo, F. J., & Abruña, H. D. (2013) · ACS Nano · doi:10.1021/nn403237b · Cited by 190
Davis, R. E., & Nakshbendi, H. F. (1962) · Journal of the American Chemical Society · doi:10.1021/ja00870a017 · Cited by 125
Kim, H. J., Bae, I.-S., Cho, S.-J., Boo, J., Lee, B.-C., Heo, J., Chung, I., & Hong, B. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-30 · Cited by 123
Cited by
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Demirer, G. S., Zhang, H., Matos, J. L., Goh, N. S., Cunningham, F. J., Sung, Y., Chang, R., Aditham, A. J., Chio, L., Cho, M.-J., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0382-5 · Cited by 629
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
Metadata
- Authors
- Ma, L., Zhuang, H. L., Wei, S., Hendrickson, K. E., Kim, M. S., Cohn, G., Hennig, R. G., & Archer, L. A.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-11
- Volume
- 10
- Issue
- 1
- Pages
- 1050-1059
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2323283711
- Cited by
- 345
- References
- 34
- FWCI
- 22.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.