The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Metal-Level Thermally Conductive yet Soft Graphene Thermal Interface Materials
Abstract
Along with the technology evolution for dense integration of high-power, high-frequency devices in electronics, the accompanying interfacial heat transfer problem leads to urgent demands for advanced thermal interface materials (TIMs) with both high through-plane thermal conductivity and good compressibility. Most metals have satisfactory thermal conductivity but relatively high compressive modulus, and soft silicones are typically thermal insulators (0.3 W m –1 K –1 ). Currently, it is a great challenge to develop a soft material with the thermal conductivity up to metal level for TIM application. This study solves this problem by constructing a graphene-based microstructure composed of mainly vertical graphene and a thin cap of horizontal graphene layers on both the top and bottom sides through a mechanical machining process to manipulate the stacked architecture of conventional graphene paper. The resultant graphene monolith has an ultrahigh through-plane thermal conductivity of 143 W m –1 K –1, exceeding that of many metals, and a low compressive modulus of 0.87 MPa, comparable to that of silicones. In the actual TIM performance measurement, the system cooling efficiency with our graphene monolith as TIM is 3 times as high as that of the state-of-the-art commercial TIM, demonstrating the superior ability to solve the interfacial heat transfer issues in electronic systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Preparation and characterization of graphene oxide paper
Dikin, D. A., Stankovich, S., Zimney, E. J., Piner, R. D., Dommett, G. H. B., Evmenenko, G., Nguyen, S. T., & Ruoff, R. S. (2007) · Nature · doi:10.1038/nature06016 · Cited by 5,594
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
The chips are down for Moore’s law
Waldrop, M. M. (2016) · Nature · doi:10.1038/530144a · Cited by 2,397
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Thermal Transport in Suspended and Supported Monolayer Graphene Grown by Chemical Vapor Deposition
Cai, W., Moore, A. L., Zhu, Y., Li, X., Chen, S., Shi, L., & Ruoff, R. S. (2010) · Nano Letters · doi:10.1021/nl9041966 · Cited by 1,262
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927
Thermal Conductivity of Polymers and Their Nanocomposites
Xu, X., Chen, J., Zhou, J., & Li, B. (2018) · Advanced Materials · doi:10.1002/adma.201705544 · Cited by 808
Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites
Ganguli, S., Roy, A. K., & Anderson, D. P. (2008) · Carbon · doi:10.1016/j.carbon.2008.02.008 · Cited by 674
Aligned Carbon Nanotube Composite Films for Thermal Management
Huang, H., Liu, C. H., Wu, Y., & Fan, S. (2005) · Advanced Materials · doi:10.1002/adma.200500467 · Cited by 621
High thermal conductivity in cubic boron arsenide crystals
Li, S., Zheng, Q., Lv, Y., Liu, X., Wang, X., Huang, P. Y., Cahill, D. G., & Lv, B. (2018) · Science · doi:10.1126/science.aat8982 · Cited by 597
Ultrahigh Thermal Conductive yet Superflexible Graphene Films
Peng, L., Xu, Z., Liu, Z., Guo, Y., Li, P., & Gao, C. (2017) · Advanced Materials · doi:10.1002/adma.201700589 · Cited by 586
Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J.-B., & Wong, C.-P. (2017) · ACS Nano · doi:10.1021/acsnano.7b02359 · Cited by 523
Self-citationEnhanced thermal conductivity and isotope effect in single-layer hexagonal boron nitride
Lindsay, L., & Broido, D. A. (2011) · Physical Review B · doi:10.1103/physrevb.84.155421 · Cited by 476
Thermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites With High Packing Density
Marconnet, A. M., Yamamoto, N., Panzer, M. A., Wardle, B. L., & Goodson, K. E. (2011) · ACS Nano · doi:10.1021/nn200847u · Cited by 474
Novel nanostructured thermal interface materials: a review
Hansson, J., Nilsson, T. M. J., Ye, L., & Liu, J. (2018) · International Materials Reviews · doi:10.1080/09506608.2017.1301014 · Cited by 441
High thermal conductivity of chain-oriented amorphous polythiophene
Singh, V., Bougher, T. L., Weathers, A., Cai, Y., Bi, K., Pettes, M. T., McMenamin, S. A., Lv, W., Resler, D. P., Gattuso, T. R., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.44 · Cited by 430
Present and future thermal interface materials for electronic devices
Razeeb, K. M., Dalton, E., Cross, G. L. W., & Robinson, A. J. (2018) · International Materials Reviews · doi:10.1080/09506608.2017.1296605 · Cited by 422
Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite
Im, H., & Kim, J. (2012) · Carbon · doi:10.1016/j.carbon.2012.07.029 · Cited by 407
Shen, X., Wang, Z., Wu, Y., Liu, X., He, Y.-B., & Kim, J.-K. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00722 · Cited by 382
Giri, A., & Hopkins, P. E. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903857 · Cited by 370
Yoon, Y., Lee, K., Kwon, S., Seo, S., Yoo, H., Kim, S., Shin, Y., Park, Y., Kim, D., Choi, J.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn500150j · Cited by 341
Liang, Q., Yao, X., Wang, W., Liu, Y., & Wong, C. P. (2011) · ACS Nano · doi:10.1021/nn200181e · Cited by 320
Self-citationUetani, K., Ata, S., Tomonoh, S., Yamada, T., Yumura, M., & Hata, K. (2014) · Advanced Materials · doi:10.1002/adma.201401736 · Cited by 315
Zhang, F., Feng, Y., Qin, M., Gao, L., Li, Z., Zhao, F., Zhang, Z., Lv, F., & Feng, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901383 · Cited by 308
Thermal Interface Materials - A Review of the State of the Art
Sarvar, F., Whalley, D., & Conway, P. (2006) · 2006 1st Electronic Systemintegration Technology Conference · doi:10.1109/estc.2006.280178 · Cited by 278
An Anisotropic Etching Effect in the Graphene Basal Plane
Yang, R., Zhang, L., Wang, Y., Shi, Z., Shi, D., Gao, H., Wang, E., & Zhang, G. (2010) · Advanced Materials · doi:10.1002/adma.201000618 · Cited by 274
Self-citationZhang, Y., Zhang, H. L., Wu, J. H., & Wang, X. T. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.09.028 · Cited by 261
Self-citationDai, W., Lv, L., Lu, J., Hou, H., Yan, Q., Alam, F. E., Li, Y., Zeng, X., Yu, J., Wei, Q., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b07337 · Cited by 259
Self-citationMechanically robust honeycomb graphene aerogel multifunctional polymer composites
Zhang, Q., Xu, X., Li, H., Xiong, G., Hu, H., & Fisher, T. S. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.102 · Cited by 216
High-Density 3D-Boron Nitride and 3D-Graphene for High-Performance Nano–Thermal Interface Material
Loeblein, M., Tsang, S. H., Pawlik, M., Phua, E. J. R., Yong, H., Zhang, X. W., Gan, C. L., & Teo, E. H. T. (2017) · ACS Nano · doi:10.1021/acsnano.6b08218 · Cited by 200
Photopatternable Conductive PDMS Materials for Microfabrication
Cong, H., & Pan, T. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701437 · Cited by 191
Lin, W., Moon, K., & Wong, C. P. (2009) · Advanced Materials · doi:10.1002/adma.200803548 · Cited by 190
Self-citationTang, B., Hu, G., Gao, H., & Hai, L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.141 · Cited by 175
Zhang, Y.-F., Han, D., Zhao, Y.-H., & Bai, S.-L. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.051 · Cited by 175
Jeong, S. H., Chen, S., Huo, J., Gamstedt, E. K., Liu, J., Zhang, S., Zhang, Z.-B., Hjort, K., & Wu, Z. (2015) · Scientific Reports · doi:10.1038/srep18257 · Cited by 154
Otiaba, K. C., Ekere, N. N., Bhatti, R., Mallik, S., Alam, M. O., & Amalu, E. H. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.05.001 · Cited by 148
Ralphs, M., Kemme, N., Vartak, P. B., Joseph, E., Tipnis, S., Turnage, S. A., Solanki, K. N., Wang, R. Y., & Rykaczewski, K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15814 · Cited by 131
Cure-dependent Viscoelastic Poisson’s Ratio of Epoxy
O’Brien, D. J., Sottos, N. R., & White, S. R. (2007) · Experimental Mechanics · doi:10.1007/s11340-006-9013-9 · Cited by 110
Hirth, G., & Tullis, J. (1989) · Journal of Geophysical Research Atmospheres · doi:10.1029/jb094ib12p17825 · Cited by 107
Nanowire-filled polymer composites with ultrahigh thermal conductivity
Balachander, N., Seshadri, I. P., Mehta, R. J., Schadler, L. S., Borca-Tasciuc, T., Keblinski, P., & Ramanath, G. (2013) · Applied Physics Letters · doi:10.1063/1.4793419 · Cited by 94
Dense Vertically Aligned Copper Nanowire Composites as High Performance Thermal Interface Materials
Barako, M. T., Isaacson, S. G., Lian, F., Pop, E., Dauskardt, R. H., Goodson, K. E., & Tice, J. B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12313 · Cited by 87
Copper Nanowire‐Filled Soft Elastomer Composites for Applications as Thermal Interface Materials
Bhanushali, S., Ghosh, P. C., Simon, G. P., & Cheng, W. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700387 · Cited by 78
Zhang, W., Kong, Q., Tao, Z., Wei, J., Xie, L., Cui, X., & Chen, C. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900147 · Cited by 76
Lin, W. J., Shang, J., Gu, W., & Wong, C. P. (2011) · Carbon · doi:10.1016/j.carbon.2011.11.038 · Cited by 74
Self-citationWafer-Scale Transfer of Vertically Aligned Carbon Nanotube Arrays
Wang, M., Li, T., Yao, Y., Lu, H., Li, Q., Chen, M., & Li, Q. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511373g · Cited by 67
Self-citationTaphouse, J. H., Smith, O., Marder, S., & Cola, B. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301714 · Cited by 60
Infrared Microscopy Thermal Characterization of Opposing Carbon Nanotube Arrays
Hu, X., Panzer, M. A., & Goodson, K. E. (2006) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2401202 · Cited by 39
Double-Sided Transferred Carbon Nanotube Arrays for Improved Thermal Interface Materials
McNamara, A. J., Joshi, Y. K., Zhang, Z. M., et al. (2015) · Journal of Electronic Packaging · doi:10.1115/1.4030802 · Cited by 11
Cited by
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Guo, H., Zhao, H., Niu, H., Ren, Y., Fang, H., Fang, X., Lv, R., Maqbool, M., & Bai, S. (2021) · ACS Nano · doi:10.1021/acsnano.0c10768 · Cited by 287
Metadata
- Authors
- Dai, W., Ma, T., Yan, Q., Gao, J., Tan, X., Lv, L., Hou, H., Wei, Q., Yu, J., Wu, J., Yao, Y., Du, S., Sun, R., Jiang, N., Wang, Y., Kong, J., Wong, C., Maruyama, S., & Lin, C.-T.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-09-24
- Volume
- 13
- Issue
- 10
- Pages
- 11561-11571
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2975828831
- Cited by
- 348
- References
- 51
- FWCI
- 12.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.