The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Blends of Poly-(ε-caprolactone) and Polysaccharides in Tissue Engineering Applications
Abstract
Bioartificial blends of poly-(epsilon-caprolactone) (PCL) with a polysaccharide (starch, S; dextran, D; or gellan, G) (PCL/S, PCL/D, PCL/G 90.9/9.1 wt ratio) were prepared by a solution-precipitation technique and widely characterized by differential scanning calorimetry analysis (DSC), Fourier transform infrared-attenuated total reflectance spectroscopy (FTIR-ATR), optical microscopy (OM), wide-angle X-ray diffraction analysis (WAXD), and thermogravimetry (TGA). DSC showed that the polysaccharide reduced the crystallinity of PCL and had a nucleation effect, which was also confirmed by OM analysis. Hoffman-Weeks analysis was performed on PCL and blend samples allowing calculation of their equilibrium melting temperatures (). WAXD showed that the crystalline unit cell type was the same for PCL and blends. FTIR-ATR did not evidence interactions between blend components. Thermal stability was affected by the type of polysaccharide. Microparticles (<125 microm) were produced from blends by cryogenical milling and characterized by scanning electron microscopy analysis (SEM). Selective laser sintering (SLS), a new rapid prototyping technology for scaffold fabrication, was applied to sinter blend microparticles according to a PC-designed two-dimensional geometry (strips and 2 x 2 mm(2) square-meshed grids). The optimal experimental conditions for sintering were established and laser beam parameters (beam speed, BS, and power, P) were found for each blend composition. Morphology of sintered objects was analyzed by SEM and found to be dependent on the morphology of the sintered powders. Sintered samples were analyzed by chemical imaging (CI), FTIR-ATR, DSC, and contact angle analysis. No evidence of the occurrence of degradation phenomena was found by FTIR-ATR for sintered samples, whereas DSC parameters of PCL and blends showed changes which could be attributed to some molecular weight decrease of PCL during sintering. CI of sintered samples showed that the polysaccharide phase was homogeneously dispersed within the PCL matrix, with the only exception being the PCL/D blend. The contact angle analysis showed that all samples were hydrophilic. Fibroblasts were then seeded on scaffolds to evaluate the rate and the extent of cell adhesion and the effect of the polysaccharides (S, D, G) on the bioactivity of the PCL-based blends.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Phillips, G. O., & Williams, P. A. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845695873 · Cited by 2,105
Principles of Tissue Engineering
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07193-4 · Cited by 1,906
The Basic Science of Gene Therapy
Mulligan, R. C. (1993) · Science · doi:10.1126/science.8493530 · Cited by 1,741
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
Agrawal, C. M., & Ray, R. B. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<141::aid-jbm1000>3.0.co;2-j · Cited by 1,052
Glycosaminoglycans and Their Binding to Biological Macromolecules
Lindahl, U., & Hook, M. (1978) · Annual Review of Biochemistry · doi:10.1146/annurev.bi.47.070178.002125 · Cited by 840
Biodegradable polymers as drug delivery systems
(1992) · Comparative Biochemistry and Physiology Part A: Physiology · doi:10.1016/0300-9629(92)90663-b · Cited by 779
Biodegradable polymers as drug delivery systems
(1991) · European Journal of Medicinal Chemistry · doi:10.1016/0223-5234(91)90162-g · Cited by 514
Cited by
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Electrospun poly(ɛ-caprolactone)/gelatin nanofibrous scaffolds for nerve tissue engineering
Ghasemi-Mobarakeh, L., Prabhakaran, M. P., Morshed, M., Nasr-Esfahani, M.-H., & Ramakrishna, S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.007 · Cited by 1,152
Mano, J. F., Silva, G. A., Azevedo, H. S., Malafaya, P. B., Sousa, R. A., Silva, S. S., Boesel, L. F., Oliveira, J. M., Santos, T. C., Marques, A. P., et al. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.0220 · Cited by 1,140
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
A review on biodegradable polymeric materials for bone tissue engineering applications
Sabir, M. I., Xu, X., & Li, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3770-7 · Cited by 645
Future Prospects for Scaffolding Methods and Biomaterials in Skin Tissue Engineering: A Review
Chaudhari, A., Vig, K., Baganizi, D., Sahu, R., Dixit, S., Dennis, V., Singh, S., & Pillai, S. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121974 · Cited by 604
Eshraghi, S., & Das, S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.002 · Cited by 524
PVA-based hydrogels for tissue engineering: A review
Kumar, A., & Han, S. S. (2017) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2016.1190930 · Cited by 496
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
(2018) · PubMed Central · Cited by 365
Functionalizing PLGA and PLGA Derivatives for Drug Delivery and Tissue Regeneration Applications
Martins, C., Sousa, F., Araújo, F., & Sarmento, B. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701035 · Cited by 362
Advances in additive manufacturing for bone tissue engineering scaffolds
Moreno Madrid, A. P., Vrech, S. M., Sanchez, M. A., & Rodriguez, A. P. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.03.037 · Cited by 307
Genipin-crosslinked chitosan/gelatin blends for biomedical applications
Chiono, V., Pulieri, E., Vozzi, G., Ciardelli, G., Ahluwalia, A., & Giusti, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3212-5 · Cited by 297
Self-citationPrasadh, S., & Wong, R. C. W. (2018) · Oral Science International · doi:10.1016/s1348-8643(18)30005-3 · Cited by 283
Polysaccharide biomaterials for drug delivery and regenerative engineering
Shelke, N. B., James, R., Laurencin, C. T., & Kumbar, S. G. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3266 · Cited by 281
Dong, L., Wang, S.-J., Zhao, X.-R., Zhu, Y.-F., & Yu, J.-K. (2017) · Scientific Reports · doi:10.1038/s41598-017-13838-7 · Cited by 268
Hajiali, F., Tajbakhsh, S., & Shojaei, A. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1332640 · Cited by 267
Occurrence, production, and applications of gellan: current state and perspectives
Fialho, A. M., Moreira, L. M., Granja, A. T., Popescu, A. O., Hoffmann, K., & Sá-Correia, I. (2008) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-008-1496-0 · Cited by 266
Materials for Peripheral Nerve Regeneration
Ciardelli, G., & Chiono, V. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200500151 · Cited by 255
Self-citationWang, S., Gu, R., Wang, F., Zhao, X., Yang, F., Xu, Y., Yan, F., Zhu, Y., Xia, D., & Liu, Y. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100202 · Cited by 115
Garkhal, K., Verma, S., Jonnalagadda, S., & Kumar, N. (2007) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22031 · Cited by 110
Fabrication of a Biodegradable Implant with Tunable Characteristics for Bone Implant Applications
Manavitehrani, I., Fathi, A., Wang, Y., Maitz, P. K., Mirmohseni, F., Cheng, T. L., Peacock, L., Little, D. G., Schindeler, A., & Dehghani, F. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00078 · Cited by 55
Nanostructure controlled anti-cancer drug delivery using poly(ε-caprolactone) based nanohybrids
Singh, N. K., Singh, S. K., Dash, D., Das Purkayastha, B. P., Roy, J. K., & Maiti, P. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32340k · Cited by 49
Fabrication and characterization of polycaprolactone-based green materials for drug delivery
Kurakula, M., Rao, G. S. N. K., & Yadav, K. S. (2021) · Applications of Advanced Green Materials · doi:10.1016/b978-0-12-820484-9.00016-7 · Cited by 34
Kim, J. K., Basavaraja, C., Umashankar, M., & Huh, D. S. (2016) · Polymer · doi:10.1016/j.polymer.2016.01.052 · Cited by 11
Metadata
- Authors
- Ciardelli, G., Chiono, V., Vozzi, G., Pracella, M., Ahluwalia, A., Barbani, N., Cristallini, C., & Giusti, P.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-27
- Volume
- 6
- Issue
- 4
- Pages
- 1961-1976
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1999940864
- Cited by
- 310
- References
- 35
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.