The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Battery Separators
Abstract
The ideal battery separator would be infinitesimally thin, offer no resistance to ionic transport in electrolytes, provide infinite resistance to electronic conductivity for isolation of electrodes, be highly tortuous to prevent dendritic growths, and be inert to chemical reactions. Unfortunately, in the real world the ideal case does not exist. Real world separators are electronically insulating membranes whose ionic resistivity is brought to the desired range by manipulating the membranes thickness and porosity. It is clear that no single separator satisfies all the needs of battery designers, and compromises have to be made. It is ultimately the application that decides which separator is most suitable. We hope that this paper will be a useful tool and will help the battery manufacturers in selecting the most appropriate separators for their batteries and respective applications. The information provided is purely technical and does not include other very important parameters, such as cost of production, availability, and long-term stability. There has been a continued demand for thinner battery separators to increase battery power and capacity. This has been especially true for lithiumion batteries used in portable electronics. However, it is very important to ensure the continued safety of batteries, and this is where the role of the separator is greatest. Thus, it is essential to optimize all the components of battery to improve the performance while maintaining the safety of these cells. Separator manufacturers should work along with the battery manufacturers to create the next generation of batteries with increased reliability and performance, but always keeping safety in mind. This paper has attempted to present a comprehensive review of literature on separators used in various batteries. It is evident that a wide variety of separators are available and that they are critical components in batteries. In many cases, the separator is one of the major factors limiting the life and/or performance of batteries. Consequently, development of new improved separators would be very beneficial for the advanced high capacity batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Review of gel-type polymer electrolytes for lithium-ion batteries
Song, J. Y., Wang, Y. Y., & Wan, C. C. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00193-1 · Cited by 1,491
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
Powder Surface Area and Porosity
Lowell, S., & Shields, J. E. (1991) · Springer eBooks · doi:10.1007/978-94-015-7955-1 · Cited by 1,100
Advances in Lithium-Ion Batteries
(2002) · Springer eBooks · doi:10.1007/b113788 · Cited by 1,041
(1998) · Wiley eBooks · doi:10.1002/9783527611676 · Cited by 972
Polymer solid electrolytes - an overview
Armand, M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90083-8 · Cited by 871
Cited by
Items 101–149 of 149
Two-Dimensional Materials to Address the Lithium Battery Challenges
Rojaee, R., & Shahbazian-Yassar, R. (2020) · ACS Nano · doi:10.1021/acsnano.9b08396 · Cited by 344
Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries
Zhang, L., Wang, Y., Niu, Z., & Chen, J. (2019) · Carbon · doi:10.1016/j.carbon.2018.09.067 · Cited by 343
Recent progress of separators in lithium-sulfur batteries
Li, C., Liu, R., Xiao, Y., Cao, F., & Zhang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.034 · Cited by 343
The Recycling of Spent Lithium-Ion Batteries: a Review of Current Processes and Technologies
Li, L., Zhang, X., Li, M., Chen, R., Wu, F., Amine, K., & Lu, J. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0012-1 · Cited by 337
Wang, R., Wang, L., Liu, R., Li, X., Wu, Y., & Ran, F. (2024) · ACS Nano · doi:10.1021/acsnano.3c08712 · Cited by 336
Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications
Zhou, X., Zhou, Y., Yu, L., Qi, L., Oh, K.-S., Hu, P., Lee, S.-Y., & Chen, C. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00551h · Cited by 333
Costa, C. M., Silva, M. M., & Lanceros-Méndez, S. (2013) · RSC Advances · doi:10.1039/c3ra40732b · Cited by 330
Quantifying the factors limiting rate performance in battery electrodes
Tian, R., Park, S.-H., King, P. J., Cunningham, G., Coelho, J., Nicolosi, V., & Coleman, J. N. (2019) · Nature Communications · doi:10.1038/s41467-019-09792-9 · Cited by 326
Chun, S.-J., Choi, E.-S., Lee, E.-H., Kim, J. H., Lee, S.-Y., & Lee, S.-Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32415f · Cited by 322
Patel, K., Chikkali, S. H., & Sivaram, S. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101290 · Cited by 320
Dai, J., Shi, C., Li, C., Shen, X., Peng, L., Wu, D., Sun, D., Zhang, P., & Zhao, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01219a · Cited by 319
Advanced materials for zinc-based flow battery: development and challenge
Yuan, Z., Yin, Y., Xie, C., Zhang, H., Yao, Y., & Li, X. (2019) · Advanced Materials · doi:10.1002/adma.201902025 · Cited by 318
Covalent Organic Frameworks for Batteries
Zhu, D., Xu, G., Barnes, M., Li, Y., Tseng, C., Zhang, Z., Zhang, J., Zhu, Y., Khalil, S., Rahman, M. M., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100505 · Cited by 318
Self-citationCellulose-based Li-ion batteries: a review
Jabbour, L., Bongiovanni, R., Chaussy, D., Gerbaldi, C., & Beneventi, D. (2013) · Cellulose · doi:10.1007/s10570-013-9973-8 · Cited by 314
Bifunctional electrocatalysts for Zn–air batteries: recent developments and future perspectives
Ren, S., Duan, X., Liang, S., Zhang, M., & Zheng, H. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta14231b · Cited by 314
Applications of electrospun nanofibers
Fang, J., Niu, H., Lin, T., & Wang, X. (2008) · Science Bulletin · doi:10.1007/s11434-008-0319-0 · Cited by 313
Biomass-derived materials for electrochemical energy storages
Zhang, L., Liu, Z., Cui, G., & Chen, L. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.003 · Cited by 313
Huang, Y., Wang, Y., Tang, C., Wang, J., Zhang, Q., Wang, Y., & Zhang, J. (2019) · Advanced Materials · doi:10.1002/adma.201803800 · Cited by 310
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 306
Single-Ion Block Copoly(ionic liquid)s as Electrolytes for All-Solid State Lithium Batteries
Porcarelli, L., Shaplov, A. S., Salsamendi, M., Nair, J. R., Vygodskii, Y. S., Mecerreyes, D., & Gerbaldi, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01973 · Cited by 302
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Advances in Natural Biopolymer‐Based Electrolytes and Separators for Battery Applications
Lizundia, E., & Kundu, D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005646 · Cited by 295
Liu, K., Zhuo, D., Lee, H., Liu, W., Lin, D., Lu, Y., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201603987 · Cited by 288
Rational design on separators and liquid electrolytes for safer lithium-ion batteries
Yuan, M., & Liu, K. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.08.008 · Cited by 287
Chang, H. J., Ilott, A. J., Trease, N. M., Mohammadi, M., Jerschow, A., & Grey, C. P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09385 · Cited by 285
Shin, W.-K., Cho, J., Kannan, A. G., Lee, Y.-S., & Kim, D.-W. (2016) · Scientific Reports · doi:10.1038/srep26332 · Cited by 283
Huang, Q., Chen, J., Liu, M., Huang, H., Zhang, X., & Wei, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124019 · Cited by 280
Tortuosity in electrochemical devices: a review of calculation approaches
Tjaden, B., Brett, D. J. L., & Shearing, P. R. (2018) · International Materials Reviews · doi:10.1080/09506608.2016.1249995 · Cited by 278
Choi, J.-A., Kim, S. H., & Kim, D.-W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.020 · Cited by 276
Shi, C., Zhang, P., Chen, L., Yang, P., & Zhao, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.142 · Cited by 276
Jeong, H.-S., & Lee, S.-Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.037 · Cited by 274
Recent Advances in Materials and Design of Electrochemically Rechargeable Zinc–Air Batteries
Chen, X., Zhou, Z., Karahan, H. E., Shao, Q., Wei, L., & Chen, Y. (2018) · Small · doi:10.1002/smll.201801929 · Cited by 273
A review on recycling of spent lithium-ion batteries
Dobó, Z., Dinh, T., & Kulcsár, T. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.05.264 · Cited by 273
Polymer nanocomposite meshes for flexible electronic devices
Gong, M., Zhang, L., & Wan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101279 · Cited by 270
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Gendy, E. A., Ifthikar, J., Ali, J., Oyekunle, D. T., Elkhlifia, Z., Shahib, I. I., Khodair, A. I., & Chen, Z. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105687 · Cited by 266
Al Zoubi, W., Kamil, M. P., Fatimah, S., Nashrah, N., & Ko, Y. G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100663 · Cited by 265
Materials for Rechargeable Lithium-Ion Batteries
Hayner, C. M., Zhao, X., & Kung, H. H. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081024 · Cited by 263
The interplay between solid electrolyte interface (SEI) and dendritic lithium growth
Wu, B., Lochala, J., Taverne, T., & Xiao, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.005 · Cited by 262
Transparent lithium-ion batteries
Yang, Y., Jeong, S., Hu, L., Wu, H., Lee, S. W., & Cui, Y. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1102873108 · Cited by 259
The significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
Gel polymer electrolytes for lithium ion batteries: Fabrication, characterization and performance
Liang, S., Yan, W., Wu, X., Zhang, Y., Zhu, Y., Wang, H., & Wu, Y. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2017.12.023 · Cited by 254
Safer Lithium‐Ion Batteries from the Separator Aspect: Development and Future Perspectives
Liu, Z., Jiang, Y., Hu, Q., Guo, S., Yu, L., Li, Q., Liu, Q., & Hu, X. (2021) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12129 · Cited by 253
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
The role of mechanically induced separator creep in lithium-ion battery capacity fade
Peabody, C., & Arnold, C. B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.023 · Cited by 237
Materials and processing for lithium-ion batteries
Daniel, C. (2008) · JOM · doi:10.1007/s11837-008-0116-x · Cited by 192
Ion conducting membranes for aqueous flow battery systems
Yuan, Z., Zhang, H., & Li, X. (2018) · Chemical Communications · doi:10.1039/c8cc03058h · Cited by 108
Advances, challenges, and environmental impacts in metal–air battery electrolytes
Salado, M., & Lizundia, E. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.101064 · Cited by 108
Brand, M., Glaser, S., Geder, J., Menacher, S., Obpacher, S., Jossen, A., & Quinger, D. (2013) · 2013 World Electric Vehicle Symposium and Exhibition (EVS27) · doi:10.1109/evs.2013.6914893 · Cited by 59
Metadata
- Authors
- Arora, P., & Zhang, Z. (.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-01
- Volume
- 104
- Issue
- 10
- Pages
- 4419-4462
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4211096336
- Cited by
- 2,175
- References
- 53
- FWCI
- 0.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.