The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Battery Separators
Abstract
The ideal battery separator would be infinitesimally thin, offer no resistance to ionic transport in electrolytes, provide infinite resistance to electronic conductivity for isolation of electrodes, be highly tortuous to prevent dendritic growths, and be inert to chemical reactions. Unfortunately, in the real world the ideal case does not exist. Real world separators are electronically insulating membranes whose ionic resistivity is brought to the desired range by manipulating the membranes thickness and porosity. It is clear that no single separator satisfies all the needs of battery designers, and compromises have to be made. It is ultimately the application that decides which separator is most suitable. We hope that this paper will be a useful tool and will help the battery manufacturers in selecting the most appropriate separators for their batteries and respective applications. The information provided is purely technical and does not include other very important parameters, such as cost of production, availability, and long-term stability. There has been a continued demand for thinner battery separators to increase battery power and capacity. This has been especially true for lithiumion batteries used in portable electronics. However, it is very important to ensure the continued safety of batteries, and this is where the role of the separator is greatest. Thus, it is essential to optimize all the components of battery to improve the performance while maintaining the safety of these cells. Separator manufacturers should work along with the battery manufacturers to create the next generation of batteries with increased reliability and performance, but always keeping safety in mind. This paper has attempted to present a comprehensive review of literature on separators used in various batteries. It is evident that a wide variety of separators are available and that they are critical components in batteries. In many cases, the separator is one of the major factors limiting the life and/or performance of batteries. Consequently, development of new improved separators would be very beneficial for the advanced high capacity batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Review of gel-type polymer electrolytes for lithium-ion batteries
Song, J. Y., Wang, Y. Y., & Wan, C. C. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00193-1 · Cited by 1,491
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
Powder Surface Area and Porosity
Lowell, S., & Shields, J. E. (1991) · Springer eBooks · doi:10.1007/978-94-015-7955-1 · Cited by 1,100
Advances in Lithium-Ion Batteries
(2002) · Springer eBooks · doi:10.1007/b113788 · Cited by 1,041
(1998) · Wiley eBooks · doi:10.1002/9783527611676 · Cited by 972
Polymer solid electrolytes - an overview
Armand, M. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90083-8 · Cited by 871
Cited by
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Maximizing the right stuff: The trade-off between membrane permeability and selectivity
Park, H. B., Kamcev, J., Robeson, L. M., Elimelech, M., & Freeman, B. D. (2017) · Science · doi:10.1126/science.aab0530 · Cited by 3,344
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Recent advances in zinc–air batteries
Li, Y., & Dai, H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00015c · Cited by 2,315
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
A review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745
Application and modification of poly(vinylidene fluoride) (PVDF) membranes – A review
Kang, G.-D., & Cao, Y.-M. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.03.055 · Cited by 1,679
A review on the separators of liquid electrolyte Li-ion batteries
Zhang, S. S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.065 · Cited by 1,671
Materials for lithium-ion battery safety
Liu, K., Liu, Y., Lin, D., Pei, A., & Cui, Y. (2018) · Science Advances · doi:10.1126/sciadv.aas9820 · Cited by 1,625
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
Electrically Rechargeable Zinc–Air Batteries: Progress, Challenges, and Perspectives
Fu, J., Cano, Z. P., Park, M. G., Yu, A., Fowler, M., & Chen, Z. (2017) · Advanced Materials · doi:10.1002/adma.201604685 · Cited by 1,594
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Lee, H., Yanilmaz, M., Toprakci, O., Fu, K., & Zhang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01432d · Cited by 1,467
Recent advances in rechargeable battery materials: a chemist’s perspective
Palacín, M. R. (2009) · Chemical Society Reviews · doi:10.1039/b820555h · Cited by 1,423
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Metal–organic frameworks as platforms for clean energy
Li, S.-L., & Xu, Q. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40507a · Cited by 970
Progress in redox flow batteries, remaining challenges and their applications in energy storage
Leung, P., Li, X., Ponce de León, C., Berlouis, L., Low, C. T. J., & Walsh, F. C. (2012) · RSC Advances · doi:10.1039/c2ra21342g · Cited by 925
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
Li plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Safer Electrolytes for Lithium‐Ion Batteries: State of the Art and Perspectives
Kalhoff, J., Eshetu, G. G., Bresser, D., & Passerini, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500284 · Cited by 877
Current Li-Ion Battery Technologies in Electric Vehicles and Opportunities for Advancements
Miao, Y., Hynan, P., von Jouanne, A., & Yokochi, A. (2019) · Energies · doi:10.3390/en12061074 · Cited by 874
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Metal organic frameworks for electrochemical applications
Morozan, A., & Jaouen, F. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22989g · Cited by 870
Advanced Architectures and Relatives of Air Electrodes in Zn–Air Batteries
Pan, J., Xu, Y. Y., Yang, H., Dong, Z., Liu, H., & Xia, B. Y. (2018) · Advanced Science · doi:10.1002/advs.201700691 · Cited by 848
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Characterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Voltage issue of aqueous rechargeable metal-ion batteries
Liu, Z., Huang, Y., Huang, Y., Yang, Q., Li, X., Huang, Z., & Zhi, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00131j · Cited by 783
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
Landesfeind, J., Hattendorff, J., Ehrl, A., Wall, W. A., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1141607jes · Cited by 731
Non-aqueous electrolytes for sodium-ion batteries
Ponrouch, A., Monti, D., Boschin, A., Steen, B., Johansson, P., & Palacín, M. R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04428b · Cited by 731
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Mussel‐Inspired Polydopamine‐Treated Polyethylene Separators for High‐Power Li‐Ion Batteries
Ryou, M., Lee, Y. M., Park, J., & Choi, J. W. (2011) · Advanced Materials · doi:10.1002/adma.201100303 · Cited by 721
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501082 · Cited by 636
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Recycling and environmental issues of lithium-ion batteries: Advances, challenges and opportunities
Costa, C. M., Barbosa, J. C., Gonçalves, R., Castro, H., Campo, F. J. D., & Lanceros-Méndez, S. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.02.032 · Cited by 611
A review of safety strategies of a Li-ion battery
Chombo, P. V., & Laoonual, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228649 · Cited by 596
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Materials Design for Rechargeable Metal-Air Batteries
Wang, H.-F., & Xu, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.008 · Cited by 580
Emerging Applications of Atomic Layer Deposition for Lithium‐Ion Battery Studies
Meng, X., Yang, X., & Sun, X. (2012) · Advanced Materials · doi:10.1002/adma.201200397 · Cited by 573
Making Li‐Air Batteries Rechargeable: Material Challenges
Shao, Y., Ding, F., Xiao, J., Zhang, J., Xu, W., Park, S., Zhang, J., Wang, Y., & Liu, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200688 · Cited by 541
Rechargeable zinc–air batteries: a promising way to green energy
Gu, P., Zheng, M., Zhao, Q., Xiao, X., Xue, H., & Pang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01693j · Cited by 541
An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery
Ren, D., Feng, X., Lu, L., Ouyang, M., Zheng, S., Li, J., & He, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.035 · Cited by 506
Efficient electrocatalytic CO2 reduction on a three-phase interface
Li, J., Chen, G., Zhu, Y., Liang, Z., Pei, A., Wu, C.-L., Wang, H., Lee, H. R., Liu, K., Chu, S., et al. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0108-3 · Cited by 483
A review of safety-focused mechanical modeling of commercial lithium-ion batteries
Zhu, J., Wierzbicki, T., & Li, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.034 · Cited by 482
Porous membranes in secondary battery technologies
Lu, W., Yuan, Z., Zhao, Y., Zhang, H., Zhang, H., & Li, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00823b · Cited by 479
Degradation mechanisms in Li-ion batteries: a state-of-the-art review
Kabir, M. M., & Demirocak, D. E. (2017) · International Journal of Energy Research · doi:10.1002/er.3762 · Cited by 471
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Technologies for extending zinc–air battery’s cyclelife: A review
Pei, P., Wang, K., & Ma, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.095 · Cited by 463
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Feng, X., He, X., Ouyang, M., Lu, L., Wu, P., Kulp, C., & Prasser, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.118 · Cited by 458
Aluminium-ion batteries: developments and challenges
Das, S. K., Mahapatra, S., & Lahan, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00228a · Cited by 458
Wiers, B. M., Foo, M.-L., Balsara, N. P., & Long, J. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205827z · Cited by 454
Lithium‐Ion Conducting Electrolyte Salts for Lithium Batteries
Aravindan, V., Gnanaraj, J., Madhavi, S., & Liu, H. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201101486 · Cited by 452
Electrospun polyimide nanofibers and their applications
Ding, Y., Hou, H., Zhao, Y., Zhu, Z., & Fong, H. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.06.006 · Cited by 452
Advancing energy storage: The future trajectory of lithium-ion battery technologies
Hasan, M. M., Haque, R., Jahirul, M. I., Rasul, M. G., Fattah, I. M. R., Hassan, N. M. S., & Mofijur, M. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116511 · Cited by 446
All‐Solid‐State Cable‐Type Flexible Zinc–Air Battery
Park, J., Park, M., Nam, G., Lee, J., & Cho, J. (2015) · Advanced Materials · doi:10.1002/adma.201404639 · Cited by 442
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Materials and membrane technologies for water and energy sustainability
Le, N. L., & Nunes, S. P. (2016) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2016.02.001 · Cited by 432
Zhang, J., Zang, X., Wen, H., Dong, T., Chai, J., Li, Y., Chen, B., Zhao, J., Dong, S., Ma, J., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10066j · Cited by 430
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Du, X., Zhang, Z., Liu, W., & Deng, Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.001 · Cited by 426
Self-citationRecent development of membrane for vanadium redox flow battery applications: A review
Shi, Y., Eze, C., Xiong, B., He, W., Zhang, H., Lim, T. M., Ukil, A., & Zhao, J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.087 · Cited by 423
Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries
Zhang, H., Zhao, H., Khan, M. A., Zou, W., Xu, J., Zhang, L., & Zhang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05336g · Cited by 416
Towards High Performance Li–S Batteries via Sulfonate‐Rich COF‐Modified Separator
Xu, J., An, S., Song, X., Cao, Y., Wang, N., Qiu, X., Zhang, Y., Chen, J., Duan, X., Huang, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105178 · Cited by 414
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Materials processing for lithium-ion batteries
Li, J., Daniel, C., & Wood, D. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.001 · Cited by 402
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
High temperature electrical energy storage: advances, challenges, and frontiers
Lin, X., Salari, M., Arava, L. M. R., Ajayan, P. M., & Grinstaff, M. W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00012f · Cited by 401
Li, H., Wu, D., Wu, J., Dong, L., Zhu, Y., & Hu, X. (2017) · Advanced Materials · doi:10.1002/adma.201703548 · Cited by 401
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Flexible and stretchable power sources for wearable electronics
Zamarayeva, A. M., Ostfeld, A. E., Wang, M., Duey, J. K., Deckman, I., Lechêne, B. P., Davies, G., Steingart, D. A., & Arias, A. C. (2017) · Science Advances · doi:10.1126/sciadv.1602051 · Cited by 400
Jiao, S., Zheng, J., Li, Q., Li, X., Engelhard, M. H., Cao, R., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2017.10.007 · Cited by 386
Super Soft All-Ethylene Oxide Polymer Electrolyte for Safe All-Solid Lithium Batteries
Porcarelli, L., Gerbaldi, C., Bella, F., & Nair, J. R. (2016) · Scientific Reports · doi:10.1038/srep19892 · Cited by 383
Separators for Lithium‐Ion Batteries: A Review on the Production Processes and Recent Developments
Deimede, V., & Elmasides, C. (2015) · Energy Technology · doi:10.1002/ente.201402215 · Cited by 382
A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries
Hendricks, C., Williard, N., Mathew, S., & Pecht, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.100 · Cited by 381
Mitigation strategies for Li-ion battery thermal runaway: A review
Xu, B., Lee, J., Kwon, D., Kong, L., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111437 · Cited by 377
Kong, W., Yan, L., Luo, Y., Wang, D., Jiang, K., Li, Q., Fan, S., & Wang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606663 · Cited by 376
Du, H., Wang, Y., Kang, Y., Zhao, Y., Tian, Y., Wang, X., Tan, Y., Liang, Z., Wozny, J., Li, T., et al. (2024) · Advanced Materials · doi:10.1002/adma.202401482 · Cited by 376
Heteroatom-doped carbon catalysts for zinc–air batteries: progress, mechanism, and opportunities
Zhu, X., Hu, C., Amal, R., Dai, L., & Lu, X. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02800b · Cited by 374
Costa, C. M., Lee, Y.-H., Kim, J.-H., Lee, S.-Y., & Lanceros-Méndez, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.024 · Cited by 369
Zhang, J., Liu, Z., Kong, Q., Zhang, C., Pang, S., Yue, L., Wang, X., Yao, J., & Cui, G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302290n · Cited by 368
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Liu, K., Liu, W., Qiu, Y., Kong, B., Sun, Y., Chen, Z., Zhuo, D., Lin, D., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1601978 · Cited by 354
Polymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Metadata
- Authors
- Arora, P., & Zhang, Z. (.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-01
- Volume
- 104
- Issue
- 10
- Pages
- 4419-4462
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W4211096336
- Cited by
- 2,175
- References
- 53
- FWCI
- 0.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.