The DOI matches its Crossref record; 113 of the 113 references it cites were found in a registry or an index.
Extension of the Universal Force Field to Metal–Organic Frameworks
Abstract
The Universal Force Field (UFF) (Rappé et al., J. Am. Chem. Soc. 1992) provides a general approach to molecular mechanics for molecules and materials composed of elements throughout the periodic table. Though the method is tunable by the specification of bond orders and the introduction of effective charges, the presently available list of atom types is insufficient to treat various systems containing transition metals, including metal-organic frameworks (MOFs). As MOFs are composite materials built of a combination of individually stable building blocks, a plethora of MOF structures are possible, and the prediction of their structure with a low-cost method is important. We have extended the UFF parameter set to include transition metal elements Zn, Cu, Ni, Co, Fe, Mn, Cr, V, Ti, Sc, and Al, as they occur in MOFs, and have proposed additional O parameters that provide reliable structures of the metal oxide clusters of the connectors. We have benchmarked the performance of the MOF extension to UFF (UFF4MOF) with respect to experimentally available data and to DFT calculations. The parameters are available in various well-spread programs, including GULP, deMonNano, and ADF, and all information is provided to include them in other molecular mechanics codes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Density-functional exchange-energy approximation with correct asymptotic behavior
Becke, A. D. (1988) · Physical Review A · doi:10.1103/physreva.38.3098 · Cited by 53,711
CHARMM: A program for macromolecular energy, minimization, and dynamics calculations
Brooks, B. R., Bruccoleri, R. E., Olafson, B. D., States, D. J., Swaminathan, S., & Karplus, M. (1983) · Journal of Computational Chemistry · doi:10.1002/jcc.540040211 · Cited by 14,944
A Second Generation Force Field for the Simulation of Proteins, Nucleic Acids, and Organic Molecules
Cornell, W. D., Cieplak, P., Bayly, C. I., Gould, I. R., Merz, K. M., Ferguson, D. M., Spellmeyer, D. C., Fox, T., Caldwell, J. W., & Kollman, P. A. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00124a002 · Cited by 13,103
UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations
Rappe, A. K., Casewit, C. J., Colwell, K. S., Goddard, W. A., & Skiff, W. M. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00051a040 · Cited by 10,557
te Velde, G., Bickelhaupt, F. M., Baerends, E. J., Fonseca Guerra, C., van Gisbergen, S. J. A., Snijders, J. G., & Ziegler, T. (2001) · Journal of Computational Chemistry · doi:10.1002/jcc.1056 · Cited by 10,152
The Cambridge Structural Database: a quarter of a million crystal structures and rising
Allen, F. H. (2002) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768102003890 · Cited by 9,898
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Luminescent Functional Metal–Organic Frameworks
Cui, Y., Yue, Y., Qian, G., & Chen, B. (2012) · Chemical Reviews · doi:10.1021/cr200101d · Cited by 5,697
Relativistic regular two-component Hamiltonians
Lenthe, E. V., Baerends, E. J., & Snijders, J. G. (1993) · The Journal of Chemical Physics · doi:10.1063/1.466059 · Cited by 4,385
Perdew, J. P., & Yue, W. (1986) · Physical Review B · doi:10.1103/physrevb.33.8800 · Cited by 4,316
Cordero, B., Gómez, V., Platero-Prats, A. E., Revés, M., Echeverría, J., Cremades, E., Barragán, F., & Alvarez, S. (2008) · Dalton Transactions · doi:10.1039/b801115j · Cited by 4,169
Metal–Organic Frameworks in Biomedicine
Horcajada, P., Gref, R., Baati, T., Allan, P. K., Maurin, G., Couvreur, P., Férey, G., Morris, R. E., & Serre, C. (2012) · Chemical Reviews · doi:10.1021/cr200256v · Cited by 4,168
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Conformational analysis. 130. MM2. A hydrocarbon force field utilizing V1 and V2 torsional terms
Allinger, N. L. (1977) · Journal of the American Chemical Society · doi:10.1021/ja00467a001 · Cited by 3,556
Relativistic total energy using regular approximations
van Lenthe, E., Baerends, E. J., & Snijders, J. G. (1994) · The Journal of Chemical Physics · doi:10.1063/1.467943 · Cited by 3,329
Optimized Slater‐type basis sets for the elements 1–118
Van Lenthe, E., & Baerends, E. J. (2003) · Journal of Computational Chemistry · doi:10.1002/jcc.10255 · Cited by 2,902
Homochiral Metal–Organic Frameworks for Asymmetric Heterogeneous Catalysis
Yoon, M., Srirambalaji, R., & Kim, K. (2012) · Chemical Reviews · doi:10.1021/cr2003147 · Cited by 2,856
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Molecular mechanics. The MM3 force field for hydrocarbons. 1
Allinger, N. L., Yuh, Y. H., & Lii, J. H. (1989) · Journal of the American Chemical Society · doi:10.1021/ja00205a001 · Cited by 2,810
Magnetic metal–organic frameworks
Kurmoo, M. (2009) · Chemical Society Reviews · doi:10.1039/b804757j · Cited by 2,448
Geometry optimizations in the zero order regular approximation for relativistic effects
van Lenthe, E., Ehlers, A., & Baerends, E.-J. (1999) · The Journal of Chemical Physics · doi:10.1063/1.478813 · Cited by 2,443
Industrial applications of metal–organic frameworks
Czaja, A. U., Trukhan, N., & Müller, U. (2009) · Chemical Society Reviews · doi:10.1039/b804680h · Cited by 2,341
Postsynthetic Methods for the Functionalization of Metal–Organic Frameworks
Cohen, S. M. (2012) · Chemical Reviews · doi:10.1021/cr200179u · Cited by 2,336
The Reticular Chemistry Structure Resource (RCSR) Database of, and Symbols for, Crystal Nets
O’Keeffe, M., Peskov, M. A., Ramsden, S. J., & Yaghi, O. M. (2008) · Accounts of Chemical Research · doi:10.1021/ar800124u · Cited by 2,313
The General Utility Lattice Program ( GULP )
Gale, J. D., & Rohl, A. L. (2003) · Molecular Simulation · doi:10.1080/0892702031000104887 · Cited by 2,265
A Rationale for the Large Breathing of the Porous Aluminum Terephthalate (MIL‐53) Upon Hydration
Loiseau, T., Serre, C., Huguenard, C., Fink, G., Taulelle, F., Henry, M., Bataille, T., & Férey, G. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305413 · Cited by 2,166
Metal–Organic Frameworks as Efficient Materials for Drug Delivery
Horcajada, P., Serre, C., Vallet‐Regí, M., Sebban, M., Taulelle, F., & Férey, G. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200601878 · Cited by 2,024
Serre, C., Millange, F., Thouvenot, C., Noguès, M., Marsolier, G., Louër, D., & Férey, G. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0276974 · Cited by 1,980
Large-scale screening of hypothetical metal–organic frameworks
Wilmer, C. E., Leaf, M., Lee, C. Y., Farha, O. K., Hauser, B. G., Hupp, J. T., & Snurr, R. Q. (2012) · Nature Chemistry · doi:10.1038/nchem.1192 · Cited by 1,439
MOF thin films: existing and future applications
Shekhah, O., Liu, J., Fischer, R. A., & Wöll, C. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00147c · Cited by 1,395
Ferroelectric Metal–Organic Frameworks
Zhang, W., & Xiong, R.-G. (2012) · Chemical Reviews · doi:10.1021/cr200174w · Cited by 1,378
An object-oriented scripting interface to a legacy electronic structure code
Bahn, S. R., & Jacobsen, K. W. (2002) · Computing in Science & Engineering · doi:10.1109/5992.998641 · Cited by 1,359
Evaluating metal–organic frameworks for natural gas storage
Mason, J. A., Veenstra, M., & Long, J. R. (2014) · Chem. Sci. · doi:10.1039/c3sc52633j · Cited by 1,239
Li, H., Eddaoudi, M., Groy, T. L., & Yaghi, O. M. (1998) · Journal of the American Chemical Society · doi:10.1021/ja981669x · Cited by 1,220
Dybtsev, D. N., Chun, H., & Kim, K. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460712 · Cited by 1,208
Metal–Organic Framework Thin Films: From Fundamentals to Applications.
Bétard, A., & Fischer, R. A. (2012) · Chemical Reviews · doi:10.1021/cr200167v · Cited by 1,186
High H 2 Adsorption in a Microporous Metal–Organic Framework with Open Metal Sites
Chen, B., Ockwig, N. W., Millward, A. R., Contreras, D. S., & Yaghi, O. M. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462787 · Cited by 1,060
Chun, H., Dybtsev, D. N., Kim, H., & Kim, K. (2005) · Chemistry – A European Journal · doi:10.1002/chem.200401201 · Cited by 875
Porous metal–organic frameworks as platforms for functional applications
Jiang, H.-L., & Xu, Q. (2011) · Chemical Communications · doi:10.1039/c0cc05419d · Cited by 859
Ligand design for functional metal–organic frameworks
Almeida Paz, F. A., Klinowski, J., Vilela, S. M. F., Tomé, J. P. C., Cavaleiro, J. A. S., & Rocha, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15055c · Cited by 855
Calculations of molecules, clusters, and solids with a simplified LCAO-DFT-LDA scheme
Seifert, G., Porezag, D., & Frauenheim, T. (1996) · International Journal of Quantum Chemistry · doi:10.1002/(sici)1097-461x(1996)58:2<185::aid-qua7>3.0.co;2-u · Cited by 778
Lin, X., Telepeni, I., Blake, A. J., Dailly, A., Brown, C. M., Simmons, J. M., Zoppi, M., Walker, G. S., Thomas, K. M., Mays, T. J., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja806624j · Cited by 768
Chung, Y. G., Camp, J., Haranczyk, M., Sikora, B. J., Bury, W., Krungleviciute, V., Yildirim, T., Farha, O. K., Sholl, D. S., & Snurr, R. Q. (2014) · Chemistry of Materials · doi:10.1021/cm502594j · Cited by 743
Liu, L., Liu, Y., Zybin, S. V., Sun, H., & Goddard, W. A. (2011) · The Journal of Physical Chemistry A · doi:10.1021/jp201599t · Cited by 566
MOFs as catalysts: Activity, reusability and shape-selectivity of a Pd-containing MOF
LLABRESIXAMENA, F., ABAD, A., CORMA, A., & GARCIA, H. (2007) · Journal of Catalysis · doi:10.1016/j.jcat.2007.06.004 · Cited by 549
Controlling interpenetration in metal–organic frameworks by liquid-phase epitaxy
Shekhah, O., Wang, H., Paradinas, M., Ocal, C., Schüpbach, B., Terfort, A., Zacher, D., Fischer, R. A., & Wöll, C. (2009) · Nature Materials · doi:10.1038/nmat2445 · Cited by 529
Rapid parameterization of small molecules using the force field toolkit
Mayne, C. G., Saam, J., Schulten, K., Tajkhorshid, E., & Gumbart, J. C. (2013) · Journal of Computational Chemistry · doi:10.1002/jcc.23422 · Cited by 518
Designer coordination polymers: dimensional crossover architectures and proton conduction
Yamada, T., Otsubo, K., Makiura, R., & Kitagawa, H. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60028a · Cited by 514
Yang, Q., Liu, D., Zhong, C., & Li, J.-R. (2013) · Chemical Reviews · doi:10.1021/cr400005f · Cited by 514
Millange, F., Serre, C., & Férey, G. (2002) · Chemical Communications · doi:10.1039/b201381a · Cited by 505
Li, H., Wei, Y., Dong, X., Zang, S., & Mak, T. C. W. (2015) · Chemistry of Materials · doi:10.1021/cm504350q · Cited by 457
Application of a universal force field to metal complexes
Rappe, A. K., Colwell, K. S., & Casewit, C. J. (1993) · Inorganic Chemistry · doi:10.1021/ic00068a012 · Cited by 454
MOF catalysis in relation to their homogeneous counterparts and conventional solid catalysts
García-García, P., Müller, M., & Corma, A. (2014) · Chemical Science · doi:10.1039/c4sc00265b · Cited by 355
Volkringer, C., Popov, D., Loiseau, T., Férey, G., Burghammer, M., Riekel, C., Haouas, M., & Taulelle, F. (2009) · Chemistry of Materials · doi:10.1021/cm901983a · Cited by 345
Microporous Metal–Organic Frameworks with High Gas Sorption and Separation Capacity
Lee, J. Y., Olson, D. H., Pan, L., Emge, T. J., & Li, J. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600944 · Cited by 341
Highly-Selective and Reversible O2 Binding in Cr3(1,3,5-benzenetricarboxylate)2
Murray, L. J., Dinca, M., Yano, J., Chavan, S., Bordiga, S., Brown, C. M., & Long, J. R. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1027925 · Cited by 339
Li, X. Y., Czernuszewicz, R. S., Kincaid, J. R., Stein, P. B., & Spiro, T. G. (1990) · The Journal of Physical Chemistry · doi:10.1021/j100364a008 · Cited by 294
Denysenko, D., Grzywa, M., Tonigold, M., Streppel, B., Krkljus, I., Hirscher, M., Mugnaioli, E., Kolb, U., Hanss, J., & Volkmer, D. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201001872 · Cited by 276
Synthesis of MIL-102, a Chromium Carboxylate Metal−Organic Framework, with Gas Sorption Analysis
Surblé, S., Millange, F., Serre, C., Düren, T., Latroche, M., Bourrelly, S., Llewellyn, P. L., & Férey, G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja064343u · Cited by 251
Kundu, T., Mitra, S., Patra, P., Goswami, A., Díaz Díaz, D., & Banerjee, R. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402244 · Cited by 251
Gomez-Gualdron, D. A., Gutov, O. V., Krungleviciute, V., Borah, B., Mondloch, J. E., Hupp, J. T., Yildirim, T., Farha, O. K., & Snurr, R. Q. (2014) · Chemistry of Materials · doi:10.1021/cm502304e · Cited by 231
Fernandez, M., Woo, T. K., Wilmer, C. E., & Snurr, R. Q. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4006422 · Cited by 231
Liu, J., Lukose, B., Shekhah, O., Arslan, H. K., Weidler, P., Gliemann, H., Bräse, S., Grosjean, S., Godt, A., Feng, X., et al. (2012) · Scientific Reports · doi:10.1038/srep00921 · Cited by 227
Self-citationFeldblyum, J. I., Liu, M., Gidley, D. W., & Matzger, A. J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2055935 · Cited by 221
GULP: Capabilities and prospects
Gale, J. D. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.220.5.552.65070 · Cited by 218
Molecular Dynamics Simulation of Benzene Diffusion in MOF‐5: Importance of Lattice Dynamics
Amirjalayer, S., Tafipolsky, M. A., & Schmid, R. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200601746 · Cited by 215
MOF‐FF – A flexible first‐principles derived force field for metal‐organic frameworks
Bureekaew, S., Amirjalayer, S., Tafipolsky, M., Spickermann, C., Roy, T. K., & Schmid, R. (2013) · physica status solidi (b) · doi:10.1002/pssb.201248460 · Cited by 208
Classical force field parameters for the heme prosthetic group of cytochrome c
Autenrieth, F., Tajkhorshid, E., Baudry, J., & Luthey‐Schulten, Z. (2004) · Journal of Computational Chemistry · doi:10.1002/jcc.20079 · Cited by 196
A silver-based metal–organic framework material as a ‘reservoir’ of bactericidal metal ions
Berchel, M., Gall, T. L., Denis, C., Hir, S. L., Quentel, F., Elléouet, C., Montier, T., Rueff, J.-M., Salaün, J.-Y., Haelters, J.-P., et al. (2011) · New Journal of Chemistry · doi:10.1039/c1nj20202b · Cited by 195
MFU‐4 – A Metal‐Organic Framework for Highly Effective H2/D2 Separation
Teufel, J., Oh, H., Hirscher, M., Wahiduzzaman, M., Zhechkov, L., Kuc, A., Heine, T., Denysenko, D., & Volkmer, D. (2013) · Advanced Materials · doi:10.1002/adma.201203383 · Cited by 191
Self-citationGutov, O. V., Bury, W., Gomez‐Gualdron, D. A., Krungleviciute, V., Fairen‐Jimenez, D., Mondloch, J. E., Sarjeant, A. A., Al‐Juaid, S. S., Snurr, R. Q., Hupp, J. T., et al. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402895 · Cited by 181
Wilmer, C. E., & Snurr, R. Q. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.035 · Cited by 176
Physically-Motivated Force Fields from Symmetry-Adapted Perturbation Theory
McDaniel, J. G., & Schmidt, J. R. (2013) · The Journal of Physical Chemistry A · doi:10.1021/jp3108182 · Cited by 169
Vanduyfhuys, L., Vandenbrande, S., Verstraelen, T., Schmid, R., Waroquier, M., & Van Speybroeck, V. (2015) · Journal of Computational Chemistry · doi:10.1002/jcc.23877 · Cited by 168
Herbst, A., Khutia, A., & Janiak, C. (2014) · Inorganic Chemistry · doi:10.1021/ic5006456 · Cited by 164
Wang, S., Yang, Q., & Zhong, C. (2007) · Separation and Purification Technology · doi:10.1016/j.seppur.2007.07.050 · Cited by 150
Lin, L., Lee, K., Gagliardi, L., Neaton, J. B., & Smit, B. (2014) · Journal of Chemical Theory and Computation · doi:10.1021/ct500094w · Cited by 146
Recent developments in first-principles force fields for molecules in nanoporous materials
Fang, H., Demir, H., Kamakoti, P., & Sholl, D. S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13073h · Cited by 141
Biswas, S., Grzywa, M., Nayek, H. P., Dehnen, S., Senkovska, I., Kaskel, S., & Volkmer, D. (2009) · Dalton Transactions · doi:10.1039/b904280f · Cited by 135
Kozachuk, O. V., Yusenko, K. V., Noei, H., et al. (2011) · Chemical Communications · doi:10.1039/c1cc11107h · Cited by 133
Amine-Functionalized Metal Organic Framework as a Highly Selective Adsorbent for CO2 over CO
Wang, X., Li, H., & Hou, X. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3052938 · Cited by 129
Ab initio parametrized MM3 force field for the metal‐organic framework MOF‐5
Tafipolsky, M. A., Amirjalayer, S., & Schmid, R. (2007) · Journal of Computational Chemistry · doi:10.1002/jcc.20648 · Cited by 126
Getman, R. B., Miller, J. H., Wang, K., & Snurr, R. Q. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1094068 · Cited by 122
Millange, F., Guillou, N., Medina, M. E., Férey, G., Carlin‐Sinclair, A., Golden, K. M., & Walton, R. I. (2010) · Chemistry of Materials · doi:10.1021/cm1008587 · Cited by 122
Transferable Force Field for Metal–Organic Frameworks from First-Principles: BTW-FF
Bristow, J. K., Tiana, D., & Walsh, A. (2014) · Journal of Chemical Theory and Computation · doi:10.1021/ct500515h · Cited by 120
Identification of Adsorption Sites in Cu-BTC by Experimentation and Molecular Simulation
García‐Pérez, E., Gascón, J., Morales‐Flórez, V., Castillo, J. M., Kapteijn, F., & Calero, S. (2009) · Langmuir · doi:10.1021/la803085h · Cited by 117
Construction and Characterization of Structure Models of Crystalline Porous Polymers
Martin, R. L., & Haranczyk, M. (2014) · Crystal Growth & Design · doi:10.1021/cg500158c · Cited by 116
Tafipolsky, M. A., & Schmid, R. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp807487f · Cited by 108
McDaniel, J. G., Li, S., Tylianakis, E., Snurr, R. Q., & Schmidt, J. R. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp511674w · Cited by 103
Parkes, M. V., Demir, H., Teich-McGoldrick, S. L., Sholl, D. S., Greathouse, J. A., & Allendorf, M. D. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.03.027 · Cited by 100
First-Principles-Derived Force Field for Copper Paddle-Wheel-Based Metal−Organic Frameworks
Tafipolsky, M. A., Amirjalayer, S., & Schmid, R. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp104441d · Cited by 96
Grosch, J. S., & Paesani, F. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2100615 · Cited by 91
Pachfule, P., Chen, Y., Sahoo, S. C., Jiang, J., & Banerjee, R. (2011) · Chemistry of Materials · doi:10.1021/cm2004352 · Cited by 91
AuToGraFS: Automatic Topological Generator for Framework Structures
Addicoat, M. A., Coupry, D. E., & Heine, T. (2014) · The Journal of Physical Chemistry A · doi:10.1021/jp507643v · Cited by 82
Self-citationAmine-functionalized metal-organic frameworks for the transesterification of triglycerides
Chen, J., Liu, R., Gao, H., Chen, L., & Ye, D. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00253a · Cited by 82
Enhanced CO 2 adsorption capacity of amine-functionalized MIL-100(Cr) metal–organic frameworks
Cabello, C. P., Berlier, G., Magnacca, G., Rumori, P., & Palomino, G. T. (2014) · CrystEngComm · doi:10.1039/c4ce01265h · Cited by 80
Ab Initio Parametrized Force Field for the Flexible Metal–Organic Framework MIL-53(Al)
Vanduyfhuys, L., Verstraelen, T., Vandichel, M., Waroquier, M., & Speybroeck, V. V. (2012) · Journal of Chemical Theory and Computation · doi:10.1021/ct300172m · Cited by 78
In Silico Discovery of High Deliverable Capacity Metal–Organic Frameworks
Bao, Y. W., Martin, R. L., Simon, C. M., Harańczyk, M., Smit, B., & Deem, M. W. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5123486 · Cited by 69
Pham, T., Forrest, K. A., Hogan, A., McLaughlin, K., Belof, J. L., Eckert, J., & Space, B. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta14591c · Cited by 59
McDaniel, J. G., & Schmidt, J. R. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp303790r · Cited by 59
Cotton, F. A., Hillard, E. A., Murillo, C. A., & Wang, X. P. (2003) · Inorganic Chemistry · doi:10.1021/ic034646e · Cited by 50
Charge Equilibration Based on Atomic Ionization in Metal–Organic Frameworks
Wells, B. A., de Bruin‐Dickason, C. N., & Chaffee, A. L. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp510415h · Cited by 47
A molecular mechanics force field for the cobalt corrinoids
Marques, H. M., & Brown, K. L. (1995) · Journal of Molecular Structure THEOCHEM · doi:10.1016/0166-1280(95)04142-s · Cited by 44
Molecular simulation of gas adsorption and diffusion in a breathing MOF using a rigid force field
García‐Pérez, E., Serra‐Crespo, P., Hamad, S., Kapteijn, F., & Gascón, J. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp55416c · Cited by 40
Pham, T., Forrest, K. A., Hogan, A., Tudor, B. H., McLaughlin, K., Belof, J. L., Eckert, J., & Space, B. (2015) · Crystal Growth & Design · doi:10.1021/cg5018104 · Cited by 36
Garberoglio, G., & Taioli, S. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.07.026 · Cited by 32
Zeolite Force Fields and Experimental Siliceous Frameworks in a Comparative Infrared Study
Bueno-Pérez, R., Calero, S., Dubbeldam, D., Ania, C. O., Parra, J. B., Zaderenko, A. P., & Merkling, P. J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp307972r · Cited by 32
Cited by
Quantum-Chemical Characterization of the Properties and Reactivities of Metal–Organic Frameworks
Odoh, S. O., Cramer, C. J., Truhlar, D. G., & Gagliardi, L. (2015) · Chemical Reviews · doi:10.1021/cr500551h · Cited by 306
Force-Field Prediction of Materials Properties in Metal-Organic Frameworks
Boyd, P. G., Moosavi, S. M., Witman, M., & Smit, B. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02532 · Cited by 304
A Universal Machine Learning Algorithm for Large-Scale Screening of Materials
Fanourgakis, G. S., Gkagkas, K., Tylianakis, E., & Froudakis, G. E. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11084 · Cited by 180
Leveraging Cheminformatics Strategies for Inorganic Discovery: Application to Redox Potential Design
Janet, J. P., Gani, T. Z. H., Steeves, A. H., Ioannidis, E. I., & Kulik, H. J. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00808 · Cited by 56
Metadata
- Authors
- Addicoat, M. A., Vankova, N., Akter, I. F., & Heine, T.
- Venue
- Journal of Chemical Theory and Computation
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-31
- Volume
- 10
- Issue
- 2
- Pages
- 880-891
- ISSN
- 1549-9618 (ISSN-L)
- 1549-9626
- OpenAlex
- W1988375149
- Cited by
- 293
- References
- 113
- FWCI
- 9.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.