The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Influence of Moisture on CO2 Separation from Gas Mixture by a Nanoporous Adsorbent Based on Polyethylenimine-Modified Molecular Sieve MCM-41
Abstract
Adsorption separation of CO 2 from simulated flue gas containing CO 2, O 2, and N 2 with and without moisture was investigated using a novel nanoporous adsorbent based on polyethylenimine (PEI)-modified mesoporous molecular sieve MCM-41 in a flow system. The CO 2 adsorption capacity and CO 2 separation selectivity of MCM-41 were greatly improved by loading PEI into its nanosized pore channels, which made the resulting adsorbent operating like a “molecular basket” for CO 2 . CO 2 adsorption capacity of the MCM-41-PEI adsorbent for the simulated moist flue gas was higher than that for the simulated dry flue gas. CO 2 separation selectivity of the MCM-41-PEI adsorbent was also improved in the presence of moisture when compared with those in the dry gas condition. The influence of moisture concentrations in the simulated flue gas on the CO 2 adsorption separation performance was also examined. The results of adsorption/desorption separation cycles showed that the MCM-41-PEI adsorbent was stable over 10 cycles of adsorption/desorption operations. The hydrothermal stability of the “molecular basket” adsorbent was better than that of the MCM-41 support alone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Song, C. (2003) · Catalysis Today · doi:10.1016/s0920-5861(03)00412-7 · Cited by 2,018
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Self-citationAdsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Self-citationAmine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Clarkson, C. R., & Bustin, R. M. (2000) · International Journal of Coal Geology · doi:10.1016/s0166-5162(99)00032-4 · Cited by 456
Technology for removing carbon dioxide from power plant flue gas by the physical adsorption method
Ishibashi, M., Ota, H., Akutsu, N., Umeda, S., Tajika, M., Izumi, J., Yasutake, A., Kabata, T., & Kageyama, Y. (1996) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00279-0 · Cited by 200
Heuchel, M., Davies, G. M., Buss, E., & Seaton, N. A. (1999) · Langmuir · doi:10.1021/la9904298 · Cited by 200
Adsorption and Desorption of Carbon Dioxide onto and from Activated Carbon at High Pressures
Chen, J. H., Wong, D. S. H., Tan, C. S., Subramanian, R., Lira, C. T., & Orth, M. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960227w · Cited by 191
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Song, C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.029 · Cited by 1,809
Self-citationA Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Porous materials for carbon dioxide separations
Siegelman, R. L., Kim, E. J., & Long, J. R. (2021) · Nature Materials · doi:10.1038/s41563-021-01054-8 · Cited by 722
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Advances in CO2 capture technology: A patent review
Li, B., Duan, Y., Luebke, D., & Morreale, B. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.009 · Cited by 657
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Carbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
Self-citationUnderstanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507
Carbon Dioxide Capture Adsorbents: Chemistry and Methods
Patel, H. A., Byun, J., & Yavuz, C. T. (2017) · ChemSusChem · doi:10.1002/cssc.201601545 · Cited by 492
Li, L., Zhao, N., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2011.08.022 · Cited by 480
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Self-citationComparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Mason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
Wang, X., Schwartz, V., Clark, J. C., Ma, X., Overbury, S. H., Xu, X., & Song, C. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809946y · Cited by 381
Self-citationAdsorption of CO2 on Amine-Functionalized Y-Type Zeolites
Su, F., Lu, C., Kuo, S.-C., & Zeng, W. (2010) · Energy & Fuels · doi:10.1021/ef901077k · Cited by 359
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Chen, C., Yang, S.-T., Ahn, W.-S., & Ryoo, R. (2009) · Chemical Communications · doi:10.1039/b905589d · Cited by 340
Solid amine sorbents for CO2 capture by chemical adsorption: A review
Ünveren, E. E., Monkul, B. Ö., Sarıoğlan, Ş., Karademir, N., & Alper, E. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.001 · Cited by 325
Capture of CO2 from flue gas via multiwalled carbon nanotubes
Su, F., Lu, C., Cnen, W., Bai, H., & Hwang, J. F. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.01.007 · Cited by 311
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
Ebner, A. D., & Ritter, J. A. (2009) · Separation Science and Technology · doi:10.1080/01496390902733314 · Cited by 301
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Stuckert, A. N., & Yang, R. T. (2011) · Environmental Science & Technology · doi:10.1021/es202647a · Cited by 289
Synthesis–Structure–Property Relationships for Hyperbranched Aminosilica CO2 Adsorbents
Drese, J. H., Choi, S., Lively, R. P., Koros, W. J., Fauth, D. J., Gray, M. L., & Jones, C. W. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901461 · Cited by 287
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900837t · Cited by 281
Saha, D., & Kienbaum, M. J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.051 · Cited by 275
Amine-bearing mesoporous silica for CO2 removal from dry and humid air
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.044 · Cited by 274
A Unified Approach to CO2–Amine Reaction Mechanisms
Said, R. B., Kolle, J. M., Essalah, K., Tangour, B., & Sayari, A. (2020) · ACS Omega · doi:10.1021/acsomega.0c03727 · Cited by 273
CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2009.12.070 · Cited by 269
Zhao, F., Repo, E., Song, Y., Yin, D., Hammouda, S. B., Chen, L., Kalliola, S., Tang, J., Tam, K. C., & Sillanpää, M. (2017) · Green Chemistry · doi:10.1039/c7gc01770g · Cited by 267
Molecular simulation of separation of CO2 from flue gases in CU‐BTC metal‐organic framework
Yang, Q., Xue, C., Zhong, C., & Chen, J. (2007) · AIChE Journal · doi:10.1002/aic.11298 · Cited by 259
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas
Nie, L., Mu, Y., Jin, J., Chen, J., & Mi, J. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.07.012 · Cited by 122
Vilarrasa-García, E., Cecilia, J. A., Bastos-Neto, M., Cavalcante, C. L., Azevedo, D. C. S., & Rodríguez-Castellón, E. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.054 · Cited by 48
A CO 2 -responsive hydrogel film for optical sensing of dissolved CO 2
Wang, R., Zhang, M., Guan, Y., Chen, M., & Zhang, Y. (2019) · Soft Matter · doi:10.1039/c9sm00958b · Cited by 21
Zeolite and Silica-based CO2 Adsorbents
Laugel, G., Bingre, R., & Louis, B. (2018) · Post-combustion Carbon Dioxide Capture Materials · doi:10.1039/9781788013352-00076 · Cited by 2
Metadata
- Authors
- Xu, X., Song, C., Miller, B. G., & Scaroni, A. W.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-09-17
- Volume
- 44
- Issue
- 21
- Pages
- 8113-8119
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1983296264
- Cited by
- 379
- References
- 20
- FWCI
- 9.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.