The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Applications of Pore-Expanded Mesoporous Silica. 2. Development of a High-Capacity, Water-Tolerant Adsorbent for CO2
Abstract
A novel high-capacity, water-tolerant adsorbent for CO 2 was developed. It consisted of diethanolamine (DEA) loaded pore-expanded MCM-41 silica (PE-MCM-41). Due to its very large pore volume, PE-MCM-41 silica was capable of accommodating a greater quantity of amine resulting in higher CO 2 adsorption capacity compared to the other supports including activated carbon, silica gel, and standard MCM-41 silica. Adsorption measurements were conducted by gravimetry using dry CO 2 to obtain uptake curves and apparent rate data. The capacity and uptake rate reached maxima with respect to amine content and then declined due to the deposition of excess amine on the particle's external surface and within the interparticle voids. At CO 2 partial pressures below 0.15 atm, the current DEA loaded PE-MCM-41 adsorbent was found to be superior to the more conventional zeolite 13X. Adsorption studies with humid CO 2 revealed that the adsorption capacity of the PE-MCM-41-based material was insensitive to the presence of moisture, which represents a major advantage over zeolite 13X. Repeated adsorption−desorption cycles revealed that our novel adsorbent exhibited good cyclic stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Self-citationXu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Satyapal, S., Filburn, T., Trela, J., & Strange, J. (2001) · Energy & Fuels · doi:10.1021/ef0002391 · Cited by 389
Absorption of Carbon Dioxide into Aqueous Blends of Diethanolamine and Methyldiethanolamine
Rinker, E. B., Ashour, S. S., & Sandall, O. C. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990850r · Cited by 364
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
Sayari, A., Hamoudi, S., & Yang, Y. (2005) · Chemistry of Materials · doi:10.1021/cm048393e · Cited by 340
Self-citationCorrosion Behavior of Carbon Steel in the CO2 Absorption Process Using Aqueous Amine Solutions
Veawab, A., Tontiwachwuthikul, P., & Chakma, A. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9901630 · Cited by 335
Sayari, A., Yang, Y., Kruk, M., & Jaroniec, M. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp984504j · Cited by 237
Self-citation
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Demessence, A., D’Alessandro, D. M., Foo, M. L., & Long, J. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja903411w · Cited by 1,115
Nanotechnology for Environmental Remediation: Materials and Applications
Guerra, F. D., Attia, M. F., Whitehead, D. C., & Alexis, F. (2018) · Molecules · doi:10.3390/molecules23071760 · Cited by 787
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Post-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials
Son, W.-J., Choi, J.-S., & Ahn, W.-S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.049 · Cited by 618
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Self-citationCarbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Self-citationCarbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Self-citationLi, B., Zhang, Z., Li, Y., Yao, K., Zhu, Y., Deng, Z., Yang, F., Zhou, X., Li, G., Wu, H., et al. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105966 · Cited by 467
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Self-citationAbanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Amine-modified ordered mesoporous silica: Effect of pore size on carbon dioxide capture
Zeleňák, V., Badaničová, M., Halamová, D., Čejka, J., Zukal, A., Murafa, N., & Goerigk, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.025 · Cited by 395
Harlick, P. J. E., & Sayari, A. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051286p · Cited by 393
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites
Su, F., Lu, C., Kuo, S.-C., & Zeng, W. (2010) · Energy & Fuels · doi:10.1021/ef901077k · Cited by 359
High‐Surface‐Area Carbon Molecular Sieves for Selective CO2 Adsorption
Wahby, A., Ramos‐Fernández, J. M., Martínez‐Escandell, M., Sepúlveda‐Escribano, A., Silvestre‐Albero, J., & Rodríguez‐Reinoso, F. (2010) · ChemSusChem · doi:10.1002/cssc.201000083 · Cited by 353
Chen, C., Yang, S.-T., Ahn, W.-S., & Ryoo, R. (2009) · Chemical Communications · doi:10.1039/b905589d · Cited by 340
Heydari-Gorji, A., Belmabkhout, Y., & Sayari, A. (2011) · Langmuir · doi:10.1021/la202972t · Cited by 335
Self-citationSolid amine sorbents for CO2 capture by chemical adsorption: A review
Ünveren, E. E., Monkul, B. Ö., Sarıoğlan, Ş., Karademir, N., & Alper, E. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.001 · Cited by 325
Efficient CO2 Capturer Derived from As‐Synthesized MCM‐41 Modified with Amine
Yue, M. B., Sun, L. B., Cao, Y., Wang, Y., Wang, Z. J., & Zhu, J. H. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200701467 · Cited by 318
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Belmabkhout, Y., & Sayari, A. (2009) · Adsorption · doi:10.1007/s10450-009-9185-6 · Cited by 288
Self-citationSynthesis–Structure–Property Relationships for Hyperbranched Aminosilica CO2 Adsorbents
Drese, J. H., Choi, S., Lively, R. P., Koros, W. J., Fauth, D. J., Gray, M. L., & Jones, C. W. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901461 · Cited by 287
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Development of hybrid amine-functionalized MCM-41 sorbents for CO2 capture
Wang, X., Chen, L., & Guo, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.107 · Cited by 275
Amine-Modified SBA-15: Effect of Pore Structure on the Performance for CO2 Capture
Yan, X., Zhang, L., Zhang, Y., Yang, G., & Yan, Z. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101240d · Cited by 275
Promoting the CO2 adsorption in the amine-containing SBA-15 by hydroxyl group
Yue, M. B., Sun, L. B., Cao, Y., Wang, Z. J., Wang, Y., Yu, Q., & Zhu, J. H. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.12.016 · Cited by 261
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Bhagiyalakshmi, M., Yun, L. J., Anuradha, R., & Jang, H. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.097 · Cited by 236
CO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Effects of O2 and SO2 on the Capture Capacity of a Primary-Amine Based Polymeric CO2 Sorbent
Hallenbeck, A. P., & Kitchin, J. R. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400582a · Cited by 83
CO2 capture over steam and KOH activated biochar: effect of relative humidity
Zhang, C., Sun, S., Xu, S., & Wu, C. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106608 · Cited by 69
Development of TREN dendrimers over mesoporous SBA-15 for CO2 adsorption
Bhagiyalakshmi, M., Park, S. D., Cha, W. S., & Jang, H. T. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.04.066 · Cited by 40
Metadata
- Authors
- Franchi, R. S., Harlick, P. J. E., & Sayari, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-09-09
- Volume
- 44
- Issue
- 21
- Pages
- 8007-8013
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2021156719
- Cited by
- 400
- References
- 13
- FWCI
- 13.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.