The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Applications of Pore-Expanded Mesoporous Silica. 5. Triamine Grafted Material with Exceptional CO2 Dynamic and Equilibrium Adsorption Performance
Abstract
Application of pore-expanded MCM-41 (PE-MCM-41) mesoporous silica coated with 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (TRI) has been extensively examined for the adsorption of CO 2 from N 2 . A systematic study of the amine loading as a function of the relative amounts of TRI and water used during the grafting procedure and the temperature of the grafting reaction was carried out. Extremely high levels of active amine content were achieved using prehydrated silica surfaces at grafting temperatures below reflux in order to facilitate thermally controlled water-aided surface polymerization of the aminosilanes. The CO 2 adsorption capacities and rates were determined for all materials as a function of the amount of TRI and water per gram of support added to the grafting mixture. The optimal TRI grafted PE-MCM-41 adsorbent exhibited a 2.65 mmol/g adsorption capacity at 25 °C and 1.0 atm for a dry 5% CO 2 in N 2 feed mixture, which exceeded all literature reported values, for both meso- and microporous materials under the conditions used in this study. Further, the apparent adsorption and desorption rates with the amine functionalized materials were exceedingly high. When considering the grafted amine quantity, the adsorption capacity and rate were found to be mutually dependent on each other, exhibiting an apparent optimal combination. In comparison to zeolite 13X, the optimally loaded TRI-PE-MCM-41 was far superior in terms of dynamic adsorption and desorption performance. These results were further enhanced when the adsorbents were challenged with a humid stream of 5% CO 2 /N 2 . The TRI-PE-MCM-41 exhibited a 10% increase in CO 2 adsorption capacity, whereas the 13X zeolite did not retain any significant CO 2 adsorption capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis
Corma, A. (1997) · Chemical Reviews · doi:10.1021/cr960406n · Cited by 5,791
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Functionalized Monolayers on Ordered Mesoporous Supports
Feng, X., Fryxell, G. E., Wang, L.-Q., Kim, A. Y., Liu, J., & Kemner, K. M. (1997) · Science · doi:10.1126/science.276.5314.923 · Cited by 1,562
Hybrid Inorganic-Organic Mesoporous Silicates—Nanoscopic Reactors Coming of Age
Stein, A., Melde, B. J., & Schroden, R. C. (2000) · Advanced Materials · doi:10.1002/1521-4095(200010)12:19<1403::aid-adma1403>3.0.co;2-x · Cited by 1,531
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Self-citationPeriodic Mesoporous Silica-Based Organic−Inorganic Nanocomposite Materials
Sayari, A., & Hamoudi, S. (2001) · Chemistry of Materials · doi:10.1021/cm011039l · Cited by 844
Self-citationAdvances in Microporous and Mesoporous Solids—Highlights of Recent Progress
Stein, A. (2003) · Advanced Materials · doi:10.1002/adma.200300007 · Cited by 749
Catalysis by Crystalline Mesoporous Molecular Sieves
Sayari, A. (1996) · Chemistry of Materials · doi:10.1021/cm950585+ · Cited by 719
Self-citationAmine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Recycling of carbon dioxide to methanol and derived products – closing the loop
Goeppert, A., Czaun, M., Jones, J.-P., Surya Prakash, G. K., & Olah, G. A. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00122b · Cited by 1,528
Anthropogenic Chemical Carbon Cycle for a Sustainable Future
Olah, G. A., Prakash, G. K. S., & Goeppert, A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja202642y · Cited by 1,376
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Stabilization of Amine-Containing CO2 Adsorbents: Dramatic Effect of Water Vapor
Sayari, A., & Belmabkhout, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1013773 · Cited by 635
Self-citationAdsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials
Son, W.-J., Choi, J.-S., & Ahn, W.-S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.049 · Cited by 618
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Self-citationCarbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Self-citationCarbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Serna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.042 · Cited by 489
Self-citationLi, L., Zhao, N., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2011.08.022 · Cited by 480
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Self-citationRecent advances in direct air capture by adsorption
Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 456
Abanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Nanoscale design to enable the revolution in renewable energy
Baxter, J., Bian, Z., Chen, G., Danielson, D., Dresselhaus, M. S., Fedorov, A. G., Fisher, T. S., Jones, C. W., Maginn, E., Kortshagen, U., et al. (2009) · Energy & Environmental Science · doi:10.1039/b821698c · Cited by 431
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
CO2 cycloaddition of styrene oxide over MOF catalysts
Kim, J., Kim, S.-N., Jang, H.-G., Seo, G., & Ahn, W.-S. (2013) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.12.018 · Cited by 418
New Insights into the Interactions of CO2 with Amine-Functionalized Silica
Serna-Guerrero, R., Da’na, E., & Sayari, A. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801186g · Cited by 404
Self-citationAmine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Amine-modified ordered mesoporous silica: Effect of pore size on carbon dioxide capture
Zeleňák, V., Badaničová, M., Halamová, D., Čejka, J., Zukal, A., Murafa, N., & Goerigk, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.025 · Cited by 395
Mason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
CO2-Induced Degradation of Amine-Containing Adsorbents: Reaction Products and Pathways
Sayari, A., Heydari-Gorji, A., & Yang, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja304888a · Cited by 365
Self-citationA general framework for the assessment of solar fuel technologies
Herron, J. A., Kim, J., Upadhye, A. A., Huber, G. W., & Maravelias, C. T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01958j · Cited by 347
Chen, C., Yang, S.-T., Ahn, W.-S., & Ryoo, R. (2009) · Chemical Communications · doi:10.1039/b905589d · Cited by 340
Heydari-Gorji, A., Belmabkhout, Y., & Sayari, A. (2011) · Langmuir · doi:10.1021/la202972t · Cited by 335
Self-citationSolid amine sorbents for CO2 capture by chemical adsorption: A review
Ünveren, E. E., Monkul, B. Ö., Sarıoğlan, Ş., Karademir, N., & Alper, E. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.001 · Cited by 325
Amine-modified MCM-41 mesoporous silica for carbon dioxide capture
Mello, M. R., Phanon, D., Silveira, G. Q., Llewellyn, P. L., & Ronconi, C. M. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.02.022 · Cited by 324
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Belmabkhout, Y., & Sayari, A. (2009) · Adsorption · doi:10.1007/s10450-009-9185-6 · Cited by 288
Self-citationRecent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Mohanty, P., Kull, L. D., & Landskron, K. (2011) · Nature Communications · doi:10.1038/ncomms1405 · Cited by 282
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900837t · Cited by 281
Self-citationTwo-dimensional zeolites: dream or reality?
Roth, W. J., & Čejka, J. (2011) · Catalysis Science & Technology · doi:10.1039/c0cy00027b · Cited by 275
Amine-bearing mesoporous silica for CO2 removal from dry and humid air
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.044 · Cited by 274
Self-citationA Unified Approach to CO2–Amine Reaction Mechanisms
Said, R. B., Kolle, J. M., Essalah, K., Tangour, B., & Sayari, A. (2020) · ACS Omega · doi:10.1021/acsomega.0c03727 · Cited by 273
Self-citationEvaluation of solid sorbents as a retrofit technology for CO2 capture
Sjostrom, S., & Krutka, H. (2010) · Fuel · doi:10.1016/j.fuel.2009.11.019 · Cited by 271
CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2009.12.070 · Cited by 269
CO2 Capture from Dilute Gases as a Component of Modern Global Carbon Management
Jones, C. W. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114252 · Cited by 268
Thermal, Oxidative, and CO2-Induced Degradation of Supported Polyethylenimine Adsorbents
Heydari-Gorji, A., & Sayari, A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3003446 · Cited by 253
Self-citationNanostructured silica as a support for regenerable high-capacity organoamine-based CO2 sorbents
Goeppert, A., Meth, S., Prakash, G. K. S., & Olah, G. A. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00136h · Cited by 253
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Bhagiyalakshmi, M., Yun, L. J., Anuradha, R., & Jang, H. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.097 · Cited by 236
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
CO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Controlling the Adsorption Enthalpy of CO2 in Zeolites by Framework Topology and Composition
Grajciar, L., Čejka, J., Zukal, A., Otero Areán, C., Turnes Palomino, G., & Nachtigall, P. (2012) · ChemSusChem · doi:10.1002/cssc.201200270 · Cited by 112
Metadata
- Authors
- Harlick, P. J. E., & Sayari, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-12-20
- Volume
- 46
- Issue
- 2
- Pages
- 446-458
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2079549396
- Cited by
- 488
- References
- 25
- FWCI
- 32.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.