The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Detailed Studies of a High-Capacity Electrode Material for Rechargeable Batteries, Li2MnO3−LiCo1/3Ni1/3Mn1/3O2
Abstract
Lithium-excess manganese layered oxides, which are commonly described by the chemical formula zLi(2)MnO(3)-(1-z)LiMeO(2) (Me = Co, Ni, Mn, etc.), are of great importance as positive electrode materials for rechargeable lithium batteries. In this Article, Li(x)Co(0.13)Ni(0.13)Mn(0.54)O(2-δ) samples are prepared from Li(1.2)Ni(0.13)Co(0.13)Mn(0.54)O(2) (or 0.5Li(2)MnO(3)-0.5LiCo(1/3)Ni(1/3)Mn(1/3)O(2)) by an electrochemical oxidation/reduction process in an electrochemical cell to study a reaction mechanism in detail before and after charging across a voltage plateau at 4.5 V vs Li/Li(+). Changes of the bulk and surface structures are examined by synchrotron X-ray diffraction (SXRD), X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectroscopy (SIMS). SXRD data show that simultaneous oxygen and lithium removal at the voltage plateau upon initial charge causes the structural rearrangement, including a cation migration process from metal to lithium layers, which is also supported by XAS. This is consistent with the mechanism proposed in the literature related to the Li-excess manganese layered oxides. Oxygen removal associated with the initial charge on the high voltage plateau causes oxygen molecule generation in the electrochemical cells. The oxygen molecules in the cell are electrochemically reduced in the subsequent discharge below 3.0 V, leading to the extra capacity. Surface analysis confirms the formation of the oxygen containing species, such as lithium carbonate, which accumulates on the electrode surface. The oxygen containing species are electrochemically decomposed upon second charge above 4.0 V. The results suggest that, in addition to the conventional transition metal redox reactions, at least some of the reversible capacity for the Li-excess manganese layered oxides originates from the electrochemical redox reaction of the oxygen molecules at the electrode surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
VESTA: a three-dimensional visualization system for electronic and structural analysis
Momma, K., & Izumi, F. (2008) · Journal of Applied Crystallography · doi:10.1107/s0021889808012016 · Cited by 6,834
Theoretical approaches to x-ray absorption fine structure
Rehr, J. J., & Albers, R. C. (2000) · Reviews of Modern Physics · doi:10.1103/revmodphys.72.621 · Cited by 3,301
IFEFFIT : interactive XAFS analysis and FEFF fitting
Newville, M. (2001) · Journal of Synchrotron Radiation · doi:10.1107/s0909049500016964 · Cited by 3,046
A Polymer Electrolyte‐Based Rechargeable Lithium/Oxygen Battery
Abraham, K. M., & Jiang, Z. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836378 · Cited by 2,092
Optimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Lu, Y.-C., Xu, Z., Gasteiger, H. A., Chen, S., Hamad-Schifferli, K., & Shao-Horn, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1036572 · Cited by 1,238
Rechargeable Li2O2 Electrode for Lithium Batteries
Ogasawara, T., Débart, A., Holzapfel, M., Novák, P., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056811q · Cited by 1,132
Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries
Thackeray, M. M., Johnson, C. S., Vaughey, J. T., Ha N. LiCurrent address eVionyx Inc., & Hackney, S. A. (2005) · Journal of Materials Chemistry · doi:10.1039/b417616m · Cited by 1,109
Cited by
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Metal–air batteries: from oxygen reduction electrochemistry to cathode catalysts
Cheng, F., & Chen, J. (2012) · Chemical Society Reviews · doi:10.1039/c1cs15228a · Cited by 2,677
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries
Lee, J., Urban, A., Li, X., Su, D., Hautier, G., & Ceder, G. (2014) · Science · doi:10.1126/science.1246432 · Cited by 1,248
Luo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Self-citationElectrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Nanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Komaba, S., Yabuuchi, N., Nakayama, T., Ogata, A., Ishikawa, T., & Nakai, I. (2012) · Inorganic Chemistry · doi:10.1021/ic300357d · Cited by 822
Self-citationRecent progress in high-voltage lithium ion batteries
Hu, M., Pang, X., & Zhou, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.024 · Cited by 776
Qiu, B., Zhang, M., Wu, L., Wang, J., Xia, Y., Qian, D., Liu, H., Hy, S., Chen, Y., An, K., et al. (2016) · Nature Communications · doi:10.1038/ncomms12108 · Cited by 734
Reversible Mn2+/Mn4+ double redox in lithium-excess cathode materials
Lee, J., Kitchaev, D. A., Kwon, D.-H., Lee, C.-W., Papp, J. K., Liu, Y.-S., Lun, Z., Clément, R. J., Shi, T., McCloskey, B. D., et al. (2018) · Nature · doi:10.1038/s41586-018-0015-4 · Cited by 729
Gent, W. E., Lim, K., Liang, Y., Li, Q., Barnes, T., Ahn, S.-J., Stone, K. H., McIntire, M., Hong, J., Song, J. H., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-02041-x · Cited by 695
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Assat, G., Foix, D., Delacourt, C., Iadecola, A., Dedryvère, R., & Tarascon, J.-M. (2017) · Nature Communications · doi:10.1038/s41467-017-02291-9 · Cited by 671
Grimaud, A., Demortière, A., Saubanère, M., Dachraoui, W., Duchamp, M., Doublet, M.-L., & Tarascon, J.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.189 · Cited by 649
Electrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
High-Energy Cathode Materials (Li2MnO3–LiMO2) for Lithium-Ion Batteries
Yu, H., & Zhou, H. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400032v · Cited by 624
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Clément, R. J., Lun, Z., & Ceder, G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02803j · Cited by 560
Two‐Dimensional Nanoarchitectures for Lithium Storage
Liu, J., & Liu, X. (2012) · Advanced Materials · doi:10.1002/adma.201104993 · Cited by 543
Injection of oxygen vacancies in the bulk lattice of layered cathodes
Yan, P., Zheng, J., Tang, Z.-K., Devaraj, A., Chen, G., Amine, K., Zhang, J.-G., Liu, L.-M., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0428-8 · Cited by 520
Li‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization
Zheng, J., Myeong, S., Cho, W., Yan, P., Xiao, J., Wang, C., Cho, J., & Zhang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601284 · Cited by 513
Yabuuchi, N., Takeuchi, M., Nakayama, M., Shiiba, H., Ogawa, M., Nakayama, K., Ohta, T., Endo, D., Ozaki, T., Inamasu, T., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1504901112 · Cited by 498
Self-citationLayered lithium transition metal oxide cathodes towards high energy lithium-ion batteries
He, P., Yu, H., Li, D., & Zhou, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14305d · Cited by 472
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Yabuuchi, N., Nakayama, M., Takeuchi, M., Komaba, S., Hashimoto, Y., Mukai, T., Shiiba, H., Sato, K., Kobayashi, Y., Nakao, A., et al. (2016) · Nature Communications · doi:10.1038/ncomms13814 · Cited by 459
Self-citationYabuuchi, N., Hara, R., Kajiyama, M., Kubota, K., Ishigaki, T., Hoshikawa, A., & Komaba, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301453 · Cited by 432
Self-citationZuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Sathiya, M., Ramesha, K., Rousse, G., Foix, D., Gonbeau, D., Prakash, A. S., Doublet, M. L., Hemalatha, K., & Tarascon, J.-M. (2013) · Chemistry of Materials · doi:10.1021/cm400193m · Cited by 405
Advances and challenges of sodium ion batteries as post lithium ion batteries
Sawicki, M., & Shaw, L. L. (2015) · RSC Advances · doi:10.1039/c5ra08321d · Cited by 401
Qing, R., Shi, J., Xiao, D., Zhang, X., Yin, Y., Zhai, Y., Gu, L., & Guo, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501914 · Cited by 386
Requirements for reversible extra-capacity in Li-rich layered oxides for Li-ion batteries
Xie, Y., Saubanère, M., & Doublet, M.-L. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02328b · Cited by 376
Scavenging Materials to Stabilize LiPF6‐Containing Carbonate‐Based Electrolytes for Li‐Ion Batteries
Han, J., Kim, K., Lee, Y., & Choi, N. (2019) · Advanced Materials · doi:10.1002/adma.201804822 · Cited by 354
Li, B., Yan, H., Ma, J., Yu, P., Xia, D., Huang, W., Chu, W., & Wu, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400436 · Cited by 347
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Zhao, S., Guo, Z., Yan, K., Wan, S., He, F., Sun, B., & Wang, G. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.008 · Cited by 325
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Hong, J., Lim, H.-D., Lee, M., Kim, S.-W., Kim, H., Oh, S.-T., Chung, G.-C., & Kang, K. (2012) · Chemistry of Materials · doi:10.1021/cm3005634 · Cited by 304
Choi, N.-S., Han, J.-G., Ha, S.-Y., Park, I., & Back, C.-K. (2015) · RSC Advances · doi:10.1039/c4ra11575a · Cited by 297
Evaluating the performance of nanostructured materials as lithium-ion battery electrodes
Armstrong, M. J., O’Dwyer, C., Macklin, W. J., & Holmes, J. D. (2014) · Nano Research · doi:10.1007/s12274-013-0375-x · Cited by 285
Advanced cobalt-free cathode materials for sodium-ion batteries
Chu, S., Guo, S., & Zhou, H. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00442e · Cited by 272
A review on the stability and surface modification of layered transition-metal oxide cathodes
Kim, J.-M., Zhang, X., Zhang, J.-G., Manthiram, A., Meng, Y. S., & Xu, W. (2021) · Materials Today · doi:10.1016/j.mattod.2020.12.017 · Cited by 270
Lee, J., Seo, D.-H., Balasubramanian, M., Twu, N., Li, X., & Ceder, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02329g · Cited by 269
Abuse tolerance behavior of layered oxide-based Li-ion battery during overcharge and over-discharge
Qian, K., Li, Y., He, Y.-B., Liu, D., Zheng, Y., Luo, D., Li, B., & Kang, F. (2016) · RSC Advances · doi:10.1039/c6ra11288a · Cited by 106
Metadata
- Authors
- Yabuuchi, N., Yoshii, K., Myung, S.-T., Nakai, I., & Komaba, S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-03-04
- Volume
- 133
- Issue
- 12
- Pages
- 4404-4419
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1972295088
- Cited by
- 1,188
- References
- 42
- FWCI
- 56.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.