The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Enhancing the Stability of CH3NH3PbBr3 Quantum Dots by Embedding in Silica Spheres Derived from Tetramethyl Orthosilicate in “Waterless” Toluene
Abstract
Methylammonium lead halide perovskites suffer from poor stability because of their high sensitivity to moisture. Inorganic material coatings of SiO2 are preferred for coupling with perovskites to improve their stability, whereas the conventional SiO2 formation method is unsuitable because it requires water. Here, a simple SiO2 generation method based on the high hydrolysis rate of tetramethyl orthosilicate in analytical-grade toluene was developed to avoid the addition of water and catalyst. As a result, SiO2-encapsulated CH3NH3PbBr3 quantum dots (MAPB-QDs/SiO2) were fabricated without decreasing the quantum yield. Photostability tests indicated that the MAPB-QDs/SiO2 samples were markedly more stable than the unencapsulated MAPB-QDs. The photoluminescence (PL) of the MAPB-QDs/SiO2 powders was maintained at 94.10% after 470 nm LED illumination for 7 h, which was much higher than the remnant PL (38.36%) of the pure MAPB-QD sample under a relative humidity of 60%. Similar test results were observed when the MAPB-QDs/SiO2 powders were incorporated into the poly(methyl methacrylate) films. The enhanced photostability is ascribed to the SiO2 barriers protecting the MAPB-QDs from degradation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Zhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Nontemplate Synthesis of CH3NH3PbBr3 Perovskite Nanoparticles
Schmidt, L. C., Pertegás, A., González-Carrero, S., Malinkiewicz, O., Agouram, S., Mínguez Espallargas, G., Bolink, H. J., Galian, R. E., & Pérez-Prieto, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4109209 · Cited by 1,327
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Huang, H., Susha, A. S., Kershaw, S. V., Hung, T. F., & Rogach, A. L. (2015) · Advanced Science · doi:10.1002/advs.201500194 · Cited by 617
Quantum-dot-in-perovskite solids
Ning, Z., Gong, X., Comin, R., Walters, G., Fan, F., Voznyy, O., Yassitepe, E., Buin, A., Hoogland, S., & Sargent, E. H. (2015) · Nature · doi:10.1038/nature14563 · Cited by 591
Robust, Non‐Cytotoxic, Silica‐Coated CdSe Quantum Dots with Efficient Photoluminescence
Selvan, S. T., Tan, T. T., & Ying, J. Y. (2005) · Advanced Materials · doi:10.1002/adma.200401960 · Cited by 473
Cited by
All-inorganic perovskite nanocrystal scintillators
Chen, Q., Wu, J., Ou, X., Huang, B., Almutlaq, J., Zhumekenov, A. A., Guan, X., Han, S., Liang, L., Yi, Z., et al. (2018) · Nature · doi:10.1038/s41586-018-0451-1 · Cited by 2,052
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationA Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Lead Halide Perovskite Nanocrystals in the Research Spotlight: Stability and Defect Tolerance
Huang, H., Bodnarchuk, M. I., Kershaw, S. V., Kovalenko, M. V., & Rogach, A. L. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00547 · Cited by 1,236
Wei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Efficient and Stable White LEDs with Silica‐Coated Inorganic Perovskite Quantum Dots
Sun, C., Zhang, Y., Ruan, C., Yin, C., Wang, X., Wang, Y., & Yu, W. W. (2016) · Advanced Materials · doi:10.1002/adma.201603081 · Cited by 934
Zou, S., Liu, Y., Li, J., Liu, C., Feng, R., Jiang, F., Li, Y., Song, J., Zeng, H., Hong, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04000 · Cited by 854
Dirin, D. N., Protesescu, L., Trummer, D., Kochetygov, I. V., Yakunin, S., Krumeich, F., Stadie, N. P., & Kovalenko, M. V. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02688 · Cited by 615
CsPbxMn1–xCl3 Perovskite Quantum Dots with High Mn Substitution Ratio
Liu, H., Wu, Z., Shao, J., Yao, D., Gao, H., Liu, Y., Yu, W., Zhang, H., & Yang, B. (2017) · ACS Nano · doi:10.1021/acsnano.6b08747 · Cited by 587
Photoelectrochemically Active and Environmentally Stable CsPbBr3/TiO2 Core/Shell Nanocrystals
Li, Z., Hofman, E., Li, J., Davis, A. H., Tung, C., Wu, L., & Zheng, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704288 · Cited by 565
Self-citationKong, Z.-C., Liao, J.-F., Dong, Y.-J., Xu, Y.-F., Chen, H.-Y., Kuang, D.-B., & Su, C.-Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01658 · Cited by 564
Protesescu, L., Yakunin, S., Kumar, S., Bär, J., Bertolotti, F., Masciocchi, N., Guagliardi, A., Grotevent, M., Shorubalko, I., Bodnarchuk, M. I., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b00116 · Cited by 534
Zhang, C., Wang, B., Li, W., Huang, S., Kong, L., Li, Z., & Li, L. (2017) · Nature Communications · doi:10.1038/s41467-017-01248-2 · Cited by 511
Self-citationColloidal lead halide perovskite nanocrystals: synthesis, optical properties and applications
Huang, H., Polavarapu, L., Sichert, J. A., Susha, A. S., Urban, A. S., & Rogach, A. L. (2016) · NPG Asia Materials · doi:10.1038/am.2016.167 · Cited by 497
Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices
Han, T., Tan, S., Xue, J., Meng, L., Lee, J., & Yang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803515 · Cited by 481
Levchuk, I., Osvet, A., Tang, X., Brandl, M., Perea, J. D., Hoegl, F., Matt, G. J., Hock, R., Batentschuk, M., & Brabec, C. J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04781 · Cited by 470
Improving the Stability of Metal Halide Perovskite Quantum Dots by Encapsulation
Lv, W., Li, L., Xu, M., Hong, J., Tang, X., Xu, L., Wu, Y., Zhu, R., Chen, R., & Huang, W. (2019) · Advanced Materials · doi:10.1002/adma.201900682 · Cited by 462
Self-citationMonodisperse Formamidinium Lead Bromide Nanocrystals with Bright and Stable Green Photoluminescence
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Bertolotti, F., Masciocchi, N., Guagliardi, A., & Kovalenko, M. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08900 · Cited by 460
Fan, Q., Biesold‐McGee, G. V., Ma, J., Xu, Q., Pan, S., Peng, J., & Lin, Z. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201904862 · Cited by 460
Lead halide perovskites for photocatalytic organic synthesis
Zhu, X., Lin, Y., San Martin, J., Sun, Y., Zhu, D., & Yan, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-10634-x · Cited by 455
Li, Z., Kong, L., Huang, S., & Li, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703264 · Cited by 433
Self-citationLyu, M., Yun, J., Chen, P., Hao, M., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602512 · Cited by 432
Zhang, H., Wang, X., Liao, Q., Xu, Z., Li, H., Zheng, L., & Fu, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604382 · Cited by 416
The surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Wei, Y., Deng, X., Xie, Z., Cai, X., Liang, S., Ma, P., Hou, Z., Cheng, Z., & Lin, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703535 · Cited by 394
Yuan, S., Chen, D., Li, X., Zhong, J., & Xu, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05155 · Cited by 383
Lead-Halide Perovskites for Photocatalytic α-Alkylation of Aldehydes
Zhu, X., Lin, Y., Sun, Y., Beard, M. C., & Yan, Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08720 · Cited by 361
Perovskite Quantum Dots and Their Application in Light‐Emitting Diodes
Wang, H., Bao, Z., Tsai, H., Tang, A., & Liu, R. (2018) · Small · doi:10.1002/smll.201702433 · Cited by 355
Halide Perovskites for Nonlinear Optics
Xu, J., Li, X., Xiong, J., Yuan, C., Semin, S., Rasing, T., & Bu, X. (2020) · Advanced Materials · doi:10.1002/adma.201806736 · Cited by 355
Perovskite Quantum Dots Glasses Based Backlit Displays
Lin, J., Lu, Y., Li, X., Huang, F., Yang, C., Liu, M., Jiang, N., & Chen, D. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02561 · Cited by 351
Li, F., Liu, Y., Wang, H., Zhan, Q., Liu, Q., & Xia, Z. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03442 · Cited by 339
Li, X., Zhang, W., Wang, Y.-C., Zhang, W., Wang, H.-Q., & Fang, J. (2018) · Nature Communications · doi:10.1038/s41467-018-06204-2 · Cited by 329
Synthesis, properties, and optical applications of low-dimensional perovskites
Zhang, Y., Liu, J., Wang, Z., Xue, Y., Ou, Q., Polavarapu, L., Zheng, J., Qi, X., & Bao, Q. (2016) · Chemical Communications · doi:10.1039/c6cc06425f · Cited by 303
Ye, Y., Zhang, W., Zhao, Z., Wang, J., Liu, C., Deng, Z., Zhao, X., & Han, J. (2019) · Advanced Optical Materials · doi:10.1002/adom.201801663 · Cited by 296
Growth mechanism of strongly emitting CH3NH3PbBr3 perovskite nanocrystals with a tunable bandgap
Huang, H., Raith, J., Kershaw, S. V., Kalytchuk, S., Tomanec, O., Jing, L., Susha, A. S., Zboril, R., & Rogach, A. L. (2017) · Nature Communications · doi:10.1038/s41467-017-00929-2 · Cited by 276
Guan, H., Zhao, S., Wang, H., Yan, D., Wang, M., & Zang, Z. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104279 · Cited by 276
Perovskite Nanocrystals as a Color Converter for Visible Light Communication
Dursun, I., Shen, C., Parida, M. R., Pan, J., Sarmah, S. P., Priante, D., Alyami, N., Liu, J., Saidaminov, M. I., Alias, M. S., et al. (2016) · ACS Photonics · doi:10.1021/acsphotonics.6b00187 · Cited by 272
Sun, J., Rabouw, F. T., Yang, X., Huang, X., Jing, X., Ye, S., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704371 · Cited by 267
Chen, K., Deng, X., Dodekatos, G., & Tüysüz, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06413 · Cited by 265
Highly stable CsPbBr3 quantum dots coated with alkyl phosphate for white light-emitting diodes
Xuan, T., Yang, X., Lou, S., Huang, J., Liu, Y., Yu, J., Li, H., Wong, K.-L., Wang, C., & Wang, J. (2017) · Nanoscale · doi:10.1039/c7nr04179a · Cited by 260
Photo-stability of CsPbBr3 perovskite quantum dots for optoelectronic application
Chen, J., Liu, D., Al-Marri, M. J., Nuuttila, L., Lehtivuori, H., & Zheng, K. (2016) · Science China Materials · doi:10.1007/s40843-016-5123-1 · Cited by 255
High-quality CsPbBr3 perovskite nanocrystals for quantum dot light-emitting diodes
Du, X., Wu, G., Cheng, J., Dang, H., Ma, K., Zhang, Y.-W., Tan, P.-F., & Chen, S. (2017) · RSC Advances · doi:10.1039/c6ra27665b · Cited by 255
Zhang, D., Xu, Y., Liu, Q., & Xia, Z. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b00355 · Cited by 254
Metadata
- Authors
- Huang, S., Li, Z., Kong, L., Zhu, N., Shan, A., & Li, L.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-05-02
- Volume
- 138
- Issue
- 18
- Pages
- 5749-5752
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2345372826
- Cited by
- 581
- References
- 20
- FWCI
- 35.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.