Observation of conducting filament growth in nanoscale resistive memories
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; 5 of the 42 sources its claims cite were checked for support.
Abstract
Nanoscale resistive switching devices, sometimes termed memristors, have recently generated significant interest for memory, logic and neuromorphic applications. Resistive switching effects in dielectric-based devices are normally assumed to be caused by conducting filament formation across the electrodes, but the nature of the filaments and their growth dynamics remain controversial. Here we report direct transmission electron microscopy imaging, and structural and compositional analysis of the nanoscale conducting filaments. Through systematic ex-situ and in-situ transmission electron microscopy studies on devices under different programming conditions, we found that the filament growth can be dominated by cation transport in the dielectric film. Unexpectedly, two different growth modes were observed for the first time in materials with different microstructures. Regardless of the growth direction, the narrowest region of the filament was found to be near the dielectric/inert-electrode interface in these devices, suggesting that this region deserves particular attention for continued device optimization.
Overview
CoChat Summary
## TL;DR
Using ex-situ and in-situ TEM, the paper directly visualizes conducting filaments in nanoscale resistive memories and shows that filament growth can be limited by cation transport in the dielectric. It also reports two growth modes, including an unexpected mode in which filaments start from the active electrode and grow toward the inert electrode.
## Key findings
- In over 100 devices studied, none showed more than one completed filament.
- For SiO2-based devices, the authors observed conical filaments with a typical lateral size of ~20 nm near the tip and ~70 nm at the base; the filaments were verified to be composed of elemental Ag.
- In a-Si-based devices, partially formed filaments were sometimes seen starting from the active Ag electrode, and detailed TEM/EDS/SAED showed they were also composed of elemental Ag, sometimes as a chain of nanoparticles separated by 1–4 nm gaps.
- Across device types, the narrowest region of the filament was found near the dielectric/inert-electrode interface, and erasing typically began there; in-situ TEM on vertical Ag/a-Si/W devices confirmed this active-electrode-to-inert-electrode growth and inert-interface dissolution.
## Methods
- The study combined ex-situ and in-situ transmission electron microscopy with structural and compositional analysis (TEM, STEM/HAADF, HRTEM, SAED, EDS) on resistive memory devices.
- Devices used different dielectric layers of about 15 nm thickness: SiO2, Al2O3, and a-Si; planar devices were fabricated on ultrathin 15 nm SiNx membranes, and vertical Ag/a-Si/W devices were used for in-situ TEM.
- Electrical switching was measured with current compliance; the main analysis related filament morphology and switching behavior to dielectric choice, programming current, electric field, and temperature, including 36 a-Si-based resistive switches for the field-scaling data.
## Limitations
- The authors state that the switching time and electric field used here are still different from standard ECM cell operating conditions, so the filament growth under specific conditions must be analyzed individually.
- The paper itself notes that detailed analysis of the electrochemical processes and cation transport dynamics remains for future investigation.
- Evident from the text: many conclusions are based on specific device geometries and materials under ex-situ/in-situ TEM conditions, so direct generalization to all resistive memories is not established in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
4 Valid · 1 Not valid · 15 Not checked · 77 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“In general, the filament growth is determined by three dynamic processes 27 : (i) the anodic dissolution of the metal component at the active electrode; (ii) the transport of the metal ions through the dielectrics; and (iii) the reduction of metal ions and the crystallization of conducting filaments.”
What the sources say
- Supportedcites [27] Valov, I., Waser, R., Jameson, J. R & Kozicki,, M. N. Electrochemical metallization memories — fundamentals, applications, prospects. Nanotechnol. 22, 254003 (2011). source
Split into 3 atoms — 3 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This effect explains the observations in ECM devices that lower threshold voltages are typically required during programming processes, compared with those for the initial forming process 22,27,28 .”
What the sources say
- Not checked — no full text of the sourcecites [22] Waser, R., Dittmann, R., Staikov, G. & Szot, K. Redox-based resistive switching memories - Nanoionic mechanisms, prospects, and challenges. Adv. Mater. 21, 2632–2663 (2009). source
- Partly supportedcites [27] Valov, I., Waser, R., Jameson, J. R & Kozicki,, M. N. Electrochemical metallization memories — fundamentals, applications, prospects. Nanotechnol. 22, 254003 (2011). sourceExperimental — accuracy not yet measured
Section 3.3 (page unavailable) distinguishes the initial forming cycle from later switching cycles and suggests that forming may leave a nano-channel that aids subsequent filament growth. This supports the proposed mechanism, but the passage does not state that programming threshold voltages are typically lower than forming voltages. (LLM, conf=0.78)
- Not checked — no full text of the sourcecites [28] Schindler, C., Staikov, G. & Waser, R. Electrode kinetics of Cu–SiO2-based resistive switching cells: Overcoming the voltage-time dilemma of electrochemical metallization memories. Appl. Phys. Lett. 94, 072109 (2009). source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the filaments in Fig. 1b apparently started growth from the inert electrode side as evidenced by the locations of the partially formed filaments.”
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“many of the incomplete filaments exhibiting a noteworthy dendrite structure with the branches pointing towards the active electrode”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“we provide unambiguous evidence that shows that localized, nanoscale filaments composed of elemental metals (and, in some cases, consisting of discrete nanoparticles instead of a solid wire) are formed during resistive switching.”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
51 more claims
Create a free account to see all 97 claims and every source verdict.
- It may state two separate claims as one. 36
- Probably not a substantial claim. 10
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The change from OFF to ON state is explained by the formation of a dominating Ag filament (15,16).”
From Stochastic memristive devices for computing and neuromorphic applications (2013) · cites this paper as [16]
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Jo, S. H., Chang, T., Ebong, I., Bhadviya, B. B., Mazumder, P., & Lu, W. (2010) · Nano Letters · doi:10.1021/nl904092h · Cited by 4,174
Self-citationMemristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Memristive devices and systems
Chua, L. O., & Kang, S. M. (1976) · Proceedings of the IEEE · doi:10.1109/proc.1976.10092 · Cited by 2,604
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
‘Memristive’ switches enable ‘stateful’ logic operations via material implication
Borghetti, J., Snider, G. S., Kuekes, P. J., Yang, J. J., Stewart, D. R., & Williams, R. S. (2010) · Nature · doi:10.1038/nature08940 · Cited by 1,929
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Cited by
Items 1,001–1,100 of 1,201
Robust DNA‐Bridged Memristor for Textile Chips
Xu, X., Zhou, X., Wang, T., Shi, X., Liu, Y., Zuo, Y., Xu, L., Wang, M., Hu, X., Yang, X., et al. (2020) · Angewandte Chemie · doi:10.1002/ange.202004333 · Cited by 5
Dwivedi, A., Saini, S., Lodhi, A., Agarwal, H., & Tiwari, S. P. (2022) · IEEE International Conference on Emerging Electronics (ICEE) · doi:10.1109/icee56203.2022.10117866 · Cited by 2
Towards Printed Conductive-Bridge Memory Devices Based on Mesoporous SiO2 Film
Mamberti, R., Benevent, E., Bocquet, M., Grosso, D., Fiorido, T., & Putero, M. (2023) · 2023 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) · doi:10.1109/fleps57599.2023.10220375 · Cited by 2
“The compliance current has been fixed at this value to avoid volatile behavior that could be observed at currents below 100μA [7], [34], [35] and also prevents from irreversible breakdown of the cells upon forming.”
BackgroundIn situ observation of indium filament growth dynamics in ITO electrode-based memristor
Ye, C., Xu, Y., Li, Y., & Qian, K. (2023) · Applied Physics Letters · doi:10.1063/5.0167669 · Cited by 2
FABRICATION AND STUDY OF THE p − Si/α − Si/Ag MEMRISTOR CROSSBAR ARRAY
Samsonova, A., Yegiyan, S., Klimenko, O. A., et al. (2024) · Журнал Экспериментальной и Теоретической Физики · doi:10.31857/s004445102408011x · Cited by 2
Frequency synaptic behavior of ZnO/HfZrO memristor with pulsed stimuli
Lu, J., Xiang, Z., Wang, K., Wang, Z., Shi, S., Liu, Z., Chen, X., Hu, X., & Jiang, R. (2024) · Applied Physics Letters · doi:10.1063/5.0224947 · Cited by 3
Parallel conducting filaments in resistive switching ZnO thin films
Liu, T.-M., Wu, Z.-W., Chien, T.-A., Yang, P.-Q., Hsu, H., & Lo, F.-Y. (2024) · AIP Advances · doi:10.1063/5.0232595 · Cited by 2
Korostylev, E. V., Zhuk, M. Y., Saveleva, E. O., Korobkin, E. N., Mutaev, I., & Chernikova, А. G. (2024) · Vacuum · doi:10.1016/j.vacuum.2024.113908 · Cited by 2
Sanjay, S., Arackal, S., Paruthi, A., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c16251 · Cited by 2
Modeling memristor switching behavior through phase-delay cluster analysis
Zhevnenko, D. A., Meshchaninov, F. P., Belov, A. I., et al. (2025) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2025.116447 · Cited by 2
Dash, B., Kumar, A., Kim, H. M., et al. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c00862 · Cited by 2
Spike-Timing-Dependent-Plasticity in Hybrid Memristive-CMOS Spiking Neuromorphic Systems
Serrano‐Gotarredona, T., & Linares-Barranco, B. (2013) · Springer eBooks · doi:10.1007/978-1-4614-9068-5_12 · Cited by 2
Resistive switching characteristic of electrolyte-oxide-semiconductor structures
Chen, X., Wang, H., Sun, G., Ma, X., Gao, J., & Wu, W. (2017) · Journal of Semiconductors · doi:10.1088/1674-4926/38/8/084003 · Cited by 2
Synthesis and Characterization of Micro-Thick TiO2 and HfO2 Memristors
Abunahla, H., & Mohammad, B. S. (2017) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-319-65699-1_2 · Cited by 2
Advent of memristor based synapses on neuromorphic engineering
Vidya, S., & Ahmed, M. R. (2017) · International Conference on Microelectronic Devices, Circuits and Systems (ICMDCS) · doi:10.1109/icmdcs.2017.8211706 · Cited by 2
“Ting Chang,Yuchao Yang and Wei Lu discussed that nanoscale memristive devices are the recent growth in neuromorphic hardware [8].”
BackgroundEifediyi, E. K., Ogedegbe, F. O., Izuogu, N. B., et al. (2018) · Cercetari Agronomice in Moldova · doi:10.2478/cerce-2018-0036 · Cited by 2
Liu, L., Wang, Y., Lin, Y., et al. (2020) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/ab7b46 · Cited by 2
Composite interfaces and electrode properties of resistive random access memory devices
Jin, Y., Mao-Xiu, Z., Tai-Long, X., Yue-Hua, D., Jia-Yu, W., Luo, J., Hui-Fang, X., Jiang, X., & Jun-ning, C. (2013) · Acta Physica Sinica · doi:10.7498/aps.62.248501 · Cited by 2
Memristive Computing Devices and Applications
Zidan, M. A., Chen, A., Indiveri, G., & Lu, W. D. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_2 · Cited by 2
Self-citationWang, P., Xu, F., Gao, P. D., Cai, S., & Bai, X. (2023) · Springer eBooks · doi:10.1007/978-981-19-6845-7_6 · Cited by 2
Self-citationElectric modulation of anisotropic magnetoresistance in Pt/HfO2–x /NiO y /Ni heterojunctions
Ye, X., Zhu, X., Yang, H., Duan, J., Sun, C., & Li, R. (2023) · Chinese Physics B · doi:10.1088/1674-1056/acd2b6 · Cited by 2
Novel materials and methods for fabricating memristors for use in RF applications
Tsipas, E., Stavroulakis, E., Chatzipaschalis, I. K., Rallis, K., Vasileiadis, N., Dimitrakis, P., Kostopoulos, A., Konstantinidis, G., & Sirakoulis, G. C. (2023) · IEEE Nanotechnology Materials and Devices Conference (NMDC) · doi:10.1109/nmdc57951.2023.10344142 · Cited by 2
“In the planar topology, two electrodes (active and inert) are positioned on a thick dielectric layer with an air gap [20], [21] or a metal ion conductor in between [21].”
BackgroundAn atomic switch using oxygenated amorphous carbon as solid electrolyte
Xu, H., Wang, Q., Ma, Y., Dang, H., Guo, P., Yang, H., & He, D. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aaf265 · Cited by 2
Oxide nanowires for nonvolatile memory applications
Nagashima, K., & Yanagida, T. (2015) · Elsevier eBooks · doi:10.1016/b978-0-08-100164-6.00016-3 · Cited by 3
The Effects of Radiation on Memristor-Based Electronic Spiking Neural Networks
Dahl, S. G. (2020) · doi:10.18122/td/1713/boisestate · Cited by 1
Two‐Terminal Neuromorphic Memristors
He, H., Huang, H., & Yang, R. (2021) · Wiley eBooks · doi:10.1002/9783527835317.ch1 · Cited by 5
Cao, J., Lv, Z. L., Wang, H. W., Wu, J., Lin, K., Li, Q., Chen, X., Li, X. H., Li, Q. H., Cao, Y. L., et al. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107337 · Cited by 1
Li, Y., Xu, P., Lv, Y., et al. (2024) · Nanoscale · doi:10.1039/d4nr01546k · Cited by 1
Memristor-based Bayesian spiking neural network for IBD diagnosis
Li, X., Wu, Q., Chen, Y., Jin, Y., Ma, J., & Yang, J. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2024.112099 · Cited by 1
Vibration may Break the Conductive Filament in amorphous Germanium based Memristor
Li, Z., Börner, P. D., Müller, M., Bablich, A., Bolívar, P. H., & Choubey, B. (2024) · IEEE International Conference on Artificial Intelligence Circuits and Systems (AICAS) · doi:10.1109/aicas59952.2024.10595884 · Cited by 1
“Electrochemical metallization (ECM) is a redox mechanism that enables memristive function through the formation of a conductive filament [10].”
BackgroundNanogap resistive switch mechanism study and performance degradation analysis
Yu, D., Tian, Z., Ren, L., & Fu, Y. (2024) · Applied Physics Letters · doi:10.1063/5.0216864 · Cited by 1
Sahu, M. C., Padhi, P. S., Mallik, S. K., Roy, S., Sahoo, S., Banik, S., Sharma, R. K., Misra, P., & Sahoo, S. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c00694 · Cited by 2
Kim, J. I., Kim, Y. K., Jang, B. C., et al. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c00420 · Cited by 1
Resistive Switching in Nanoparticle-Based Nanocomposites
Carstens, N., Adejube, B., Tjardts, T., Gupta, R., Strunskus, T., Faupel, F., Hassanien, A., & Vahl, A. (2025) · Recent Patents on Nanotechnology · doi:10.2174/0118722105319247250606185502 · Cited by 1
Oxygen vacancies driven filamentary resistive switching in oxide-based memristive devices
Martir, R. L., Jagla, E. A., Rubi, D., & Sánchez, M. J. (2025) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/adf652 · Cited by 4
Optimized thickness on resistivity switching of the solution-derived HfO2 device
Liu, M., Zhang, Y.-C. S. L.-G., Wang, Y., et al. (2025) · Journal of Applied Physics · doi:10.1063/5.0289559 · Cited by 1
Zero-Static-Power Beamforming Antenna Array Enabled by RF Memristive Switches
Xiao, X., Ren, Z., Zhang, Y., Qu, T., & Hu, Z. (2025) · Digest - IEEE Antennas and Propagation Society. International Symposium · doi:10.1109/ap-s/cnc-usnc-ursi55537.2025.11266795 · Cited by 1
“The filament fabrication process can be seen in [16].”
Fast prototyping of memristors for ReRAMs and neuromorphic computing
Marraccini, G., Strangio, S., Dimaggio, E., Sargeni, R., Pieri, F., Sozen, Y., Castellanos-Gómez, A., & Fiori, G. (2025) · Nanoscale · doi:10.1039/d5nr02690c · Cited by 3
A comprehensive study on resistive random access memory based true random number generators
Zahoor, F. (2025) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2025.110901 · Cited by 2
Resistive switching properties of metal/Bi2Sr2CaCu2O8+δ heterostructures
Lu, Y., Jia, J., Mi, T., & Li, L. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.01.086 · Cited by 1
Ultra‐Low Electric Field Induced Volatile Resistive Switching in Hole‐Doped MgTi 2 O 4
Maji, P., Rahaman, A., Dey, J. K., Chowdhury, S., Paria, S., Hoesch, M., Chaudhuri, A. R., & Choudhury, D. (2026) · Advanced Materials · doi:10.1002/adma.202518981 · Cited by 1
Brain-Inspired Reservoir Computing with Dynamic Memristors for Audio-Visual Emotion Recognition
Wan, S., Wang, Y., Chen, H., Qian, R., Li, S., Xu, R., & Chen, X. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c23369 · Cited by 1
Parveen, S., Bhatt, N., Whab, A., Raza, M. M. H., Madhavan, V. E., & Pumlianmunga (2026) · Materials Science and Engineering B · doi:10.1016/j.mseb.2026.119283 · Cited by 1
Indirect Laser Metal Deposition Unexpectedly Stabilises Amorphous Germanium Memristors
Li, Z., Raza, S. M., Börner, P. D., et al. (2026) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2026.3663465 · Cited by 1
Electrically tunable nonlinear light generation in plasmonic tunnel junctions
Tang, Y., Prakash, S., Allen, M., Allen, J., Ariando, A., Agrawal, A., & Harutyunyan, H. (2026) · Optica · doi:10.1364/optica.585277 · Cited by 1
Ju, S., & Kim, S. (2026) · Journal of Materials Chemistry C · doi:10.1039/d6tc00138f · Cited by 1
Role of the orthorhombic phase in endurance degradation of Hf0.5Zr0.5O2 memristors
Park, J.-C., Seol, W., Baek, S., Lee, D., Park, S. M., Kim, S. J., Kim, Y.-M., Jeong, H. Y., Jo, J. Y., & Lee, S. (2026) · Journal of Materiomics · doi:10.1016/j.jmat.2026.101212 · Cited by 1
Memristive Physical Reservoir Computing
Jiao, D., Wang, Z., Wang, J., Zhang, L., Wei, X., Hu, L., Li, Z., Vasilakos, A. V., Ye, Z., & Zhuge, F. (2026) · Advanced Science · doi:10.1002/advs.75476 · Cited by 6
“Within this framework, the conductive filament model stands as a widely recognized theory of resistive switching, and its formation has been experimentally observed directly [ 131 ].”
Chen, Y., Wang, Y. W., Hong, Z., et al. (2026) · Advanced Science · doi:10.1002/advs.75508 · Cited by 1
“…oxides [ 10, 11 ]; electrochemical metallization (ECM), governed by the formation and rupture of metallic filaments Through cation migration [ 12, 13 ]; and topotactic phase-transition (perovskite– brownmillerite) in which resistance changes arise From structural transformations in the…”
2D Materials Powering Neuromorphic Intelligence
Kazmi, J., Ahmad, W., Naqi, M., Abbas, Y., Abbas, A., Wang, P., Mohamed, M. A., Rosei, F., Wang, Z., & Song, H. (2026) · Nano-Micro Letters · doi:10.1007/s40820-026-02253-1 · Cited by 2
Advanced methodologies for atomic-scale nanofabrication and dynamic characterization
Wu, X. Y., & Sun, L. (2013) · IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) · doi:10.1109/ipfa.2013.6599188 · Cited by 1
Focus ion beam-induced mechanical stress switching in an ultra-fast resistive switching device
Yang, X. Y. (2016) · Applied Physics A · doi:10.1007/s00339-016-0109-5 · Cited by 1
Conductive Filaments: Formation, Observation and Manipulation
Celano, U. (2016) · Springer theses · doi:10.1007/978-3-319-39531-9_4 · Cited by 1
Miniaturization and Integration of Organic Resistive Memory Devices
Song, Y., Yoo, D., & Lee, T. (2018) · Journal of the Korean Physical Society · doi:10.3938/jkps.73.479 · Cited by 1
Effect of N Concentration Upon Resistive Switching Behavior of Au/Ni/TaON/NiSi ECM Devices
Park, J., Jeon, H., Jang, W., Kim, H. J., Kim, H., & Jeon, H. (2018) · physica status solidi (a) · doi:10.1002/pssa.201800181 · Cited by 1
Neuromorphic Devices and Networks Based on Memristors with Ionic Dynamics
Yang, Y., Ke, Y., & Huang, R. (2019) · Springer eBooks · doi:10.1007/978-3-319-76375-0_18 · Cited by 1
Self-citationYue-Hua, D., Zhi-Yong, P., Chen, Z., Wang, F., Ning, L., Bo, J., & Li, X. (2016) · Acta Physica Sinica · doi:10.7498/aps.65.073101 · Cited by 1
Kumari, C., Varun, I., Pal, M., et al. (2019) · IEEE Nanotechnology Materials and Devices Conference (NMDC) · doi:10.1109/nmdc47361.2019.9083989 · Cited by 1
“However, when active or oxidizing metals are used as top contacts in RRAM, the filament formation is commonly attributed to the migration of TE metal ions [10][11].”
BackgroundTwo-terminal optoelectronic memory device
Zhao, X., Wang, Z., Xu, H., & Liu, Y. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819717-2.00004-7 · Cited by 3
Memristive Devices and Circuits
Erokhin, V. V. (2021) · Springer eBooks · doi:10.1007/978-3-030-79492-7_1 · Cited by 1
Percolation theory based model of conduction mechanism and characteristic contradiction in ZnO RRAM
Qi, H., Hu, C. F., Wang, Y., Ali, S., Hu, J., Bai, N., Wang, Q., Qi, J., & He, D. (2021) · Applied Physics Letters · doi:10.1063/5.0069763 · Cited by 1
Preface to Special Topic: Piezoresponse force microscopy and nanoscale phenomena in polar materials
Bassiri‐Gharb, N., Kalinin, S. V., & Nagarajan, V. (2014) · Journal of Applied Physics · doi:10.1063/1.4891444 · Cited by 1
Zhang, L., Tang, Y., Gu, L., et al. (2023) · Springer eBooks · doi:10.1007/978-981-19-6845-7_5 · Cited by 1
An FPGA-Based Training System for a 1T1R Memristor Array With 500 nS Conductance Resolution Limit
Li, L., Cheng, C., Huang, B., Ding, K., Li, Y., & Guo, G. (2023) · IEEE Access · doi:10.1109/access.2023.3322034 · Cited by 1
“A newly fabricated memristor device needs to undergo the Forming process to form conductive filaments [33].”
MethodFast and broadband spatial‐photoresistance modulation in graphene–silicon heterojunctions
Du, R., Wang, W., Lin, H., et al. (2024) · Nanophotonics · doi:10.1515/nanoph-2024-0084 · Cited by 1
Learning Model Based on Electrochemical Metallization Memristor with Cluster Residual Effect
Sun, Q., & Chen, G. (2024) · physica status solidi (b) · doi:10.1002/pssb.202400170 · Cited by 1
Hyperplane tree-based data mining with a multi-functional memristive crossbar array
Cheong, S., Shin, D. H., Lee, S. H., Jang, Y. H., Han, J., Shim, S. K., Han, J., Ghenzi, N., & Hwang, C. S. (2024) · Materials Horizons · doi:10.1039/d4mh00942h · Cited by 3
Influence of rapid thermal annealing in vacuum on the resistive switching of Cu/ZnO/ITO devices
Liu, T.-M., Wu, Z.-W., Lee, C.-C., Yang, P.-Q., Hsu, H., & Lo, F.-Y. (2024) · AIP Advances · doi:10.1063/5.0241913 · Cited by 1
3D Stacking Enabled Non‐Volatile Multi‐Level Optically/Electrically Writeable/Readable Memory
Ho, C.-C., Chao, Y., Lin, J., Wu, J., Lai, M., Hsu, F., Shen, J., & Chen, Y. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202401428 · Cited by 2
Hu, H., Peng, J., Liu, G., Yu, S., Zhao, Z., zhang, Y., Zhang, C., Li, Z., Li, Z., Liu, H., et al. (2025) · Integration · doi:10.1016/j.vlsi.2025.102420 · Cited by 1
Nanoionics driven reconfigurable heterojunctions for advanced information devices
Ye, X., Chen, K., Hu, C., et al. (2025) · Applied Physics Letters · doi:10.1063/5.0268254 · Cited by 1
TaOx-based bifunctional memristor for compact leaky integrate-and-fire neuron
Cao, L., Luo, Y., Cheng, X., & Miao, X. (2025) · Applied Physics Letters · doi:10.1063/5.0277028 · Cited by 1
Sevic, J. F., Juston, A. L., & Kobayashi, N. P. (2025) · Applied Physics Letters · doi:10.1063/5.0290458 · Cited by 1
“Associated with valance change mechanisms is spontaneous production of a characteristic nanoscale morphology, often referred to as a conducting filament, reflecting ionic motion and redistribution within the host thin film [31][32][33].”
Origin of stochastic resistive switching in devices with phenomenologically identical initial states
Li, Q., Khiat, A., Salaoru, I., Xu, H. F., & Prodromakis, T. (2014) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2014.6865413 · Cited by 1
“Irrespectively to the intrinsic conductive mechanism, the forming and rupturing of conductive filaments was demonstrated to be the functional mechanism within Metal-Insulator-Metal (MIM) ReRAM cells [11], [16].”
BackgroundPace, G., Caranzi, L., Bucella, S. G., et al. (2014) · Nanoscale · doi:10.1039/c4nr05142d · Cited by 1
Electrolyte-oxide-semiconductor structures as pH sensors based on resistive-switching characteristic
Wang, H., Chen, Z., Chen, X., et al. (2016) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.2016.7421775 · Cited by 1
Memristors for Memory and Computing Applications
Yang, Y. (2017) · International Photonics and Optoelectronics Meetings · doi:10.1364/isst.2017.isu4b.1 · Cited by 1
Self-citation有田正志, Tsurumaki‐Fukuchi, A., & Takahashi, Y. (2018) · InTech eBooks · doi:10.5772/intechopen.69024 · Cited by 1
“SET-1 is categorized as this type as reported in ZrO2 [27], SiO2 [28] and WOx [42].”
BackgroundInfluentialNi(OH) 2 based dual-mode memristor
Fan, X., Zhou, F., Shao, H., et al. (2020) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ab7d4b · Cited by 1
Electronic mechanism for resistive switching in metal/insulator/metal nanodevices
Raebiger, H., Padilha, A. C. M., Rocha, A. R., & Dalpian, G. M. (2020) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab7a58 · Cited by 2
“For example, conical regions of oxygen deficient Magnéli phases have been observed in TiO2 memristors, and chain like structures of metal impurity atoms have been observed in conductive bridging random access memory (CBRAM) devices [52, 53].”
BackgroundIn situ transmission electron microscopy studies on nanomaterials and HfO2-based storage nanodevices
Li, C., Yuan, Y., Yang, Y., Xi, S., Gao, B., Zongliang, H., Kang, J., Ming, L., & Yu, R. (2018) · Acta Physica Sinica · doi:10.7498/aps.67.20180731 · Cited by 1
Self-citationElectrochemical reaction in memristor devices in a set state
Guo, H., Liu, X., Gao, X., Yin, K., Yin, J., Xia, Y., Liu, Z. G., & Sun, L. (2021) · AIP Advances · doi:10.1063/5.0033613 · Cited by 1
Resistive Random Access Memory Device Physics and Array Architectures
Zhuo, V. Y.-Q., Chen, Z., & Chui, K. J. (2021) · Springer eBooks · doi:10.1007/978-981-15-6912-8_10 · Cited by 3
Peng, H. (2020) · Springer eBooks · doi:10.1007/978-981-15-9945-3_11 · Cited by 2
Tsuruoka, T., Hasegawa, T., Terabe, K., & Aono, M. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_10 · Cited by 1
Ke, Q., & Dai, Y. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac6f36 · Cited by 1
The Spectral Response of the Dual Microdisk Resonator Based on BaTiO3 Resistive Random Access Memory
Chuang, R. W., Liu, B., & Huang, C. (2022) · Micromachines · doi:10.3390/mi13081175 · Cited by 1
Chemical vapor deposition of hexagonal boron nitride and its use in electronic devices
Hui, F. (2018) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · doi:10.48550/arxiv.1905.06938 · Cited by 1
“broken bonds between the atoms that form the dielectric or atoms that penetrate from adjacent electrodes) [53].”
BackgroundLiao, Z., Fu, J., & Wang, J. (2020) · Research Square · doi:10.21203/rs.3.rs-49761/v1 · Cited by 2
Adesina, N. O. (2022) · Louisiana State University · doi:10.31390/gradschool_dissertations.5771 · Cited by 1
Wang, J., Chiu, C.-H., Chan, Y., & Lai, C. (2015) · IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) · doi:10.1109/ipfa.2015.7224455
Sun, H., Liu, Q., Long, S., et al. (2014) · doi:10.1109/vlsi-tsa.2014.6839677
Transition metal oxide based resistive RAM for high density non-vilatile memory
Tran, X. A. (2013) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/54826
Characterizations and understanding of conducting filaments in resistive switching devices
Yang, Y., & Lu, W. D. (2015) · IEEE International Conference on Nanotechnology (IEEE-NANO) · doi:10.1109/nano.2015.7388841
“from the inert electrode and active electrode, respectively.(6) Such results imply that the ion mobility plays an important role in determining the filament growth dynamics.”
BackgroundSelf-citationThree-Dimensional Filament Observation
Celano, U. (2016) · Springer theses · doi:10.1007/978-3-319-39531-9_5
Celano, U. (2016) · Springer theses · doi:10.1007/978-3-319-39531-9_6
Investigation on Switching Operation in Resistive RAM Using In-Situ TEM
有田正志, & Takahashi, Y. (2016) · Springer proceedings in physics · doi:10.1007/978-3-319-46601-9_24
Device applications of transition metal oxide thin films
Li, H. K. (2016) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/69411
Nanoscale Photodetector and Optical Modulator for Future Optical Interconnect Systems.
Otuonye, U. (2016) · Deep Blue (University of Michigan)
Emulations of synaptic plasticity in the planar transistor configuration for neuromorphic computing
Chen, Y., Zhang, C., LaiYuan, W. A. N. G., Li, T., Ying, Z. H. U., MingDong, Y. I., & Huang, W. (2017) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/n972016-01359
Metadata
- Authors
- Yang, Y., Gao, P., Gaba, S., Chang, T., Pan, X., & Lu, W.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Lu, Wei
- Venue
- Nature Communications
- Published
- 2012-03-13
- Volume
- 3
- Issue
- 1
- Pages
- 732-732
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2043707274
- Cited by
- 1,208
- References
- 32
- Citations by year
- 2026: 68 · 2025: 69 · 2024: 92 · 2023: 84 · 2022: 95 · 2021: 85 · 2020: 101 · 2019: 100 · 2018: 89 · 2017: 95 · 2016: 88 · 2015: 81 · 2014: 71 · 2013: 68 · 2012: 21
- FWCI
- 49.24
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Nature Communications (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- National Science Foundation (0723032, 0907191, 0954621)
- Defense Advanced Research Projects Agency (HRL0011-09-C-001)
- Division of Materials Research (0723032, DMR-0723032)
- Division of Electrical, Communications and Cyber Systems (ECCS-0954621)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive switching, memristors, electrochemical metallization, cation transport, dielectric films, non-volatile memory, in situ transmission electron microscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.