The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; 5 of the 42 sources its claims cite were checked for support.
Observation of conducting filament growth in nanoscale resistive memories
Open accessAbstract
Nanoscale resistive switching devices, sometimes termed memristors, have recently generated significant interest for memory, logic and neuromorphic applications. Resistive switching effects in dielectric-based devices are normally assumed to be caused by conducting filament formation across the electrodes, but the nature of the filaments and their growth dynamics remain controversial. Here we report direct transmission electron microscopy imaging, and structural and compositional analysis of the nanoscale conducting filaments. Through systematic ex-situ and in-situ transmission electron microscopy studies on devices under different programming conditions, we found that the filament growth can be dominated by cation transport in the dielectric film. Unexpectedly, two different growth modes were observed for the first time in materials with different microstructures. Regardless of the growth direction, the narrowest region of the filament was found to be near the dielectric/inert-electrode interface in these devices, suggesting that this region deserves particular attention for continued device optimization.
Overview
CoChat Summary
## TL;DR
Using ex-situ and in-situ TEM, the paper directly visualizes conducting filaments in nanoscale resistive memories and shows that filament growth can be limited by cation transport in the dielectric. It also reports two growth modes, including an unexpected mode in which filaments start from the active electrode and grow toward the inert electrode.
## Key findings
- In over 100 devices studied, none showed more than one completed filament.
- For SiO2-based devices, the authors observed conical filaments with a typical lateral size of ~20 nm near the tip and ~70 nm at the base; the filaments were verified to be composed of elemental Ag.
- In a-Si-based devices, partially formed filaments were sometimes seen starting from the active Ag electrode, and detailed TEM/EDS/SAED showed they were also composed of elemental Ag, sometimes as a chain of nanoparticles separated by 1–4 nm gaps.
- Across device types, the narrowest region of the filament was found near the dielectric/inert-electrode interface, and erasing typically began there; in-situ TEM on vertical Ag/a-Si/W devices confirmed this active-electrode-to-inert-electrode growth and inert-interface dissolution.
## Methods
- The study combined ex-situ and in-situ transmission electron microscopy with structural and compositional analysis (TEM, STEM/HAADF, HRTEM, SAED, EDS) on resistive memory devices.
- Devices used different dielectric layers of about 15 nm thickness: SiO2, Al2O3, and a-Si; planar devices were fabricated on ultrathin 15 nm SiNx membranes, and vertical Ag/a-Si/W devices were used for in-situ TEM.
- Electrical switching was measured with current compliance; the main analysis related filament morphology and switching behavior to dielectric choice, programming current, electric field, and temperature, including 36 a-Si-based resistive switches for the field-scaling data.
## Limitations
- The authors state that the switching time and electric field used here are still different from standard ECM cell operating conditions, so the filament growth under specific conditions must be analyzed individually.
- The paper itself notes that detailed analysis of the electrochemical processes and cation transport dynamics remains for future investigation.
- Evident from the text: many conclusions are based on specific device geometries and materials under ex-situ/in-situ TEM conditions, so direct generalization to all resistive memories is not established in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
4 Valid · 1 Not valid · 15 Not checked · 77 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“In general, the filament growth is determined by three dynamic processes 27 : (i) the anodic dissolution of the metal component at the active electrode; (ii) the transport of the metal ions through the dielectrics; and (iii) the reduction of metal ions and the crystallization of conducting filaments.”
What the sources say
- Supportedcites [27] Valov, I., Waser, R., Jameson, J. R & Kozicki,, M. N. Electrochemical metallization memories — fundamentals, applications, prospects. Nanotechnol. 22, 254003 (2011). source
Split into 3 atoms — 3 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This effect explains the observations in ECM devices that lower threshold voltages are typically required during programming processes, compared with those for the initial forming process 22,27,28 .”
What the sources say
- Not checked — no full text of the sourcecites [22] Waser, R., Dittmann, R., Staikov, G. & Szot, K. Redox-based resistive switching memories - Nanoionic mechanisms, prospects, and challenges. Adv. Mater. 21, 2632–2663 (2009). source
- Partly supportedcites [27] Valov, I., Waser, R., Jameson, J. R & Kozicki,, M. N. Electrochemical metallization memories — fundamentals, applications, prospects. Nanotechnol. 22, 254003 (2011). sourceExperimental — accuracy not yet measured
Section 3.3 (page unavailable) distinguishes the initial forming cycle from later switching cycles and suggests that forming may leave a nano-channel that aids subsequent filament growth. This supports the proposed mechanism, but the passage does not state that programming threshold voltages are typically lower than forming voltages. (LLM, conf=0.78)
- Not checked — no full text of the sourcecites [28] Schindler, C., Staikov, G. & Waser, R. Electrode kinetics of Cu–SiO2-based resistive switching cells: Overcoming the voltage-time dilemma of electrochemical metallization memories. Appl. Phys. Lett. 94, 072109 (2009). source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the filaments in Fig. 1b apparently started growth from the inert electrode side as evidenced by the locations of the partially formed filaments.”
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“many of the incomplete filaments exhibiting a noteworthy dendrite structure with the branches pointing towards the active electrode”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“we provide unambiguous evidence that shows that localized, nanoscale filaments composed of elemental metals (and, in some cases, consisting of discrete nanoparticles instead of a solid wire) are formed during resistive switching.”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
51 more claims
Create a free account to see all 97 claims and every source verdict.
- It may state two separate claims as one. 36
- Probably not a substantial claim. 10
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The change from OFF to ON state is explained by the formation of a dominating Ag filament (15,16).”
From Stochastic memristive devices for computing and neuromorphic applications (2013) · cites this paper as [16]
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Jo, S. H., Chang, T., Ebong, I., Bhadviya, B. B., Mazumder, P., & Lu, W. (2010) · Nano Letters · doi:10.1021/nl904092h · Cited by 4,174
Self-citationMemristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Memristive devices and systems
Chua, L. O., & Kang, S. M. (1976) · Proceedings of the IEEE · doi:10.1109/proc.1976.10092 · Cited by 2,604
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
‘Memristive’ switches enable ‘stateful’ logic operations via material implication
Borghetti, J., Snider, G. S., Kuekes, P. J., Yang, J. J., Stewart, D. R., & Williams, R. S. (2010) · Nature · doi:10.1038/nature08940 · Cited by 1,929
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Cited by
Items 601–700 of 1,201
Lim, D.-H., Kim, G., Song, J. H., et al. (2014) · RSC Advances · doi:10.1039/c4ra09443c · Cited by 19
Unconventional Inorganic‐Based Memristive Devices for Advanced Intelligent Systems
Sung, S. H., Kim, D. H., Kim, T., Kang, I., & Lee, K. J. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900080 · Cited by 20
A write-once-read-many-times memory based on a sol-gel derived copper oxide semiconductor
Hsu, C.-C., Tsai, J.-E., & Lin, Y.-S. (2019) · Physica B Condensed Matter · doi:10.1016/j.physb.2019.03.007 · Cited by 19
Ultrafast degradable resistive switching memory based on α-lactose thin films
Guo, Y., Hu, W. H., Zeng, F., Zhang, C., Peng, Y., & Guo, Y. (2020) · Organic Electronics · doi:10.1016/j.orgel.2020.105750 · Cited by 21
Mao, S., Zhang, X., Zhou, G., Chen, Y., Ke, C., Zhou, W. J., Sun, B. T., & Zhao, Y. X. (2021) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.1c00951 · Cited by 19
Bousoulas, P., Tsioustas, C., Hadfield, J., Aslanidis, V., Limberopoulos, S., & Tsoukalas, D. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3160140 · Cited by 19
Vertical integration of memristors onto foundry CMOS dies using wafer-scale integration
Rofeh, J., Sodhi, A., Payvand, M., Lastras-Montaño, M. Á., Ghofrani, A., Madhavan, A., Yemenicioglu, S., Cheng, K.-T. T., & Theogarajan, L. S. (2015) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2015.7159710 · Cited by 20
“electric field drives the Ag cations to the opposing Pt electrode, where they are reduced to form a Ag filament [32],”
BackgroundResultHuang, Y.-H., Chen, H.-A., Wu, H.-H., & Hsieh, T.-E. (2015) · Journal of Applied Physics · doi:10.1063/1.4905546 · Cited by 20
Highly uniform resistive switching in SiN nanorod devices fabricated by nanosphere lithography
Shin, H. W., Park, J. H., Chung, H. Y., et al. (2014) · Applied Physics Express · doi:10.7567/apex.7.024202 · Cited by 19
Forming-free resistive switching characteristics of Ag/CeO 2 /Pt devices with a large memory window
Zheng, H., Kim, H. J., Yang, P., et al. (2017) · Semiconductor Science and Technology · doi:10.1088/1361-6641/aa6379 · Cited by 19
Optically reversible electrical soft-breakdown in wide-bandgap oxides—A factorial study
Zhou, Y., Ang, D. S., & Kalaga, P. S. (2018) · Journal of Applied Physics · doi:10.1063/1.5002606 · Cited by 19
Zivasatienraj, B., Tellekamp, M. B., Weidenbach, A. S., Ghosh, A., McCrone, T. M., & Doolittle, W. A. (2020) · Journal of Applied Physics · doi:10.1063/1.5138193 · Cited by 19
Wells, R. A., & Robertson, A. W. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202400121 · Cited by 19
Chou, C.-Y., Lee, W.-H., Chuu, C., et al. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c00823 · Cited by 18
Self‐repairable, high‐uniform conductive‐bridge random access memory based on amorphous NbSe2
Lu, B., Hu, D., Yang, R., Du, J., Hu, L., Li, S., Wang, F., Huang, J., Liu, P., Zhuge, F., et al. (2023) · SmartMat · doi:10.1002/smm2.1240 · Cited by 19
Kudo, M., 有田正志, Ohno, Y., Fujii, T., Hamada, K., & Takahashi, Y. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.10.102 · Cited by 18
Investigation of the resistive switching in AgxAsS2 layer by conductive AFM
Zhang, B., Kutálek, P., Knotek, P., et al. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.04.152 · Cited by 18
Real-time observation of filamentary conduction pathways in Ca-doped BiFeO3
Park, H., Lim, J. S., Suh, J., & Yang, C. (2019) · Applied Physics Letters · doi:10.1063/1.5124892 · Cited by 18
Wlaźlak, E., Przyczyna, D., Gutierrez, R., Cuniberti, G., & Szacilowski, K. T. (2020) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ab7e11 · Cited by 19
Zhang, Z., Chen, A., Ma, G., He, Y., Lin, C., Lin, C.-C., Wang, H., & Chang, T. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.2993771 · Cited by 18
“affected the size of the conductive filament, thus affecting the threshold region [33], [34].”
BackgroundSelf-citation有田正志, Ohno, Y., Murakami, Y., 高見澤圭佑, Tsurumaki‐Fukuchi, A., & Takahashi, Y. (2016) · Nanoscale · doi:10.1039/c6nr02602h · Cited by 18
Abbas, H., Li, J., Ali, A., Hussain, S., Jung, J., & Ang, D. S. (2024) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2024.07.033 · Cited by 17
A flexible spiking hair sensillum for ultralow power density noncontact perception
Long, H., Wan, Z., Pei, M., Shi, K., Qiao, L., Shi, Y., Wan, Q., & Wan, C. (2025) · Science Advances · doi:10.1126/sciadv.ady0336 · Cited by 19
Ramazanov, S. M., Orudzhev, F. F., Gajiev, G. M., Holcman, V., Matos, R. S., Filho, H. D. D. F., Ţălu, Ş., & Selimov, D. A. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.158863 · Cited by 16
Multiphase Reset Induced Reliable Dual-Mode Resistance Switching of the Ta/HfO 2 /RuO 2 Memristor
Shin, D. H., Park, H., Ghenzi, N., Kim, Y. R., Cheong, S., Shim, S. K., Yim, S., Park, T. W., Song, H., Lee, J., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c19523 · Cited by 18
Understanding the conductive channel evolution in Na:WO 3−x -based planar devices
Shang, D., Li, P., Wang, T., Carria, E., Sun, J., Shen, B., Taubner, T., Valov, I., Waser, R. M., & Wuttig, M. (2015) · Nanoscale · doi:10.1039/c4nr07545e · Cited by 17
Simulation study of conductive filament growth dynamics in oxide-electrolyte-based ReRAM
Sun, P., Liu, S., Li, L., & Liu, M. (2014) · Journal of Semiconductors · doi:10.1088/1674-4926/35/10/104007 · Cited by 18
Tappertzhofen, S., & Hofmann, S. (2017) · Nanoscale · doi:10.1039/c7nr05847k · Cited by 17
Deswal, S., Kumar, A., & Kumar, A. (2018) · AIP Advances · doi:10.1063/1.5040466 · Cited by 18
Fluorenone/carbazole based bipolar small molecules for non-volatile memory devices
Yang, J., Ting, L., Wang, R., Mao, J., Ren, Y., Chang, C., Yeh, C.-M., Chou, H., Zhou, Y., & Han, S. (2019) · Organic Electronics · doi:10.1016/j.orgel.2019.105584 · Cited by 18
Nikiruy, K. E., Surazhevsky, I. A., Demin, V. A., & Emelyanov, A. V. (2020) · physica status solidi (a) · doi:10.1002/pssa.201900938 · Cited by 18
Nonvolatile Resistive Switching in Layered InSe via Electrochemical Cation Diffusion
Mazumder, A., Ahmed, T., Mayes, E. L. H., Tawfik, S. A., Russo, S. P., Low, M. X., Ranjan, A., Balendhran, S., & Walia, S. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100999 · Cited by 18
Elastic resistance change and action potential generation of non-faradaic Pt/TiO2/Pt capacitors
Lim, H., Jang, H. W., Lee, D., Kim, I., Hwang, C. S., & Jeong, D. S. (2013) · Nanoscale · doi:10.1039/c3nr02154h · Cited by 16
Dynamic switching mechanism of conduction/set process in Cu/a-Si/Si memristive device
Gao, L., Lee, S., Hoskins, B. D., Yoo, H. K., & Kang, B. S. (2013) · Applied Physics Letters · doi:10.1063/1.4816327 · Cited by 17
Structural and electronic properties of copper-doped chalcogenide glasses
Guzman, D., & Strachan, A. H. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.055801 · Cited by 17
Zhang, T., Yin, M., Lu, X., Cai, Y., Yang, Y., & Huang, R. (2017) · Nano Futures · doi:10.1088/2399-1984/aa678b · Cited by 16
Self-citationCho, J., Chun, S. Y., Kim, G. H., Sriboriboon, P., Han, S., Shin, S. B., Kim, J., Nam, S., Kim, Y., Kim, Y., et al. (2025) · Advanced Science · doi:10.1002/advs.202412289 · Cited by 16
Statistical characteristics of reset switching in Cu/HfO2/Pt resistive switching memory
Zhang, M., Long, S., Wang, G., Liu, R., Xu, X., Li, Y., Xu, D., Liu, Q., Lv, H., Miranda, E. A., et al. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-694 · Cited by 16
“A majority of works have focused on exploring the underlying switching mechanism for most transition metal oxide materials in set and reset processes [7-11].”
BackgroundHighly performing ionic liquid enriched hybrid RSDs
Rajan, K., Bejtka, K., Bocchini, S., Perrone, D., Chiappone, A., Roppolo, I., Pirri, C. F., Ricciardi, C., & Chiolerio, A. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01093a · Cited by 17
Bousoulas, P., Tsioustas, C., & Tsoukalas, D. (2022) · Applied Physics Letters · doi:10.1063/5.0098087 · Cited by 16
Zheng, Y., Yu, D., Lian, H., Yuan, H., Zhou, Y., & Yang, S. (2023) · Science China Materials · doi:10.1007/s40843-022-2367-0 · Cited by 16
Wang, R., Chang, K., Zhao, X., Yu, X.-X., Ma, S.-Q., Zhao, Z., & Wang, H. (2023) · Applied Physics Letters · doi:10.1063/5.0156972 · Cited by 12
Nonvolatile Memristive Materials and Physical Modeling for In‐Memory and In‐Sensor Computing
Go, S., Lim, K.-G., Lee, T. H., & Loke, D. K. (2024) · Small Science · doi:10.1002/smsc.202300139 · Cited by 16
Thinner 2D α-MoO3 makes setting up memristors easier
Hong, Y., Lan, S., Pan, B., et al. (2024) · Journal of Materiomics · doi:10.1016/j.jmat.2024.01.012 · Cited by 16
Recent development of studies on the mechanism of resistive memories in several metal oxides
Tian, X., Wang, L., Li, X., Wei, J., Yang, S., Xu, Z., Wang, W., & Bai, X. (2013) · Science China Physics Mechanics and Astronomy · doi:10.1007/s11433-013-5341-9 · Cited by 16
Stochastic switching of TiO2-based memristive devices with identical initial memory states
Li, Q., Khiat, A., Salaoru, I., Xu, H., & Prodromakis, T. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-293 · Cited by 16
“Nonetheless, the operation mechanism of ReRAM devices remains a bone of contention [4,5] with the formation and rupture of conducting filaments being ascertained as the functional switching mechanism [6].”
BackgroundA physics-based compact model for material- and operation-oriented switching behaviors of CBRAM
Zhao, Y., Hu, J., Huang, P. C., Yuan, F., Chai, Y., Liu, X. Y., & Kang, J. (2016) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2016.7838370 · Cited by 18
Morphology and Number Density of Voids in Hydrogenated Amorphous Silicon: AnAb InitioStudy
Biswas, P., Paudel, D., Atta‐Fynn, R., et al. (2017) · Physical Review Applied · doi:10.1103/physrevapplied.7.024013 · Cited by 16
“While a growth direction from an inert cathode to an active (oxidizable) anode follows from the conventional electrochemical theory,[55] an opposite growth direction has been also reported in the literature [56, 57] and observed via in situ transmission electron microscopy (TEM).”
BackgroundXu, Y., Tan, L., Sun, B. T., Lei, M., Zhao, Y., Li, T., Zheng, L., Zhu, S., Zhang, Y., & Zhao, Y. X. (2020) · Current Applied Physics · doi:10.1016/j.cap.2020.02.002 · Cited by 16
Lin, L., Huo, J., Peng, P., et al. (2020) · Nanoscale · doi:10.1039/c9nr10690a · Cited by 16
Revisiting Stochastic Computing in the Era of Nanoscale Nonvolatile Technologies
Agrawal, A., Chakraborty, I., Roy, D., Saxena, U., Sharmin, S., Koo, M., Shim, Y. S., Srinivasan, G., Liyanagedera, C., Sengupta, A., et al. (2020) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2020.2991679 · Cited by 17
“The anode metal particle hopping rate is given by [23] = τ where k B is Boltzmann’s constant, T is the temperature, τ is the characteristic switching time, ν is the attempt frequency, and − E a ( V ) is the bias-dependent activation energy.”
BackgroundLiu, Q., Sun, J., Lv, H., Long, S., Li, L., Yin, K., Wan, N., Li, Y., Sun, L., & Liu, M. (2012) · Advanced Materials · doi:10.1002/adma.201203771 · Cited by 15
Guo, J., Liu, L., Bian, B., Wang, J., Zhao, X., Zhang, Y., & Yan, Y. L. (2022) · Nano Letters · doi:10.1021/acs.nanolett.2c02675 · Cited by 17
Memristors and Memristive Devices for Neuromorphic Computing
Sheridan, P. M., & Lu, W. D. (2013) · Springer eBooks · doi:10.1007/978-3-319-02630-5_8 · Cited by 17
Self-citationChiu, C.-F., Ginnaram, S., Senapati, A., Chen, Y.-P., & Maikap, S. (2020) · Electronics · doi:10.3390/electronics9091466 · Cited by 17
“[54] and Cu protrusion in Cu/HfO2/Pt devices is observed by Lv et al.”
BackgroundMethodBousoulas, P., Papakonstantinopoulos, C., Kitsios, S., Moustakas, K., Sirakoulis, G. C., & Tsoukalas, D. (2021) · Micromachines · doi:10.3390/mi12030306 · Cited by 17
“The results that are presented at Figure 1a point out the validity of our theoretical approach while CFs with a diameter at the vicinity with the BE (ϕB) of 6 nm was assumed (Supplementary Materials Figure S6).”
BackgroundInfluentialKim, H. J., Kim, J., Park, T. G., Yoon, J. H., & Hwang, C. S. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100209 · Cited by 17
Safe, secure and trustworthy compute-in-memory accelerators
Wang, Z., Wu, Y., Park, Y., & Lu, W. D. (2024) · Nature Electronics · doi:10.1038/s41928-024-01312-y · Cited by 16
“It operates by relocating defects/ions within the insulation layer under an electric field, resulting in the growth/rupture of conductive filaments 40,41 .”
Self-citation12.7 MA/cm2 On-Current Density and High Uniformity Realized in AgGeSe/Al2O3 Selectors
Wan, T., Lu, Y., Yuan, J., Li, H., Li, Y., Huang, X., Xue, K., & Miao, X. (2021) · IEEE Electron Device Letters · doi:10.1109/led.2021.3061620 · Cited by 15
Xu, P., Fa, W., & Chen, S. (2023) · ACS Nano · doi:10.1021/acsnano.3c01405 · Cited by 15
In-Memory Sensing and Computing for Cancer Diagnostics: A Perspective Paper
Carrara, S., Chen, J., Bhardwaj, K., Golparvar, A. J., & Barbruni, G. L. (2023) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2023.3334144 · Cited by 16
Yan, X., Chen, Y. F., Hao, H., Liu, Q., Zhang, E. P., Shi, S., & Lou, J. (2014) · Applied Physics Letters · doi:10.1063/1.4893601 · Cited by 15
Sato, Y., Gondo, T., Miyazaki, H., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4986361 · Cited by 15
Ratio-based multi-level resistive memory cells
Lastras-Montaño, M. Á., Pozo-Zamudio, O. D., Glebsky, L. Y., Zhao, M., Wu, H., & Cheng, K.-T. T. (2021) · Scientific Reports · doi:10.1038/s41598-020-80121-7 · Cited by 17
Humood, K., Saylan, S., Jaoudé, M. A., Mohammad, B. S., & Ravaux, F. (2021) · Materials Science and Engineering B · doi:10.1016/j.mseb.2021.115267 · Cited by 16
Li, D., Li, C., Wang, J., Xu, M. X., Ma, J., Gu, D., Liu, F., Jiang, Y., & Li, W. (2022) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.2c00893 · Cited by 15
Kuzmin, A., Anspoks, A., Kalinko, A., Timoshenko, J., & Kalendarev, R. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2014.01.022 · Cited by 16
In situ transmission electron microscopy of resistive switching in thin silicon oxide layers
Duchamp, M., Migunov, V., Tavabi, A. H., Mehonić, A., Buckwell, M., Munde, M. S., Kenyon, A. J., & Dunin‐Borkowski, R. E. (2016) · Resolution and Discovery · doi:10.1556/2051.2016.00036 · Cited by 15
Enlarged read window in the asymmetric ITO/HfOx/TiN complementary resistive switch
Zhang, H. Z., Ang, D. S., Zhou, Y. J., & Wang, X. P. (2017) · Applied Physics Letters · doi:10.1063/1.4995252 · Cited by 15
Abunahla, H., & Mohammad, B. S. (2017) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-319-65699-1_1 · Cited by 15
Microscopic investigations of switching phenomenon in memristive systems: a mini review
Younis, A., & Li, S. (2018) · RSC Advances · doi:10.1039/c8ra05340e · Cited by 16
Guo, T., Elshekh, H., Yu, Z., Yu, B., Wang, D., Kadhim, M. S., Chen, Y., Hou, W., & Sun, B. T. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100540 · Cited by 15
Transferable Memristive Nanoribbons Comprising Solution-Processed Strontium Titanate Nanocubes
Wang, J., Choudhary, S., Harrigan, W. L., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00220 · Cited by 14
López-Soriano, S., Purushothama, J. M., Vena, A., & Perret, E. (2022) · Scientific Reports · doi:10.1038/s41598-022-08127-x · Cited by 17
Observing resistive switching behaviors in single Ta2O5 nanotube-based memristive devices
Liu, C.-J., Lo, H.-Y., Hou, A.-Y., Chen, J.-Y., Wang, C.-H., Huang, C., & Wu, W. (2022) · Materials Today Nano · doi:10.1016/j.mtnano.2022.100212 · Cited by 14
Two-stage filamentary mechanism in high-performance organic resistive switches
Bisht, A., Saini, N., Bhardwaj, K., et al. (2023) · Journal of Materials Chemistry C · doi:10.1039/d3tc02348f · Cited by 14
Highly Stable HfO2 Memristors through van der Waals Electrode Lamination and Delamination
Tong, W., Wei, W., Zhang, X., Ding, S., Lu, Z., Liu, L., Li, W., Pan, C., Kong, L., Wang, Y., et al. (2023) · Nano Letters · doi:10.1021/acs.nanolett.3c02888 · Cited by 16
Fully 2D Materials‐Based Resistive Switching Circuits for Advanced Data Encryption
Han, T., Aguirre, F. L., Zhu, K., Yuan, B., Pazos, S. M., Zhang, N., Wang, S., Li, S., & Lanza, M. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403029 · Cited by 13
The neuromorphic computing for biointegrated electronics
Yoon, S. J., Park, J. T., & Lee, Y. (2024) · Soft Science · doi:10.20517/ss.2024.12 · Cited by 21
Ligorio, G., Nardi, M. V., & Koch, N. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04794 · Cited by 14
Веденеев, А. С., Rylkov, V. V., Napolskii, K. S., Leontiev, A. P., Klimenko, A. A., Козлов, А. М., Luzanov, V. A., Nikolaev, S. N., Temiryazeva, M. P., & Бугаев, А. С. (2017) · Journal of Experimental and Theoretical Physics Letters · doi:10.1134/s0021364017180138 · Cited by 14
Mussel‐Inspired Polydopamine Coating for Flexible Ternary Resistive Memory
Zhao, Y., Cheng, X., Qian, W. H., Zhou, J., Sun, W., Hou, X., He, J., Li, H., Xu, Q., Li, N., et al. (2018) · Chemistry - An Asian Journal · doi:10.1002/asia.201800634 · Cited by 13
Wlaźlak, E., Kalinowska‐Tłuścik, J., Przyczyna, D., Zawal, P., & Szaciłowski, K. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc00679c · Cited by 5
Performance Improvement of Conductive Bridging Random Access Memory by Electrode Alloying
Qiao, L., Sun, Y., Song, C., Yin, S., Wan, Q., Liu, J., Wang, R., Zeng, F., & Pan, F. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c01785 · Cited by 15
Sun, B., Han, X., Xu, R., & Qian, K. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.0c00193 · Cited by 15
Deswal, S., Kumar, A., & Kumar, A. (2018) · IR@NPL (CSIR-The National Physical Laboratory(NPL)) · Cited by 14
Role of defects in resistive switching dynamics of memristors
Tütüncüoğlu, G., & Mannodi‐Kanakkithodi, A. (2022) · MRS Communications · doi:10.1557/s43579-022-00243-z · Cited by 17
“(Taken with permission from [23]) c) Formation of Ta-rich CF in Ta/HfO2/Pt memristor device.”
BackgroundMilano, G., Miranda, E. A., Fretto, M., Valov, I., & Ricciardi, C. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11022 · Cited by 16
Zhou, Y., Yin, Y., Peng, Y., Zhou, W., Yuan, H., Qin, Z., Liu, B., Zhang, Y., & Tang, D. (2014) · Materials Research Express · doi:10.1088/2053-1591/1/2/025025 · Cited by 14
“Yang et al have studied the conducting filament growth dynamics as positive ions being oxidized and deoxidized under bias voltage with in situ transmission electron microscopy [15].”
BackgroundThickness effect on the stability of unipolar resistance switching in tin ferrite thin films
Gong, G., Wu, C., Hu, P., et al. (2016) · Current Applied Physics · doi:10.1016/j.cap.2016.05.020 · Cited by 14
Anisotropic Magnetoresistance of Nano-conductive Filament in Co/HfO2/Pt Resistive Switching Memory
Li, L., Liu, Y., Teng, J., Long, S., Guo, Q., Zhang, M., Wu, Y. C., Yu, G., Liu, Q., Lv, H., et al. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-1983-2 · Cited by 14
Wang, X., Gao, B., Wu, H., Li, X., Hong, D., Chen, Y., & Qian, H. (2017) · Nanoscale · doi:10.1039/c7nr02023f · Cited by 14
Jian, W.-Y., You, H., & Wu, C.-Y. (2017) · Japanese Journal of Applied Physics · doi:10.7567/jjap.57.011501 · Cited by 14
Zhang, Q., Zhou, J., Li, H., et al. (2018) · Chemistry - An Asian Journal · doi:10.1002/asia.201701778 · Cited by 14
Zhang, L., Wu, C. G., Liu, J., Zhao, X., Wang, Z., Xu, H., Wang, L., & Liu, Y. (2018) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201800320 · Cited by 15
Tungsten Oxide Memristive Devices for Neuromorphic Applications.
Chang, T. (2012) · Deep Blue (University of Michigan) · Cited by 19
Self-citationRen, Y., Tao, Y., Li, X., Wang, Z., Xu, H., Ielmini, D., Lin, Y., Zhao, X., & Liu, Y. (2019) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ab5d94 · Cited by 12
Xiao, A., Liu, Y., Yang, T., et al. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.118616 · Cited by 13
Probing switching mechanism of memristor for neuromorphic computing
Yang, Z., Zhang, Z., Li, C., Yang, D., Hui, F., & Sun, L. (2023) · Nano Express · doi:10.1088/2632-959x/acd70c · Cited by 14
Controlling Volatility and Nonvolatility of Memristive Devices by Sn Alloying
Passerini, E., Lewerenz, M., Csontos, M., Olalla, N. J., Keller, K., Aeschlimann, J., Xie, F., Emboras, A., Zhang, X. Z., Fischer, M., et al. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c01275 · Cited by 13
Metadata
- Authors
- Yang, Y., Gao, P., Gaba, S., Chang, T., Pan, X., & Lu, W.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Lu, Wei
- Venue
- Nature Communications
- Published
- 2012-03-13
- Volume
- 3
- Issue
- 1
- Pages
- 732-732
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2043707274
- Cited by
- 1,208
- References
- 32
- Citations by year
- 2026: 68 · 2025: 69 · 2024: 92 · 2023: 84 · 2022: 95 · 2021: 85 · 2020: 101 · 2019: 100 · 2018: 89 · 2017: 95 · 2016: 88 · 2015: 81 · 2014: 71 · 2013: 68 · 2012: 21
- FWCI
- 49.24
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Nature Communications (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- National Science Foundation (0723032, 0907191, 0954621)
- Defense Advanced Research Projects Agency (HRL0011-09-C-001)
- Division of Materials Research (0723032, DMR-0723032)
- Division of Electrical, Communications and Cyber Systems (ECCS-0954621)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive switching, memristors, electrochemical metallization, cation transport, dielectric films, non-volatile memory, in situ transmission electron microscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.