Observation of conducting filament growth in nanoscale resistive memories
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; 5 of the 42 sources its claims cite were checked for support.
Abstract
Nanoscale resistive switching devices, sometimes termed memristors, have recently generated significant interest for memory, logic and neuromorphic applications. Resistive switching effects in dielectric-based devices are normally assumed to be caused by conducting filament formation across the electrodes, but the nature of the filaments and their growth dynamics remain controversial. Here we report direct transmission electron microscopy imaging, and structural and compositional analysis of the nanoscale conducting filaments. Through systematic ex-situ and in-situ transmission electron microscopy studies on devices under different programming conditions, we found that the filament growth can be dominated by cation transport in the dielectric film. Unexpectedly, two different growth modes were observed for the first time in materials with different microstructures. Regardless of the growth direction, the narrowest region of the filament was found to be near the dielectric/inert-electrode interface in these devices, suggesting that this region deserves particular attention for continued device optimization.
Overview
CoChat Summary
## TL;DR
Using ex-situ and in-situ TEM, the paper directly visualizes conducting filaments in nanoscale resistive memories and shows that filament growth can be limited by cation transport in the dielectric. It also reports two growth modes, including an unexpected mode in which filaments start from the active electrode and grow toward the inert electrode.
## Key findings
- In over 100 devices studied, none showed more than one completed filament.
- For SiO2-based devices, the authors observed conical filaments with a typical lateral size of ~20 nm near the tip and ~70 nm at the base; the filaments were verified to be composed of elemental Ag.
- In a-Si-based devices, partially formed filaments were sometimes seen starting from the active Ag electrode, and detailed TEM/EDS/SAED showed they were also composed of elemental Ag, sometimes as a chain of nanoparticles separated by 1–4 nm gaps.
- Across device types, the narrowest region of the filament was found near the dielectric/inert-electrode interface, and erasing typically began there; in-situ TEM on vertical Ag/a-Si/W devices confirmed this active-electrode-to-inert-electrode growth and inert-interface dissolution.
## Methods
- The study combined ex-situ and in-situ transmission electron microscopy with structural and compositional analysis (TEM, STEM/HAADF, HRTEM, SAED, EDS) on resistive memory devices.
- Devices used different dielectric layers of about 15 nm thickness: SiO2, Al2O3, and a-Si; planar devices were fabricated on ultrathin 15 nm SiNx membranes, and vertical Ag/a-Si/W devices were used for in-situ TEM.
- Electrical switching was measured with current compliance; the main analysis related filament morphology and switching behavior to dielectric choice, programming current, electric field, and temperature, including 36 a-Si-based resistive switches for the field-scaling data.
## Limitations
- The authors state that the switching time and electric field used here are still different from standard ECM cell operating conditions, so the filament growth under specific conditions must be analyzed individually.
- The paper itself notes that detailed analysis of the electrochemical processes and cation transport dynamics remains for future investigation.
- Evident from the text: many conclusions are based on specific device geometries and materials under ex-situ/in-situ TEM conditions, so direct generalization to all resistive memories is not established in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
4 Valid · 1 Not valid · 15 Not checked · 77 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“In general, the filament growth is determined by three dynamic processes 27 : (i) the anodic dissolution of the metal component at the active electrode; (ii) the transport of the metal ions through the dielectrics; and (iii) the reduction of metal ions and the crystallization of conducting filaments.”
What the sources say
- Supportedcites [27] Valov, I., Waser, R., Jameson, J. R & Kozicki,, M. N. Electrochemical metallization memories — fundamentals, applications, prospects. Nanotechnol. 22, 254003 (2011). source
Split into 3 atoms — 3 confirmed, 0 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This effect explains the observations in ECM devices that lower threshold voltages are typically required during programming processes, compared with those for the initial forming process 22,27,28 .”
What the sources say
- Not checked — no full text of the sourcecites [22] Waser, R., Dittmann, R., Staikov, G. & Szot, K. Redox-based resistive switching memories - Nanoionic mechanisms, prospects, and challenges. Adv. Mater. 21, 2632–2663 (2009). source
- Partly supportedcites [27] Valov, I., Waser, R., Jameson, J. R & Kozicki,, M. N. Electrochemical metallization memories — fundamentals, applications, prospects. Nanotechnol. 22, 254003 (2011). sourceExperimental — accuracy not yet measured
Section 3.3 (page unavailable) distinguishes the initial forming cycle from later switching cycles and suggests that forming may leave a nano-channel that aids subsequent filament growth. This supports the proposed mechanism, but the passage does not state that programming threshold voltages are typically lower than forming voltages. (LLM, conf=0.78)
- Not checked — no full text of the sourcecites [28] Schindler, C., Staikov, G. & Waser, R. Electrode kinetics of Cu–SiO2-based resistive switching cells: Overcoming the voltage-time dilemma of electrochemical metallization memories. Appl. Phys. Lett. 94, 072109 (2009). source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“the filaments in Fig. 1b apparently started growth from the inert electrode side as evidenced by the locations of the partially formed filaments.”
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“many of the incomplete filaments exhibiting a noteworthy dendrite structure with the branches pointing towards the active electrode”
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“we provide unambiguous evidence that shows that localized, nanoscale filaments composed of elemental metals (and, in some cases, consisting of discrete nanoparticles instead of a solid wire) are formed during resistive switching.”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
51 more claims
Create a free account to see all 97 claims and every source verdict.
- It may state two separate claims as one. 36
- Probably not a substantial claim. 10
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The change from OFF to ON state is explained by the formation of a dominating Ag filament (15,16).”
From Stochastic memristive devices for computing and neuromorphic applications (2013) · cites this paper as [16]
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Jo, S. H., Chang, T., Ebong, I., Bhadviya, B. B., Mazumder, P., & Lu, W. (2010) · Nano Letters · doi:10.1021/nl904092h · Cited by 4,174
Self-citationMemristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Memristive devices and systems
Chua, L. O., & Kang, S. M. (1976) · Proceedings of the IEEE · doi:10.1109/proc.1976.10092 · Cited by 2,604
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
‘Memristive’ switches enable ‘stateful’ logic operations via material implication
Borghetti, J., Snider, G. S., Kuekes, P. J., Yang, J. J., Stewart, D. R., & Williams, R. S. (2010) · Nature · doi:10.1038/nature08940 · Cited by 1,929
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Cited by
Items 201–300 of 1,201
Recent progress in artificial synaptic devices: materials, processing and applications
Chen, F., Zhou, Y., Zhu, Y., Zhu, R., Guan, P., Fan, J., Zhou, L., Nagarajan, V., von Wegner, F., Saribatir, E., et al. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc01211h · Cited by 92
Zhang, C., Shang, J., Xue, W., Tan, H., Pan, L., Yang, X., Guo, S., Hao, J., Liu, G., & Li, R. (2016) · Chemical Communications · doi:10.1039/c6cc00989a · Cited by 91
The DNA strand assisted conductive filament mechanism for improved resistive switching memory
Sun, B. T., Wei, L., Li, H., Jia, X., Wu, J., & Chen, P. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc02732b · Cited by 89
Jang, M. H., Agarwal, R., Nukala, P., Choi, D., Johnson, A. T. C., Chen, I., & Agarwal, R. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b02951 · Cited by 88
Enhanced resistive switching characteristics in Al 2 O 3 memory devices by embedded Ag nanoparticles
Gao, L., Li, Y., Li, Q., Song, Z., & Ma, F. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa6cd0 · Cited by 93
“This leads to similar conicalshaped CFs, which is consistent with previous literature [16].”
BackgroundResultInfluentialThreshold switching memristor-based stochastic neurons for probabilistic computing
Wang, K., Hu, Q., Gao, B., Lin, Q., Zhuge, F., Zhang, D., Wang, L., He, Y., Scheicher, R. H., Tong, H., et al. (2020) · Materials Horizons · doi:10.1039/d0mh01759k · Cited by 94
Atomic View of Filament Growth in Electrochemical Memristive Elements
Lv, H., Xu, X., Sun, P., Liu, H., Luo, Q., Liu, Q., Banerjee, W., Sun, H., Long, S., Li, L., et al. (2015) · Scientific Reports · doi:10.1038/srep13311 · Cited by 90
Resistance switching memory in perovskite oxides
Yan, Z. B., & Liu, J. (2015) · Annals of Physics · doi:10.1016/j.aop.2015.03.028 · Cited by 86
Millivolt Modulation of Plasmonic Metasurface Optical Response via Ionic Conductance
Thyagarajan, K., Sokhoyan, R., Zornberg, L. Z., & Atwater, H. A. (2017) · Advanced Materials · doi:10.1002/adma.201701044 · Cited by 90
Nanometer‐Scale Phase Transformation Determines Threshold and Memory Switching Mechanism
Chae, B., Seol, J. B., Song, J., Baek, K., Oh, S., Hwang, H., & Park, C. G. (2017) · Advanced Materials · doi:10.1002/adma.201701752 · Cited by 87
Lilak, S., Woods, W., Scharnhorst, K. S., Dunham, C. S., Teuscher, C., Stieg, A. Z., & Gimzewski, J. K. (2021) · Frontiers in Nanotechnology · doi:10.3389/fnano.2021.675792 · Cited by 87
“For electrochemical metallization memristors filament growth is dominated by cation transport through the insulating medium as shown in Figure 1 and has been experimentally observed in-situ (Guo et al., 2007; Yang et al., 2012; Sun et al., 2019).”
BackgroundControllable resistive switching of STO:Ag/SiO2-based memristor synapse for neuromorphic computing
Ilyas, N., Wang, J., Li, C., Fu, H., Li, D., Jiang, X., Gu, D., Jiang, Y., & Li, W. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.04.071 · Cited by 85
Abbas, H., Li, J., & Ang, D. S. (2022) · Micromachines · doi:10.3390/mi13050725 · Cited by 88
“It can be noted that the Ag CF rapidly contracted to Yang et al. demonstrated CF formation in a vertical CBRAM device with structure Ag/a-Si/W using in-situ TEM [52].”
MethodStretchable Motion Memory Devices Based on Mechanical Hybrid Materials
Liu, Y., Liu, Z., Zhu, B., Yu, J., He, K., Leow, W. R., Wang, M., Chandran, B. K., Qi, D., Wang, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701780 · Cited by 89
Forming‐Free Grain Boundary Engineered Hafnium Oxide Resistive Random Access Memory Devices
Petzold, S., Zintler, A., Eilhardt, R., Piros, E., Kaiser, N., Sharath, S. U., Vogel, T., Major, M., McKenna, K. P., Molina‐Luna, L., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900484 · Cited by 84
Lee, S., Park, H., Kim, M., Kang, S., & Lee, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10491 · Cited by 86
Dang, B., Liu, K., Wu, X., Yang, Z., Xu, L., Yang, Y., & Huang, R. (2022) · Advanced Materials · doi:10.1002/adma.202204844 · Cited by 86
Self-citationLiu, B., Liu, Z., Chiu, I.-S., Di, M., Wu, Y., Wang, J., Hou, T., & Lai, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04685 · Cited by 85
Reconfigurable Memristive Device Technologies
Edwards, A. H., Barnaby, H., Campbell, K. A., Kozicki, M. N., Liu, W., & Marinella, M. J. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2441752 · Cited by 97
“This case corresponds to the experimental observations in sputtered SiO2 films, whose open structure and high defect density result in higher than evaporated SiO2 [186].”
BackgroundInfluentialLi, X., Yang, J.-G., Ma, H.-P., Liu, Y., Ji, Z., Huang, W., Ou, X., Zhang, D. W., & Lü, H.-L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06476 · Cited by 83
Ismail, M., Rasheed, M., Mahata, C., Kang, M., & Kim, S. (2023) · Nano Convergence · doi:10.1186/s40580-023-00380-8 · Cited by 87
Migration of interfacial oxygen ions modulated resistive switching in oxide-based memory devices
Chen, C., Gao, S., Zeng, F., Tang, G., Li, S. Z., Song, C., Fu, H., & Pan, F. (2013) · Journal of Applied Physics · doi:10.1063/1.4812486 · Cited by 82
Raj, V., Aetukuri, N. P. B., & Nanda, J. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2022.100999 · Cited by 80
Normally-off Logic Based on Resistive Switches—Part I: Logic Gates
Balatti, S., Ambrogio, S., & Ielmini, D. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2422999 · Cited by 81
“, the anode during the set transition, toward the bottom electrode [26]–[28], as shown in Fig.”
MethodOxide Resistive Memory with Functionalized Graphene as Built‐in Selector Element
Yang, Y., Lee, J., Lee, S., Liu, C., Zhong, Z., & Lu, W. D. (2014) · Advanced Materials · doi:10.1002/adma.201400270 · Cited by 78
Self-citationNovel charm of 2D materials engineering in memristor: when electronics encounter layered morphology
Batool, S. A., Idrees, M., Zhang, S., Han, S., & Zhou, Y. (2022) · Nanoscale Horizons · doi:10.1039/d2nh00031h · Cited by 79
All-nanocellulose nonvolatile resistive memory
Celano, U., Nagashima, K., Koga, H., Nogi, M., Zhuge, F., Meng, G., He, Y. J., Boeck, J. D., Jurczak, M., Vandervorst, W., et al. (2016) · NPG Asia Materials · doi:10.1038/am.2016.144 · Cited by 85
“Among various models, the one based on the formation and the rupture of Ag conducting filaments [1,2] via the electrochemical redox process can appropriately explain our the resistive switching results in Ag/nanopaper/ITO structure.”
Resistive switching effects in oxide sandwiched structures
Zhu, X., Shang, J., & Li, R. (2012) · Frontiers of Materials Science · doi:10.1007/s11706-012-0170-8 · Cited by 79
“Advanced Materials, 2012, 24(14): 1844–1849 [67] Yang Y, Gao P, Gaba S, et al.”
MethodInfluentialQian, M., Pan, Y., Liu, F., Wang, M., Shen, H., He, D., Wang, B., Shi, Y., Miao, F., & Wang, X. (2014) · Advanced Materials · doi:10.1002/adma.201306028 · Cited by 77
Transient Resistive Switching Memory of CsPbBr3 Thin Films
Lin, Q., Hu, W. H., Zang, Z., Zhou, M., Du, J., Wang, M., Han, S., & Tang, X. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201700596 · Cited by 79
2D oriented covalent organic frameworks for alcohol-sensory synapses
Li, T., Yu, H., Xiong, Z., Gao, Z., Zhou, Y., & Han, S. (2021) · Materials Horizons · doi:10.1039/d1mh00315a · Cited by 77
Mechanism for resistive switching in chalcogenide-based electrochemical metallization memory cells
Zhuge, F., Li, K., Fu, B., Zhang, H., Li, J., Chen, H., Liang, L., Gao, J., Cao, H., Liu, Z., et al. (2015) · AIP Advances · doi:10.1063/1.4921089 · Cited by 80
Multilevel Cell Storage and Resistance Variability in Resistive Random Access Memory
Prakash, A., & Hwang, H. (2016) · Physical Sciences Reviews · doi:10.1515/psr-2016-0010 · Cited by 86
“In addition, although studies involving high resolution transmission electron microscopy showed the CFs in different systems [32]–[33], their in-situ clear visualization in the switching material have yet to be achieved.”
BackgroundTo the Issue of the Memristor’s HRS and LRS States Degradation and Data Retention Time
Фадеев, А. В., & Rudenko, K. V. (2021) · Russian Microelectronics · doi:10.1134/s1063739721050024 · Cited by 78
Tossoun, B. M., Liang, D., Cheung, S. S., Fang, Z., Sheng, X., Strachan, J. P., & Beausoleil, R. G. (2024) · Nature Communications · doi:10.1038/s41467-024-44773-7 · Cited by 96
有田正志, Takahashi, A., Ohno, Y., Nakane, A., Tsurumaki‐Fukuchi, A., & Takahashi, Y. (2015) · Scientific Reports · doi:10.1038/srep17103 · Cited by 78
Optically Modulated Threshold Switching in Core–Shell Quantum Dot Based Memristive Device
Wang, J., Lv, Z., Xing, X., Li, X., Wang, Y., Chen, M., Pang, G., Qian, F., Zhou, Y., & Han, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909114 · Cited by 80
Application of Resistive Random Access Memory in Hardware Security: A Review
Rajendran, G., Banerjee, W., Chattopadhyay, A., & Aly, M. M. S. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100536 · Cited by 82
Conductance quantization in oxygen-anion-migration-based resistive switching memory devices
Chen, C., Gao, S., Zeng, F., Wang, G. Y., Li, S. Z., Song, C., & Pan, F. (2013) · Applied Physics Letters · doi:10.1063/1.4816747 · Cited by 73
Bipolar and tri-state unipolar resistive switching behaviors in Ag/ZnFe 2 O 4 /Pt memory devices
Hu, W. H., Chen, X., Wu, G., Lin, Y., Qin, N., & Bao, D. (2012) · Applied Physics Letters · doi:10.1063/1.4744950 · Cited by 77
Understanding the Dual Nature of the Filament Dissolution in Conductive Bridging Devices
Celano, U., Goux, L., Belmonte, A., Opsomer, K., Degraeve, R., Detavernier, C., Jurczak, M., & Vandervorst, W. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00633 · Cited by 73
Sun, B. T., Zhang, X., Zhou, G., Zhang, C., Li, P., Xia, Y., & Zhao, Y. X. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.008 · Cited by 75
Kim, H. J., Park, T. H., Yoon, K. J., Seong, W. M., Jeon, J. W., Kwon, Y. J., Kim, Y., Kwon, D. E., Kim, G. S., Ha, T. J., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806278 · Cited by 77
Chen, X., Zhu, X., Xiao, W., Liu, G., Feng, Y. P., Ding, J., & Li, R. (2015) · ACS Nano · doi:10.1021/acsnano.5b00456 · Cited by 71
A Silk Fibroin Bio-Transient Solution Processable Memristor
Yong, J., Hassan, B., Liang, Y., Ganesan, K., Unnithan, R. R., Evans, R. J., Egan, G. F., Kavehei, O., Li, J., Chana, G., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-15395-5 · Cited by 80
Optimization of non-linear conductance modulation based on metal oxide memristors
Liu, H., Wei, M., & Chen, Y. (2018) · Nanotechnology Reviews · doi:10.1515/ntrev-2018-0045 · Cited by 80
“The Dv of SiO2 is about 10−24–10−20 cm2/s [55, 72] at room temperature, which is one or more orders of magnitude lower than that of other binary metal oxides.”
BackgroundNeuromorphic Nanoionics for Human–Machine Interaction: From Materials to Applications
Liu, X., Sun, C., Ye, X., Zhu, X., Hu, C., Tan, H., He, S., Shao, M., & Li, R. (2024) · Advanced Materials · doi:10.1002/adma.202311472 · Cited by 81
Emerging memory devices for artificial synapses
Park, Y., Kim, M., & Lee, J. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01500h · Cited by 74
Design of Materials Configuration for Optimizing Redox‐Based Resistive Switching Memories
Chen, S., & Valov, I. (2021) · Advanced Materials · doi:10.1002/adma.202105022 · Cited by 72
A Proposal for Hybrid Memristor-CMOS Spiking Neuromorphic Learning Systems
Serrano‐Gotarredona, T., Prodromakis, T., & Linares-Barranco, B. (2013) · IEEE Circuits and Systems Magazine · doi:10.1109/mcas.2013.2256271 · Cited by 74
“As a matter of fact, some researchers are observing the formation and annihilation of nanoscale width conducting filaments in memristors [73], [74].”
BackgroundRylkov, V. V., Nikolaev, S. N., Demin, V. A., Emelyanov, A. V., Ситников, А. В., Nikiruy, K. E., Леванов, В. А., Presnyakov, M. Y., Taldenkov, A. N., Vasiliev, A. L., et al. (2018) · Journal of Experimental and Theoretical Physics · doi:10.1134/s1063776118020152 · Cited by 69
A bio-inspired electronic synapse using solution processable organic small molecule
Mao, J., Zhou, L., Ren, Y., Yang, J., Chang, C., Lin, H., Chou, H., Zhang, S., Zhou, Y., & Han, S. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc05489d · Cited by 69
Flexible Transparent High‐Efficiency Photoelectric Perovskite Resistive Switching Memory
Liu, X., Ren, S., Li, Z., Guo, J., Yi, S., Yang, Z. Q., Hao, W., Li, R., & Zhao, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202202951 · Cited by 75
Conductance tomography of conductive filaments in intrinsic silicon-rich silica RRAM
Buckwell, M., Montesi, L., Hudziak, S., Mehonić, A., & Kenyon, A. J. (2015) · Nanoscale · doi:10.1039/c5nr04982b · Cited by 71
Yang, Y., Yin, M., Yu, Z., Wang, Z., Zhang, T., Cai, Y., Lu, W. D., & Huang, R. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700032 · Cited by 71
Self-citationYang, D., Yang, H., Guo, X., Zhang, H., Jiao, C., Xiao, W., Guo, P., Wang, Q., & He, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004514 · Cited by 69
Jung, U., Kim, M., Jang, J., Bae, J., Kang, I. M., & Lee, S. (2023) · Advanced Science · doi:10.1002/advs.202307494 · Cited by 69
Kim, Y. S., Baek, J. H., Im, I. H., Lee, D. H., Park, M. H., & Jang, H. W. (2024) · ACS Nano · doi:10.1021/acsnano.4c12884 · Cited by 75
Sun, J., Liu, Q., Xie, H., Wu, X. Y., Xu, F., Xu, T., Long, S., Lv, H., Li, Y., Sun, L., et al. (2013) · Applied Physics Letters · doi:10.1063/1.4790837 · Cited by 70
Electrochemical processes and device improvement in conductive bridge RAM cells
Goux, L., & Valov, I. (2015) · physica status solidi (a) · doi:10.1002/pssa.201532813 · Cited by 69
Emerging memristive neurons for neuromorphic computing and sensing
Li, Z., Tang, W., Zhang, B., Yang, R., & Miao, X. (2023) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2023.2188878 · Cited by 77
“However, their mechanism is mainly attributed to the redox reaction of the active metal electrode, such as Ag [74], Cu [75], Ni [76], etc.”
BackgroundJiang, X. L., Zhao, Y., Chen, Y. S., Li, D., Luo, Y., Zhao, D., Sun, Z., Sun, J. R., & Zhao, H. W. (2013) · Applied Physics Letters · doi:10.1063/1.4812811 · Cited by 68
Large‐Scale and Robust Multifunctional Vertically Aligned MoS 2 Photo‐Memristors
Ranganathan, K., Fiegenbaum‐Raz, M., & Ismach, A. F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005718 · Cited by 67
Guo, Z., Liu, G., Sun, Y., Zhang, Y., Zhao, J., Liu, P., Wang, H., Zhou, Z., Zhao, Z., Jia, X., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c06510 · Cited by 71
Role and Optimization of the Active Oxide Layer in TiO2‐Based RRAM
Regoutz, A., Gupta, I., Serb, A., Khiat, A., Borgatti, F., Lee, T., Schlueter, C., Torelli, P., Gobaut, B., Light, M. E., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503522 · Cited by 67
Bousoulas, P., Sakellaropoulos, D., Papakonstantinopoulos, C., Kitsios, S., Arvanitis, C., Bagakis, E., & Tsoukalas, D. (2020) · Nanotechnology · doi:10.1088/1361-6528/aba3a1 · Cited by 74
“Besides, in the literature there are concrete experimental and theoretical works on SiO2-based CBRAM, regarding the CF spatial dimension, that support our conjecture [27, 52].”
BackgroundZhang, Y., Poddar, S., Huang, H., Gu, L., Zhang, Q., Zhou, Y., Yan, S., Zhang, S., Song, Z., Huang, B., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg3788 · Cited by 69
“A larger SET CC would result in a more robust filament and a lower resistance level compared to a lower SET CC (32, 36).”
BackgroundConductive-bridging random-access memories for emerging neuromorphic computing
Cha, J., Yang, S. Y., Oh, J., Choi, S., Park, S., Jang, B. C., Ahn, W., & Choi, S. (2020) · Nanoscale · doi:10.1039/d0nr01671c · Cited by 67
Choi, S. H., Park, S., Seo, S., & Choi, S. (2022) · Science Advances · doi:10.1126/sciadv.abj7866 · Cited by 68
“, copper (Cu) or silver (Ag)] in CBRAM (8, 9).”
BackgroundSu, T., Cheng, W., Chen, C., Wang, W., Chuang, Y., Tan, G., Lin, H., Hou, C., Liu, C.-M., Chang, Y.-C., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c05436 · Cited by 65
Direct Observation of Conducting Nanofilaments in Graphene‐Oxide‐Resistive Switching Memory
Kim, S., Kim, J. Y., Choi, S., Lee, J. Y., & Jeong, H. Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502734 · Cited by 67
Effect of Electrode Materials on AlN-Based Bipolar and Complementary Resistive Switching
Chen, C., Gao, S., Tang, G., Fu, H., Wang, G., Song, C., Zeng, F., & Pan, F. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am303128h · Cited by 65
Lian, X., Cartoixà, X., Miranda, E. A., Perniola, L., Rurali, R., Long, S., Liu, M., & Suñé, J. (2014) · Journal of Applied Physics · doi:10.1063/1.4885419 · Cited by 67
In Situ Nanoscale Electric Field Control of Magnetism by Nanoionics
Zhu, X., Zhou, J., Chen, L., Guo, S., Liu, G., Li, R., & Lu, W. D. (2016) · Advanced Materials · doi:10.1002/adma.201601425 · Cited by 65
Self-citationRecent Advances of Quantum Conductance in Memristors
Xue, W., Gao, S., Shang, J., Yi, X., Liu, G., & Li, R. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800854 · Cited by 74
Hydrothermal synthesis and resistive switching behaviour of WO 3 /CoWO 4 core–shell nanowires
Sun, B. T., Li, H., Wei, L., & Chen, P. (2014) · CrystEngComm · doi:10.1039/c4ce01442a · Cited by 63
Realization of Functional Complete Stateful Boolean Logic in Memristive Crossbar
Li, Y., Zhou, Y., Xu, L., Lu, K., Wang, Z., Duan, N., Jiang, L., Cheng, L., Chang, T., Chang, K., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11465 · Cited by 63
Self-citationНиколаевич, М. М., Emelyanov, A. V., Demin, V. A., Nikiruy, K. E., Minnekhanov, A. A., Nikolaev, S. N., Taldenkov, A. N., Ovcharov, A. V., Presnyakov, M. Y., Sitnikov, A. V., et al. (2020) · Physical Review Applied · doi:10.1103/physrevapplied.14.034016 · Cited by 110
“, SiO2) from the active electrode of the MOM structure [1, 7–15].”
BackgroundHalide-Perovskite-Based Memristor Devices and Their Application in Neuromorphic Computing
Satapathi, S., Raj, K., Yukta, Y., & Afroz, M. A. (2022) · Physical Review Applied · doi:10.1103/physrevapplied.18.017001 · Cited by 63
Flexible, transferable and conformal egg albumen based resistive switching memory devices
Zhu, J. X., Zhou, W., Wang, Z., Xu, H., Lin, Y., Liu, W. Z., Ma, J. G., & Liu, Y. (2017) · RSC Advances · doi:10.1039/c7ra05237e · Cited by 66
High-speed true random number generation based on paired memristors for security electronics
Zhang, T., Yin, M., Xu, C., Lu, X., Sun, X., Yang, Y., & Huang, R. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa8b3a · Cited by 64
Self-citationBejtka, K., Milano, G., Ricciardi, C., Pirri, C. F., & Porro, S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05038 · Cited by 62
Interfacing Biology and Electronics with Memristive Materials
Tzouvadaki, I., Gkoupidenis, P., Vassanelli, S., Wang, S., & Prodromakis, T. (2023) · Advanced Materials · doi:10.1002/adma.202210035 · Cited by 66
Joule heating effect in nonpolar and bipolar resistive random access memory
Uenuma, M., Ishikawa, Y., & Uraoka, Y. (2015) · Applied Physics Letters · doi:10.1063/1.4928661 · Cited by 60
Memristive computing devices and applications
Zidan, M. A., Chen, A., Indiveri, G., & Lu, W. D. (2017) · Journal of Electroceramics · doi:10.1007/s10832-017-0103-0 · Cited by 68
“To program a PCM, short, high current pulses RESET the device to the high resistance amorphous phase, while long, low current pulses crystallize the phase change material and reduce its resistance, as shown in Fig.”
BackgroundInfluentialSelf-citationNanoionic Resistive‐Switching Devices
Zhu, X., Lee, S. H., & Lu, W. D. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900184 · Cited by 64
Self-citationToward Nonvolatile Switching in Silicon Photonic Devices
Parra, J. O., Olivares, I., Brimont, A., & Sanchis, P. (2021) · Laser & Photonics Review · doi:10.1002/lpor.202000501 · Cited by 62
Neuromorphic Devices for Bionic Sensing and Perception
Zeng, M., He, Y., Zhang, C., & Wan, Q. C. (2021) · Frontiers in Neuroscience · doi:10.3389/fnins.2021.690950 · Cited by 64
Peng, C.-N., Wang, C.-W., Chan, T.-C., Chang, W.-Y., Wang, Y., Tsai, H., Wu, W., Chen, L., & Chueh, Y. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-559 · Cited by 65
“Once Au cations ionized from Au electrode transport into the ZnO film, they will be reduced into Au NPs immediately, leading to the wide base of the conducting bridge near the anode and the formation of the narrow neck near the cathode, which is consistent with the results observed by other groups in Ag/SiO2/Pt [21] a…”
ResultXue, W., Xiao, W., Shang, J., Chen, X., Zhu, X., Pan, L., Tan, H., Zhang, W., Ji, Z. H., Liu, G., et al. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/42/425204 · Cited by 61
Liu, D., Wang, N., Wang, G., Shao, Z., Zhu, X., Zhang, C., & Cheng, H. (2013) · Applied Physics Letters · doi:10.1063/1.4800229 · Cited by 59
Rahaman, S. Z., Maikap, S., Chen, W., Lee, H. Y., Chen, F. T., Kao, M., & Tsai, M.-J. (2012) · Applied Physics Letters · doi:10.1063/1.4745783 · Cited by 60
Hao, A., Ismail, M., He, S., Qin, N., Huang, W., Wu, J., & Bao, D. (2017) · RSC Advances · doi:10.1039/c7ra08756j · Cited by 60
Effect of interlayer spacing in layered perovskites on resistive switching memory
Kim, S., Yang, J., Choi, E., & Park, N. (2019) · Nanoscale · doi:10.1039/c9nr00438f · Cited by 58
Filament Engineering of Two‐Dimensional h‐BN for a Self‐Power Mechano‐Nociceptor System
Ding, G., Chen, R., Xie, P., Yang, B., Shang, G., Liu, Y., Gao, L., Mo, W., Zhou, K., Han, S., et al. (2022) · Small · doi:10.1002/smll.202200185 · Cited by 67
Nanowire-based resistive switching memories: devices, operation and scaling
Ielmini, D., Cagli, C., Nardi, F., & Zhang, Y. (2013) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/46/7/074006 · Cited by 57
“According to the latter interpretation, the CF formed under positive voltage is already disconnected naturally due to the compressive stress developed around the CF after its formation and due to the plastic stiffness of the electrolyte [35, 36].”
BackgroundGonçalves, R. S., Barrozo, P., Brito, G. L., et al. (2018) · Thin Solid Films · doi:10.1016/j.tsf.2018.07.008 · Cited by 57
Hui, F., Villena, M. A., Fang, W., et al. (2018) · 2D Materials · doi:10.1088/2053-1583/aac615 · Cited by 56
Qin, F. H., Zhang, Y., Song, H. W., & Lee, S. (2023) · Materials Advances · doi:10.1039/d3ma00069a · Cited by 68
Koch, U., Hoessbacher, C. B., Emboras, A., & Leuthold, J. (2017) · Journal of Electroceramics · doi:10.1007/s10832-017-0072-3 · Cited by 55
Metadata
- Authors
- Yang, Y., Gao, P., Gaba, S., Chang, T., Pan, X., & Lu, W.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Lu, Wei
- Venue
- Nature Communications
- Published
- 2012-03-13
- Volume
- 3
- Issue
- 1
- Pages
- 732-732
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2043707274
- Cited by
- 1,208
- References
- 32
- Citations by year
- 2026: 68 · 2025: 69 · 2024: 92 · 2023: 84 · 2022: 95 · 2021: 85 · 2020: 101 · 2019: 100 · 2018: 89 · 2017: 95 · 2016: 88 · 2015: 81 · 2014: 71 · 2013: 68 · 2012: 21
- FWCI
- 49.24
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Nature Communications (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- National Science Foundation (0723032, 0907191, 0954621)
- Defense Advanced Research Projects Agency (HRL0011-09-C-001)
- Division of Materials Research (0723032, DMR-0723032)
- Division of Electrical, Communications and Cyber Systems (ECCS-0954621)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive switching, memristors, electrochemical metallization, cation transport, dielectric films, non-volatile memory, in situ transmission electron microscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.