Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Organolead trihalide perovskite materials have been successfully used as light absorbers in efficient photovoltaic cells. Two different cell structures, based on mesoscopic metal oxides and planar heterojunctions have already demonstrated very impressive advances in performance. Here, we report a bilayer architecture comprising the key features of mesoscopic and planar structures obtained by a fully solution-based process. We used CH3NH3 Pb(I(1-x)Br(x))3 (x = 0.1-0.15) as the absorbing layer and poly(triarylamine) as a hole-transporting material. The use of a mixed solvent of γ-butyrolactone and dimethylsulphoxide (DMSO) followed by toluene drop-casting leads to extremely uniform and dense perovskite layers via a CH3NH3I-PbI2-DMSO intermediate phase, and enables the fabrication of remarkably improved solar cells with a certified power-conversion efficiency of 16.2% and no hysteresis. These results provide important progress towards the understanding of the role of solution-processing in the realization of low-cost and highly efficient perovskite solar cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A calculation of the group index (n g ) of the mode based on refractive index (n) values obtained by P. Loeper and M. Stuckelberger [22] resulted in ng ≈ 6.”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [22]
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Self-citationLi, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Self-citation
Cited by
Items 901–1,000 of 1,012
Choi, J., Le, Q. V., Hong, K., Moon, C. W., Han, J. S., Kwon, K. C., Cha, P.-R., Kwon, Y., Kim, S. Y., & Jang, H. W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08197 · Cited by 164
Zhou, S., Tang, R., & Yin, L. (2017) · Advanced Materials · doi:10.1002/adma.201703682 · Cited by 164
Li, F., Yuan, J., Ling, X., Zhang, Y., Yang, Y., Cheung, S. H., Ho, C. H. Y., Gao, X., & Ma, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706377 · Cited by 162
Yang, Y., Peng, H., Liu, C., Arain, Z., Ding, Y., Ma, S., Liu, X., Hayat, T., Alsaedi, A., & Dai, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11925b · Cited by 164
Multi-cation perovskites prevent carrier reflection from grain surfaces
Saidaminov, M. I., Williams, K., Wei, M., Johnston, A., Quintero-Bermudez, R., Vafaie, M., Pina, J. M., Proppe, A. H., Hou, Y., Walters, G., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0602-2 · Cited by 162
Wang, S., Yang, B., Han, J., He, Z., Li, T., Cao, Q., Yang, J., Suo, J., Li, X., Liu, Z., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02043e · Cited by 164
Sun, X., Li, Z., Yu, X., Wu, X., Zhong, C., Liu, D., Lei, D., Jen, A. K. ‐., Li, Z., & Zhu, Z. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202016085 · Cited by 162
All-perovskite tandem solar cells: from fundamentals to technological progress
Lim, J.-K., Park, N., Seok, S. I., & Saliba, M. (2024) · Energy & Environmental Science · doi:10.1039/d3ee03638c · Cited by 172
Self-citationProgress in emerging solution-processed thin film solar cells – Part I: Polymer solar cells
Wang, Q., Xie, Y., Soltani-Kordshuli, F., & Eslamian, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.063 · Cited by 164
Sun, Y., Tai, M., Song, C., Wang, Z., Yin, J., Li, F., Wu, H., Zeng, F., Lin, H., & Pan, F. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b12817 · Cited by 164
Integrated Perovskite/Bulk-Heterojunction toward Efficient Solar Cells
Liu, Y., Hong, Z., Chen, Q., Chang, W., Zhou, H., Song, T.-B., Young, E., Yang, Y. (., You, J., Li, G., et al. (2015) · Nano Letters · doi:10.1021/nl504168q · Cited by 160
Chih, Y., Wang, J., Yang, R., Liu, C., Chang, Y., Fu, Y., Lai, W., Chen, P., Wen, T., Huang, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602974 · Cited by 161
Luo, D., Zhao, L., Wu, J., Hu, Q., Zhang, Y., Xu, Z., Liu, Y., Liu, T., Chen, K., Yang, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604758 · Cited by 161
Self-citationZhang, M., Li, Z., Xin, X., Zhang, J., Feng, Y., & Lv, H. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c04330 · Cited by 162
The Role of Charge Selective Contacts in Perovskite Solar Cell Stability
Roose, B., Wang, Q., & Abate, A. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803140 · Cited by 158
Strategies to Improve Luminescence Efficiency of Metal‐Halide Perovskites and Light‐Emitting Diodes
Kim, Y., Kim, J. S., & Lee, T. (2019) · Advanced Materials · doi:10.1002/adma.201804595 · Cited by 160
Self-citationPassivation of defects in perovskite solar cell: From a chemistry point of view
Li, Y., Wu, H., Qi, W., Zhou, X., Li, J., Cheng, J., Zhao, Y., Li, Y., & Zhang, X. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105237 · Cited by 160
Hu, L., Wang, W., Liu, H., Peng, J., Cao, H., Shao, G., Xia, Z., Ma, W., & Tang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04272g · Cited by 160
Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells
Jiang, Y., Juarez-Perez, E. J., Ge, Q., Wang, S., Leyden, M. R., Ono, L. K., Raga, S. R., Hu, J., & Qi, Y. (2016) · Materials Horizons · doi:10.1039/c6mh00160b · Cited by 160
Li, Z., Tinkham, J., Schulz, P., Yang, M., Kim, D. H., Berry, J., Sellinger, A., & Zhu, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601451 · Cited by 159
Electrochemical Doping of Halide Perovskites with Ion Intercalation
Jiang, Q., Chen, M., Li, J., Wang, M., Zeng, X., Besara, T., Lu, J., Xin, Y., Shan, X., Pan, B., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b08004 · Cited by 160
Unraveling the Impact of Halide Mixing on Perovskite Stability
Hieulle, J., Wang, X., Stecker, C., Son, D.-Y., Qiu, L., Ohmann, R., Ono, L. K., Mugarza, A., Yan, Y., & Qi, Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11210 · Cited by 159
Molecular aspects of organic cations affecting the humidity stability of perovskites
Kim, B., & Seok, S. I. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03473k · Cited by 158
Self-citationPerovskite Single Crystals: Synthesis, Optoelectronic Properties, and Application
Li, J., Han, Z., Gu, Y., Yu, D., Liu, J., Hu, D., Xu, X., & Zeng, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008684 · Cited by 161
Domanski, K., Tress, W., Moehl, T., Saliba, M., Nazeeruddin, M. K., & Grätzel, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503188 · Cited by 158
Mali, S. S., & Hong, C. K. (2016) · Nanoscale · doi:10.1039/c6nr02276f · Cited by 158
Chang, J., Lin, Z., Zhu, H., Isikgor, F. H., Xu, Q.-H., Zhang, C., Hao, Y., & Ouyang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06851k · Cited by 159
Tsai, H., Nie, W., Lin, Y., Blancon, J. C., Tretiak, S., Even, J., Gupta, G., Ajayan, P. M., & Mohite, A. D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602159 · Cited by 160
Xi, J., Wu, Z., Jiao, B., Dong, H., Ran, C., Piao, C., Lei, T., Song, T., Ke, W., Yokoyama, T., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606964 · Cited by 159
Mechanisms of Lithium Intercalation and Conversion Processes in Organic–Inorganic Halide Perovskites
Dawson, J. A., Naylor, A. J., Eames, C., Roberts, M., Zhang, W., Snaith, H. J., Bruce, P. G., & Islam, M. S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00437 · Cited by 158
Controlling the crystallization dynamics of photovoltaic perovskite layers on larger-area coatings
Zeng, L., Chen, S., Forberich, K., Brabec, C. J., Mai, Y., & Guo, F. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02575e · Cited by 158
Low‐Bandgap Organic Bulk‐Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells
Wu, S., Li, Z., Zhang, J., Wu, X., Deng, X., Liu, Y., Zhou, J., Zhi, C., Yu, X., Choy, W. C. H., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105539 · Cited by 159
Inorganic p-type contact materials for perovskite-based solar cells
Li, M.-H., Shen, P.-S., Wang, K.-C., Guo, T.-F., & Chen, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06425a · Cited by 158
Laser Crystallization of Organic–Inorganic Hybrid Perovskite Solar Cells
Jeon, T., Jin, H. M., Lee, S. H., Lee, J. M., Park, H. I., Kim, M. K., Lee, K. J., Shin, B., & Kim, S. O. (2016) · ACS Nano · doi:10.1021/acsnano.6b03815 · Cited by 160
Sun, Z., Zeb, A., Liu, S., Ji, C., Khan, T. M., Li, L., Hong, M., & Luo, J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201606079 · Cited by 159
Yang, D., Lv, J., Zhao, X., Xu, Q., Fu, Y., Zhan, Y., Zunger, A., & Zhang, L. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03221 · Cited by 155
Pham, N. D., Tiong, V. T., Chen, P., Wang, L., Wilson, G. J., Bell, J. M., & Wang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta11139d · Cited by 158
Dong, C., Han, X., Zhao, Y., Li, J., Chang, L., & Zhao, W. (2018) · Solar RRL · doi:10.1002/solr.201800139 · Cited by 159
Ghosh, S., & Singh, T. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.06.024 · Cited by 159
Two-Dimensional Material Interface Engineering for Efficient Perovskite Large-Area Modules
Agresti, A., Pescetelli, S., Palma, A. L., Martín-García, B., Najafi, L., Bellani, S., Moreels, I., Prato, M., Bonaccorso, F., & Di Carlo, A. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01151 · Cited by 158
Wang, H., Li, H., Cai, W., Zhang, P., Cao, S., Chen, Z., & Zang, Z. (2020) · Nanoscale · doi:10.1039/d0nr03408h · Cited by 158
Liang, Z., Zhang, S., Xu, X., Wang, N., Wang, J., Wang, X., Bi, Z., Xu, G., Yuan, N., & Ding, J. (2015) · RSC Advances · doi:10.1039/c5ra09110a · Cited by 157
Organohalide Perovskites for Solar Energy Conversion
Lin, Q., Armin, A., Burn, P. L., & Meredith, P. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00483 · Cited by 157
Zhang, T., Guo, N., Li, G., Qian, X., & Zhao, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.003 · Cited by 158
Wozny, S., Yang, M., Nardes, A. M., Mercado, C. C., Ferrere, S., Reese, M. O., Zhou, W. L., & Zhu, K. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01691 · Cited by 157
Zhang, Y., Fei, Z., Gao, P., Lee, Y., Fadaei‐Tirani, F., Scopelliti, R., Feng, Y., Dyson, P. J., & Nazeeruddin, M. K. (2017) · Advanced Materials · doi:10.1002/adma.201702157 · Cited by 157
Zhang, J., Xu, B., Li, Y., Ruan, C., Wang, L., Liu, P., Zhang, W., Vlachopoulos, N., Kloo, L. A., Boschloo, G. K., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701209 · Cited by 157
Device Performance of Emerging Photovoltaic Materials (Version 1)
Almora, O., Baran, D., Bazan, G. C., Berger, C. G., Cabrera, C. I., Catchpole, K., Erten‐Ela, S., Guo, F., Hauch, J., Ho-Baillie, A. W. Y., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002774 · Cited by 157
A comprehensive review of the current progresses and material advances in perovskite solar cells
Sharif, R., Khalid, A., Ahmad, S. W., Rehman, A., Qutab, H. G., Akhtar, H. H., Mahmood, K., Afzal, S., & Saleem, F. (2023) · Nanoscale Advances · doi:10.1039/d3na00319a · Cited by 173
“…solvents composed of dimethylsulphoxide (DMSO) and g -butyrolactone trailed by toluene drop-covering, which resulted in the form of smooth perovskite lm. 202,209,210 The droplet of toluene rapidly detached the extra DMSO solvent present in the wet layer, which directly satis ed the ingredients.”
BackgroundThe roles of alkyl halide additives in enhancing perovskite solar cell performance
Chueh, C., Liao, C., Zuo, F., Williams, S. T., Liang, P., & Jen, A. K. ‐. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05012f · Cited by 156
Ihly, R., Dowgiallo, A.-M., Yang, M., Schulz, P., Stanton, N. J., Reid, O. G., Ferguson, A. J., Zhu, K., Berry, J. J., & Blackburn, J. L. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03806e · Cited by 156
Multifunctional Benzoquinone Additive for Efficient and Stable Planar Perovskite Solar Cells
Qin, C., Matsushima, T., Fujihara, T., & Adachi, C. (2016) · Advanced Materials · doi:10.1002/adma.201603808 · Cited by 156
Landi, G., Neitzert, H. C., Barone, C., Mauro, C., Lang, F., Albrecht, S., Rech, B., & Pagano, S. (2017) · Advanced Science · doi:10.1002/advs.201700183 · Cited by 157
Wheeler, L. M., Moore, D. T., Ihly, R., Stanton, N. J., Miller, E. M., Tenent, R. C., Blackburn, J. L., & Neale, N. R. (2017) · Nature Communications · doi:10.1038/s41467-017-01842-4 · Cited by 156
“…or alkali metal cation and X is a halide) have demonstrated unprecedented potential as a photovoltaic (PV) absorber 10 and have also shown to reversibly form hydrates 11 – 14 and other compounds stabilized by charge-transfer complex bonds with nitrogen-15 – 17 and oxygen-donor molecules 18 – 20 .”
BackgroundFully Air-Bladed High-Efficiency Perovskite Photovoltaics
Ding, J., Han, Q., Ge, Q., Xue, D., Ma, J., Zhao, B., Chen, Y., Liu, J., Mitzi, D. B., & Hu, J. (2018) · Joule · doi:10.1016/j.joule.2018.10.025 · Cited by 156
Li, M., Zuo, W., Yang, Y., Aldamasy, M. H., Wang, Q., Turren‐Cruz, S., Feng, S., Saliba, M., Wang, Z., & Abate, A. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00782 · Cited by 156
Advances in design engineering and merits of electron transporting layers in perovskite solar cells
Pan, H., Zhao, X., Gong, X., Li, H., Ladi, N. H., Zhang, X., Huang, W., Ahmad, S., Ding, L., Shen, Y. F., et al. (2020) · Materials Horizons · doi:10.1039/d0mh00586j · Cited by 164
Progress in emerging solution-processed thin film solar cells – Part II: Perovskite solar cells
Habibi, M., Zabihi, F., Ahmadian‐Yazdi, M., & Eslamian, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.042 · Cited by 156
Efficient and stable perovskite solar cells with regulated depletion region
Shen, Z., Han, Q., Luo, X., Shen, Y., Wang, Y., Yuan, Y., Zhang, Y., Yang, Y., & Han, L. (2024) · Nature Photonics · doi:10.1038/s41566-024-01383-5 · Cited by 156
Bifunctional alkyl chain barriers for efficient perovskite solar cells
Zhang, J., Hu, Z., Huang, L., Yue, G., Liu, J., Lu, X., Hu, Z., Shang, M., Han, L., & Zhu, Y. (2015) · Chemical Communications · doi:10.1039/c5cc00128e · Cited by 155
Correa‐Baena, J., Turren‐Cruz, S., Tress, W., Hagfeldt, A., Aranda, C., Shooshtari, L., Bisquert, J., & Guerrero, A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00059 · Cited by 155
Recent progress in hybrid perovskite solar cells based on n-type materials
Wu, W., Chen, D., Caruso, R. A., & Cheng, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02376f · Cited by 155
Light-Emitting Halide Perovskite Nanoantennas
Tiguntseva, E. Y., Zograf, G. P., Komissarenko, F. E., Zuev, D. A., Zakhidov, A. A., Makarov, S. V., & Kivshar, Y. S. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04727 · Cited by 158
Li, X., Xie, Q., Jiang, J., Zhou, Y. J., & Huang, L. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2018.06.004 · Cited by 170
Wu, W., Wong, Y., Tan, Z., & Wu, J. (2018) · Catalysis Science & Technology · doi:10.1039/c8cy01240g · Cited by 157
Review on persistent challenges of perovskite solar cells’ stability
Rao, M. K., N, S. D., Selvakumar, M., Sudhakar, Y. N., & Mahesha, M. G. (2021) · Solar Energy · doi:10.1016/j.solener.2021.03.005 · Cited by 165
Interfacial Charge Transfer Anisotropy in Polycrystalline Lead Iodide Perovskite Films
Yin, J. L., Cortecchia, D., Krishna, A., Chen, S., Mathews, N., Grimsdale, A. C., & Soci, C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00431 · Cited by 154
Chang, J., Zhu, H., Li, B., Isikgor, F. H., Hao, Y., Xu, Q., & Ouyang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08398b · Cited by 154
Adhyaksa, G. W. P., Veldhuizen, L. W., Kuang, Y., Brittman, S., Schropp, R. E. I., & Garnett, E. C. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00466 · Cited by 154
Liu, J., Ozaki, M., Yakumaru, S., Handa, T., Nishikubo, R., Kanemitsu, Y., Saeki, A., Murata, Y., Murdey, R. J., & Wakamiya, A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808385 · Cited by 154
Lead-free halide double perovskites: Toward stable and sustainable optoelectronic devices
Bibi, A., Lee, I., Nah, Y., Allam, O. A., Kim, H., Quan, L. N., Tang, J., Walsh, A., Jang, S. S., Sargent, E. H., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2020.11.026 · Cited by 164
Li, S., Zhang, P., Wang, Y., Sarvari, H., Liu, D., Wu, J., Yang, Y., Wang, Z., & Chen, Z. D. (2016) · Nano Research · doi:10.1007/s12274-016-1407-0 · Cited by 153
Park, B., Jain, S. M., Zhang, X., Hagfeldt, A., Boschloo, G. K., & Edvinsson, T. (2015) · ACS Nano · doi:10.1021/nn507345e · Cited by 152
Niobium Doping Effects on TiO2 Mesoscopic Electron Transport Layer‐Based Perovskite Solar Cells
Kim, D. H., Han, G. S., Seong, W. M., Lee, J., Kim, B. J., Park, N., Hong, K. S., Lee, S., & Jung, H. S. (2015) · ChemSusChem · doi:10.1002/cssc.201403478 · Cited by 152
Xia, F., Wu, Q., Zhou, P., Li, Y., Chen, X. C., Liu, Q., Zhu, J., Dai, S., Lu, Y., & Yang, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03525 · Cited by 152
Light Illumination Induced Photoluminescence Enhancement and Quenching in Lead Halide Perovskite
Chen, S., Wen, X., Huang, S., Huang, F., Cheng, Y., Green, M. A., & Ho-Baillie, A. W. Y. (2016) · Solar RRL · doi:10.1002/solr.201600001 · Cited by 152
A Ga-doped SnO 2 mesoporous contact for UV stable highly efficient perovskite solar cells
Roose, B., Johansen, C. M., Dupraz, K., Jaouen, T., Aebi, P., Steiner, U., & Abate, A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07663k · Cited by 152
Shafi, P. M., Joseph, N., Thirumurugan, A., & Bose, A. C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.022 · Cited by 152
Almora, O., Cho, K. T., Aghazada, S., Zimmermann, I., Matt, G. J., Brabec, C. J., Nazeeruddin, M. K., & García-Belmonte, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.042 · Cited by 156
Tu, Y., Yang, X., Su, R., Luo, D., Cao, Y., Zhao, L., Liu, T., Yang, W., Zhang, Y., Xu, Z., et al. (2018) · Advanced Materials · doi:10.1002/adma.201805085 · Cited by 152
Self-citationChoi, M., Lee, Y.-S., Cho, I. H., Kim, S., Kim, D., Kwon, S., & Na, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104639 · Cited by 152
Inorganic hole transport layers in inverted perovskite solar cells: A review
Manohari, A. G., Karunakaran, S. K., Liu, C., Zhang, C., Guo, F., Wu, S., & Mai, Y. (2021) · Nano Select · doi:10.1002/nano.202000200 · Cited by 152
Device Performance of Emerging Photovoltaic Materials (Version 3)
Almora, O., Baran, D., Bazan, G. C., Berger, C., Cabrera, C. I., Catchpole, K., Erten-Ela, S., Guo, F., Hauch, J., Ho-Baillie, A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202203313 · Cited by 156
Ion‐Diffusion Management Enables All‐Interface Defect Passivation of Perovskite Solar Cells
Shen, L., Song, P., Zheng, L., Wang, L., Zhang, X., Liu, K., Liang, Y., Tian, W., Luo, Y., Qiu, J., et al. (2023) · Advanced Materials · doi:10.1002/adma.202301624 · Cited by 152
Yi, C., Li, X., Luo, J., Zakeeruddin, S. M., & Grätzel, M. (2016) · Advanced Materials · doi:10.1002/adma.201506049 · Cited by 151
Thermo-mechanical behavior of organic-inorganic halide perovskites for solar cells
Ramírez, C., Yadavalli, S. K., Garcés, H. F., Zhou, Y., & Padture, N. P. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.02.022 · Cited by 151
Li, H., Tong, G., Chen, T., Zhu, H., Li, G., Chang, Y., Wang, L., & Jiang, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03811b · Cited by 151
Interfacial Modification in Organic and Perovskite Solar Cells
Bi, S., Leng, X., Li, Y., Zheng, Z., Zhang, X., Zhang, Y., & Zhou, H. (2019) · Advanced Materials · doi:10.1002/adma.201805708 · Cited by 151
Thermochemical Stability of Hybrid Halide Perovskites
Senocrate, A., Kim, G. Y., Grätzel, M., & Maier, J. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01605 · Cited by 151
Bulk heterojunction gifts bismuth-based lead-free perovskite solar cells with record efficiency
Hu, W., He, X. H., Fang, Z., Lian, W., Shang, Y., Li, X., Zhou, W., Zhang, M., Chen, T., Lu, Y., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104362 · Cited by 151
Liu, J., Shirai, Y., Yang, X., Yue, Y., Chen, W., Wu, Y., Islam, A., & Han, L. (2015) · Advanced Materials · doi:10.1002/adma.201501489 · Cited by 150
Spectral splitting photovoltaics using perovskite and wideband dye-sensitized solar cells
Kinoshita, T., Nonomura, K., Jeon, N. J., Giordano, F., Abate, A., Uchida, S., Kubo, T., Seok, S. I., Nazeeruddin, M. K., Hagfeldt, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms9834 · Cited by 157
Self-citationBischak, C. G., Sanehira, E. M., Precht, J. T., Luther, J. M., & Ginsberg, N. S. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01917 · Cited by 152
High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact
Yin, X., Yao, Z., Luo, Q. G., Dai, X., Zhou, Y., Zhang, Y., Zhou, Y., Luo, S., Li, J., Wang, N., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13372 · Cited by 150
Guo, Y., Ma, J., Lei, H., Yao, F., Li, B., Xiong, L., & Fang, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00583d · Cited by 152
Performance analysis of perovskite solar cells in 2013–2018 using machine-learning tools
Odabaşı, Ç., & Yıldırım, R. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.069 · Cited by 150
Understanding the Solution Chemistry of Lead Halide Perovskites Precursors
Radicchi, E., Mosconi, E., Elisei, F., Nunzi, F., & Angelis, F. D. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00206 · Cited by 153
Functionalization of fullerene materials toward applications in perovskite solar cells
Jia, L., Chen, M., & Yang, S. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00295j · Cited by 150
Out-of-equilibrium processes in crystallization of organic-inorganic perovskites during spin coating
Pratap, S., Babbe, F., Barchi, N. S., Yuan, Z., Luong, T., Haber, Z., Song, T., Slack, J. L., Stan, C. V., Tamura, N., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25898-5 · Cited by 166
Recent defect passivation drifts and role of additive engineering in perovskite photovoltaics
Hassan, A., Wang, Z., Ahn, Y. H., Azam, M., Khan, A. A., Farooq, U., Zubair, M., & Cao, Y. L. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107579 · Cited by 152
Metadata
- Authors
- Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I.
- Affiliations
- Korea Research Institute of Chemical Technology (KR)
- Corresponding author
- Seok, Sang Il
- Venue
- Nature Materials
- Published
- 2014-07-06
- Volume
- 13
- Issue
- 9
- Pages
- 897-903
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2011472471
- Cited by
- 6,723
- References
- 25
- Citations by year
- 2026: 243 · 2025: 294 · 2024: 322 · 2023: 404 · 2022: 451 · 2021: 626 · 2020: 667 · 2019: 748 · 2018: 844 · 2017: 827 · 2016: 700 · 2015: 504 · 2014: 92
- FWCI
- 375.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- National Renewable Energy Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, solvent engineering, PTAA, hole transport materials, gamma-butyrolactone, dimethyl sulfoxide, mesoporous TiO2, planar heterojunction, power conversion efficiency, hysteresis, solution processing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.