Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Organolead trihalide perovskite materials have been successfully used as light absorbers in efficient photovoltaic cells. Two different cell structures, based on mesoscopic metal oxides and planar heterojunctions have already demonstrated very impressive advances in performance. Here, we report a bilayer architecture comprising the key features of mesoscopic and planar structures obtained by a fully solution-based process. We used CH3NH3 Pb(I(1-x)Br(x))3 (x = 0.1-0.15) as the absorbing layer and poly(triarylamine) as a hole-transporting material. The use of a mixed solvent of γ-butyrolactone and dimethylsulphoxide (DMSO) followed by toluene drop-casting leads to extremely uniform and dense perovskite layers via a CH3NH3I-PbI2-DMSO intermediate phase, and enables the fabrication of remarkably improved solar cells with a certified power-conversion efficiency of 16.2% and no hysteresis. These results provide important progress towards the understanding of the role of solution-processing in the realization of low-cost and highly efficient perovskite solar cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A calculation of the group index (n g ) of the mode based on refractive index (n) values obtained by P. Loeper and M. Stuckelberger [22] resulted in ng ≈ 6.”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [22]
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Self-citationLi, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Self-citation
Cited by
Items 801–900 of 1,012
Hot carrier photovoltaics in van der Waals heterostructures
Paul, K. K., Kim, J.-H., & Lee, Y. H. (2021) · Nature Reviews Physics · doi:10.1038/s42254-020-00272-4 · Cited by 180
Intermediate phase engineering of halide perovskites for photovoltaics
Xiang, W., Zhang, J., Liu, S. (., Albrecht, S., Hagfeldt, A., & Wang, Z. (2022) · Joule · doi:10.1016/j.joule.2021.11.013 · Cited by 178
Bai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Li, Q., Yang, Y., Wong, K. S., Chen, H., & Yang, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.019 · Cited by 184
Perovskite solar cells - An overview of critical issues
Djurišić, A. B., Liu, F. Z., Tam, H. W., Wong, M. K., Ng, A., Surya, C., Chen, W., & He, Z. B. (2017) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2017.05.002 · Cited by 182
Liu, M., Zhao, J., Luo, Z., Sun, Z., Pan, N., Ding, H., & Wang, X. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00537 · Cited by 181
Machine Learning for Predicting the Band Gaps of ABX3 Perovskites from Elemental Properties
Gladkikh, V., Kim, D. Y., Hajibabaei, A., Jana, A., Myung, C. W., & Kim, K. S. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b11768 · Cited by 182
New generation solar cells: concepts, trends and perspectives
Ragoussi, M.-E., & Torres, T. (2015) · Chemical Communications · doi:10.1039/c4cc09888a · Cited by 183
Mali, S. S., Shim, C. S., Park, H. K., Heo, J., Patil, P. S., & Hong, C. K. (2015) · Chemistry of Materials · doi:10.1021/cm504558g · Cited by 182
Photovoltaic Performance of Vapor-Assisted Solution-Processed Layer Polymorph of Cs3Sb2I9
Singh, A., Boopathi, K. M., Mohapatra, A., Chen, Y. F., Li, G., & Chu, C. W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16349 · Cited by 180
Cai, F., Yan, Y., Yao, J., Wang, P., Wang, H., Gurney, R. S., Liu, D., & Wang, T. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801985 · Cited by 182
Green fabrication of stable lead-free bismuth based perovskite solar cells using a non-toxic solvent
Jain, S. M., Edvinsson, T., & Durrant, J. R. (2019) · Communications Chemistry · doi:10.1038/s42004-019-0195-3 · Cited by 182
Water-induced MAPbBr3@PbBr(OH) with enhanced luminescence and stability
Liu, K.-K., Liu, Q., Yang, D.-W., Liang, Y.-C., Sui, L.-Z., Wei, J.-Y., Xue, G.-W., Zhao, W.-B., Wu, X.-Y., Dong, L., et al. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0283-2 · Cited by 182
Duan, X., Li, X., Tan, L., Huang, Z., Yang, J., Liu, G., Lin, Z., & Chen, Y. (2020) · Advanced Materials · doi:10.1002/adma.202000617 · Cited by 184
Zhang, C., Li, H., Gong, C., Zhuang, Q., Chen, J., & Zang, Z. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00413a · Cited by 180
Interface engineering for high-performance perovskite hybrid solar cells
Zhou, Z., Pang, S., Liu, Z., Xu, H., & Cui, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04340a · Cited by 178
Enhanced Efficiency and Stability of Perovskite Solar Cells Through Nd‐Doping of Mesostructured TiO2
Roose, B., Gödel, K. C., Pathak, S., Sadhanala, A., Baena, J. P. C., Wilts, B. D., Snaith, H. J., Wiesner, U., Grätzel, M., Steiner, U., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501868 · Cited by 176
Pazoki, M., Johansson, M. B., Zhu, H., Broqvist, P., Edvinsson, T., Boschloo, G., & Johansson, E. M. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11745 · Cited by 181
Ag-Incorporated Organic–Inorganic Perovskite Films and Planar Heterojunction Solar Cells
Chen, Q., Chen, L., Ye, F., Zhao, T., Tang, F., Rajagopal, A., Jiang, Z., Jiang, S., Jen, A. K.-Y., Xie, Y., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00847 · Cited by 178
High-Temperature–Short-Time Annealing Process for High-Performance Large-Area Perovskite Solar Cells
Kim, M., Kim, G.-H., Oh, K. S., Jo, Y., Yoon, H., Kim, K.-H., Lee, H., Kim, J. Y., & Kim, D. S. (2017) · ACS Nano · doi:10.1021/acsnano.7b02015 · Cited by 180
Wang, S., Li, Z., Zhang, Y., Liu, X., Han, J., Li, X., Liu, Z., (Frank) Liu, S., & Choy, W. C. H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900417 · Cited by 180
Li, P., Liu, X., Zhang, Y., Liang, C., Chen, G., Li, F., Su, M., Xing, G., Tao, X., & Song, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202000460 · Cited by 178
Lateral‐Structure Single‐Crystal Hybrid Perovskite Solar Cells via Piezoelectric Poling
Dong, Q., Song, J., Fang, Y., Shao, Y., Ducharme, S., & Huang, J. (2016) · Advanced Materials · doi:10.1002/adma.201505244 · Cited by 178
Chung, H., Jung, S. I., Kim, H. J., Cha, W., Sim, E., Kim, D., Koh, W., & Kim, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201611916 · Cited by 177
Kim, H., Lee, Y. H., Lyu, T., Yoo, J. H., Park, T., & Oh, J. H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05916k · Cited by 178
Stable and High‐Efficiency Methylammonium‐Free Perovskite Solar Cells
Gao, X., Luo, W., Zhang, Y., Hu, R., Zhang, B., Züttel, A., Feng, Y., & Nazeeruddin, M. K. (2020) · Advanced Materials · doi:10.1002/adma.201905502 · Cited by 179
Yoo, J. W., Jang, J., Kim, U., Lee, Y., Ji, S.-G., Noh, E., Hong, S., Choi, M., & Seok, S. I. (2021) · Joule · doi:10.1016/j.joule.2021.08.005 · Cited by 179
Self-citationPlanar Heterojunction Perovskite Solar Cells Incorporating Metal–Organic Framework Nanocrystals
Chang, T., Kung, C., Chen, H., Huang, T., Kao, S., Lu, H., Lee, M., Boopathi, K. M., Chu, C., & Ho, K. (2015) · Advanced Materials · doi:10.1002/adma.201502537 · Cited by 176
Lee, D.-Y., Na, S.-I., & Kim, S.-S. (2016) · Nanoscale · doi:10.1039/c5nr05271h · Cited by 177
Kawai, H., Giorgi, G., Marini, A., & Yamashita, K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00109 · Cited by 180
Abulikemu, M., Ould-Chikh, S., Miao, X., Alarousu, E., Murali, B., Ngongang Ndjawa, G. O., Barbé, J., El Labban, A., Amassian, A., & Del Gobbo, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04657f · Cited by 177
Ye, S., Rao, H., Yan, W., Li, Y., Sun, W., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Advanced Materials · doi:10.1002/adma.201603850 · Cited by 180
Zhao, P., Kim, B. J., Ren, X., Lee, D. G., Bang, G. J., Jeon, J. B., Kim, W. B., & Jung, H. S. (2018) · Advanced Materials · doi:10.1002/adma.201802763 · Cited by 177
Thermal properties of metal-halide perovskites
Haeger, T., Heiderhoff, R., & Riedl, T. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03754k · Cited by 177
Recent advances in interfacial engineering of perovskite solar cells
Ye, M., He, C., Iocozzia, J., Liu, X., Cui, X., Meng, X., Rager, M., Hong, X., Liu, X., & Lin, Z. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa7cb0 · Cited by 177
Kim, J., Park, B.-W., Baek, J., Yun, J. S., Kwon, H.-W., Seidel, J., Min, H., Coelho, S., Lim, S., Huang, S., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c00411 · Cited by 177
Self-citationInterfacial Molecular Doping of Metal Halide Perovskites for Highly Efficient Solar Cells
Jiang, Q., Ni, Z., Xu, G., Lin, Y., Rudd, P. N., Xue, R., Li, Y., Li, Y., Gao, Y., & Huang, J. (2020) · Advanced Materials · doi:10.1002/adma.202001581 · Cited by 179
Procedures and Practices for Evaluating Thin‐Film Solar Cell Stability
Roesch, R., Faber, T., von Hauff, E., Brown, T. M., Lira‐Cantu, M., & Hoppe, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501407 · Cited by 176
Liu, Q., Qin, M., Ke, W., Zheng, X., Chen, Z., Qin, P., Xiong, L., Lei, H., Wan, J., Wen, J., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600910 · Cited by 176
Caesium for Perovskite Solar Cells: An Overview
Bella, F., Renzi, P., Cavallo, C., & Gerbaldi, C. (2018) · Chemistry – A European Journal · doi:10.1002/chem.201801096 · Cited by 176
The Phosphine Oxide Route toward Lead Halide Perovskite Nanocrystals
Almeida, G., Ashton, O. J., Goldoni, L., Maggioni, D., Petralanda, U., Mishra, N., Akkerman, Q. A., Infante, I., Snaith, H. J., & Manna, L. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08978 · Cited by 177
Baloch, A. A. B., Alharbi, F. H., Grancini, G., Hossain, M. I., Nazeeruddin, M. K., & Tabet, N. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b07069 · Cited by 174
Chen, J., Kim, S.-G., Ren, X., Jung, H. S., & Park, N.-G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11977e · Cited by 175
Surface Properties of CH3NH3PbI3 for Perovskite Solar Cells
Haruyama, J., Sodeyama, K., Han, L., & Tateyama, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00452 · Cited by 176
Liao, H., Tam, T. L. D., Guo, P., Wu, Y., Manley, E. F., Huang, W., Zhou, N., Soe, C. M. M., Wang, B., Wasielewski, M. R., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600502 · Cited by 174
Hysteresis in organic-inorganic hybrid perovskite solar cells
Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.06.025 · Cited by 175
Improved efficiency and stability of Pb–Sn binary perovskite solar cells by Cs substitution
Liu, X., Yang, Z., Chueh, C.-C., Rajagopal, A., Williams, S. T., Sun, Y., & Jen, A. K.-Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07712a · Cited by 175
Efficacious engineering on charge extraction for realizing highly efficient perovskite solar cells
Yue, S., Liu, K., Xu, R., Li, M., Azam, M., Ren, K., Liu, J., Sun, Y., Wang, Z., Cao, D., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02685d · Cited by 177
Hu, L., Sun, K., Wang, M., Chen, W., Yang, B., Fu, J., Xiong, Z., Li, X., Tang, X., Zang, Z., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14592 · Cited by 174
A Review of the Role of Solvents in Formation of High-Quality Solution-Processed Perovskite Films
Cao, X., Zhi, L., Jia, Y., Li, Y., Zhao, K., Cui, X., Ci, L., Zhuang, D., & Wei, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16315 · Cited by 178
Huang, C.-Y., Li, H., Wu, Y., Lin, C.-H., Guan, X., Hu, L., Kim, J., Zhu, X., Zeng, H., & Wu, T. (2023) · Nano-Micro Letters · doi:10.1007/s40820-022-00983-6 · Cited by 173
Zheng, X., Chen, B., Wu, C., & Priya, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.023 · Cited by 174
14.8% perovskite solar cells employing carbazole derivatives as hole transporting materials
Sung, S. D., Kang, M. S., Choi, I. T., Kim, H. M., Kim, H., Hong, M., Kim, H. K., & Lee, W. I. (2014) · Chem. Commun. · doi:10.1039/c4cc06716a · Cited by 175
Jella, V., Ippili, S., Eom, J.-H., Pammi, S. V. N., Jung, J.-S., Tran, V.-D., Nguyen, V. H., Kirakosyan, A., Yun, S., Kim, D., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.038 · Cited by 174
Self-citationLi, Y., Cooper, J. K., Liu, W., Sutter-Fella, C. M., Amani, M., Beeman, J. W., Javey, A., Ager, J. W., Liu, Y., Toma, F. M., et al. (2016) · Nature Communications · doi:10.1038/ncomms12446 · Cited by 172
Teh, C. H., Daik, R., Lim, E. L., Yap, C. C., Ibrahim, M. A., Ludin, N. A., Sopian, K., & Mat Teridi, M. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06987h · Cited by 173
Gold and iodine diffusion in large area perovskite solar cells under illumination
Cacovich, S., Ciná, L., Matteocci, F., Divitini, G., Midgley, P. A., Di Carlo, A., & Ducati, C. (2017) · Nanoscale · doi:10.1039/c7nr00784a · Cited by 173
Recent progress and future prospects of perovskite tandem solar cells
Ho-Baillie, A. W. Y., Zheng, J., Mahmud, M. A., Ma, F.-J., McKenzie, D. R., & Green, M. A. (2021) · Applied Physics Reviews · doi:10.1063/5.0061483 · Cited by 172
Gu, Z., Zuo, L., Larsen-Olsen, T. T., Ye, T., Wu, G., Krebs, F. C., & Chen, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07008b · Cited by 171
Fabrication of metal-oxide-free CH3NH3PbI3perovskite solar cells processed at low temperature
Ryu, S., Seo, J., Shin, S. S., Kim, Y. C., Jeon, N. J., Noh, J. H., & Seok, S. I. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00011d · Cited by 173
Self-citationPark, M., Kim, H. J., Jeong, I., Lee, J., Lee, H., Son, H. J., Kim, D., & Ko, M. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501406 · Cited by 170
Zu, F., Amsalem, P., Salzmann, I., Wang, R., Ralaiarisoa, M., Kowarik, S., Duhm, S., & Koch, N. (2017) · Advanced Optical Materials · doi:10.1002/adom.201700139 · Cited by 172
Thermochromic Perovskite Inks for Reversible Smart Window Applications
De Bastiani, M., Saidaminov, M. I., Dursun, I., Sinatra, L., Peng, W., Buttner, U., Mohammed, O. F., & Bakr, O. M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05112 · Cited by 172
Chen, J., Lee, D., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07595 · Cited by 173
Perovskite nanomaterials as optical and electrochemical sensors
George K, J., Halali, V. V., C. G., S., Suvina, V., Sakar, M., & Balakrishna, R. G. (2020) · Inorganic Chemistry Frontiers · doi:10.1039/d0qi00306a · Cited by 176
Chen, H., Zhou, L., Fang, Z., Wang, S., Yang, T., Zhu, L., Hou, X., Wang, H., & Wang, Z. L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202011073 · Cited by 171
Toward Efficient Perovskite Solar Cells: Progress, Strategies, and Perspectives
Yoo, J. J., Shin, S. S., & Seo, J. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00592 · Cited by 169
Highly efficient planar perovskite solar cells with a TiO2/ZnO electron transport bilayer
Xu, X., Zhang, H., Shi, J., Dong, J., Luo, Y., Li, D., & Meng, Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04239a · Cited by 171
Solution-processed highly bright and durable cesium lead halide perovskite light-emitting diodes
Wei, Z., Perumal, A., Su, R., Sushant, S., Xing, J., Zhang, Q., Tan, S. T., Demir, H. V., & Xiong, Q. (2016) · Nanoscale · doi:10.1039/c6nr05330k · Cited by 171
Progress in Tandem Solar Cells Based on Hybrid Organic–Inorganic Perovskites
Chen, B., Zheng, X., Bai, Y., Padture, N. P., & Huang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602400 · Cited by 171
Overcoming the Challenges of Large-Area High-Efficiency Perovskite Solar Cells
Kim, J., Yun, J. S., Cho, Y., Lee, D. S., Wilkinson, B., Soufiani, A. M., Deng, X., Zheng, J., Shi, A., Lim, S., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00573 · Cited by 168
Interfacial electronic structure at the CH3NH3PbI3/MoOx interface
Liu, P., Liu, X., Lyu, L., Xie, H., Zhang, H., Niu, D., Huang, H., Bi, C., Xiao, Z., Huang, J., et al. (2015) · Applied Physics Letters · doi:10.1063/1.4921339 · Cited by 169
Two‐Step Sequential Deposition of Organometal Halide Perovskite for Photovoltaic Application
Chen, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605654 · Cited by 171
Recent efficient strategies for improving the moisture stability of perovskite solar cells
Li, F., & Liu, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01325f · Cited by 170
Todorov, T. K., Singh, S., Bishop, D. M., Gunawan, O., Lee, Y. S., Gershon, T. S., Brew, K. W., Antunez, P. D., & Haight, R. (2017) · Nature Communications · doi:10.1038/s41467-017-00582-9 · Cited by 168
Gao, L., Spanopoulos, I., Ke, W., Huang, S., Hadar, I., Chen, L., Li, X., Yang, G., & Kanatzidis, M. G. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00930 · Cited by 172
Ionic Liquids-Enabled Efficient and Stable Perovskite Photovoltaics: Progress and Challenges
Niu, T., Chao, L., Gao, W., Ran, C., Song, L., Chen, Y., Fu, L., & Huang, W. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02696 · Cited by 167
Recent progress in perovskite solar cells: material science
Shao, J.-Y., Li, D., Shi, J., Ma, C., Wang, Y., Liu, X., Jiang, X., Hao, M., Zhang, L., Liu, C., et al. (2023) · Science China Chemistry · doi:10.1007/s11426-022-1445-2 · Cited by 169
Ligand-Hole in [SnI6] Unit and Origin of Band Gap in Photovoltaic Perovskite Variant Cs2SnI6
Xiao, Z., Lei, H., Zhang, X., Zhou, Y., Hosono, H., & Kamiya, T. (2015) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20150110 · Cited by 167
Bhaumik, S., Veldhuis, S. A., Ng, Y. F., Li, M., Muduli, S. K., Sum, T. C., Damodaran, B., Mhaisalkar, S., & Mathews, N. (2016) · Chemical Communications · doi:10.1039/c6cc01056c · Cited by 170
Duong, T., Mulmudi, H. K., Shen, H., Wu, Y., Barugkin, C., Mayon, Y. O., Nguyen, H. T., Macdonald, D., Peng, J., Lockrey, M., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.10.027 · Cited by 172
Du, T., Xu, W., Xu, S., Ratnasingham, S. R., Lin, C.-T., Kim, J., Briscoe, J., McLachlan, M. A., & Durrant, J. R. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03390a · Cited by 165
Morphology control of the perovskite films for efficient solar cells
Zheng, L., Zhang, D., Ma, Y., Lu, Z., Chen, Z., Wang, S., Xiao, L., & Gong, Q. (2015) · Dalton Transactions · doi:10.1039/c4dt03869j · Cited by 168
Zhu, P., Gu, S., Shen, X., Xu, N., Tan, Y., Zhuang, S., Deng, Y., Lu, Z., Wang, Z., & Zhu, J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03504 · Cited by 168
Solvent effect on the hole-conductor-free fully printable perovskite solar cells
Chen, J., Xiong, Y., Rong, Y., Mei, A., Sheng, Y., Jiang, P., Hu, Y., Li, X., & Han, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.047 · Cited by 167
Shen, D., Yu, X., Cai, X., Peng, M., Ma, Y., Su, X., Xiao, L., & Zou, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta05635c · Cited by 167
Enhanced Charge Collection with Passivation Layers in Perovskite Solar Cells
Lee, Y. H., Luo, J., Son, M., Gao, P., Cho, K. T., Seo, J., Zakeeruddin, S. M., Grätzel, M., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505140 · Cited by 167
Ren, Y.-K., Ding, X.-H., Wu, Y.-H., Zhu, J., Hayat, T., Alsaedi, A., Xu, Y.-F., Li, Z.-Q., Yang, S.-F., & Dai, S.-Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06334b · Cited by 166
Mixed Sulfur and Iodide-Based Lead-Free Perovskite Solar Cells
Nie, R., Mehta, A., Park, B.-W., Kwon, H.-W., Im, J., & Seok, S. I. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11332 · Cited by 167
Self-citationMorphological and compositional progress in halide perovskite solar cells
Kim, H.-S., Hagfeldt, A., & Park, N.-G. (2019) · Chemical Communications · doi:10.1039/c8cc08653b · Cited by 168
Byranvand, M. M., Otero‐Martínez, C., Ye, J., Zuo, W., Manna, L., Saliba, M., Hoye, R. L. Z., & Polavarapu, L. (2022) · Advanced Optical Materials · doi:10.1002/adom.202200423 · Cited by 160
Synchronized crystallization in tin-lead perovskite solar cells
Zhang, Y., Li, C., Zhao, H., Yu, Z., Tang, X., Zhang, J., Chen, Z., Zeng, J., Zhang, P., Han, L., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-51361-2 · Cited by 205
“18) was conducted to probe the surface electronic structure.”
Light-induced effects on Spiro-OMeTAD films and hybrid lead halide perovskite solar cells
Sanchez, R. S., & Mas-Marza, E. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.03.024 · Cited by 166
“PS based solar cells have shown unprecedented phenomena; such as hysteretic behavior [2-5], slow dynamic processes [6], and photo-induced giant dielectric constant [7] [8], which seem to play a significant role on the ultimate performance of the devices and whose exact origin and implications remain still unclear.”
Shi, J., Li, F., Jin, Y., Liu, C., Cohen‐Kleinstein, B., Yuan, S., Li, Y., Wang, Z., Yuan, J., & Ma, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202010440 · Cited by 164
Gao, Q., Qi, J., Chen, K., Xia, M., Hu, Y., Mei, A., & Han, H. (2022) · Advanced Materials · doi:10.1002/adma.202200720 · Cited by 163
Kim, Y.-J., Dang, T.-V., Choi, H.-J., Park, B.-J., Eom, J.-H., Song, H.-A., Seol, D., Kim, Y., Shin, S.-H., Nah, J., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09662f · Cited by 164
Self-citationPang, S., Zhou, Y., Wang, Z., Yang, M., Krause, A. R., Zhou, Z., Zhu, K., Padture, N. P., & Cui, G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11824 · Cited by 164
Multifold Emission Enhancement in Nanoimprinted Hybrid Perovskite Metasurfaces
Makarov, S. V., Milichko, V., Ushakova, E. V., Omelyanovich, M., Cerdan Pasaran, A., Haroldson, R., Balachandran, B., Wang, H., Hu, W., Kivshar, Y. S., et al. (2017) · ACS Photonics · doi:10.1021/acsphotonics.6b00940 · Cited by 168
Efficient Planar Perovskite Solar Cells Using Passivated Tin Oxide as an Electron Transport Layer
Lee, Y., Lee, S., Seo, G., Paek, S., Cho, K. T., Huckaba, A. J., Calizzi, M., Choi, D., Park, J., Lee, D., et al. (2018) · Advanced Science · doi:10.1002/advs.201800130 · Cited by 166
Liu, X., Liu, Z., Sun, B., Tan, X., Ye, H., Tu, Y., Shi, T., Tang, Z., & Liao, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.031 · Cited by 167
Low‐Temperature Fabrication of Efficient Wide‐Bandgap Organolead Trihalide Perovskite Solar Cells
Bi, C., Yuan, Y., Fang, Y., & Huang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401616 · Cited by 164
Metadata
- Authors
- Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I.
- Affiliations
- Korea Research Institute of Chemical Technology (KR)
- Corresponding author
- Seok, Sang Il
- Venue
- Nature Materials
- Published
- 2014-07-06
- Volume
- 13
- Issue
- 9
- Pages
- 897-903
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2011472471
- Cited by
- 6,723
- References
- 25
- Citations by year
- 2026: 243 · 2025: 294 · 2024: 322 · 2023: 404 · 2022: 451 · 2021: 626 · 2020: 667 · 2019: 748 · 2018: 844 · 2017: 827 · 2016: 700 · 2015: 504 · 2014: 92
- FWCI
- 375.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- National Renewable Energy Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, solvent engineering, PTAA, hole transport materials, gamma-butyrolactone, dimethyl sulfoxide, mesoporous TiO2, planar heterojunction, power conversion efficiency, hysteresis, solution processing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.