Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Organolead trihalide perovskite materials have been successfully used as light absorbers in efficient photovoltaic cells. Two different cell structures, based on mesoscopic metal oxides and planar heterojunctions have already demonstrated very impressive advances in performance. Here, we report a bilayer architecture comprising the key features of mesoscopic and planar structures obtained by a fully solution-based process. We used CH3NH3 Pb(I(1-x)Br(x))3 (x = 0.1-0.15) as the absorbing layer and poly(triarylamine) as a hole-transporting material. The use of a mixed solvent of γ-butyrolactone and dimethylsulphoxide (DMSO) followed by toluene drop-casting leads to extremely uniform and dense perovskite layers via a CH3NH3I-PbI2-DMSO intermediate phase, and enables the fabrication of remarkably improved solar cells with a certified power-conversion efficiency of 16.2% and no hysteresis. These results provide important progress towards the understanding of the role of solution-processing in the realization of low-cost and highly efficient perovskite solar cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A calculation of the group index (n g ) of the mode based on refractive index (n) values obtained by P. Loeper and M. Stuckelberger [22] resulted in ng ≈ 6.”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [22]
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Self-citationLi, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Self-citation
Cited by
Items 101–200 of 1,012
Chen, M., Ju, M.-G., Garces, H. F., Carl, A. D., Ono, L. K., Hawash, Z., Zhang, Y., Shen, T., Qi, Y., Grimm, R. L., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07951-y · Cited by 759
Ionic polarization-induced current–voltage hysteresis in CH3NH3PbX3 perovskite solar cells
Meloni, S., Moehl, T., Tress, W., Franckevičius, M., Saliba, M., Lee, Y. H., Gao, P., Nazeeruddin, M. K., Zakeeruddin, S. M., Rothlisberger, U., et al. (2016) · Nature Communications · doi:10.1038/ncomms10334 · Cited by 761
Hao, F., Stoumpos, C. C., Guo, P., Zhou, N., Marks, T. J., Chang, R. P. H., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06658 · Cited by 759
Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells
Shao, Y., Yuan, Y., & Huang, J. (2016) · Nature Energy · doi:10.1038/nenergy.2015.1 · Cited by 757
“…,7,7 (cid:48) -tetrakis-( N , N di-p-methoxyphenylamine) 9,9 (cid:48) -spirobifluorene (spiro-OMeTAD) 5,6,22 , phenyl-C61-butyric acid methyl ester (PCBM; refs 19,23,24) and poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA; refs 17,23), indicates they have a high degree of energy disorder.”
BackgroundOrigin of J–V Hysteresis in Perovskite Solar Cells
Chen, B., Yang, M., Priya, S., & Zhu, K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00215 · Cited by 749
Jesper Jacobsson, T., Correa-Baena, J.-P., Pazoki, M., Saliba, M., Schenk, K., Grätzel, M., & Hagfeldt, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00030d · Cited by 753
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Light-activated photocurrent degradation and self-healing in perovskite solar cells
Nie, W., Blancon, J.-C., Neukirch, A. J., Appavoo, K., Tsai, H., Chhowalla, M., Alam, M. A., Sfeir, M. Y., Katan, C., Even, J., et al. (2016) · Nature Communications · doi:10.1038/ncomms11574 · Cited by 743
Shi, Z., Guo, J., Chen, Y., Li, Q., Pan, Y., Zhang, H., Xia, Y., & Huang, W. (2017) · Advanced Materials · doi:10.1002/adma.201605005 · Cited by 735
Hirai, M., Tanaka, N., Sakai, M., & Yamaguchi, S. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00637 · Cited by 730
Yan, K., Long, M., Zhang, T., Wei, Z., Chen, H., Yang, S., & Xu, J. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00321 · Cited by 739
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
First-Principles Study of Ion Diffusion in Perovskite Solar Cell Sensitizers
Haruyama, J., Sodeyama, K., Han, L., & Tateyama, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03615 · Cited by 735
Interfacial Control Toward Efficient and Low‐Voltage Perovskite Light‐Emitting Diodes
Wang, J., Wang, N., Jin, Y., Si, J., Tan, Z., Du, H., Cheng, L., Dai, X., Bai, S., He, H., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405217 · Cited by 723
Making and Breaking of Lead Halide Perovskites
Manser, J. S., Saidaminov, M. I., Christians, J. A., Bakr, O. M., & Kamat, P. V. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00455 · Cited by 727
Lee, B., Stoumpos, C. C., Zhou, N., Hao, F., Malliakas, C., Yeh, C.-Y., Marks, T. J., Kanatzidis, M. G., & Chang, R. P. H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508464w · Cited by 721
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Oga, H., Saeki, A., Ogomi, Y., Hayase, S., & Seki, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506936f · Cited by 712
Domanski, K., Roose, B., Matsui, T., Saliba, M., Turren-Cruz, S.-H., Correa-Baena, J.-P., Carmona, C. R., Richardson, G., Foster, J. M., De Angelis, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03352k · Cited by 717
Qualifying composition dependent p and n self-doping in CH3NH3PbI3
Wang, Q., Shao, Y., Xie, H., Lyu, L., Liu, X., Gao, Y., & Huang, J. (2014) · Applied Physics Letters · doi:10.1063/1.4899051 · Cited by 645
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Li, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Self-citationHeterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
A polymer scaffold for self-healing perovskite solar cells
Zhao, Y., Wei, J., Li, H., Yan, Y., Zhou, W., Yu, D., & Zhao, Q. (2016) · Nature Communications · doi:10.1038/ncomms10228 · Cited by 667
Electron–phonon interaction in efficient perovskite blue emitters
Gong, X., Voznyy, O., Jain, A., Liu, W., Sabatini, R., Piontkowski, Z., Walters, G., Bappi, G., Nokhrin, S., Bushuyev, O., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0081-x · Cited by 662
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Meng, L., You, J., Guo, T.-F., & Yang, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00404 · Cited by 659
Thin single crystal perovskite solar cells to harvest below-bandgap light absorption
Chen, Z., Dong, Q., Liu, Y., Bao, C., Fang, Y., Lin, Y., Tang, S., Wang, Q., Xiao, X., Bai, Y., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-02039-5 · Cited by 664
Review on the Application of SnO2 in Perovskite Solar Cells
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802757 · Cited by 653
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Advances in Perovskite Solar Cells
Zuo, C., Bolink, H. J., Han, H., Huang, J., Cahen, D., & Ding, L. (2016) · Advanced Science · doi:10.1002/advs.201500324 · Cited by 654
Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells
Yao, J., Kirchartz, T., Vezie, M. S., Faist, M. A., Gong, W., He, Z., Wu, H., Troughton, J., Watson, T., Bryant, D., et al. (2015) · Physical Review Applied · doi:10.1103/physrevapplied.4.014020 · Cited by 657
Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
The dynamics of methylammonium ions in hybrid organic–inorganic perovskite solar cells
Leguy, A. M. A., Frost, J. M., McMahon, A. P., Sakai, V. G., Kockelmann, W., Law, C., Li, X., Foglia, F., Walsh, A., O’Regan, B. C., et al. (2015) · Nature Communications · doi:10.1038/ncomms8124 · Cited by 647
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Perovskites for Light Emission
Quan, L. N., García de Arquer, F. P., Sabatini, R. P., & Sargent, E. H. (2018) · Advanced Materials · doi:10.1002/adma.201801996 · Cited by 620
Bulk heterojunction perovskite–PCBM solar cells with high fill factor
Chiang, C.-H., & Wu, C.-G. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.3 · Cited by 624
Saliba, M., Correa-Baena, J.-P., Wolff, C. M., Stolterfoht, M., Phung, N., Albrecht, S., Neher, D., & Abate, A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00136 · Cited by 618
Solar-Driven Metal Halide Perovskite Photocatalysis: Design, Stability, and Performance
Huang, H., Pradhan, B., Hofkens, J., Roeffaers, M. B. J., & Steele, J. A. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00058 · Cited by 613
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Assessing the toxicity of Pb- and Sn-based perovskite solar cells in model organism Danio rerio
Babayigit, A., Duy Thanh, D., Ethirajan, A., Manca, J., Muller, M., Boyen, H.-G., & Conings, B. (2016) · Scientific Reports · doi:10.1038/srep18721 · Cited by 609
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Importance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells
Song, T.-B., Yokoyama, T., Stoumpos, C. C., Logsdon, J., Cao, D. H., Wasielewski, M. R., Aramaki, S., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10734 · Cited by 598
Filterless narrowband visible photodetectors
Lin, Q., Armin, A., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.175 · Cited by 595
It's a trap! On the nature of localised states and charge trapping in lead halide perovskites
Jin, H., Debroye, E., Keshavarz, M., Scheblykin, I. G., Roeffaers, M. B. J., Hofkens, J., & Steele, J. A. (2020) · Materials Horizons · doi:10.1039/c9mh00500e · Cited by 589
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
Types of Solar Cells and Application
Mohammad Bagher, A. (2015) · American Journal of Optics and Photonics · doi:10.11648/j.ajop.20150305.17 · Cited by 574
“However, simple spin-coating does not yield homogenous layers, instead requiring the addition of other chemicals such as GBL, DMSO, and toluene drips.[51] Simple solution processing results in the presence of voids, platelets, and other defects in the layer, which would hinder the efficiency of a solar cell.”
BackgroundProgress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Kim, G. Y., Senocrate, A., Yang, T.-Y., Gregori, G., Grätzel, M., & Maier, J. (2018) · Nature Materials · doi:10.1038/s41563-018-0038-0 · Cited by 587
Löper, P., Stuckelberger, M., Niesen, B., Werner, J., Filipič, M., Moon, S.-J., Yum, J.-H., Topič, M., De Wolf, S., & Ballif, C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502471h · Cited by 587
High efficiency stable inverted perovskite solar cells without current hysteresis
Wu, C.-G., Chiang, C.-H., Tseng, Z.-L., Nazeeruddin, M. K., Hagfeldt, A., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00645g · Cited by 581
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
Cui, P., Wei, D., Ji, J., Huang, H., Jia, E., Dou, S., Wang, T., Wang, W., & Li, M. (2019) · Nature Energy · doi:10.1038/s41560-018-0324-8 · Cited by 573
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Two-Photon-Pumped Perovskite Semiconductor Nanocrystal Lasers
Xu, Y., Chen, Q., Zhang, C., Wang, R., Wu, H., Zhang, X., Xing, G., Yu, W. W., Wang, X., Zhang, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12662 · Cited by 574
High efficiency flexible perovskite solar cells using superior low temperature TiO2
Yang, D., Yang, R., Zhang, J., Yang, Z., (Frank) Liu, S., & Li, C. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02155c · Cited by 570
The Dawn of Lead‐Free Perovskite Solar Cell: Highly Stable Double Perovskite Cs2AgBiBr6 Film
Wu, C., Zhang, Q., Liu, Y., Luo, W., Guo, X., Huang, Z., Ting, H., Sun, W., Zhong, X., Wei, S., et al. (2018) · Advanced Science · doi:10.1002/advs.201700759 · Cited by 571
Flexible Hybrid Organic–Inorganic Perovskite Memory
Gu, C., & Lee, J.-S. (2016) · ACS Nano · doi:10.1021/acsnano.6b01643 · Cited by 566
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Yang, T., Gregori, G., Pellet, N., Grätzel, M., & Maier, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500014 · Cited by 553
Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance
Saliba, M., Correa‐Baena, J., Grätzel, M., Hagfeldt, A., & Abate, A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703226 · Cited by 545
Metal halide perovskite light emitters
Kim, Y.-H., Cho, H., & Lee, T.-W. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607471113 · Cited by 549
Self-citationPark, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Self-citationIodine Migration and its Effect on Hysteresis in Perovskite Solar Cells
Li, C., Tscheuschner, S., Paulus, F., Hopkinson, P. E., Kießling, J., Köhler, A., Vaynzof, Y., & Huettner, S. (2016) · Advanced Materials · doi:10.1002/adma.201503832 · Cited by 549
Multifunctional Energy Storage and Conversion Devices
Huang, Y., Zhu, M., Huang, Y., Pei, Z., Li, H., Wang, Z., Xue, Q., & Zhi, C. (2016) · Advanced Materials · doi:10.1002/adma.201601928 · Cited by 544
Roy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Jošt, M., Kegelmann, L., Korte, L., & Albrecht, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904102 · Cited by 538
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Yang, M., Zhang, T., Schulz, P., Li, Z., Li, G., Kim, D. H., Guo, N., Berry, J. J., Zhu, K., & Zhao, Y. (2016) · Nature Communications · doi:10.1038/ncomms12305 · Cited by 540
“Ultrasmooth perovskite films are usually prepared by the solvent-engineering, fast-crystallization process, and/or Lewis base adduct approaches 8,19–21 .”
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Triarylamine: Versatile Platform for Organic, Dye-Sensitized, and Perovskite Solar Cells
Wang, J., Liu, K., Ma, L., & Zhan, X. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00432 · Cited by 536
Efficient Semitransparent Perovskite Solar Cells with Graphene Electrodes
You, P., Liu, Z., Tai, Q., Liu, S., & Yan, F. (2015) · Advanced Materials · doi:10.1002/adma.201501145 · Cited by 536
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Recent progress in flexible–wearable solar cells for self-powered electronic devices
Hashemi, S. A., Ramakrishna, S., & Aberle, A. G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03046h · Cited by 527
Jodlowski, A. D., Roldán-Carmona, C., Grancini, G., Salado, M., Ralaiarisoa, M., Ahmad, S., Koch, N., Camacho, L., de Miguel, G., & Nazeeruddin, M. K. (2017) · Nature Energy · doi:10.1038/s41560-017-0054-3 · Cited by 533
High-performance quasi-2D perovskite light-emitting diodes: from materials to devices
Zhang, L., Sun, C., He, T., Jiang, Y., Wei, J., Huang, Y., & Yuan, M. (2021) · Light: Science & Applications · doi:10.1038/s41377-021-00501-0 · Cited by 522
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Nam, J. K., Chai, S. U., Cha, W., Choi, Y. J., Kim, W., Jung, M. S., Kwon, J., Kim, D., & Park, J. H. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00050 · Cited by 524
Soe, C. M. M., Stoumpos, C. C., Kepenekian, M., Traoré, B., Tsai, H., Nie, W., Wang, B., Katan, C., Seshadri, R., Mohite, A. D., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09096 · Cited by 521
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Acoustic-optical phonon up-conversion and hot-phonon bottleneck in lead-halide perovskites
Yang, J., Wen, X., Xia, H., Sheng, R., Ma, Q., Kim, J., Tapping, P., Harada, T., Kee, T. W., Huang, F., et al. (2017) · Nature Communications · doi:10.1038/ncomms14120 · Cited by 503
“It is worth emphasizing that processes (3)–(5) are inefficient in conventional semiconductors whose acoustic phonons can easily propagate away along with the hot carrier cooling.”
BackgroundInfluentialPlanar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Rational Design of Halide Double Perovskites for Optoelectronic Applications
Zhao, X.-G., Yang, D., Ren, J.-C., Sun, Y., Xiao, Z., & Zhang, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.017 · Cited by 508
Tailoring the Energy Landscape in Quasi-2D Halide Perovskites Enables Efficient Green-Light Emission
Quan, L. N., Zhao, Y., García de Arquer, F. P., Sabatini, R., Walters, G., Voznyy, O., Comin, R., Li, Y., Fan, J. Z., Tan, H., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00976 · Cited by 510
Jang, D. M., Park, K., Kim, D. H., Park, J., Shojaei, F., Kang, H. S., Ahn, J.-P., Lee, J. W., & Song, J. K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01430 · Cited by 504
Almora, O., Zarazua, I., Mas-Marza, E., Mora-Sero, I., Bisquert, J., & Garcia-Belmonte, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00480 · Cited by 503
Baran, D., Kirchartz, T., Wheeler, S., Dimitrov, S., Abdelsamie, M., Gorman, J., Ashraf, R. S., Holliday, S., Wadsworth, A., Gasparini, N., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02598f · Cited by 504
Exsolution trends and co-segregation aspects of self-grown catalyst nanoparticles in perovskites
Kwon, O., Sengodan, S., Kim, K., Kim, G., Jeong, H. Y., Shin, J., Ju, Y.-W., Han, J. W., & Kim, G. (2017) · Nature Communications · doi:10.1038/ncomms15967 · Cited by 500
“The reductions of CoO and NiO to metallic Co and Ni are thermodynamically favourable at 1000 K due to the negative value of DGr for the CoO (equation (4)) and NiO (equation (5)) reductions23.”
BackgroundZhu, Z., Bai, Y., Liu, X., Chueh, C., Yang, S., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201600619 · Cited by 499
Metadata
- Authors
- Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I.
- Affiliations
- Korea Research Institute of Chemical Technology (KR)
- Corresponding author
- Seok, Sang Il
- Venue
- Nature Materials
- Published
- 2014-07-06
- Volume
- 13
- Issue
- 9
- Pages
- 897-903
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2011472471
- Cited by
- 6,723
- References
- 25
- Citations by year
- 2026: 243 · 2025: 294 · 2024: 322 · 2023: 404 · 2022: 451 · 2021: 626 · 2020: 667 · 2019: 748 · 2018: 844 · 2017: 827 · 2016: 700 · 2015: 504 · 2014: 92
- FWCI
- 375.41
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- National Renewable Energy Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, solvent engineering, PTAA, hole transport materials, gamma-butyrolactone, dimethyl sulfoxide, mesoporous TiO2, planar heterojunction, power conversion efficiency, hysteresis, solution processing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.